12-apr-24
Workover Rigs For Sale
Pole Rigs
CABOT 750 WORKOVER RIG (Ref#652T)
Refurbished, 700 hp, Double drum 2042 drawwroks with Parmac 202 brake assist, (2) Caterpillar 3406 Engines, (2) rebuilt Allison 750 6 speed auto transmission with reverse. 112' x 300,000 # hook load capacity on 8 lines, clear height 97 feet, leg spread 7' 6-1/2", racking board, oil bath chain case, elevated rotary drive, all raising lines and guidelines. The Draw-works, hydro-mantic break, and crown assembly have been rebuilt. Heavy duty Draw works drive propeller shaft through right angle gear box, rotary drive propeller shaft, heavy duty reverse gear box and oil bath roller chain, and a self-locking handling winch. Mounted on triple front axle mechanical 6 axle carrier with 134,000# capacity designed to meet highway safety standards with necessary toughness for off road operations. Price: $265,000
Rotary tables available at extra cost.
CABOT FRANKS 500 WELL SERVICE RIG (Ref#1624Tb)
Completely refurbished, updated and rebuilt in 2007, 102’ x 250,000# derrick, Category 4 certified inspection in 2007, Category 3 certified inspection 2018, mounted on 5 axle carrier, Detroit series 60 engine (475 hp), Webasto diesel heater, Allison 5960 6-speed transmission, McKissick traveling blocks 100 tons with 6’ King bales and rod clevis, 1” drill line, 16000’ 9/16” sandline, Parmac 15 double hydromatic brake, 16’ x 4’ base beam, Oil Country 5500 hydraulic tubing tong with air backups (jaws and bushings one set each for 1-3/8”, 2-7/8”, 3-1/2” and 4-1/2”), BJ tubing elevators 2-3/8”, 2-7/8” and 3-1/2”, Cavins CHD air slips with 2-3/8”, 2-7/8” and 3-1/2” dies and bodies (bolt on wiping plate), Carter Mark 4 hydraulic rod tongs with heads and backups one set for ¾” – 7/8”, one set 1”, O’Bannon rod elevators, Ratigan 40 ton rod hook, O’Bannon rod transfers ¾” – 7/8” and 1”, O’Bannon rod fishing tools and back off tool, hand tools, pipe wrenches, Guiberson Oil saver, heated crew trailer (doghouse), 2007 H&H flatbed tool trailer, 2 hydraulic winches.
Recent improvements:
Installed heavy duty right angle box
Redesigned operator control box for functionality
Revamped air system
Upgraded hydraulic system
New floor
Rebuilt drawworks
New handrails on rig
New Allison 5960 transmission
Added gear drive tongs
New stairs
Price: $375,000
HUBBARD C400 SERVICE RIG (Ref#274Tb)
Manufactured 2014, 72’ x 180,000# derrick on 4-line (250,000# on 6-line), mounted on 5 axle carrier, Detroit Series 60, Allison transmission, all hydraulic, 8000’ of 5/8” sandline, 100 ton McKissick casing blocks, 1” line 42” x 12” casing drum, 42” x 12” sand drum, disc assist on casing drum, 1500 hours, 3000 miles. Westco power tongs 1-1/2”, 2”, 2-7/8” and 5-1/2”, set of bails/links, tubing elevators 1-1/2” – 2”, rod hook, elevators, wrenches, swab tools, Martin Decker weight indicator, stored inside Price: $620,000
IRONTECH SR42 SERVICE RIG (Ref#970Tb)
Built 2005, 104’ x 225,000# telescopic double free-standing mast, 42” x 10” drawworks, 38” x 8” sandline, Detroit Series 60 engine, Allision 5860 transmission, mounted on 5 axle carrier tandem steer/tri-drive, Level IV completed in 2014 (16,270 CAODC mast hours remaining) Price: $755,000 CDN (approx. $600,000 USD)
COOPER LTO-550 WORKOVER RIG (Ref#900T)
Derrick fell onto rig when being raised, derrick would need to be replaced or repaired. Built 1981, double drum, 42 x 12, 42 x 8, swab drum removed from jack shaft, 5-axle back in carrier, 250,000# derrick with double racking board and triple rod basket, Cat 3408, CLT 5860 transmission, Cooper right angle box, 4 hydraulic leveling jacks, air rod transfer in derrick, hydraulic winch, Kerr 6 cyd 10000 psi Mustang pump powered from jack shaft, Kerr 3-valve release 10,000 psi, tong carrier f/Foster, steel work platform, Parmac 22 SR hydromatic brake. Extra rebuilt 3408 Cat engine. Price as is: $95,000
MOUNTAIN 550 WORKOVER RIG (Ref#4805Tb)
Built 2010, Detroit 60 Series engine, 5860 Allison transmission, 103’ x 250,000# mast, double triple, 2 winches, McKissick 100-ton spring loaded blocks, all lines, drill line, approx 13,000’ of 9/16” sandline, all guy lines, load lines, belly lines, floor lines and 2 winch lines all current tags. Excellent condition, currently working. Price: $420,000
