SUN MACHINERY CORP.
Call: 516-536-7375 / 516-536-7317 fax
Ingersoll Rand
TH75(W)(E), TH60 (Bucyrus Erie 22W,36), TH55, TH50, T5(DH)(BH), T4(LD)(W)(BH), T3W, T2W, RD10, RD20, TRUCM3, 1500
INGERSOLL RAND TH100
(Ref#6604N) Manufactured 1973,
extensive rebuild 2007 (used for 4 wells), mast 7 floor to ground, 90,000#
pullback, long mast runs range 3, Detroit 8V72 on deck, mounted on Crane Carrier
with Detroit 8V71 engine. loading arm, doghouse and water tank, Emsco D300 14 x
7-1/4 duplex mud pump, rig operated hydraulic pipe trailer with 3100 of 3-1/2
drill pipe, collars, mud tank with BOP manifold cabinet, linear shaker, frac
tank, 24 van with 150 kw John Deere light plant, 60 gallon accumulator, 7-1/16
BOP stack, flare lines and tank. Price: $500,000 REDUCED
TO: $325,000
INGERSOLL RAND TH100 (Ref#7353R) Manufactured 1972, 30,000# pullback, good running condition, last drilled October 2011, 530 CFM / 100 PSI Leroi compressor, 4 x 3 x 13 Wilson Mogul Centrifugal mud pump (late model), mounted on 6 x 6 Champion truck powered by Cummins 250hp diesel engine & PTO for rig, drill pipe carousel, 380 of 3 ½ x 20 drill pipe, Myers water pump. PRICE: $62,500
INGERSOLL RAND TH75W (Ref#5049N) Manufactured 1991, 900/350 air compressor (rebuitl a few years ago (approx 1000 hrs), Cummins KTA19 (525 hp) deck engine, 50,000# pullback, mounted on Paystar 5000 3-axle truck, 20 gpm Cat water injection, good condition Price: $210,000
Also available:
500 of 4-1/2 x 20 drill pipe with 3-1/2 Reg API conn drill pipe
SD8 hammer, new 10 Mitsubishi under reamer, (2) 6 QL hammers, 6 under reamer, 10 hole opener
1500 gallon tank on 1978 White truck
Package price: $230,000
INGERSOLL RAND TH75W (Ref#9634Nb) 900/350 air compressor, 3 x 4 centrifugal mud pump, 50,000# pullback, rebuilt King swivel, rebuilt Cat water injection, line oiler, Cummins KT19 engine, Cat injection pump, oiler, mounted on Paystar 5000 with diesel engine, ready to work, currently drilling Price: $255,000 Pipe available at additional cost
ATLAS COPCO TH60 (Ref#1393N) Manufactured 2007, less than 3000 hours, mounted on Peterbilt with Cummins engine, 1070/350 air compressor, 3x4 on board mud pump, water injection, line oiler, single pipe loader, 7 rod carousel, 18000# winch, 40000# pullback, 2 speed tophead, sandline reel, 200 pipe (set up for 3 ½) excellent condition Price: $470,000
ATLAS COPCO TH60 (Ref#10880N) Manufactured 2006, 2900 hours, 950/350 air compressor (765 hours), mounted on Peterbilt truck with 565 hp Cummins engine, 3 x 4 Mission mud pump, 18 gpm Bean water injection, 32mast, 32,000# pullback, 3-1/2 carousel, line oiler, 18,000# winch, excellent condition Price: $520,000
INGERSOLL RAND TH60
(Ref#5554N) Manufactured 2003,
900/350 IR HR2 air comressor (4069 hrs), 38 tower, mounted on International
Paystar 5600i with Cat C15 (525 hp) engine, Fuller 13 speed transmission, diesel
fired pre-heater, drill engine 7063 hours, 7 rod carousel, uses 4-1/2 x 20
drill rod, 15 rod box, 18 gpm Bean water and foam pump, 7 gpm electric hammer
oiler, 18,000# winch, 6 hammer holder Price: $420,000
PRICE REDUCED: $370,000
INGERSOLL RAND TH60 (Ref#8698N) Manufactured 2001, 825/350 air compressor, 26,500# pullback, 2-speed rotary tophead, 19 gpm water injection, 18,000# winch, 3 x 4 Mission mud pump, mounted on International Paystar with Cat C15 (475 hp) engine, 400-600 of 4-1/2 drill pipe, excellent condition Price: $365,000
INGERSOLL RAND TH60
(Ref#846Nb) Manufactured 2001,
mounted on International 5600 6x4 with Cat C16 engine, 1050/350 air compressor,
25 gpm water injection, Mission magnum 3x4 mud pump, 30000# pullback, 18000#
hoist Price: $265,000 OFF MARKET
INGERSOLL RAND TH60
(Ref#2898Na) Manufactured 2000, PTO,
2 speed tophead, mounted on International Paystar 5000 with Cat 3406 engine,
6,750 original miles on truck, 11,500 hours on engine, 825/350 air compressor
(2,500 hours), mostly used for mud drilling, Mission 3x4 centrifugal mud pump,
Cat 25gpm water injection, hammer oiler, 6 rod carousel, 30000# pullback, 38
mast, 18000# hoist line, 3000# sandline with 880 of 3/8 cable, set up for 4 ½
pipe, 300 of 4-1/2 X 20 drill pipe Price: $280,000 PRICE
REDUCED: $265,000
INGERSOLL RAND TH60 (Ref#7336N) Manufactured 2000, PTO, mounted on International with Cat C16 600hp engine, 1070/350 air compressor, no mud, standard mast & pullback, water injection, rod box, carousel available but not currently on rig, 4 hydraulic leveling jacks Price: $265,000
Atlas 2000 casing hammer & 4 ½ x 20 drill pipe available at extra cost
INGERSOLL RAND TH60 (Ref#5635Na) Manufactured 1999, rig has 11,615 hours, rebuilt 825/350 air compressor Model SR2 with 3 hours, mounted on International 5000 6x4 truck (15,669 miles), with Cat 3406E diesel engine, 25 gpm water injection, line oiler, 3 x 4 Mission Magnum mud pump (250 pis), 30,000# pullback, 18,000# hoist capacity, 2,000# winch capacity Price: $230,000
Also has an Ingersoll Rand TH60 Manufactured 2001 - $250,000
INGERSOLL RAND TH60 (Ref#846Na) Manufactured 1999, mounted on International 6x4 with Cat 3406E engine, 825/350 rebuilt air compressor, 3x4 Mission magnum mud pump, 25 gpm water injection, line oiler, 18000# hoist, 30000# pullback Price: $240,000
INGERSOLL RAND TH60
(Ref#1327N)
Manufactured 1999, 750/350 air compressor, 5 x 6 mud pump, mounted on 1998
International with 435hp engine in truck, 2 speed top head, set for 4-1/2 rod,
Atlas casing hammer, 600 sandreel, 16,000# hoistline, 30,000# pullback, no
pipe Price: $330,000 OFF
MARKET
INGERSOLL RAND TH60
(Ref#8696N)
Manufactured 1996, 420 hours, 750/350 IR HR2 air compressor, 4 x 3 x 13
centrifugal hydraulicallyoperated mud pump, 38 hydraulically raised mast, drill
pipe carousel, rod box, set for 3-1/2 drill pipe, 16,000# sandreel ASM with
clutch, 7 gpm hammer oiler, 25 gpm water injection system with 500 gallon water
tank, mounted on International Paystar with 425 hp Cummins diesel engine, PTO, 4
hydraulic leveling jacks, 2 speed top head, breakout wrench, jib boom, hoisting
jib boom, 2.5 air piping, 2.88 spindle sub
Price:
$375,000 OFF MARKET
INGERSOLL RAND TH60 (Ref#6203Na) Manufactured 1995, mounted on International Paystar 5000 with Cummins N14 engine, 750/300 HR2 air compressor, 32 mast, 30000# pullback, 7 rod carousel, 16000# Gearmatic hoist, Bean 8gpm water injection, 7 gallon electric DHD lubricator, 3x4 centrifugal mud pump
Price: $230,000
4 ½ x 20 pipe- available at extra cost
1990 FORD L8000 WATER TRUCK (Ref#6203NB) 1600 gallon poly tank, diesel engine, grouter, aux fuel tank, toolboxes, no crane or welder
Price: $26,000
INGERSOLL RAND TH60 (REF#5323R) Manufactured 1994, sandline, 750 / 350 compressor, mounted on International tandem axle truck with diesel engine and PTO drive, 10gpm Bean injection pump, hammer oiler, 1000 of 4 ½ IF drill pipe, 1000 of 3 ½ IF drill pipe, 200 of 20 collars. PRICE: $270,000
INGERSOLL RAND TH60
(Ref#2154N)
Manufactured 1994, 750/350 air compressor, 3 x 4 Mission mud pump, 36 mast,
mounted on International Paystar 5000 with Cummins N14 engine, PTO, Bean water
injection, line oiler, 8 rod carousel, rod rack, 4 hyd leveling jacks, good
condition Price: $350,000 REDUCED TO $275,000
INGERSOLL RAND TH60 (Ref#2989Nb) Manufactured 1994, 750/250 air compressor, mounted on International Paystar with Cummins diesel engine (motor needs overhaul), PTO driven, 5 x 6 mud pump, 18 gpm water injection, 7 rod carousel, standard mast and pullback, breakout wrench, Price: $180,000
INGERSOLL RAND TH60 (Ref#8346N) Manufactured 1992, approx 9,500 hours, 750/300 IR air compressor, 38 tower, 29,500# pullback, mounted on Paystar 5000 truck with Cummins N14 (410 hp) diesel engine, PTO, 13 speed Fuller transmission, Centerline 7-1/2 x 10 duplex mud pump (300 gpm/350 psi), 7 rod carousel, rod box, Cat 25 gpm water injection pump, 7 gpm electric lubricator, 16,000# winch, 2000# aux winch, grout pump. Needs approx $30,000 in repairs: tower channels need to be straightened, mud pump is seized and needs full service Price as is: $150,000
INGERSOLL RAND TH60 (Ref#6676Na) Manufactured 1989, 825/350 air compressor, 3 x 4 Mission Magnum mud pump, mounted on tandem axle 1989 HME (Henrickson) truck 8V91 Detroit diesel engine, new 13 speed Roadranger transmission, set up for 4-1/2 pipe Price: $195,000
2001 INTERNATIONAL WATER TRUCK (Ref#6676Nb) 1400 gallon tank, single axle, flat bed Price: $30,000
INGERSOLL RAND TH60 (Ref#2093N) Manufactured 1989, 850/350 air compressor, Atlas 4000 casing hammer, mounted on Paystar 5000 truck with 8V92 Detroit dieselengine, PTO, standard ullback, long mast, Cat 25 gpm water injection, sandline, 7 rod carousel, no pipe Price: $325,000
INGERSOLL RAND TH60 (Ref#849N) Manufactured 1989, 750/350 air compressor, mounted on GME truck, 38 mast, 6 rod carousel, replaced gearbox, mast and hydraulic pumps 700 hours ago, casing hammer, hammers, 760 of pipe, excellent condition.