XJ250 EXTENDA WORKOVER RIG (Ref#5948Ta)
Manufactured 2010/Refurbished 2016, 96’ A-leg x 160,000# derrick, double drum drawworks, 7/8” tubing line, 9/16” sand line, McKissick 2-sheave tubing block, Quadco weight indicator, Cat 3406E diesel engine with RY352 transmission (refurbished 2018), mounted on 3-axle carrier, single steering axle, driver’s cab, 4-way hydraulic outriggers, double tubing and double rod boards, elevator bells and sinker bar, set of power and manual rig tools, transmission needs work Price as is: $250,000
CROWN WTD-350 WORKOVER RIG (Ref#9969T)
Manufactured 2001, 71’ x 120,000# 4-leg stiff mast, Detroit Series 50 diesel engine, rod and tubing boards, ¾” tubing, 9/16” sandline, dual disc assist brake, adjustbe work platform, 2-station closing unit, mounted on Crown 5 axle carrier, Alliston CLT755 transmission, 2 PUllmaster hydraulic winches Price: $220,000
CRANE CARRIER WORKOVER RIG (Ref#685T)
Rebuilt 2010 to Level IV, Double drum drawworks, Detroit 6V53 diesel engine, Allison 5860 3-speed transmission, 60’ x 100,000# stiff mast derrick, 4 lines with 4’ well spacing, 35-ton McKissick block and hook (2) 17” sheaves 7/8” wire, 75-ton elevator bails with 25-ton elevator pickup adapter, working floor, stairs, handrails, lights, 20’ lubricator, 5000 winch with hook, tandem axle single steer drive carrier, located Canada Price: $120,000 USD
SERVICE KING SK-175 WORKOVER RIG (Ref#274Ta)
Manufactured 2008, 72’ x 150,000# derrick, Detroit Series 60 engine, mounted on 4 axle Crane Carrier, tooled out, Guiberson T60 air slips 100 ton casing blocks, Westco power tongs, currently working Price: $445,000
HOPPER GXXTA WELL SERVICE RIG (Ref#3000Tc)
Built 1980, 96’ x 210,000# derricK, Last used Mid 2021, runs and drives down the road POR
WILSON WELL SERVICE RIG (Ref#3000Ta) 103’ x 248,000# derrick, Out of service since 2017, lot of rust, will start and run and/or drive down the road POR
WILSON WELL SERVICE RIG (Ref#3000Tb)
103’ x 248,000# derrick, Last used December 2021, runs and drives down the road POR
WILSON 400 WORKOVER RIG (Ref#3179T)
500 hp, 60 Series engine, 5860 Allison transmission, 4 line Price: $122,500
https://youtube.com/shorts/M861jNHRK0Q?feature=share
https://youtube.com/shorts/HTq3UqeNEgA?feature=share
INGERSOLL RAND WELL SERVICE RIG (Ref#3000Td)
Single drum, 112’ x 310,000# derrick, carrier and derrick in good, cat, Cat engine does not run (full of rain water) Price: $150,000
GARDNER DENVER 3000 WELL SERVICE RIG (Ref#3000Te)
102’ x 200,000# derrick POR
INGERSOLL RAND WELL SERVICE RIG (Ref#3000Tf)
117’ x 350,000# derrick POR
COOPER LTO-650-2148 WELL SERVICE RIG (Ref#3000Tg)
Single drum, 118’ x 365,000# derrick Price: $180,000
WILSON MOGUL 42 WORKOVER RIG (Ref#1767T)
Double drum, 15,000’ of new 9/16” line, near new 4-line blocks, mounted on 5 axle Crane Carrier, 104’ x 250,000# mast, 750 Allison transmission, Detroit 60 series, New 100 Ton Block, Disc assist, Doghouse included Price: $125,000
WILSON 42 WORKOVER/DRILLING RIG (Ref#4044Ta)
Rebuilt 2010, double/triple, 8V92 Detroit with Turbo charger and after cooler, trailer mounted, single drum drawworks, Allison transmission 588 Series, 102’ x 225,000# derrick, gooseneck 3 axle trailer
7’ substructure, 44” rotary table
Trailer mounted 14” Gardner Denver pumps p/b (2) Detroit 6 cyl diesel engines, 3
Currently stacked
Price: $140,000
WILSON WORKOVER RIG (Ref#5259T)
WILSON 38 WORKOVER RIG (Ref#8814T)
70’ x 140,000# derrick, double drum, Cat 3406 400 hp engine, mounted on Wilson carrier (double rear with twin steer) tools, 2 outriggers in middle of carrier, 2 on back on H frame, sitting since 2021 Price: $117,500
UNIFLEX WORKOVER RIG (Ref#123T)
Manufactured 1983, 70' x 120,000# non telescoping stiff mast, double drum 26 x 8, Detroit 6V71 diesel engine, 740 Allison transmission with Spicer power divider, mounted on 4 axle carrier. Rig runs and truck drives, stacked for several years, good condition Price: $93,500 USD
CAMERON 550 WORKOVER RIG (Ref#2040Tc)
110’ x 250,000# Cooper derrick, Detroit 60 Series engine, 6061 Allison transmission, 6 axle Pettibone carrier, 3 front and 3 rear axles, drop box converted to air control, tubing drum, sand drum, 24” Wichita clutches Price: $315,000