1998 FORD LOUISVILLE WATER TRUCK, 1500 galon Flatwater Fleet tank, 200 gallon aux fuel tank, welder, torches, great condtion
Package Price:
$380,000 PRICE REDUCED:
$310,000
INGERSOLL RAND TH60 (Ref#2848Ng) mounted on 1989 HME, 825/350 air compressor, 3 x 4 centrifugal mud pump, set up for casing hammer Price: $170,000
Casing hammer available at additional cost
INGERSOLL RAND CYCLONE TH60 (Ref#7831Na) Manufactured 1988, mounted on GMC General with 8V92TA Silver Detroit diesel engine, Jake Brakes, 13 speed RR trans, IR HR2 825/350 air compressor, 38 extended derrick, line oiler, 4 motor retractable top head drive and table, 8 gpm water injection, 200 gallon water tank, Wellen 915 drill through casing hammer w/ hydraulic casing hammer lift package and hydraulic swing our, 9 rod carousel, arc welder, 16000# hydraulic sandline, 4 hydraulic leveling jacks, 560 of 3 ½ drill pipe Price: $155,000
INGERSOLL RAND TH60 (Ref#11244) Manufactured 1983, 750/250 air compressor, mounted on 1981 International 5070 (new trans 2002) with 8V92TA Detroit engine (rebuilt 2000), 34 derrick, 7 rod carousel, 400 of 4-1/2 drill pipe, rotary head rebuilt 2002, new cables, gauges, swivel, 8 gpm water injection pump, good condition Off market
INGERSOLL RAND TH60 (Ref#8086N) Manufactured 1981, 750/250 air compressor, 3 x 4 Mission Magnum mud upmp, standard mast and pullback, mounted on GMC truck with Detroit 8V92 engine, PTO, 3 leveling jacks, 7 rod carousel, 500 of 20 joints pipe, 2-7/8 and 3-1/2 IF tool joints on pipe Price: $120,000
Available at extra cost:
Shaker pit, trailer mounted with 3000 gallon tank, 4 desander cones, Perkins 4 cylinder engine $35,000
INGERSOLL RAND TH60 (Ref#6349N) Manufactured 1981, PTO, mounted on 1981 Kenworth C565 with Cat 3408 engine, 32 mast, 5 x 6 mud pump, Leroi 450/250 air compressor, water injection, 6 rod carousel, oil injection pump, 1 front & 2 rear hydraulic leveling jacks, no tools, 500 of 3 ½ drill pipe, includes spare Leroi 450/250 rebuilt compressor Price: $195,000
INGERSOLL RAND TH60 (Ref#4061N) Manufactured 1980, PTO, mounted on 1980 International with Detroit 8V92 475hp engine, 750/250 air compressor, Mission centrifugal mud pump, mainline & sandline winches, 38 mast, Bean water injection, hammer oiler, 7 rod carousel, rod box, 4 hydraulic leveling jacks, 6 downhole hammer, concentric bit, 520 of 4 ½ x 20 drill pipe, currently drilling, ready to go Price: $120,000
INGERSOLL RAND TH60
(Ref#2248N) Manufactured 1980,
750/250 air compressor, mounted on International Paystar truck with 8V92 Detroit
diesel engine, PTO, 28,000# winch, standard mast and pullback, 16 gpm Bean water
injection, breakout wrench, good running condition Price:
$115,000 PRICE REDUCED: $100,000
Pipe available at extra cost
INGERSOLL RAND TH60
(Ref#7229N) Manufactured 1979,
mounted on 79 International Paystar with Detroit engine, 750/250 air
compressor, rebuilt 5 x 6 Gardner Denver mud pump, new swivel & slider box, 1
main winch, 7 rod carousel, rod box, 1000 of 4 ½ x 20 drill pipe, new 8
hammer, 6 hammer, bits, subs etc, no stabilizer, ready to go Price:
$140,000 PRICE REDUCED: $120,000
INGERSOLL RAND TH60 (Ref#6270Nb) Manufactured 1979, mounted on 1979 International Paystar with diesel engine, 750/250 air compressor (inoperable), carousel, water injection, 35 mast, 30000# pullback, 8 rod carousel, pipe rack, rebuilt transfer case, new air clutches, new hoses, no pipe available PRICE: $65,000
INGERSOLL RAND TH60 (Ref#13712N) Manufactured 1979, 750/250 air compressor, 6 casing hammer, mounted on 1979 International truck, 8V92 Detroit diesel deck engine, 15 gpm Cat water injection pump, pipe spinner, 960 of pipe, extended tower Price: $85,000
INGERSOLL RAND TH60 (Ref#7264N) Manufactured 1979, 600/250 air compressor, extended derrick, mounted on 1978 Kenworth truck with 400 Cummins Turbo engine, PTO, carousel removed, 500 of drill pipe Price: $90,000
INGERSOLL RAND TH60 (Ref#4855N) Manufactured 1979, 600/250 air compressor, new 3 x 4 mud pump, 9 rod carousel, hammer oiler, 12 gpm water injection pump, 18,000# winch, standard pullback, mounted on 1979 Paystar 5000 truck, 3 leveling jacks, new pulldown cylinder, air compressor clutch rebuilt, transmission in truck rebuilt, new tires, new rotation motors Price: $110,000
INGERSOLL RAND TH60 (Ref#14229) Manufactured 1979, mounted on 1979 International Paystar 5000 with Detroit 8V92T engine, 750/250 air compressor, cotter box, 38 mast, 5 6 & 8 hammers Price: $160,000
INGERSOLL RAND TH60 (Ref#6653N) Manufactured 1978, 750/250 air compressor, 5 x 6 Gardner Denver mud pump, long mast, sandline, Detroit 8V92 diesel engine, 9 rod carousel, mounted on 1978 International Paystar 5000, (9) joints 180 of 3-1/2 x 20 drill pipe Price: $120,000
INGERSOLL RAND TH60
(Ref#3306N) Manufactured 1978, PTO,
mounted on 1978 International Paystar 5000 with overhauled Detroit 8V92 engine,
750/250 air compressor, 3x4 centrifugal mud pump, water injection, standard mast
& pullback, rod box, 7 rod carousel, line oiler, 360 of 4 x 20 drill pipe,
all tools Price: $110,000 PRICE REDUCED: $110,000
INGERSOLL RAND TH60
(Ref#10433) Manufactured 1978,
600/250 IR air compressor, mounted on International Paystar with 8V71 Detroit
diesel engine, 16,000# sandline winch, 30,000# pullback, carousel, pipe box, 8
gpm water injection pump, hammer oiler. 5-1/2 x 10 Gardner Denver duplex mud
pump with453 Detroit diesel engine mounted on trailer, 740 of 4-1/2 x 20
drill pipe, 440 of 2-7/8 drill pipe, hammers, bits, subs, handling tools,
drilling everyday Price: $155,000 OFF MARKET
INGERSOLL RAND TH60
(Ref#5026) Manufactured 1978,
750/250 air compressor (rebuilt with 100 hours), 38 tower, hammer oiler,
Mounted on International tandem axle truck, powered by Detroit diesel, 8 gpm
water injection pump, Wellen 915 casing hammer Price:
$160,000 PRICE REDUCED: $120,000
INGERSOLL RAND TH60/CYCLONE 36 (Ref#6706N) Manufactured 1978, mounted on International Paystar 5000 with Detroit 8V71 diesel engine, Leroi 450/250 air compressor, 3x4 Sandmaster mud pump, bailer line, hoist line, water injection, line oiler, no carousel, rod rack, 4 hammer Price: $65,000
400 of 3 ½ x 20 (2-3/8 IF) pipe available at extra cost
INGERSOLL RAND TH60 (Ref#8000Ra) Manufactured 1978, LeRoi air compressor, 4 x 3 mud pump, 4 motor top head, 9 rod carousel, sandreel, main line winch, mounted on 1977 International Paystar 5000 F5070 truck, motor rebuilt February 2011 (0 hours), new paint, rig reconditioned and ready to drill Price: $130,000
INGERSOLL RAND TH60
(Ref#5771N) Manufactured 1977,
650/250 air compressor, 8V71 Detroit diesel engine (engine rebuilt 2008, very
little use since), mounted on Paystar 5000 truck, 8V71 Detroit diesel engine,
PTO, 3 x 4 Mission mud pump, 11 gpm water injection pump, 7 rod carousel with
liners for 4-1/2 pipe, sandline (needs work), rod rack, approx 140 of 3-1/2 x
20 drill pipe, engine rebuilt 1-1/2 years ago, running condition Price:
$110,000 PRICE REDUCED: $95,000
INGERSOLL RAND CYCLONE TH60 (Ref#7831Nb) Manufactured 1977, mounted on International Paystar 5070 with 8V71T Silver Detroit diesel engine, Jake brakes, 13 speed RR trans, IR 600/250 air compressor, 33 derrick, 8 gpm water injection, line oiler, 4 motor retractable top head drive and table, 200 gallon water tank, Hawk 66 drill through casing hammer w/ hydraulic casing hammer lift package and hydraulic swing out, 9 rod carousel, hydraulic DC arc welder, 12000# hydraulic sandline, 3 hydraulic leveling jacks, 400 of 3 ½ drill pipe Price: $110,000 Canadian
INGERSOLL RAND CYCLONETH60 (Ref#7831Nc) Manufactured 1977, mounted on Kenworth LW924 with 400 Cummins engine, Jake brakes, 13 speed RR trans, Leroi 450/250 air compressor, 33 derrick, 8 gpm water injection, line oiler, 200 gallon water tank, Wellen 915 casing hammer w/ hydraulic casing hammer lift package and hydraulic swing out, 7 rod carousel, hydraulic DC arc welder, 12000# hydraulic sandline, 3 hydraulic leveling jacks, 800 of 4 drill pipe Price: $65,000 Canadian
INGERSOLL RAND TH60 (Ref#12598N) Manufactured 1977, 750/250 IR air compressor, mounted on 1977 International Paystar 5000 truck, Detroit 8V92 diesel engine, good working condition, located Africa Price: $110,000
INGERSOLL RAND TH60 (Ref#12231N) Manufactured 1977, 600/250 air compressor, 3 x 4 centrifugal mud pump, mounted on International Paystar 5000 truck with Detroit diesel engine, oil and water injection, 2 hammers, 2 stabilizers, bits, subs, etc., mud mixing pit, 400 of 3-1/2 x 20 drill pipe, good condition Price: $105,000
INGERSOLL RAND TH60 (Ref#9290N) Manufactured 1976, PTO, mounted on 1976 Ford L9000 with Detroit 8V71 engine, Leroi 450/250 air compressor, no mud pump, Bean water injection, standard mast & pullback, 1 front & 2 rear hydraulic leveling jacks, 500 of 3 ½ x 20 drill pipe, 5, 6, 8 hammers, bits, subs, stabilizer, etc Price on request
INGERSOLL RAND TH60 (Ref#2260N) 500/250 LeRoi air compressor, Mission 4 x 3 Centrifugal pump, mounted on 1976 Paystar 5000 truck with 318 Detroit engine, PTO, standard mast, 3 hydraulic leveling jacks, 9 rod carousel, 340 of 3-1/2 IF x 20 drill pipe, stabilizer, grout pump, water injection, 2 hammers, tools Price: $110,000
1993 International Paystar 2000 Gallon Water Truck (Ref#2260Nb) 2000 gal plastic oval tank, Cumins engine, new tires, pipe racks, 23,000 miles Price: $50,000
INGERSOLL RAND TH60 (Ref#3994Na) Manufactured 1975, 600/250 LeRoi air compressor, 5 x 6 mud pump, 36 mast, mounted on 1975 Paystar 5000 truck with 8V71 Detroit engine, 7 rod carousel, breakout wrench, water injection, subs, bits, stabilizer, etc., 4 hydraulic jacks, fully refurbished, all new hydraulics, ready to go, stored inside
1984 INTERNATIONAL WATER TRUCK (Ref#3994Nb) DT466 engine, 10 speed transmission, grout pump, 2000 gal round steel tank, no crane or welder, aux fuel, toolbox, pie rack
Package Price: $150,000
INGERSOLL RAND TH60 (Ref#8138N) Manufactured 1974, LeRoi 100SDS air compressor, Mounted on Champion carrier all wheel drive w/ Cummins 300hp diesel engine, 3 hydraulic leveling jacks, 7 rod Carousel for 4-1/2" drill pipe, Pipe rack, 16,000# single line winch, 8GPM water injection pump, Breakout wrench, Drill pipe: 4-1/2" x 20', Running condition Price: $45,000
INGERSOLL RAND TH60 (Ref#14323) Manufactured 1974, 256 SDS Air compressor, 915 Welco casing hammer with swing boom, long tower with lights, mounted on 1980 International truck w/new Detroit 6V92T engine, cotter box rebuilt, custom foldown walkways all around, 300 gpm Bowie pump, new valve bank, Bean water injection, foam injection, 3 hydraulic leveling jacks, sandline with free fall, extra parts for rig and parts compressor, good condition, drills daily Price: $110,000