WILSON SERVICE RIG (Ref#1121Tb)
96’ x 180,000# derrick, double drum, 10,000’ 1” sandline, 600’ 5/8” tubing line, Wilson 4 axle carrier, no tooling Price: $275,000
TAYLOR 550 WELL SERVICE RIG (Ref#9956Ta)
Manufactured 2009, Detroit 60 Series engine, 96' x 225,000# mast, mounted on 5 axle carrier, blocks, elevators, air slips, one owner Price: $420,000
TAYLOR 400 WORKOVER RIG (Ref#9214Tb)
Double triple, 96’ derrick, mounted on 2006 5 axle Crane Carrier, stored inside since 2018. doghouse Price: $325,000
FRANKS SERVICE RIG (Ref#1121Ta)
FRANKS 500 WORKOVER RIG (Ref#7615Tc)
Built 1980, refurbished 2018, 102' x 250,000# mast, mounted on 5 axle carrier, new engine and transmission, 150 ton blocks, 15,000’ sandline, ready to work Price: $495,000
FRANKS 400 WORKOVER RIG (Ref#7615Tb)
Built 1982, refurbished in 2018, 102' x 215,000# mast, mounted on 4 axle carrier, new engine and transmission, new drilling line, no sand line, 100 ton blocks, 2 winches, has not worked since refurbishment Price: $405,000
MOORE (CHINESE MADE) SERVICE RIG (Ref#9956Tb)
Manufactured 2004, Cat diesel engine, 96' x 250,000# mast, mounted on 5 axle carrier, blocks, elevators, air slips, needs new air lines Price: $170,000
CORSAIR 400 WORKOVER RIG (Ref#972T)
Manufactured 1981, double drum, Detroit Series 60 diesel engine, Allison 5860 transmission, single hydromatic, 102' x 215,000# Corsair Derrick (inspected 2017 w/papers), 100 Ton block, new drill and sandline, work floor with handrails, tools Price with tools, new paint and block inspection: $425,000
CORSAIR CRANE CARRIER W3284C (Ref#1683Rc)
Series 60 Detroit Diesel, 3180 Allison transmission, 96'- 215,000# mast & 42X12-42X8 Drawworks Price: $295,000
CRANE CARRIER WORKOVER RIG (Ref#148Ta)
Manufactured 1980, 96’ x 180,000# mast, Detroit 60 Series engine, Allison 5860 transmission, air over hydraulics, 650’ of 1” mainline, 10,000’ of 9/16” sandline, rig working daily Price: $290,000
Manufactured 1979, needs radiator put back on and fuel flushed. Price: $70,000
MESA WORKOVER RIG (Ref#148Tb) Manufactured 1980, 96’ x 180,000# mast, 8V92 Detroit Diesel engine, air over hydraulics, 650' of 1" mainline, 15,000' of 9/16" sandline, needs new compressor for engine and new rear end, sitting 4 years Price: $95,000
WILSON WORKOVER SWAB RIG (Ref#13398R)
Double drum Wilson Sr and Wilson JR drawworks, sandline capacity 10000' of 3/16", mounted on tandem axle, 1987 Freightliner tandem axle truck powered by Detroit diesel engine, 2 hydraulic leveling jacks, Detroit diesel on deck, 50' hydraulically raised mast, brand new hydraulic cylinder just replaced for lifting derrick, has pulled a minimum of 3000' wells, all new hydraulics PRICE: $147,500
WILSON MOGUEL 42 WELL SERVICE RIG (Ref#3177Tb) Two available, 96' x 280,000# mast, Detroit Series 60 engine, 5860 Allison transmission, mounted on 5 axle Wilson carrier, handling tools Price: $315,000
WILSON 42 WELL SERVICE RIG (Ref#7285T)
Manufactured 1981, Double drum, 96' x 180,000# mast, drawworks brakes and swab brakes both converted to new style brake system, Detroit 60 Series with Allison 5860 tranmsision, 16" double hydromatic brake, 1-1/8" hammered drill line, 9/16" swab line, (2) 6' balls, (5) anchors, 2-1/2" wash pipe with 2" kelly hoist, Oil Country 5500 open face tongues for up to 5-1/2", good tires, mounted on 5 axle carrier Price: $420,000
WILSON MOGUL 42 WELL SERVICE RIG (Ref#1915T)
double triple, tooled out, mounted on 4 axle carrier Price: $90,000
WILSON SUPER 38 (Ref#3307R) Double drum drawworks, friction clutches, Foster makeup and breakout catheads, Cummins 250 disel engine, Spicer 4 speed transmission, 70’ cantilever mast, 4-sheave crown block, racking board, mounted on 8’W x 22’L tandem axle trailer with folding walkways, mast base, 4 manual jacks, Budd wheels, National Ideal 75 ton 3-sheave block with hook, Price: $45,000
HOPPER GXXTA WORKOVER RIG (Ref#180N) Price: $450,000 OR BEST OFFER
Built 1980, 102' x 260,000# derrick, factory rebuilt Detroit 8V92T engine installed April 2010, inframe on motor 2015 derrick sandblasted and magnafluxed July 2006, new chain on main drum October 2017, brand new rear end and rear drive line and axels Sept 2016, new drill line and winch line November 2017.