INGERSOLL RAND TH60 (Ref#9121N) Manufactured 1974, 450/125 air compressor, PTO, mounted on 74 Dodge with Cummins 230 hp engine, air compressor, 2 x 4 mud pump, 7 rod carousel, standard mast & pullback, water injection, mainline, sandline, rod rack, 1 front & 2 rear hydraulic leveling jacks, 260 of 4 ½ x 20 drill pipe, all tools, sitting but running when parked Price: $55,000
CYCLONE 36/TH60 (Ref#4246Na) Manufactured 1974, PTO, mounted on 1974 Ford L8000 6x4 with Cat 1160 diesel engine, 5x6 piston mud pump, Leroi 50SDS air compressor, hydraulic powered retractable tophead drive, rod box, line oiler, water injection pump, mud pan, conductor pipe, 1 front & 2 rear hydraulic leveling jacks, 315 of 3 OD x 15 drill pipe 2 3/8 IF Price: $75,000
INGERSOLL RAND TH60/CYCLONE 36 COMBO RIG (Ref#3110N) mounted on 1973 Ford F8000 truck, Cat diesel engine, 5 x 6 mud pump, 50 SDS air compressor, PTO, no carousel, rod rack, water injection, 300 drill pipe, good condition, one owner machine, stored inside Price: $60,000
INGERSOLL RAND TH60/CYCLONE 36
(Ref#15015) Manufactured 1973,
developmental air compressor, 3 x 4 mud pump, mounted on Paystar 5000 6x6 truck
with Cat 3208T engine, air brakes, 13 speed transmission, breakout wrench, water
injection, excellent condition, currently drilling, new hydrostatic, new swivel,
new tophead, 3 leveling jacks, 250 of 3-1/2 x 20 drill pipe Price:
$80,000 OFF MARKET
CYCLONE 36 / TH60 TOPHEAD/ROTARY COMBINATION (Ref#6695N) Manufactured 1973, 2 deck engines: Ford 4 cyl diesel, Detroit 6V71 diesel, mounted on 1990 International Paystar w/350 Cummins engine, 600/100 LeRoi air compressor, 8 gpm water injection, breakout wrench, 3 hyd leveling jacks, stabilizer, 400 of 4-1/2 x 20 drill pipe (2-7/8 IF conn), good condition, currently drilling Price: $65,000
CYCLONE 36/TH60 (Ref#4246Nb) Manufactured 1970, PTO, mounted on Champion 6x6, 5x6 piston mud pump, Leroi 50SDS air compressor, main winch, drillers stand, rod box, 1 front & 2 rear hydraulic leveling jacks, no tools Price: $75,000
INGERSOLL RAND TH60 / CYCLONE 36 CABLE RIG COMBO (Ref#9325) Rotary/spudder, Manufactured 1969, 6 cyl compressor, Gardner Denver 5 x 6 mud pump, mounted on 1969 Dodge tandem axle truck with gasoline engine, Ford diesel on mud pump and air compressor, Ford gasoline on rig, 5 pullback cylinder, drilled 500 with 3 rod, 4 cable tool stem 15, 100 rods, 15 stabilizer, 400-500 cable on bailer, Price: $30,000
INGERSOLL RAND TH60 (Ref#4884N) Manufactured 1972, Grimmer Schmidt Model 785-82 air compressor 525 cfm/250 psi, mounted on 1974 Ford 9000 LTS truck with diesel engine, 3 hydraulic leveling jacks, 32 hydraulically raised mast, Geometric hydraulic hoist drum, 7 rod carousel, rod box, 240 of 4-1/2 x 20 drill pipe, PTO, water injection pump, air operated breakout wrench, hydraulic operated wrench, 6 hammer, 6 hammer bit Price: $55,000
INGERSOLL RAND TH60 (Ref#10814) Manufactured 1972, 450/250 Model 256 air compressor, mounted on 1972 Ford 9000 with 8V71 Detroit diesel, 3 jacks, 3 hammers, 400 of 3-1/2 x 20 drill pipe Off market
INGERSOLL RAND TH60 (Ref#1280N) Manufactured 1981, bare rig, blown compressor, no radiator, no top head, standard pullback, 32 mast, Myers water injection pump, 3 leveling jacks, hydraulic winch, 750/250 compressor available (no cooler) Price: $29,500
INGESOLL RAND TH60 MAST (ref#7022Na) 39, new, never used, with tophead and cylinder, flatstock, reinforced for deep wells, Price: $85,000 OR BEST OFFER
New Ό diamond plated steel deck Price: $15,000
CYCLONE 36/TH60 (Ref#5048N) 600/250 on board air compressor, 3 x 4 Mission mud pump, mounted on 1972 Ford L8000 truck with Cat 3208 Turbo engine, PTO, good condition, ready to go, no pipe or tools Price: $145,000
CYCLONE 36/TH60 COMBINATION RIG (Ref#3423N) Manufactured 1978, Gardner Denver 6 storke duplex mud pump, Mission 3 x , mounted on International Paystar 5000 truc,k, new front tires, new (8) rear tires, new King swivel, rebuilt hydraulic motors, 320 of 2/=-7/8 HD pipe, stabilizer, bits Price: $100,000
CYCLONE 36/TH60 (Ref#13621N) 50 SDS LeRoi compressor, 3 x 4 Mission mud pump, mounted on 1972 Dodge 800 truck with 225 hp Cummins engine, PTO, no pipe, good condition Price: $85,000
INGERSOLL RAND TH55 (Ref#6987Na) Manufactured 1991, PTO, mounted on International Paystar 5000 with diesel engine, IR 750/250 air compressor, Gardner Denver 5 x 6 mud pump, Bean 10 gpm water injection, 7 rod carousel, pipe racks, 4 hydraulic leveling jacks, 160 of 4 x 20 drill pipe, Mission 4 6 & 8 hammers, drilling now Price: $220,000
INGERSOLL RAND TH55
(Ref#3036Na) Manufactured 1991,
mounted on 1989 International with 350 Cummins engine, 600/250 air compressor,
3x4 centrifugal mud pump, 9 rod carousel, 8 gpm water injection, pipe rack, 4
hydraulic leveling jacks, 460 of 3 ½ x 20 drill pipe Price:
$170,000 PRICE REDUCED: $145,000
INGERSOLL RAND TH55 (ref#6775N) Manufactured 1990, 650/250 air compressor, 5 x 6 mud pump, 3 x 4 centrifugal pump, Cat engine, PTO, mounted on International Paystar, 7 rod carousel, rod box, 400 of 4-1/2 pipe Price: $185,000
INGERSOLL RAND TH55 (Ref#2928N) Manufactured 1990, has TH60 mast, PTO, mounted on 1990 Kenworth K900 with Cat 425hp engine, only 2000 hours on rebuild, 600/300 air compressor, no mud pump, casing hammer, Bean water injection, 18000# winch, 4 hydraulic leveling jacks, drilling now, 4 ½ x 20 drill pipe Price: $140,000
INGERSOLL RAND TH55 (Ref#8966N) LeRoi SDS air compressor, 5 x 6 Gardner Denver mud pump, extended mast, 27 stroke, mounted on 1979 International Paystar 5000 tandem axle truck with 300 Cummins engine, PTO, fully tooled, 4 hyd jacks, 300 of 2-7/8 x 20 Mayhew Reg. pipe, excellent condition, working daily Price: $195,000
INGERSOLL RAND TH55 (Ref#6259N) Manufactured 1987, mounted on International S2500, 600/250 air compressor, 3 x 4 mud pump, injection pump, 300 of 3 ½ drill pipe Price on request
INGERSOLL RAND TH55
(Ref#6672Nb) Manufactured 1986,
mounted on 1986 International S2500, 600/250 air compressor, 3 x 4 centrifugal
mud pump, water injection, good condition Price: $135,000
PRICE REDUCED: $110,000
INGERSOLL RAND TH55
(Ref#5610N) Manufactured 1985,
600/250 air compressor, 26,500# pullback, 28,000# hydraulic winch, bailer line,
Cat water injection, electric oiler, mounted on 1985 International 2500 truck
with newly rebuilt 6V92 Silver engine, 13 speed Roadranger transmission, new
tires, 4 hyd leveling jacks, working daily, ghood condition, 300 of 4-1/2 x
20 drill pipe, 6 hammer Price: $110,000
INGERSOLL RAND TH55 (Ref#1154N) Manufactured 1982, 600/250 air compressor, PTO, mounted on International tandem axle truck w/Detroit 6V92 engine, water injection, transfer case, tophead and engine overhauled, good tires, some tools, 380 of 2-7/8 IF x 20 drill pipe, good condition, stored inside Price: $105,000
INGERSOLL RAND TH55 (Ref#10803N) Manufactured 1985, 600/350 air compressor, mounted on 1985 GM truck, 6V92 Detroit engine, PTO, standard pullback, 300 drill rod, basic tools Price: $145,000
INGERSOLL RAND TH55 (Ref#1047N) Manufactured 1977, Reconditioned 2006, LeRoi 100S2 air compressor, Mission 4 x 3 mud pump, Mounted on Mounted on Ford truck with Cummins 300 hp L10 engine, PTO, 8 gpm Bean water pump, 260 drill pipe, 15 8 stabilizer, mud pan Price: $140,000
INGERSOLL RAND TH55 (Ref#2976N) Manufactured 1986, 600/250 air compressor, mounted on International truck with Detroit 6V92 engine (rebuilt approx 500 hours ago)n Mission pump, 7 rod carousel, 500 of 4-1/2 pipe, 340 of 3-1/2 drill rod, (3) 6 hammers, (1) 4 hammer, (3) stabilizers, 4 leveling jacks, new transmission, painted Price: $100,000
1996 INTERNATIONAL 4700 WATER TRUCK (Ref#668N) 1000 gal tank, Rosewall grouter, new gear pump for bentonite Available at extra cost.
INGERSOLL RAND TH55 (Ref#2574N) Manufactured 1981, 5-1/2 x 8 Gardner Denver mud pump, 300/50 air compressor, no rod, no rod loader, mounted on 1989 Mack truck Price: $170,000
INGERSOLL RAND TH55 (Ref#8643N) 2 units available, Manufactured 1981, 600/250 air compressor, 3 x 4 Mission mud pump, mounted on 1981 International 6400 with Detroit 6V92 diesel engine, mainline and sandline winch, PTO, POR
INGERSOLL RAND TH55 (Ref#5611N) Manufactured 1981, 600/250 air compressor, 26,500# pullback, bailer line, Myers injection pump, electric oiler, mounted on 1981 International truck with Detroit 6V92 engine, 10 speed transmission, 4 hydraulic leveling jacks, working daily, good condition, 6 hammer, no pipe (set up fro 3-1/2) Price: $80,000
INGERSOLL RAND TH55
(Ref#3856N) Manufactured 1977, with
TH60 mast, PTO, mounted on 1977 International Loadstar with DT466 engine,
500/125 air compressor, no mud, Myers water injection, casing driver, sandline &
mainline, retractable table, hydraulic breakout wrench, 1 front & 2 rear
hydraulic leveling jacks, 200 of 4 ½ x 20 drill pipe, no tools Price:
$60,000 PRICE REDUCED: $49,500
INGERSOLL RAND TH55
(ref#254N) Manufactured 1977,.
600/150 air compressor, 3 x 4 centrifugal mud pump, 35 mast, mounted on 1977
Autocar with Cummins engine, 400 of 4-1/2 OD drill pipe, stabilizer, bits,
subs, etc., good condition Price: $105,000 PRICE REDUCED:
$90,000
INGERSOLL RAND TH55
(Ref#8368N)
Manufactured 1975, PTO, mounted on Kenworth (needs replacing), Leroi 450/ 250
compressor, no mud, some pipe Price: $55,000 PRICE
REDUCED: $40,000
INGERSOLL RAND TH55
(Ref#7717N) Manufactured 1972,
extended mast, PTO, mounted on 1966 Kenworth with Detroit 6V92 engine, 650/125
air compressor, no mud, water injection, gearmatic winch, 4 leveling jacks, no
pipe or tools available Price: $40,000 REDUCED:
$30,000
CYCLONE TH55
(Ref#409Nb) Manufactured 1975,
600/150 air compressor, 671 Detroit diesel engine runs air, mounted on GMC truck
with 6V53 Detroit diesel, PTO, 3 hydraulic leveling jacks, winch, sandline, Bean
water injection, no casing hammer Price: $105,000
PRICE REDUCED: $55,000
Pipe available at additional cost.
INGERSOLL RAND TH55 (Ref#8591) LeRoi 50 SDS compressor, needs hydraulic system and compressor clutch, also needs new truck Price: $45,000
INGERSOLL RAND TH55 (Ref#8676N) Manufactured 1970s, mounted on International truck, PTO, mud pump, no air compressor POR
INGERSOLL RAND TH50 (Ref#7644) Mounted on 1992 International truck with DT466 engine, 5 x 6 Gardner Denver mud pump, 400/200 air compressor Price: $120,000
INGERSOLL RAND TH50 (Ref#9052N) Maufactured 1977, mounted on Autocar with 230 Cummins engine, high torque tophead drive, 160cfm screw compressor, 3x4 centrifugal mud pump, 225 of 4 ½ drill pipe, good condition, ready to go Price: $95,000
CYCLONE 35 / TH50 (Ref#4475N) Mounted on 1973 Ford 6 wheel drive, 36 HD engine, new tires, Gardner Denver 5 x 6 mud pump, air compressor, 3 x 15 rod with Mayhew Jr threads.
1981 Ford Tulsa 8 flatbed, 1200 gallon flat tank, 200 amp arc welder
Price for both:
$55,000 REDUCED TO: $35,000
TH50 CYCLONE/INGERSOLL RAND (Ref#15436) Manufactured 1972, 5x6 Failing mud pump, 2-stage IR 580/360 air compressor, high torque 4 motor topdrive, mounted on Chevy 9500 tandem axle truck with 671 Detroit engine, PTO, 3 leveling jacks, handling tools, new shaleshaker, 400 2-3/8 IF x 15 pipe (200 of heavy wall, 200 of reg pipe), bits, subs, excellent condition Price: $95,000
INGERSOLL RAND TH50
(Ref#2754Na) (2) 3x4 centrifugal
mud pumps, 190 4-1/2 x 15 drill steel, mounted on 1990 Volvo, L10 Cumins, 9
speed transmission, good condition, no air, no tools Price:
$105,000 PRICE REDUCED: $75,000
CYCLONE/INGERSOLL RAND TH50 COMBINATION RIG (Ref#15080) mounted on 1978 diesel truck, IR Model 15T type 30 air compressor, 4-1/2 x 5 mud pump, 400 of 2 pipe, 1000 of 1 pipe, hammer, mud pan Price on Request
INGERSOLL RAND T5 MAST AND LARGE HEAD
(Ref#5447N) To be susupended from
crane, 18 diameter drill pipe for 20 depth, up to 48 diameter, Manufactured
1995, T5 top head, T5 tower, Cat diesel engine, (2) IR 1300/125 air compressors
(mounted on trailer), drill bar, no hammer, good condition Price:
$275,000 PRICE REDUCED: $150,000 (crane not included)
INGERSOLL RAND T5DH
(Ref#470)
Manufactured 1976 6000 depth capacity, Mounted on 3 axle Crane Carrier with
Detroit 671C diesel engine, Hydraulic leveling jacks, Fuller RTO-958LL, 1050/250
IR air compressor, Hammer oiler, water injection pump, Detroit 12V71 diesel
engine, 46 hydraulically raised mast, 140,000# pullback, deep hole package.
Dimensions/weight: 45L x 103W x 138 H 80,000 lbs., 2,000 of 5-1/2 x
30 IR drill pipe, located Mexico Price: $280,000 -
Off Market
INGERSOLL RAND RD20 III (Ref#735N) RD20 Range II base machine, 1250/350 IR air compressor, 10x6 Crane Carrier with Cat C13 (380 hp) engine, high torque rotary head (8,000 ft/lb 0-120 rpm), Range III derrick, 120,000# pullback, 755 hp Cummins QSK19 deck engine, auxiliary air manifold, 5 hydraulic jack legs, 35 gpm Cat water injection with foam, head position monitor, auxiliary mud manifold with hydraulic actuated valve (1500 psi), floating spindle sub, 60 gallon electric DHD lubricator, located Australia Price: $1,100,000
INGERSOLL RAND RD20-III (Ref#1584N) Manufactured 2007, 4900 hours, 1250/350 IR compressor on deck, 3400 hours, Cat 27 deck engine, Range III mast (45 stroke), 120,000# pullback, mounted on Crane Carrier with Cat C13 diesel engine, leveling jacks,. 1170/350 aux compressor and 1000 psi booster on 45 flatbed, 5 substructure, 5000 of 4-1/2 x 30 drill pipe, (3) pipe trailers, doghouse, 210 barrel water tank Price: $1,500,000
INGERSOLL RAND RD20-III (Ref#15621Na) Manufactured 2004, 17,673 hours, idle since March 11, 2009 (company went to deeper work), Cat 3412E deck engine, HR 2.5 Series IR 1250 cfm/350 psi air compressor, Range III tower package, mounted on 5 axle carrier with 9418 miles. Recent repairs: new gearbox 15,000 hours, all new hydraulic pumps and rebuit carousel 16,000 hours, replaced compressor with rebuilt compressor (16,200 hours), installed new cam in deck motor 16,500 hours, new injectors and new engine oil pump. Price: $480,000
INGERSOLL RAND RD20-III (Ref#15621Nb) Manufactured 2005, 16,112 hours, idle since August 11, 2009 (company went to deeper work), Cummins QSK 19C deck engine, HR 2.5 Series compressor rated 1250 cfm/350 psi, Range III tower package, mounted on 5 axle carrier with 8770 miles, recent repairs: May 2009 rebuilt compressor, Dec 2009 new turbo Price: $480,000
INGERSOLL RAND RD20 III (Ref#653N)
Manufactured 2006
Ingersoll Rand 1250 CFM / 350 PSI model HR 2.5 air compressor
CAT 3412E (760 hp) diesel engine on deck
Mounted on 10 x 6 crane carrier, powered by Cat C13 (300 hp) diesel engine, front axle 44,000#, rear axle 69,000#, 10 speed transmission
5 hydraulic leveling jacks
Mast 60 hydraulically raised, 120,000 # pullback, 30,000# pulldown
48 to 51 clearance under head, handles Range III casing
4SF212 spur gear head, rotation torque 0-120 RPM, 8000 ft-lb torque
2 ½ ID spindle, 125°F ambient cooling system
25 ½ table opening with bushings removed, centralized table
60 gallon DHD lubricator, CAT 25 GPM water injection pump,
5 rod drill pipe carousel, 7500# casing hoist,
5600 of 4 ½ x 30 IR drill pipe, stabelizers and subs,
(2) pipe trailers 40 x 8 wide, tandem rear axle,
3000# small single Reagan BOP (operated by nitrogen, no acummulator), manifold blow line and flanged
Auxilliary Ingersoll Rand air compressor, XHP 1070 CFM / 350 PSI, powered by 3406 CAT diesel engine, mounted on trailer with 2000 gallon fuel tank, starter, controls, gages,
Hurricane Booster, 2400 CFM / 1000 PSI, maximum suction 350 PSI, capacity at 350 PSI suction 2400 CFM, CAT C7 250 hp diesel engine, 125°F operating ambient temperature.
Oilwell duplex mud pump, Oilwell 214P 350 hp, 7 Ό x 14, powered by 8V92 (430hp) diesel engine, skid mounted, pulsation dampener, capacity with 7 Ό liners, will produce 665 GMP at 765 PSI, oilfield skid mounted
48 Great Dane trailer, doghouse, 2001 Komatsu dozer,
Good running condition and ready to drill, last drilled in June 2011
Package
Price: $1,500,000
PRICE REDUCED: $1,100,000
Will sell as package only.
Recent work done on the rig:
New 3412 Cat diesel engine Cost $75,000
New rebuilt mud pump
New 1230/350 air compressor Cost $40,000
New 3000 of 4-1/2 x 30 drill pipe @ $34 per foot cost - $102,000
New 40k generator cost $9,000
INGERSOLL RAND RD20 RANGE III (Ref#972N) Manufactured 2003, 1250/350 air compressor, Cat 3412E (760 hp) on deck, mounted on 5 axle carrier with Cummins diesel engine, hammer oiler, water injection pump.
Trailer mounted doghouse with generator
Trailer mounted 3000 gallon fuel tank and 2008 1170/350 IR air compressor
(2) steel trailers with tuger winches
4200 of 4-1/2 x 30 drill pipe
BOP, stabilizer, tools, sub
Cat D6 dozer
Complete turnkey drilling package
Price:
$925,000 PRICE REDUCED:
$825,000
INGERSOLL RAND RD20 (Ref#11529N) Manufactured 2003, 7,000 hours, 1150/350 air compressor, Caterpillar 3412 Deck Engine , HR2.5 Series Compressor , Range 3 Tower package , Seven rod Carousel , Sixty gallon Injection Lubricator, Twenty-Five GPM CAT water injection pump , Tattle tale indicator , Storage box under cooler , Diesel fired cold weather starting aid , Mounted on: Crane Carrier Corp. Model RD20R3 Carrier w/ CAT C12 engine, Miscellaneous Tools, 3000 of 4 ½ x 30 RD20 Drill Rod .337 Wall, , blowout preventor, substrcuture, Powers Water Level Indicator Price: $925,000
INGERSOLL RAND RD20 (Ref#383N) Manufactured 2003, 1250/350 IR air compressor (3634 hours), Cummins QSK 18 (700 hp) engine, mounted on 2003 Crane Carrier with Cat C10 (305 hp) diesel engine, complete with levelng jacks, 120,0003 pullback.
Support equipment:
2003 Peterbilt tractor, tandem axle, Cat C15 (475 hp) 653,201 miles
1980 Great Dane trailer, drop down 22 x 7-1/2, 3 axle, rolling tailboard
Great Dane trailer, drop down 22 x 7-1/2, 2 axle, rollig tailboard, doghouse on
1996 Trailmobile trailer, 48, 2 axle
1988 Fuehauf trailer, 48, 2 axle
Auxiliary air compressor
6,000 of 4-1/2 x 10 drill pipe
8 hammer, 6 hammer
Doghouse 20 long x 7-1/2 wide
Price: $800,000
INGERSOLL RAND RD20 (Ref#2208N) Manufactured 2003, 10500 hours, cleaned and painted, Range III mast, 1250/350 IR air compressor, Cummins QSK diesel deck engine, mounted on 3 axle rear carrier powered by C13 diesel engine, 110,000# pullback, currently drilling Price: $850,000
INGERSOLL RAND RD20-III (Ref#2897Na) Manufactured 2002, 6000 depth, IR 1250 cfm/350 psi IR HR2.5 air compressor on deck, 700 hp Cummins QSK diesel engine on deck, 62 x 110,000# pullback, hydraulic power head, mounted on 4 axle Crane Carrier with diesel engine, 3 hydraulic leveling jacks, hydraulic power feed arm to run 30 drill pipe or bottleneck pipe, arm is used to run Range III casingup to 45 long 2-3/8, 2-7/8, 4-1/2, 5-1/2, 7 8-5/8
Support equipment:
OILWELL 214P DUPLEX MUD PUMP 7-1/4 x 14 stroke, powered by twin 671 Detroit diesel engines, 500 hp, complete on skid
3,060 of 4-1/2 x 30 drill pipe
(4) 4.75 x 30 drill collars (1,200# per collar)
7 Reagan 3000# annular BOP
8-5/8 Dorla
Fold out pipe racks
Doghouse on flat bed trailer with cargo container, 45 kw generator, 130 bbl water tank
1981 International 4300 crane truck
Crew quarter trailer
PACKAGE PRICE: $800,000
INGERSOLL RAND RD20 (Ref#748N) Manufactured 2002, Cummins QLC deck engine, mounted on 4 axle crane carrier with 350 Cummins engine, Range III derrick, set up for 5 ½ drill pipe, currently drilling Price: $525,000
Pipe available at additional cost
INGERSOLL RAND RD20 (Ref#752N) Manufactured 2002, Range III derrick, 1250/350 air compressor, , 7 rod carousel, 1800 drill pipe, mounted on 4 axle Crane Carrier with 350 Cummins engine, only 5 hours on new 3412 Cat deck engine
1170/350 Fast track air compressor with low hours
Trailer with hammers, bits, collars
Price:
$800,000 PRICE: $730,000
INGERSOLL RAND RD20 III
(Ref#5271N) Manufactured 2001,
1250/350 IR HR2.5 air compressor, Cat 3412 (700 hp) deck engine, 120,000#
pullback, 13,950 drill engine hours, 13,950 compressor hours, 51 mast, single
rod loader, handles 4-1/2 x 30 drill rod, 25 gpm water injection pump, 60 gpm
hammer oiler, 18,000# main winch, 2,000# sand reel, mounted on Crane Carrier
with Cummins N14 engine, Eaton 8 speed transmission, diesel fired preheater,
collar handling package, tattletail indicator Price: $445,000
PRICE REDUCED: $375,000
INGERSOLL RAND RD20 (Ref#10562N) Manufactured 2001, 1250/350 air compressor, Cummins 700 hp deck engine, mounted on Crane Carrier with Cummins engine, 120,000# pullback, handles Range III casing, complete rig with 5000 of 4-1/2 x 30 drill pipe (3000 new, 2000 95%), currently working Price: $725,000 PRICE REDUCED: $550,000
INGERSOLL RAND RD20 (Ref# 8001N) Manufactured 2000, Cummins QSK 19C 600 hp deck engine (replaced, low hours) , 1250/350 compressor (replaced, low hours), mounted on 2000 HME Crane Carrier with Cummins L 10 diesel engine, 858LL 8-speed transmission, 466 hydraulically raised mast, 25-1/2 opening in table, 110,000# pullback, 7 rod carousel, breakout tongs, water injection, lubricator, 1 front 2 rear hydraulic leveling jacks, no pipe or tools Price: $375,000
INGERSOLL RAND RD20 RANGE III (Ref#550N)
Manufactured 2000,
- Range 3 Tower
- Top Head Drive
- 120,000 pound pullback
- 40,000 pound pulldown
- Cummins QSK 19 engine with 700 horse power
- Cummins Deck engine completely replaced in May 2008, rig ran 10 months since then, Guessing at 50 hrs on engine
- IR 1250/350 psi Deck Compressor
- Whisperwatt 15 Generator mounted behind cab for doghouse power
- Carrier Mounted drilling rig with Cat C 13 Engine
- 25 gpm water injection pump
- 55 gal hammer oiler
- Single Rod Loader
- New Main Derrick Lift cylinders installed in September 2008
- Newly rebuilt drivers cab for rig crane carrier
2006 Sullair Airpac: (unused)
- Model number 900XH1150
- Trailer Mounted
- Cat powered engines
- Twin air units rated for 350 PSI each
- Both air unit have approx 5100 hrs
- All units plumbed together
Custom Dog House:
- Easy Access Front Porch
- Custom Built House for all tools
- Storage areas
- Breezeway
- 3000 gal fuel cell
- Work Bench
- Drilling Supplies
- Night work lights
- All mounted on 40 trailer
Tubs and Pipe:
- 2 identical tubs with tugger winch mounts
- 6000 of 4-1/2 (2-7/8 IF) Star Iron pipe
Sub-Base:
- Height: 2 feet
- Width: 9 feet
- single unit with fold down front ramp
Miscellaneous:
- Center Rock 12 Hammer and stabilizer/Collar
- Center Rock 8 hammer and stabilizer/Collar
- Necessary change over subs
- Regan 3000# BOP and Air bowl (No Closing Unit)
- Air controlled Tugger Winch
- Air Slips
Pictures shown below were all taken this past winter.