Bowen 2.5 power swivel Rebuilt Feb. 2013
National JWS 185 mud pump, new fluid end 2007 w/ 180 bbl. Flat tank, new charge pump 2014. several jts. Hard line w/5000# guiberson unions, 4-2" 5000# hoses 15' long w/5000# guiberson unions, 6- 2" swivel Chicksans W/5000# guiberson unions
40' 2" 5000# Kelly hose w/5000# guiberson unions Kelly hose new 2017
Set pipe racks w/catwalk
2-3/8 tbg. Elevators New April 2013
2-7/8 tbg. Elevators New April 2013
3-1/2 tbg Elevators New April 2013
(2) Cavins type C slips
Set 2006 Gill tbg. Tongs (Fosters) W/heads 2-3/8 to 3-1/2, 4 1/2 W/air backups
Set Oil Country tbg. Tongs for parts.
Extra large work floor w/stairs and handrails
Base beam
2000 DCT tandem axle trailer
1994 DCT tandem axle trailer
2011 Spirit tandem axle dog house
2007 Quadco pad weight indicator W/new pads
2007 Quadco deadline indicator (new)
Pennant pad indicator w/pads
Geolograph Pioneer pad indicator
Set BJ rod tongs w/3/4-7/8 & 1" heads & backups
Set weatherford rod tongs w/3/4-7/8" heads and backups
Rod backoff tool
2- 3/4 -7/8 rod elevators
1" rod elevators
Rod tongs
Light tower (not working needs repair)
Several obannon rod fishing tools
150 ton McKissick 6 line block Rebuild 2013 and magnufluxed w/new bails & rod Basket.
Operator Platform can be moved to 3 different levels additional platform that can be put on at 22' for snubbing w/stairs and handrails.
Sinkerbar and jars, swab mandrills 2-3/8, 2-7/8, Double oilsaver W/pump
1-depthometer
2-Several tagged chains and slings
Good tires on steering axles
Several spare parts
May 2008: New sand line
July 2012: Steering axles completely rebuilt
January 2018: New Brakes and Drums on tag axels and main drive, New hoses to tongs, New hose to hydraulic tank to rig up panel
Price: $450,000 OR BEST OFFER
HYDRAULIC WORKOVER RIG WITH INTEGRATED CATWALK & SNUBBING CAPABILITIES (Ref#1268T)
Workover rig with 83’ telescoping derrick, 10’ crown extension, 200,000# lift capacity, 100,000# snubbing capacity. Catwalk with 42’ reach, forward and revere motion, hydraulic pipe slide, six portable pipe racks, powered by workover rig. 5000 ft/lb hydraulic rotary, 15k psi working pressure capability kelly hose, 300 ton mast with 5 x 5 heavy wall box tubing and 2 x 2 heavy wall cross sections, (2) mast raising cylinders, 9-1/8 x 25’ telescoping cylinders/crown sheaves with cable guides, (2) winch sheaves/snubbing sheaves, SRS fall protection, retractable flow tube design, non-swivel boom pole on curb side winch, (2) mast supports, 1” lifting cables, mounted on 5 axle Crane Carrier (3rd axle drop), with 375k Volvo Penta engine, 150 gal fuel capacity, hydraulic self-leveling components, 6 speed Allison transmission, 1:1 gear box, (2) 65 gpm pumps, (2) 30 gpm pumps, (1) 28 gpm Commercial shearing pump, 40 gal accumulator storage, single man cab, hydraulic leveling jacks Price on Request
240k SNUBBING UNIT (Ref#5833T)
Rigless snubbing unit, 4 cylinder hydraulic power jack, travel heavy slip, stationary heavy slip, hydraulic power rotary, upper basket, gin pole, tong arm, 240,000 lb max lifting force, 141,000 lb max snubbing force, 192” stroke length, 1 slips sets 1” – 5-1/2” 250,000 lb max load, 9000 ft/lb power rotary 70 rpm, 12’ x 3’8”H work basket, 2-section telescoping gin pole (44’ extended height from slip to sheave) 8000 lb max load, 6800 lb wireline winch capacity, (2) counter balance winches (500 lb max load), tong arm installed on lower section of gin pole. Skid mounted power pack w/Detroit 8V92 diesel engine, Dennison 3000 psi hydraulic pump, Funk 3-drive gear box, 385 gal hydraulic reservoir Make Offer
HOPPER RTA 750 RIG (Ref#1683Rf)
950 HP, Power- (2) Cat-3408, Transmission- (2) 5860 Allison, Mast- 120' 450,000#, 48" Drawworks, Parmac Hydromatic Brake & Hydraulic Anchor
Price: $575,000 PRICE REDUCED: $475,000
COOPER SP400 WELL SERVICE RIG (Ref#2040Td)
42 x 10 – 38 x 8 drawworks, 96’ x 215,000# telescoping mast hydraulically raised and scoped, 60 Series Detroit diesel engine (515 hp), CLBT 4460 Allison transmission, mounted on 4 axle carrier, 4 hyd leveling jacks, 2 hyd utility hoist, new rear axles with new tires, flotation front tires Price: $195,000
COOPER LTO WORKOVER RIG (Ref#3614Ta)
Year 2006, double drum, 8V71 Detroit diesel engine, 5860 Allison automatic transmission, mounted on 5 axle Crane Carrier, 108’ x 225,000# derrick, 100 ton McKissick 3-sheave block, fully tooled with 6’ bailers, 58-93 tongs, 2-3/8 and 2-7/8 elevators, 3/4 and 7/8 rod elevators and wrenches, eight indicator, laydown floor Price: $162,500