The rig has not been used for drilling since these pictures were taken.
The drivers cab for the rig has been rebuilt.
(2) additional track mounted compressors
PRICE:
$750,000 PRICE REDUCED:
$500,000
INGERSOLL RAND RD20 II
(Ref#5270N) Manufactured 1998,
1250/350 IR HR2.5 air compressor (with in/out box), 110,000# pullback, 7,972
drill engine hours, 51 tower, Cummins QSK 19C (700 hp) engine on deck, single
rod loader, uses 4-1/2 x 30 drill pipe, 25 gpm Bean water injection pump, 60
gpm hammer oiler, mounted on Central Manufacturing carrier with Cummins N14
engine, diesel fired pre-heater, hallogen work lights Price:
$455,000 PRICE REDUCED: $365,000
INGERSOLL RAND RD20 (Ref#801Na) Manufactured 1997, 111,000# pullback, Cat 3406 engine, 5 speed transmission with deep reduction, IR 46 hydraulically raised 4 legged mast,mounted on 4 axle Crane Carrier, 43 x 86 x 2 high ramp subbase, well maintained Price for rig: $365,000
2002 INGERSOLL RAND 1170/350 AIR COMPRESSOR (Ref#801Nb) rebuilt with Cat C15 diesel engine, electric start, mounted on oilfield skid Price: $100,000
PRICE FOR RIG AND COMPRESSOR: $410,000
INGERSOLL RAND RD20 (Ref#6505N) Manufactured 1994, Rebuilt 2001, Range II, 6500 depth capacity, 1070/350 IR air compressor, Cummins diesel on deck, mounted on 4 axle Crane Carrier with Cummins L10 engine, 7 rod carousel, 25 spm water injection pump, 110,000# pullback, 3500 of 4-1/2 x 30 drill pipe Price: $500,000
INGERSOLL RAND RD20 (Ref#8148N) Manufactured in 1994 - put in service 1995, 1050/350 compressor, Cummins QSK engine, Mounted on 4 axle crane carrier, 4300 hours on replaced compressor and engine, No rods or tools. Price: $450,000
INGERSOLL RAND RD20 RANGE II (Ref#15397N) Manufactured 1991, refurbished, 1050/350 IR air compressor, 600 hp Cummins engine, complete with 5 substructure, BOP, 4500 of 4-1/2 x 30 drill pipe (90%), 4000 gal fuel tank, 1170/350 air compressor, Hurricane booster, doghouse, Miller welder/35 kw generator, night lights, walkways, stairs, railings, 120 and 360 and 380 hammers, 2 pipe trailers Price: $1,150,000
Available at extra cost:
500 BBL MUD SYSTEM new 2008, 500 bbl mud system , shale shaker, desander, desilter, 2 centrifugal pumps, full controls for mixing, 1 generator Price: $135,000
350 KW GENERATOR new 2008, in 18 container, 60 Series Detroit, full controls Price: $75,000
(2) EMSCO D500 DUPLEX MUD PUMPS 7-1/2 x 16 500 hp, gear and fluid ends refurbsihed, 650 hp Detroit engine, 3000# fluid ends, 5000# pulsation dampener, discharge pressure 970 psi/700 gallon per minute at 90 spm with 7-1/2 liners, oilfield skid, (1) 300 hours, (1) 500 hours Price: $135,000 each.
INGERSOLL RAND RD10 (Ref#5247N) Manufactured 1982, Rebuilt 2009, remanufactured 1050/350 IR air compressor (installed 2008), Detroit 12V92 deck engine (remanufactured 2007), single rod loader (rebuit 2008), 25 gpm Cat water injection pump, DHD lubricator, torque limit control, 45 hydraulically raised mast, 70,000# pullback, 30,000# pulldown, 378 clear under spindle, 0-94 rpm rotation speed, 86,400# max torque, dual motor spur gear rotary head 8,000 ft/lb torque (rebuilt 2008), new compressor oiler cooler, new hydraulic cooler, mounted on 1982 Crane Carrier 6 x 4 cab and chassis with Cat 3208 diesel engine, 3 hydraulic leveling jacks, 13 speed RT-613 transmission
2000 of 4-1/2 x 30 drill rods (2-7/8 IF)
(1) 6 x 18 straight ribbed stabilizer (2-7/8 IF pin x 3-1/2 Reg box)
(1) 8 x 15 straight ribbed stabilizer (2-7/8 IF pin x 4-1/2 Reg box)
(1) 11 X 15 straight ribbed stabilizer (2-7/8 IF pin x 6-5/8 Reg box)
(1) 12-1/4 sealed bearing tricone tooth bit
(1) Ingersoll Rand TD85 down-hole hammer
(1) Ingersoll Rand TD60 down-hole hammer
750/300 Ingersoll Rand auxiliary air compressor, 1989, powered by Cat 3306, mounted on oilfield skid
Rebuilding costs:
Air Compressor $63,300
12V92 engine (3000 hours)
Spur gear head $23,600
Single rod loader $19,500
New oil cooler $7,600
New hyd cooler $5,500
Excellent condition ready for immediate use
Package Price: $385,000
ATLAS COPCO T4W
(Ref#202N) Manufactured 2007,
approx 3800 hours, 1070/350 air compressor, spur gear head, Cummins QSK 15 deck
engine Price: $585,000 PRICE REDUCED: $550,000
INGERSOLL RAND T4 (Ref#344N) Manufactured 2007, 1250/350 air compressor, Cummins QSK19 deck engine, mounted on Crane Carrier with Cat 380 hp engine, pipe racks, 50,000# pullback, standard mast, 1600 hours on rig, 350 drill pipe, good running condition Price: $650,000
INGERSOLL RAND T4W
(Ref#321Na) Manufactured 2005, only
3500 hours, Cummins 755hp deck engine, mounted on CCC with Cat C13 380hp engine,
1250/350 air compressor, 50000# pullback, 3 carousels, water injection, 1 front
& 2 rear hydraulic leveling jacks, 350 of 4 ½ x 25 drill pipe Price:
$560,000 PRICE REDUCED: $525,000
1999 STERLING WATER TRUCK (Ref#321Nb) 1100 gallon flatbed steel tank, Cat 3406E engine, toolboxes, no crane or welder Price: $60,000
INGERSOLL RAND T4 (Ref#11572N) Manufactured 2003, hours 3800, 1070/350 IR compressor, 50,000# pullback, Cummins OFX, 600hp (300 hours since new), 1800 of 4-1/2 x 25 x 2-7/8 IF connection drill pipe, Mounted on Crane carrier w/ Cat C12 diesel 355hp, spur gear head, hammer oiler, Table bushings, 2 carousel, 2 winches, Good clean rig Price: $380,000
INGERSOLL RAND T4W (Ref#214Nb) Manufactured 2003, 1050/350 air comressor, new Cummins QSX 15 deck engine (approx 1000 hours), new worm gear head assembly with approximately 1000 hours, (3) carousels for carrying extra rod, mounted 2003 Crane Carrier p/b Cat C12 engine (360 hp), Jake brake, total drill hours approx 5,000, 1,800 of 34-1/2 x 25 drill rod, subs, bushings, all necessary accessories excellent condition Price: $410,000
INGERSOLL RAND T4W (Ref#6841N) Manufactured 2001, 1070/350 air compressor, 10,0000+ hours, worm gear Price: $260,000
INGERSOLL RAND T4 (Ref#14685) Manufactured 1999, 6000 hours, 900/350 IR air compressor, Cummins QL19 diesel engine on deck, 50,000# pullback, mounted on Crane Carrier with Cummins L10 diesel engine, 16,000 miles, no drill pipe, 6 hammer, 6 bit, 2 winches, 2 carousels, hammer oiler, water injection pump, good condition, well maintained Price: $370,000
INGERSOLL RAND T4 (Ref#15392N) Manufactured 1999, rebuilt Cat C15 deck engine with only 400 hours, mounted on International 12 wheeler with diesel engine, 1050/350 Sullair air compressor, only 600 hours, no pipe, located Canada Price: CAD$205,000
INGERSOLL RAND T4 (Ref#499Na) Manufactured 1998, 1070/350 air compressor, spur gear head, high torque, standard pullback, 3 speed Jake brake, carousel, 2 winches, water injection, hammer oiler, Cummins deck engine (overhauled), 1400 of 4-1/2 x 25 drill pipe, repainted Price: $400,000
Available at extra cost:
1999 STERLING WATER/SERVICE TRUCK (Ref#499Nb) Rosewall bed (2004), 1800 gal flat tank, crane, toolboxes
INGERSOLL RAND T4W
(Ref#1687N) Manufactured 1998,
900/350 air compressor, 50,000# pullback, 9,000 frame hours, Cummins QSK19 deck
engine (rebuilt 4500 hours ago), worm gear head, 18 gpm Bean pump, 7 gpm oiler,
7/4 rod carousel, mounted on Crane Carrier with Cummins L10, Jake brake, locking
rear, 15,000 miles, 280 drill pipe and tools, rig to be painted and is well
maintained and ready for work Price: $250,000 PRICE
REDUCED: $225,000
INGERSOLL RAND T4W
(Ref#5791N) Manufactured 1997,
900350 air compressor, Cummins QSK19 engine, 50,000# pullback, mounted on Crane
Carrier with Cummins L10 engine7 and 4 rod carousels, Price:
$280,000 PRICE REDUCED: $265,000
Pipe and additional tools available at exta cost
INGERSOLL RAND T4 (Ref#13826N) Manufactured 1996, 1070/350 HR 2.5 air compressor, QSK 19 Cummins (600 hp) deck engine (2000 hours replaced by Cummins), Mounted on Crane Carrier with L10 Cummins, Jake brake, 9 speed Fuller transmission with lo-lo, diesel fired preheater for front and deck motors with auto start capability, 50,000# pullback, 50 gal auto hammer oiler, hydraulic centralizer for 7 rod carousel, 4 rod carousel, angle drill package, worm gear head, 25 gpm Cat injection pump, hot weather cooling package, 1000 of 4-1/2 x 25 pipe (3-1/2 Reg), 2 winches, (2) 6 hammers, Miller Bobcat 225 welder mounted on deck, water proof rod box, 6-5/8/7 surface casing lifts, cement mixing drill and paddle, chain wrench, cutting diverter, hammer and drill pipe wrenches, 2 sets slips, casing slips for 4-1/2 OD plastic set up blocks for jacks, 50 gpm gas powered transfer pump and hoses for water-acetyline torch set,
Includes 1975 Peterbilt water truck, with 1800 gallon Flatwater Fleet tank, 350 Cummins engine, Jake, 13 speed Fuller transmission, hendrickson suspension, hammer and bits
Package Price:
$305,000
REDUCED TO $270,000
INGERSOLL RAND T4 (Ref#6297N) Manufactured 1995, 1050/350 air compressor, Cummins KTA19C engine on deck, Posi-track, mounted on Crane Carrier with Cummins L10 engine, no pipe, no hammers Price: $300,000
INGERSOLL RAND T4W (Ref#9842Na) Manufactured 1995, 4000 total hours, rebuilt Cummins K-19 deck engine, only 1500 hours, mounted on 4 axle custom chassis, with new Cummins M-11 engine, only 700 miles, extended mast, proheat heater, 75 of 10 drill pipe, QL 120 hammer, 18 IR hammer bit, 20 hammer bit, many extras & spares
Price: $375,000
INGERSOLL RAND T4W (Ref#7199R) Manufactured 1994, only 6000 hours, Cummins deck engine, mounted on CCC with Cummins engine, 6 8 & 12 hammers, 300 drill pipe Price: $265,000
INGERSOLL RAND T4 (Ref#1841N) Manufactured 1994, Rebuilt 2006, 1730 hours, 1070/350 IR compressor (rebuilt), Cummins KTA19C (600 HP) diesel engine (rebuilt), Mounted on Crane Carrier with Cummins L10 diesel engine, 50,000# pullback
The following work was done:
Complete rebuild of rig and components
Remanufactured Cummins engine KTA19C 600HP @ 2100 RPM from Cummins (upgraded from original 545 HP @ 2100 RPM)
Remanufactured IR compressor HR2.5 1070 CFM @ 350 PSI
Rebuilt funk box
Rebuilt or new hydraulic pumps and motor
Rebuilt hydraulic cylinder