COOPER LTO-350 WORKOVER RIG (Ref#8562Ta)
Refurbished, Double/Triple, 96’ x 215,000# derrick, Detroit 60 Series, mounted on 4 axle carrier, 750 Allison transmission, sandline, 100 ton blocks, new air lines, tubing board, rod basket, working floor, operator’s platform Price: $102,500
COOPER LTO-350 (Ref#3177Ta) Manufactured 1982, 96' x 200,000# mast, Detroit Series 60 engine, Allison 5860 tranmssion, mounted on 4 axle Cooper carrier Price: $315,000
COOPER 350 WELL SERVICE UNIT (Ref#1683Ra)
Rig needs work. Detroit 8V-92 Diesel Eng, Allison 750 Trans, 42X12-38x8 drawworks w/dual disc assist, 97' 200,000# telescoping mast hydraulically raised & scoped, Mtd on 4-Axle Carrier w/Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, tong rack & Floatation Front Tires Price: $240,000
COOPER 150 DOUBLE DRUM WORKOVER RIG (Ref#14987T)
Pemco 71’ x 150,000# scoping derrick, Skytop traveling block, Detroit 6V53 engine on deck, hydraulic clutches, hydraulic outlet for power tongs, good cable, hydraulic lever for rig, mounted on 1985 Mack DM6 truck with 350 ES motor, has pulled 5500' with 2-7/8 Price: $115,000
COOPER WELL SERVICE RIG (Ref#592T)
72’ x 120,000# derrick, double drum, mounted on 4 axle Crane Carrier (carrier could use some work), 350 Cummins engine, drop box Price: $52,500
COOPER TC4210 (Ref#8440R)
Manufactured 1960’s, double drum, single rig mast, 64’ x 250,000# (tubing and rod racks), 70 ton blocks, 2 lines, Detroit diesel 60 gpm @ 2000 psi, hydraulic system, air clutch. Rig was refurbished 2013/2014 at a cost of $130,000: repairs included used 65’ derrick installed, new 1” main line, repairs to air system, hydraulic system upgrade, leveling jacks, derrick ljghting, tires, 70 ton blocks installed. But the rig has been sitting since 2015 and now needs rebuilding. It doesn’t run. Price as is: $19,500
CARDWELL KB200 (Ref#9140R)
Rig manufacture 1980, mounted on 1980 GMC Brigadier with Cat 3208 engine, includes elevators & misc tools, also includes 1996 1-ton Super Duty tool truck, tandem axle, Cat 3208 diesel, sitting 1-1/2 years Price: $92,500
CARDWELL KB200 WORKOVER RIG (Ref#9577T)
Manufactured 1979, DD, single/double Skytop 72' x 180,000# derrick, hydraulically raises & lowers, Detroit 50 series engine on deck, new Allison transmission (once put in gear it stays in gear) 75 ton Mckissick block, 6’ bales, mounted on 4 axle Crane Carrier with 6V92 Detroit engine, 4 hydraulic jacks, hydraulic lifting winch with new cable, 7000' of 9/16" new cable, 400' of 7/8" working line, hydraulic outriggers from and back, removable working floor, fully serviced and ready to work Price: $215,000
IDECO RAMBLER SERVICE RIG (Ref#11674Tc)
95’ x 212,000# Ideco telescoping derrick, 42 x 10 double drum drawworks, 100 ton McKissick block and hook, hydromatic, tubing board, monkey board, catwalks, railings, stairs, lights, ladders, mounted on 4 axle carrier, Detroit 8V71 diesel engine, Alliston CLT 5860-DB automatic transmission Price: $137,500
IDECO H37 WELL SERVICE RIG (Ref#1955Ta)
Detroit 60 series engine, mounted on 5 axle carrier, Allison transmission, carrier and double derrick Price: $54,500
King 4.0 power swivel availble at extra cost
MOUNTAIN MR350 SERVICE RIG (Ref#11674Th)
104’ x 225,000# telescoping double derrick, 42 x 10 double drum drawworks, hydromatic, 100 ton McKissick block and hook, mounted on tandem steer/tandem drive carrier, Cat 3406T diesel engine, Allison CLBT-5860-2 automatic transmission Price: $137,500
KREMCO 600 WORKOVER RIG (Ref#716N)
Manufactured 1991 (not used until 2005), 38 x 10 double drum, engine was removed, Allison 750 transmission, 18" twin disc cloutches, 48" double disc brake assist on main drum, water mist on both mai and sandline drums, main drum has 7/8" Lebus grooving, 104' x 240,000# mast, tubing board, rod basket, 13,500' of sandline, 875' of 7/8" swedgeline, 100 ton SOWA block, all mounted on tandem axle trailer Price: $375,000 PRICE REDUCED: $325,000
SKYTOP RIG PACKAGE (Ref#7014T)
Skytop Twin Steer/Tri Drive, Detroit diesel 60 Series, Allison 5860 transmission, 42” x 10” main drum, 38” x 8” sandline drum, Kobelt disk brake, crown saver, approx. 1650 hours on Level IV Recertification, 104’ x 225,000# telescopic mast.
BOP: 7-1/16” double gates and annular, 5000# working pressure
Rig Pump: 5 x 5 Triple SJ300, 5000# working pressure, Detroit diesel 8V71 (360 hp) engine, Allison 750 transmission, Carrier style twin steer/tandem drive
Rig Tank: 225 bbl, skidded, trough, degasser, line pipe 5000# working pressure
Tool Truck Carrier: Carrier style single steer/tandem drive, Detroit 8V71 (360 hp) diesel engine, Allison 750 transmission
Crew Accumulator Generator Trailer: 30’ mobile, Class 3 Accumulator, 65 kw generator, head, change room
Also includes:
Equipped With Installed Lighting Throughout Derrick For Night Time Operations
Engineered Freestanding - No Anchors Required
2-Self Retracting Lifelines
Standpipe Rated For 5,000#
Escape Line, Escape Buggy With Monkeyboard Rear Egress
Annular API 16A 7 1/16", 5,000# Working Pressure
Double Gate API 16A (Pipe Rams, Blind Rams) 7 1/16", 5,000# Working Pressure
60 Gal 3 Station Accumulator With Electric Pump And Nitrogen Backup
Remote 3 Station Actuator
Fire Rated BOP Hoses
2 7/8" TIW Valve
Hydraulic Bag Type Rod BOP
Slips : Air Actuated, 100ton - 2 3/8" - 3 1/2"
Stripping Rubber Housing
Tongs:58-93
Air Actuated Backups
Hydraulic Lift Cylinder
Accepts 2 3/8" - 3 1/2" Dies
Tubing Elevators: API Spec 8A/8C 2 3/8" 100 Ton
API Spec 8A/8C 2 7/8" 100 Ton
Sucker Rods: 4-API Spec 8A/8C Rod Elevator 37.5 Ton
API Spec 8A/8C 37.5 Ton Rod Hook
3/4" - 1" Elevator Inserts
2-3/4" 7/8" Rod Wrenchs
2-1" Rod Wrenchs
Traveling Blocks: 100 ton API 8C 1" Drill Line Sheves
Bale Links: API 8C 72", 150 ton
Saverhead:Double Rubber
Lubricator:3" X 25'
Sinker Bars:2- 10'
Mandrels: Knucle, Top And Lower Mandrel 2 3/8", 2 7/8", 3 1/2"
Centrfuge
Complete With All Hand Tools
400' = 2" X 5,000# Line Pipe
2" X 5,000# Chicksans
2" X 5,000# Kelly Hoses
4" Suction Hoses
Mud Scale
First Aid Kit
Stretcher
4 Fire Extinguishers
Eye Wash Station
Derrick Belt
Clipper Type Drill Line Weight Indicator
2 Self Contained Breathing Apparatus
High Angle Rescue Kit
Spill Kit
PACKAGE PRICE: $1,175,000
SKYTOP BREWSTER RR400 (Ref#13190T) Mounted on 4 axle carrier, single drum drawworks, 8x7 disc assisted brakes, tubing board, Cat3406B engine, Allison 860DB transmission, 100 ton McKissick block, Foster 58-92R tongs, misc hand tools, approx 36' base beam for rig, ready to work, duplex pump Price: $155,000
SKYTOP SERVICE RIG (Ref#970Ta)
72’ x 140,000# hook load telescoping mast, single tubing, double rods, self guyed, 36” x 8” double drum drawworks, Detroit Series 60 engine, Allison 6750 transmission, Level IV in 2005 Price: $490,000 CDN (approx. $390,000 USD)
FRANKS EXPLORER III 1287 (Ref#3987Ta)
Manufactured 1981, cables are off and in boxes Price: $74,500
FRANKS EXPLORER III 1287 (Ref#3987Tb)
Manufactured 1972, needs engine replaced Price: $32,500
FRANKS 1287 DOUBLE/DOUBLE BACK IN WELL SERVICE RIG (Ref#3875R)
Manufactured 1969, double drum, Lebus grooved for 7/8" drill line and 7/16" sandline, weight indicator, hydromatic brake, air clutches and controls, Loadcraft 104' x 250,000# hydraulically raised and scoped mast, mounted on Loadcraft carrier tandem axle front/tri axle rear, 8V71T Detroit diesel engine, radiator, gauges, hydraulic pump, Allison 4460 transmission, hydraulic reservoir, water tank, air receiver tank, fuel tanks, 4 hydraulic leveling jacks, Hercules 118 deadline anchor, hydraulic winch, McKissick 83A 100 ton block, (2) 36" and (2) 72" elevator links Price: $125,000
FRANKS 1287-160-DTD-HT D/D WELL SERVICE UNIT (Ref#1683Rj)
Detroit 8V-71N Diesel Eng, Allison CBT-4460-1 Trans. Service King 96' x 180,000# Hydraulically Raised & Scoped W/5-Sheave Crown, Dbl Tubing & Triple Rod Boards. Mtd On Franks 4-Axle Carrier W/Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Floatation Front Tires Price: $350,000