All new hydraulics and air hose
New and upgraded radiator
New and upgraded air compressor, oil cooler and hydraulic oil cooler
Valve spool rebuilt new seals and control handles
New feed chains upper and lower - Upgraded
New front leaf springs on carrier
New gauges
New wire harness
Rig and all parts sandblasted and painted grey and red
Price: $325,000 PRICE REDUCED: $300,000
INGERSOLL RAND T4 (Ref#7912N) Manufactured 1994, 1050/350 HR2 air compressor (rebuilt), 50,000# pullback, K19 Cummins deck engine (rebuilt), mounted on 1991 Crane Carrier, carousel, Price: $230,000
Pipe at extra cost
INGERSOLL RAND T4 (Ref#9703) Manufactured 1994, 4400 hours, 900/350 IR air compressor, Cummins KT19C (525 hp) diesel engine on deck, mounted on Crane Carrier w/Cummins L10 diesel engine (300 hp), 4-1/2 x 25 drill pipe (11 jts), hammer oiler, water injection pump, table bushings, handling tools Off Market
INGERSOLL RAND T4 (Ref#6517N) Manufactured 1993, 36 mast, 37,000# pullback, 1050/350 air compressor, Cummins K19 deck engine, mounted on Crane Carrier with Cummins L10, 17-1/2 IR bit, 12 hammer (like new), 500 star drill pipe, (4) 6 drill collars, (1) 8 drill collar, miscellaneous tools Price: $330,000 price reduced: $270,000
INGERSOLL RAND T4
(Ref#79Na) Manufactured 1991,
1050/350 air compressor, 70,000# pullback, worm drive, Cummins KTA19C (600hp)
rebuilt, 25 gpm water injection, 7 and 4 rod carousel, mounted on Crane Carrier
with L10 Cummins, 8LL transmission, 300 4-1/2 x 25 drill pipe
Price:
$275,000 PRICE REDUCED: $210,000
2006 INGERSOLL RAND 1175 CFM/350 PSI AIR COMPRESSOR (Ref#79Nb) fast track, Cat C15 engine, 695 hours, Price on Request
48 JOINTS (1200) 4-1/2 x 25 drill pipe (Ref#79Nc) T4 pipe, 65% Price: $450 per joint
INGERSOLL RAND T4 (Ref#300N) Manufactured 1991, 900/350 HR2 IR compressor, Cummins KTA19C diesel engine on deck, 500 hours on rebuilt (600hp), Mounted on Crane Carrier powered by L10 Cummins diesel engine, 3 hydraulic leveling jacks, Hammer oiler, Water injection pump, 2 drill pipe carousel, 2 winches, 300 of 4 ½ x 25 drill pipe, 6 hammer & 6 hammer bit, Pipe lifting sling, Table bushings, Wrenches Price: $230,000
INGERSOLL RAND T4 (Ref#4452N) Manufactured 1990, 900/350 HR2 IR air compressor, spur gear tophead, Cummins KTA 19C (525 hp) diesel engine on deck, 25 gpm Cat water injection pump, 37,500# pullback, mounted on HME carrier powered by Cummins NTC 315 hp engine, 275 of 4-1/2 x 25 drill pipe
Machine hours approximately 12,000
Deck engine replaced with remanufactured one by Cummins 12/01 (5700 hrs)
Air compressor re-bearinged by IR 12/01 (5700 hrs)
Derrick completely rebuilt (chains, sprockets, cylinders and bushings) 12/08
Spur gear head completely rebuilt 11/08 (860 hours)
All fluids and filters changed at recommended intervals
Price: $235,000
INGERSOLL RAND T4 (Ref#15391N) Manufactured 1990, Cat deck engine, mounted on Kenworth 10 wheeler with rebuilt Cat engine, 900/350 Sullair air compressor, located Canada Price: CAD$195,000
INGERSOLL RAND T4 (Ref#2698Na) Manufactured 1988, 2200 hours, Cummins deck engine, mounted on crane carrier with Cummins engine, 0 hours on rebuilt 900/350 air compressor, standard mast & pullback, spur gear head, water injection, line oiler, 1 front & 2 rear hydraulic leveling jacks, 1000 of pipe, hammers, bits, subs, etc Price: $175,000
INGERSOLL RAND T4BH (Ref#403N) Manufactured 1988, 900/350 air compressor, 1 carousel, Cummins on deck, spur gear head, mounted on Hendrickson Carrier with Cummins L10 engines Price: $150,000
INGERSOLL RAND T4W (Ref#342Na) Manufactured 1987, 900/350 air compressor, mounted on Crane Carrier, 70,000# pullback, completely rebuilt, 2700 of 4-1/2 x 25 drill pipe Price: $210,000
INGERSOLL RAND T4
(Ref#301N)
Manufactured 1986, 900/350 HR2 IR compressor, Cummins KTA19C diesel engine. 1000
hours on rebuilt (600hp), Mounted on Crane Carrier w/ L10 Cummins diesel engine,
3 hydraulic leveling jacks, Hammer oiler, Water injection pump, 2 drill pipe
carousel, 2 winches, 300 of 4 ½ x 25 drill pipe, Pipe lifting sling, Table
bushings, Wrenches, 6 hammer & 6 hammer bit Price: $205,000
PRICE REDUCED: $170,000
INGERSOLL RAND T4 LD DRILL PACKAGE (Ref#15041N) Manufactured 1986, rig hours 3128, miles on carrier 26,552, 70,000# pullback, tower handles 31, 900/350 air compressor, rig engine replaced 700 hours ago, mounted on Crane Carrier,
Also included: 12, 8 and 6 hammers with bits, 7 blow tube with BP, elevators, stabilizers, bit breakers, check valves, changeovers, adaptors, rig tools and spare parts
2006 Ingersoll Rand auxiliary compressor on Hudson trailer, 1170/350 compressor, 1929 hours
3,750 of 2-7/8 IF drill steel on 40 ton lowboy tandem axle trailer
7 x 12 doghouse on 18 gator tandem trailer (pre-wired and comes with head/AC
1,000 gal fuel tank with electric pump on tandem axle trailer
Package Price:
$550,000 PRICE REDUCED:
$400,000
INGERSOLL RAND T4 (Ref#8883N) carrier manufactured 1970s, fully refurbished, long tower, 70,000# pullback deep hole package, new top chain, , 900/350 IR over under air compressor (new), Cummins diesel engine on deck (new), mounted on 6 wheel drive Crane Carrier, hammer oiler, water injection pump, carousel, runs 25 drill pipe in carousel or 30 using sling Price: $195,000
INGERSOLL RAND T4
(Ref#4057N) Manufactured 1985,
70,000# pullback, 900/300 air compressor, mounted on Crane Carrier, 1500 of
pipe Price: $225,000 PRICE REDUCED: $205,000
INGERSOLL RAND T4 (Ref#1178N) Manufactured 1985, 900/350 HR2 IR compressor, Mounted in Crane Carrier with Cat 3208 diesel engine, 3 hydraulic leveling jacks, Engine and compressor were rebuilt in 2005, Hammer oiler, Water injection pump, (3) hammers: (2) 6 & (1) 8, 8 TCI bit with 10 stabilizer, (3) Petol chain wrenches, 700 of 4-1/2 x 25 x 2-7/8 IF drill pipe, Subs, handling tools, pipe lifting sling
Price: $225,000
INGERSOLL RAND T4W (Ref#340N) Manufactured 1984, 900/350 air compressor, 70,000# pullback, Detroit 12V71T diesel deck engine, Bean pump, oiler, mounted on Crane Carrier with Cat 3208 Price: $135,000
INGERSOLL RAND T4W (Ref#1563Na) Manufactured 1982, 900/350 air compressor, 12V71 Detroit diesel deck engine, spur gear head, mounted on Crane Carrier with Cat 3208 engine, new paint, ready to drill Price: $105,000
INGERSOLL RAND T4 (Ref#236Nb) Manufactured 1981, 900/350 air compressor, Cummins KT450 diesel engine on deck, mounted on Crane Carrier with Cat 3208 diesel engine, 2 carousels, 2 winches, hammer oiler, water injection pump, 300 of 4-1/2 x 25 drill pipe, currently drilling Price: $185,000
INGERSOLL RAND T4 (Ref#11036N) Manufactured 1981, low hours, 12V71 Detroit deck engine, mounted on crane carrier with 3208 Cat engine, 900/300 air compressor, Atlas 2000 casing hammer, carousel, hammers, 500 of 4 ½ drill pipe Price: $135,000
INGERSOLL RAND T4 (Ref#5921N) Manufactured 1981, 900/350 air compressor, GM12 cylinder deck engine, needs small repairs, 1,675 of 5-1/2 drill pipe
4 axle Renault R-D320 Service Truck, 1000 gal water tank, 300 gas fuel tank
Located Europe
Package Price: 130,000 (Euros)
INGERSOLL RAND T4 (Ref#14451Na) Manufactured 1980, 1050/150 air compressor, Detroit V12 diesel deck engine, Detroit V6 diesel in Crane Carrier, standard pullback, 10 gpm water injection, carousel holds 250 drill pipe, 300 drill pipe included, good running condition Price: $95,000
INGERSOLL RAND T4W (Ref#10734Na) Manufactured 1980, 900/250 air compressor, 12V71TA Detroit diesel deck engine (rebuilt), mounted on Crane Carrier with Detroit 6V92 Detroit diesel engine, 24 gpm water injection pump, hammer oiler, R3000 Atlas casing hammer, hammers, bits. Rig was set up with 75,000# pullback but the hydraulics have been removed, 1000 drill pipe, good running condition OFF MARKET
2001 KENWORTH T800 WATER TRUCK (Ref#10734Nb) 1100 gallon flatbed, Detroit diseel engine, 10 speed transmission OFF MARKET
INGERSOLL RAND T4 (Ref#208R) Manufactured 1979, 900/350 air compressor, Detroit V12 diesel deck engine, mounted on Crane Carrier with Detroit 6V53 diesel engine (new), water injection pump, standard pullback and mast, 400 of 4-1/2 x 20 drill pipe and 480 of 3-1/2 x 20 drill pipe, good running condition Price on Request
INGERSOLL RAND T4 (Ref#1177N) Manufactured 1980, 750/150 air compressor, rebuilt tophead motor and pump, Detroit 8V71 on deck, mounted on Crane Carrier with Cat engine, spur gear head, hammer oiler, water injection, (has smaller rams on mast), 1 winch, 3 hydraulic leveling jacks, currently drilling Price: $60,000
Available at extra cost:
500 of 4-1/2 x 25 drill pipe
8V92 Detroit runner, 1 yr on inframe
INGERSOLL RAND T4 (Ref#9332N) Manufactured 1979, Detroit 12V71 deck engine, Detroit 6V53 engine, Crane Carrier, spur gear double motor head, new wheels, 400 4-1/2 x 25 drill pipe, new SD8 hammer with 2 new bits, (2) new tricone bits, new crawler bit, spare Detroit 8V92 engine, new paint Price: 125,000 (Euros)
INGERSOLL RAND T4 (Ref#10238N) Manufactured 1978, Cat 3412 deck engine, mounted on crane carrier with Cat 3208 engine, 1160/350 air compressor, 10000# & 8000# winches, good condition
Includes Peterbilt water truck, 1500 gallon tank Package Price: $170,000
INGERSOLL RAND T4 (Ref#821N) Manufactured 1978, 750 cfm air compressor, Detroit 8V71 deck engine, mounted on Crane Carrier with Detroit engine, 200 of 4-1/2 x 25 drill pipe Price: $70,000
INGERSOLL RAND T4
(Ref#15495N) Manufactured 1978,
350/150 screw air compressor, 8V71 Detroit on deck, 5 x 6 Gardner Denver mud
pump, mounted on Crane Carrier with Cat 3208 engine, Bean water injection pump,
hammer oiler, spur gear top head (completely rebuilt), carousel, winch, painted,
sitting for one year Price: $55,000 PRICE REDUCED:
$45,000
INGERSOLL RAND T4 (Ref#6770Na) Manufactured 1977, 750/150 air compressor, Cummins Big Cam 350 on deck, mounted on Crane Carrier with 501 gas engine, hammer oiler, water injection, carousel, 13 speed Fuller transmission, needs paint