FRANKS WELL SERVICE RIG (Ref#5649T)
Built 1966, Double drum 1058 drawworks, 8500’ sandline, blocks, 96’ x 150,000# derrick, mounted on 4 axle carrier, Detroit 6V92T replaced August 2019, PTO, power steering and alternator/generator needs modifications to work with new Turbo diesel engine
Price rig only: $72,500
Price fully tooled: $112,500
FRANKS 1058 WELL SERVICE RIG (Ref#2763T)
Refurbished 2017, 4 lines, 96’ x 205,000# mast, 8V71 Detroit engine, mounted on CCC, 75 ton McKissick blocks, tubing board, rod basket, work platform, rigged up and working in field, fully tooled (everything needed) all brand new tubing tongs, rod tongs, tubing elevators, rod elevators and slips. Rig has 475’ of new 7/8” drill line and a new scope cylinder. Price: $325,000
FRANKS 1058 (Ref#121R)
38x10 drawworks, 4 axle Crane Carrier, 6V92 Detroit diesel engine, 4460 Allison tranmission, 96' x 133,000# mast with 4 lines, no block, no sandline, no rod board, no monkey board, needs a little work Price: $94,500
FRANKS EXPLORER (Ref#13106R)
Manufactured 1968, completely rebuilt 2011, workover rig, PTO, mounted on CCC with 6V71 Detroit engine, doghouse PRICE: $97,500
Tooling available at extra cost
FRANKS 658 WELL SERVICE RIG (Ref#14893T)
Double drum drawworks with hydromatic brake, 10" brakes, 96' x 180,000# derrick, mounted on 4-axle PEMCO carrier with hydraulic support legs, 8V71 Detroit, 4460 Allison transmission, Spicer 784 split shaft gearbox, 250 hp right angle drive, 650' of 7/8" tubing line, 8000' of 9/16" swab line, 100 ton Sowa block, hydraulic winch Price on Request
FRANKS 658 D/D WELL SERVICE UNIT (Ref#1683Rh)
CAT 3406 Diesel Eng, ALLISON HT-750 Trans., 96'H 180,000# Telescoping Mast, Hydraulically Raised & Scoped W/4-Sheave Crown, Dbl Tubing & Triple Rod Boards, Adjustable Height Work Platform. Mtd On FRANKS "Cruiser" 4-Axle Carrier W/NEW Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Flotation Front Tires Price: $300,000
FRANKS 658 SERVICE RIG (Ref#3070N)
Manufactured 1974, double drum drawworks, double triple 96' x 180,000# derrick with a hydromatic. The rig has working line with heavy traveling block and approx. 12,000' 9/16 sand line. Mounted on Skytop carrier with tandem steering and rear ends 4 axles W/ tag axle, 4 leveling jacks, powered by an 8V-71 with a Allison 4460 transmission, (note transmission was overhauled in early 2000's) and the engine has a new head on right bank. The rig has two leveling jacks on the rear and two leveling jacks on the front which are located right behind the steering axels. Tooled out with hydraulic rod and hydraulic tubing tongs, air slips, rod and tubing elevators, hand tools and misc over items. PRICE REDUCED: $115,000
WICHTEX C65 DOUBLE POLE WORKOVER RIG (Ref#4371T)
Double drum, mounted on 1980 Ford with 290 Cummins, DT 466 deck engine, 6 speed, double 7” x 5-1/2” poles, 7/8” drill line, tong rack, rear hydraulic jacks, air/friction clutch Price: $32,000
WILSON WORKOVER RIG (Ref#5989T)
Double drum, 70' pole, 4000' of new line, new power tongs, mud pump, power swivel, new 8.3L Cummins deck engine, mounted on 1979 Mack superliner with 400 Cummins engine, 13 sp transmission, completely tooled, 10 new bits, 4 drill collars, ready to work Price: $170,000
COOPER D15 AC SERVICE RIG (Ref#12785Ta)
Built 1968, single drum pulling rig, mounted on 1991 GMC Topkick, Cat engine Price: $36,500
FRANKS 33 WELL SERVICE RIG (Ref#738T)
10 x 13 pole, double Drum, Franks 33” air over grease, brakes in good shape, 7/8” tubing line, tubing blocks, tong pressure adjustment, hi/low on tubing, air slips control, master kill on drawworks, Foster 36 with 8’ lift ram, air backup, swing around tong rack, mounted on 2001 Freightliner F80 truck, Cat C12 Series 3125, Fuller 9-speed transmission, PTO, winch for pole scope Tulsa 48, blocks raise pole, dual fuel tank, dual battery, 50 gal hyd tank, toolboxes, hydraulic outriggers, BJ rod tongs, ¾” and 7/8” heads, tools, swabs, extra tongs, orbits, drilling head Price: $242,500
FRANKS 44 POLE RIG (Ref#4018T)
Double drum, 10” x 13” 65’ pole, 80,000#, mounted on 1979 IHC Transtar F4370 truck Price: $152,500
FRANKS SINGLE POLE RIG (Ref#14001T)
Built 1966, Double drum 1058 drawworks, sandline has 5/8” line, 75 ton blocks on tubing drum, 10 x 13 single pole, 6V471 Detroit engine, standard transmission, 3 axle carrier, good tires, misc parts and accessories including chains, seals, old style oiler, sitting since 2016, running when parked, includes spare parts. Price: $47,500
BJ tongs available at extra cost
FRANKS 44 (Ref#11650T)
Double drum (second drum is removed, rig is running as single drum), hyd pole and down riggers, mounted on 1990 Crane Carrier, 9 sp Eaton Fuller transmission, 100,000 miles, 8 x 10 telescoping poles, 3/4” cable, no tooling Price: $52,500
FRANKS 844 (Ref#11696Tb)
10 x 13” pole, single drum, mounted on 1980 Brigadier 9500 Series truck with 671 inline Detroit, drop box, travelling blocks, tubing lines, hyd jacks, no tooling, sitting since 2000 PRICE: $49,500
FRANKS WORKOVER RIG (Ref#7682T)
Triple drum, 8-5/8 x 7” pole, telescopes to 44’, sand pump, bailer, mechanical clutch, mounted on Ford tandem axle truck with diesel engine, truck runs but not recommended to drive long distance Price: $27,500
WALKER NEER C34 (Ref#8263Ta) 7 x 8 Double Poles, Waukesha 145 on deck, mounted on 1978 Mack with Cummins diesel, screw jacks, includes Doghouse and (1) sting of 4" tools, sitting 1 year Price: $65,500 - Kansas
WALKER NEER C32 (Ref#8263Tb) Waukesha 135 on deck, chain driven, 5 x 7 double poles, 3 lines, screw jacks, mounted on 1964 tandem axle International truck with V8 gas engine Price: $34,500 – Kansas
Also available: WALKER NEER C32, 5 x 7 double poles, poles bent, has another 7 x 8 pole to include, no motor on deck, mounted on 1981 Mack truck (truck needs replacing) - Price: $14,500 - Kansas
WALKER NEER C31 (Ref#8263Tc)
Single pole, 3 lines, Waukesha deck engine locked up engine needs replacing or rebuilding, mounted on 1972 Chevy 2-ton truck, screw jacks been sitting for years Price: $25,500 - Kansas
WALKER NEER C33A (Ref#14459T)
400’ of 7/8” block line, 9/16” sandline drum (no cable), 2000’ of ¾” drilling drum, 3 McKissick sheaves, air clutches and controls, mounted on 1961 Mack truck with 250 hp Cummins engine, older rig but runs good. Includes elevators, oil saver pump, no BJ tongs, currently working. Price: $87,500 - Pennsylvania
WALKER NEER 28 (Ref#10087T)
Double pole rig, 6000’ bailer line, block line, no drill line, mounted on tandem axle trailer, 2 leveling jacks, fuel tank Price: $44,500
SHOP BUILT CABLE TOOL/SWAB RIG (Ref#10188)
Triple drum, friction clutch, cathead (sandline holds 2400’ of 5/8” line), mounted on tandem axle Chevy truck with 427 gasoline engine, 8-5/8” x 45’ single pole, new tires, power steering, wireline unit, good usable rig for shallow oil/gas lease, drills, workover, swab capabilities, no tools Price: $112,500 - Oklahoma
WAGNER MOREHOUSE WELL SERVICE RIG (Ref#7837T)
350 GM deck engine, mounted on 1986 GMCtruck, 454 GM engine, sandline, approx 50' pole, no cathead, can pull single, ready to work, tooled PRICE: $19,500
WORKOVER RIGS / MUD PUMPS PACKAGE FOR SALE (Ref#4391T)
2004 Taylor workover rig, 104’ mast
1979 Franks workover rig, 102’ mast
Gardner Denver PA8 mud pump with Detroit 8V engine (rebuilt)
Gardner Denver PA 8 mud pump with Detroit 60 Series
2019 Service King hydraulic cat walk
Price on Request