1986 International Water Truck (6770Nb) 2000 gal Ballard flat tank water truck, 9 speed Fuller transmission, crane, welder, 200 gal transfer tank, set up for 25 T4 rod
Price on Request
INGERSOLL RAND T4 (Ref#2018N) Manufactured 1976, 600/250 air compressor, 318 Detroit diesel deck engine, mounted on Crane Carrier, 50,000# pullback, 9 gpm water injection, 7 rod carousel, 275 drill pipe, good condition Price: $105,000
INGERSOLL RAND T4
(Ref#1623N) Manufactured 1976,
50,000# pullback, 600/250 air compressor, 8V71 Detroit diesel on deck, mounted
on Crane Carrier with 6V53 Detroit engine, 5 rod carousel, rod racks, fully
tooled, 500 drill pipe, good running condition Price:
$115,000 PRICE REDUCED: $85,000
INGERSOLL RAND T4BH
(Ref#1563Nb) Manufactured 1976,
750/150 air compressor, 6V71 Detroit diesel deck engine, spur gear head, mounted
on Crane Carrier with 6V53 diesel engine, needs work Price:
$50,000 PRICE REDUCED: $35,000
INGERSOLL RAND T4 (Ref#14451Nb) Manufactured 1976, 750/250 air compressor, Detroit V12 deck engine, Detroit V6 engine in Crane Carrier, standard pullback and mast, 10 gpm water injection, carousel holds 250 drill pipe, 300 drill pipe included with rig, good running condition Price: $95,000
INGERSOLL RAND T4W
(Ref#4112N) Manufactured 1975,
750/250 air compressor, (rebuilt with less than 100 hours, Detroit 6V71 deck
engine, mounted on Crane Carrier with Detroit engine, 7 rod carousel, 4 rod
carousel, worm gear head, 37,000# pullback, water injection, hammer oiler, 6
Mission hammer (near new), single owner rig Price: $105,000
PRICE REDUCED: $80,000
INGERSOLL RAND T4W (Ref#360N) Manufactured 1975, 900/300 air compressor, 12V71 Detroit deck engine, mounted on Crane Carrier with Detroit 6V53 diesel engine, 10 speed tranmission, hammer oiler, water injection, standard pullback, worm gear head, 700 of 4-1/2 x 25 drill pipe (3-1/2 reg), 5-3/4 x 20 drill collar, (2) 5-1/2 hammers, sub 4-1/2 reg, (2) 6 tricones, drag bit system 7-7/8 12, skid mounted MCM centrifugal mud pump with engine, (2) 5 stabilizers, currently drilling, 8 new rear tires Price: $90,000
INGERSOLL RAND T4 (Ref#11854N) Manufactured 1975, 750/250 air compressor, Cat 3406 deck engine, mounted on crane carrier with Detroit 6V71 engine, standard mast & pullback, 7+4 carousel, line oiler, water injection, 3 hydraulic leveling jacks, 300 of 25 x 4 ½ drill pipe Price: $170,000
INGERSOLL RAND T4W (Ref#9773Na) Manufactured 1973, 1500 depth capacity, 900/300 IR air compressor, 12V71 Detroit diesel on deck (rebuilt), mounted on tandem axle Crane Carrier with Detroit diesel engines, 3 hydraulic leveling jacks, hammer oiler, water injection pump, 300 of 4-1/2 x 25 drill pipe, 6 hammer and biyt, handling tools, pipe lifting slips, 2 carousels Price: $95,000
Available at extra cost: Rebuilt 12V71 Detroit diesel engine, 500 of 4-1/2 x 25 drill pipe, Holt casing hammer
INGERSOLL RAND T4W (Ref#9773Nb) Manufactured 1974, 1500 depth capacity, 900/300 air compressor, 12V71 Detroit diesel on deck, mounted on tandem axle carrier with Detroit diesel, 3 hydraulic leveling jacks, 300 of 4-1/2 x 25 drill pipe, hammer oiler, water injection pump, handling tools, pipe lifting sling Price: $95,000
Available at extra cost: 1,200 of 4-1/2 x 25 drill pipe, (5) 6 drill pipe
INGERSOLL RAND T4W (Ref#3468N) Manufactured 1974, 750/250 air compressor, Detroit 12V71 deck engine, standard mast and pullback, water injection, mounted on Crane Carrier with Detroit 6V53 engine. Mud pup on trailer, 800 of 4-1/2 x 25 drlll pipe, fully tooled, ready to go.
Also includes 1987 Intrernational truck, 20 bed with lift gate, diesel engine
Package Price: $95,000
INGERSOLL RAND T4 (Ref#12868) Manufactured 1974, Reworked 1981, 82,000# pullback @ 3500 psi, 117,000# pullback @6000# psi, custom made mast with 8-1/2 pullback cylinders, 750/250 air compressor, 24 table opening, 8V92T Detroit diesel on deck, mounted on Crane Carrier with 560 V8 gasoline engine, single chain pulldown triple wide (3) row 4 wide, runs 20 drill pipe, heavy duty roller chain head, hammer oiler, water injection pump, weight indicator. Good for large diameter hole Price: $145,000
INGERSOLL RAND T4W (Ref#11530N) Rebuilt XHP 900/350 air compressor, IR T5 head, 70,000# pullback, Cummins KTA19C deck engine (600 hp), mounted on 1978 Crane Carrier with Cat 3208 engine, 75 jts of 4-1/2 x 25 drill pipe Price: $230,000
INGERSOLL RAND T4 (Ref#5155) Manufactured 1978, 750/250 air compressor, single motor spur gear head, 8V92 Detroit diesel on deck, hammer oiler, water injection, Mounted on Crane Carrier with 6V92 Detroit diesel, 5 rod carousel, 1 winch for rod handling Off Market
1300 of 4-1/2 x 25 drill pipe
6 hammer, 12 hammer subs and bits available at extra cost.
INGERSOLL RAND T4 (Ref#13908) Manufactured 1977, 750/250 IR air compressor, 12V71 Detroit deck engine, mounted on Crane Carrier with Detroit 6V71 diesel engine, 400 of 4-1/2 x 25 drill pipe, hammer oiler, water injection pump, (2) pipe carousels, 2 winches, handling tools, 6 hammer, 6 bit, currently drilling Price: $100,000
INGERSOLL RAND T4 (Ref#14422N) Manufactured 1975, XL640 compressor, 640 CFM/125 PSI runs at 180 PSI, 8V92 Detroit diesel on deck, Mounted on Crane Carrier with Detroit DT466, 3 hydraulic leveling jacks, 600 of 4-1/2 x 25 drill pipe, Table bushings, Handling tools, Water injection pump, Hammer oiler Price: $60,000
INGERSOLL RAND T4 (Ref#12527N) Manufactured 1975, 750/250 air compressor, Detroit 12V71 deck engine, mounted on Crane Carrier with Detroit 6V53 engine (both engines rebuilt), water injection, 7 and 4 carousel, jib boom, standard mast and pullback, line oiler, 300 of 4-1/2 x 25 drill pipe, 3 hydraulic leveling jacks, tools, good condition, currently drilling Price: $95,000
INGERSOLL RAND T4 (Ref#2389N) Manufactured 1975, 750/250 air compressor, Cat 3406 diesel deck engine, mounted on all-wheel drive Crane Carrier with 6V71 Detroit diesel engine, 3 leveling jacks, (2) 6 rod carousels, good condition, drilling daily Price: $150,000
INGERSOLL RAND T4W (Ref#7576R) Manufactured 1974, Detroit 12V71 deck engine, rebuilt 2006, mounted on CCC with Detroit 6V53 engine, 750/250 air compressor, 2 carousels, 2 jib booms, Bean 10gpm water injection, 200 drill pipe Price: $85,000
INGERSOLL RAND T4 (Ref#127N) Manufactured 1974, rebuilt, 70,000# pullback, 900/350 air comressor, mounted on Crane Carrier with Detroit diesel engine, Cummins 19C diesel on deck, 2200 of near new 4-1/2 X 25 drill pipe
1996 winch truck with water tank
Tandem axle truck for drill pipe diesel engine
Complete with all tools
Currently drilling
Price without the winch truck: $175,000
Package Price: $200,000
INGERSOLL RAND T4 (Ref#7697N) Manufactured 1974, 600/250 air compressor, 318 Detroit diesel deck engine, mounted on Crane Carrier with International engine, worm gear head, 10 gpm water injection, 7 rod carousel, fully tooled, (2) hammers, 300 drill pipe, good running condition Price: $75,000
INGERSOLL RAND T4
(Ref#236Na) Manufactured 1974,
600/250 air compressor with 2-stage gear box now 750/250, 12V71 Detroit diesel
engine, 2 carousels, 2 winches, mounted on Crane Carrier with 6V53 Detroit
engine, 13 speed transmission, compressor and engine rebuilt 2005 Price:
$120,000 OFF MARKET
INGERSOLL RAND T4
(Ref#11853) Manufactured 1973,
600/250 air compressor, Detroit 8V71 deck engine, mounted on Crane Carrier with
501 gas engine, 37,500# pullback, standard mast, 15 stabilizer, breakout tools,
carbide roller cone bit, 3 hydraulic leveling jacks, 6 hammer, 300 pipe,
currently drilling, good condition Price: $70,000
OFF MARKET
INGERSOLL RAND T4 (Ref#3704N) Manufactured 1973, rebuilt Detroit 8V92 deck engine, mounted on crane carrier with Cummins engine, 600/250 air compressor, standard mast & pullback, water injection, 3 hydraulic leveling jacks, fully tooled, 900 of 4 ½ x 25 drill pipe, good condition, currently drilling Price: $120,000
INGERSOLL RAND T4
(Ref#4688Na) Manufactured 1973,
Detroit diesel deck engine, mounted on CCC with 501 gas engine, 600/250 air
compressor, standard mast & pullback, Bean water injection, 1 front & 2 rear
hydraulic leveling jacks, 500 of 4 ½ x 25 drill pipe, all tools, ready to go
Price: $80,000 PRICE REDUCED: $60,000
INGERSOLL RAND T4 (Ref#10818) Manufactured 1973, 750/250 air compressor, 12V71 Detroit on deck, mounted on Crane Carrier with 501 International gas engine, 2 carousels, 2 winches, 60,000# pullback, 800 of 4-1/2 x 25 drill pipe, (2) 6 hammers, Bean water injection, 3 hydraulic leveling jacks, tools, currently drilling, good condition Price: $110,000
INGERSOLL RAND T4 (Ref#5843) Manufactured 1973, 600/250 air compressor, 8V71 Detroit diesel on deck, mounted on Crane Carrier with 335 Cummins, water injection, hammer oiler, carousel Off Market
INGERSOLL RAND T4 (Ref#3797N) Manufactured 1972, 600/250 air compressor, Detroit 8V71 diesel deck engine, mounted on Crane Carrier with International 466 engine, 475 drill pipe, currently drilling Price: $65,000
INGERSOLL RAND T4
(Ref#8388)
Manufactured 1971, 750/250 Sullair air compressor (4000 hours since rebuild),
12V71 Detroit diesel on deck, mounted on Crane Carrier with 6V53 Detroit diesel
engine, 275 of 4-1/2 x 25 drill pipe, hammer oiler, water injection pump, 6
hammer with bit, tools, good condition, currently drilling
Price:
$100,000 PRICE REDUCED: $60,000
Also available water truck for extra $8,000
INGERSOLL RAND 1500 TOP HEAD MUD RIG (Ref#742N) Manufactured 1991 for US Navy, 1500 depth capacity, 30,000# pullback, 11,000# pulldown, 60,000# rotary torque, mounted on 2 axle all terrain vehicle, can be 2 or 4 wheel drive, 140HP diesel hydrostatic drive engine, 3 hydraulic leveling jacks, 5 x 6 Garden Denver duplex mud pump, uses 20 drill pipe, jib boom, Cat 22 gpm injection pump, (2) motor top head, (2) Sunstrand hydraulic pumps, (1) Commercial shearing hydraulic pump, Funk gear box, rig being re-worked. Dimensions & weights: 19 L x 75 W x 7 H, weight: 24,800#.
PRICE:
$ 95,000
PRICE REDUCED: $78,000
ATLAS COPCO T3W (Ref#3048N) Manufactured 2008, 950/350 air compressor, mounted on International 7600 truck (8,986 miles) with C13 Cat engine, 4 jacks, C15 Cat deck engine (approx 1600 hrs), standard pullback and mast, Divertech diverter, 9 rod carousel, 7 gpm water injection, hammer over stabilizer with 9-3/4 bit, 600 3-1/2 x 20 (2-7/8 IF) drill pipe, great running condition Price: $500,000
ATLAS COPCO T3W (Ref#8432N) Manufactured 2008, 1070/350 air compressor, Cat deck engine, mounted on 2009 International 7600 truck with Cat C13 engine, 8,000# tophead, hydraulic welder, set up for 3-1/2 pipe, rig has 370 hours, no pipe, like new Price: $595,000
INGERSOLL RAND T3W (Ref#7630N) Manufactured 2008, approx 1300 hours, 1070/350 IR HR2 air compressor, Cat C15 (580 hp) deck engine, 8,000 ft/lbs 1 speed rotary head, 70,000# pullback, 36 tower, mounted on Peterbilt 367 truck with Cat C13 (380 hp) engine, Fuller 10 speed transmission, pipe spinner, 25 gpm Bean water pump, 7 gpm DHD lubricator, uses 4-1/2 x 20 drill pipe Price: $485,000
INGERSOLL RAND T3W (Ref#7379N) Manufactured 2007, approx 1000 hours, 1070/350 IR HR2.5 air compressor, Cat C15 (580 hp) drill engine, 36 tower, 40,000# pullback, 5,500 ft/lb 1 speed rotary head, mounted on Navistar 7600 truck with Cat C13 (380 hp) engine, Fuller 10 speed transmission, rod spinnder, 25 gpm Bean water pump, 7 gpm DHD hammer lubricator, 18,000# main winch, 3,000# aux winch, uses 4-1/2 x 20 rod size Price: $430,000
INGERSOLL RAND T3W (Ref#650N) Manufactured 2007, 1070/350 air compressor Cat C15 deck engine (5 year warranty on air compressor and engine), mounted on International Navistar with C15 Cat engine, hydro frac built into rig, (2) mechanical packers, 25 gpm water injection, 8 hammer bit, stabilizer, 7 rod carousel, standard mast and pullback, hammer and bit (new), 1500 hours on rig, excellent condition Price: $535,000
ATLAS COPCO T3W DH (Ref#8703N) Manufactured 2007, 225 hours, 1070/350 air compressor, 70,000# pullback, mounted on International 5600 Paystar truck, 20 table opening, rod loader, rod spinner, large sheave, 3 x 4 Mission centrifugal hydraulically operated mud pump, 300 of 4-1/2 x 20 drill pipe Price: $800,000
ATLAS COPCO T3W
(Ref#5280N)
Year 2006, approx. 3,500 hours, 1070/350 air
compressor, Cat C15 (560 hp) deck engine, compressor disconnect box, two speed
high torque head, 34.5 derrick, 18,000# drawworks, dual jib control, single rod
loader, 18 gpm Bean injection pump, 7 gal oiler, pro heater, T15 Wilden mud
pump, mounted on 2006 Mack Granite A1400 with 58,000# rears, set up for 3-1/2
drill pipe (can convert to 4-1/2 at no extra charge) Price: $495,000
PRICE REDUCED: $420,000
INGERSOLL RAND T3W (Ref#7268N) Manufactured 2005, 3000 engine hours, 1070/350 air compressor, 50,000# pullback, 30,000# winch, mounted on Peterbilt truck, 7 gal lubricator, single rod loader, Price: $525,000
ATLAS COPCO T3W (Ref#5821N) Manufactured 2005, 1070/350 air compressor, 25 gpm Cat water injection pump, 19,000# hoist, hydraulic sandreel, 32,000# pullback, mounted on Mack Granite truck 400 hp engine, automatic transmission, 23,000 miles, 7 rod carousel, rig holds 500 of 4-1/2 pipe, no pipe included, rig has 3000 hours Price: $455,000
Pipe available at extra cost.
INGERSOLL RAND T3W
(Ref#1242N) Manufactured 2005, 4800
hours, 1070/350 air compressor, Cat C15 (565 hp) deck engine, 32 derrick,
32,500# pullback, single rod loader, pipe spinnder, 18,000# main winch, 2000#
aux hoist, dual jib control, 7 gal DHD lub, 12 gpm Cat water injection, set up
for 3-1/2 x 20 drill pipe, mounted on Navistar 7600, no pipe, no tools
Price: $435,000 PRICE REDUCED: $395,000
INGERSOLL RAND T3W (Ref#6932N) Manufactured 2005, 3000 hours, 1070/350 air compressor, Cat C15 (565 hp) deck engine, 32 derrick, 32,500# pullback, single rod loader, pipe spinner, 18,000# main winch, 2000# aux hoist, dual jib control, 7 gal DHD lubricator, torque limit control, 12 gpm Cat water injection, mounted on Navistar 7600 truck, set up for 3-1/2 x 20 drill pipe, no pipe or tools included Price: $430,000
INGERSOLL RAND T3W
(Ref#2055N) Manufactured 2005,
1050/350 air compressor, Cat C15 deck engine, 46 extended mast, casing hammer,
mounted on 2005 Peterbilt with diesel engine, 15 gpm Bean water injection, 4
hydraulic leveling jacks, excellent condition, currently drilling Price:
$700,000 REDUCED TO $500,000
INGERSOLL RAND T3W (Ref#3101N) Manufactured 2004, deep hole 50,000# pullback, 1070/350 air compressor, mounted on Paystar 5600i with C13 (380 hp) engine, Cat C15 (565 hp) deck engine, four hole gear box, 2658 hours, four motor spur gear 2-speed head, 35 derrick with 30 max working clearance, 20 table opening, 18,000# drawworks with swing jib, 7-rod carousel with large pipe rack, 25 gal. Cat water pump, 7 gal. electric oiler, single rod loader, rod spinner.
Hydraulic pump 90 Series off gearbox for mu doperation, complete with controller, piping, hoses and 5 x 6 Gardner Denver hydraulic mud pump FXGAAD mounted on trailer.
1300 of 4 drill pipe
1977 Century flatbed trailer
2002 Shop made flatbed trailer
1998 Shop made flatbed trailer
1996 Freightliner 3-ton truck
(6) change overs
(1) 7-7/8 5 changer over sub with lift sub
(3) 6 x 20 bottom hole collars
(1) 12-1/4 mill tooth bit with change over and lift sub
(1) 9-5/8 air hammer bit
(1) 6-1/4 air hammer bit
(1) 6-1/4 carbit bit with 2 bit sub
(1) 7-7/8 carbide bit with 15 collar
(1) 6-1/4 mil tooth bit with bit sub
(1) 7-7/8 mill tooth bit
Price:
$500,000 OFF MARKET TILL MARCH
2012
INGERSOLL RAND T3W (Ref#5541N) Manufactured 2003, 3000 engine hours, 1070/350 air compressor, 32 derrick, Cat C15 deck engine @ 565 hp, 18,000# winch, 7 gal electric DHD lubricator, single rod loader, mounted on Navistar with Cat C12 (310 hp) Price: $280,000
INGERSOLL RAND T3W (Ref#8080N) Manufactured 2003, 2400 hours, 70,000# pullback, 1070/350 HR2 air compressor with disconnect clutch, Cat C15 (560 hp) deck engine, 20 table opening, 7 rod carousel for 4-1/2 and large rod box, Foremost floating shock sub, 18,000# main winch, 1000# aux winch, dual main winch controls, 2 speed head with torque limit control, rapid retract regenerative feed, 35 gpm Bean water injection, 7 gallon DHD oiler, mounted on 2003 International 5600i, 8015 miles, Cat C12 380 hp engine, 10 speed OD Roadranger, full locking tandem drive axles (PDL & Diff Lock), 80% tires or better, Price: $500,000
INGERSOLL RAND T3
(Ref#494N) Manufactured 2003,
900/350 air compressor, mounted on 2003 International 7600 truck, 9 rod
carousel, winch, 25 gpm water injection, 10 stabilizer, 6 hammer, one owner
rig, 4200 hours on rig, 20,000 miles on truck, 1000 drill pipe Price:
$390,000 PRICE REDUCED: $350,000
INGERSOLL RAND T3W (Ref#286R) Manufactured 2002, 900/350 air compressor, aprpox 600 hours, Cat C15 deck engine, 30,000# pullback, 32 mast, Bean 25 gpm injection pump, 18,000# winch, mounted on International 7600 truck with Cat C12 engine, Fuller 10 speed transmission, 62,000 miles, complete with 560 of 3-1/2 x 20 drill pipe Price: $290,000
INGERSOLL RAND T3
(Ref#1909Na) Manufactured 2002,
900/350 air compressor, 32,000# pullback, extended mast, 3406 Cat deck engine,
mounted on 2002 International truck with C12 Cat engine, new tires, 18 gpm Bean
water injection, 7 gpm oil injection, 7 rod carousel, rod box, 580 of 4-1/2
drill pipe, good running condition Price: $370,000 PRICE
REDUCED: $325,000
INGERSOLL RAND T3W (Ref#6564N) Manufactured 2002, approx 6,600 hours, 900/350 IR HR2 air compressor, Cat C15 (565 hp) drill engine, 32 mast, 5,500 ft/lb 1 speed rotary head, 30,000# pullback, mounted on Navistar 7600 truck with Cat C12 (380 hp_ engine, Fuller 10 speed transmission, 25 gpm Bean water pump, 7 gpm DHD hammer lubricator, 560 of 3-1/2 x 20 drill pipe (2-3/8 IF) Price: $285,000
INGERSOLL RAND T3 (Ref#4050Na) Manufactured 2001, Cat 3406 deck engine, mounted on International with diesel engine, 850/350 air compressor, standard mast & pullback, 9 rod carousel, line oiler, water injection, 4 hydraulic leveling jacks, hammer, stabilizer, 600 of 3 ½ drill pipe, ready to go Price: $220,000
Also available with one of the following:
2003 INTERNATIONAL WATER TRUCK (Ref#4050Nb) diesel engine, 700 gallon flat tank, 300 gallon aux fuel, no crane or welder Price: $22,500
2005 INTERNATIONAL WATER TRUCK (Ref#4050Nc) diesel engine, 700 gallon flat tank, 300 gallon aux fuel tank, no crane or welder Price: $24,500
INGERSOLL RAND T3W (Ref#6874N) Manufactured 2001, 5000 hours, 1070/350 compressor, Cat 3406E new with warranty 0 hours, 32,500# pullback, Pipe spinner, Single rod loader, Currently set up for 4-1/2 x 20, 18,000# winch Price: $350,000
INGERSOLL RAND T3W
(Ref#917N) Manufactured 2001,
900/350 air compressor, Cat 3406 diesel deck engine, mounted on 2002
International 2674 truck with 370 Cat engine, 4800 hours, second owner, 400 of
drill pipe, 7 rod carousel, rod rack, 18,000# winch, hammer oiler, water
injection Price: $325,000 PRICE REDUCED:
$295,000 PRICE REDUCED: $265,000
1,100 feet of drill pipe available at extra cost
INGERSOLL RAND T3W (Ref#8803Na) Manufactured 2000, only 4500 hours, Cat C15 deck engine with only 650 hours on rebuild, mounted on 2000 International 2674 with Cat C13 engine, 900/350 air compressor, 9 rod carousel, single rod loader, rod box, 18000# main winch, 18 gpm Bean water injection, 7 gallon electric hammer lubrication system, set up for 3 ½ drill pipe Price: $305,000
Pipe available at extra cost
Also available:
1986 INTERNATIONAL S1900 WATER TRUCK (Ref#8803Nb) 1300 gallon water tank, DT466 engine, 300 gallon fuel tank, toolboxes, good tires Price: $24,000
INGERSOLL RAND T3W
(Ref#5351N)
Manufactured 2000, 900/350 IR air compressor with clutch, Cat 3406 (465 hp) deck
engine, 26,500# pullback, 32 tower, 10,000 hours on drill engine and
compressor, 7 rod carousel, 12 rod box, uses 4-1/2 x 20 drill rod, Cat 21 gpm
water injection pump, 7 gpm hammer oiler, 18,000# winch, mounted on Paystar
5600i truck with Cat C15 (525 hp) engine, 13 speed Fuller transmission
Price: $285,000 PRICE REDUCED: $255,000
INGERSOLL RAND T3W (Ref#7032N) Manufactured 2000, approx 6000 hours, 900/350 air compressor, diesel deck engine, mounted on International truck with diesel engine, standard mast and pullback, 18,000# winch, 18 gpm water injection, line oiler, carousel, 4 hyd leveling jacks, set up for 3-1/2 pipe (no pipe or tools available), excellent condition Price: $320,000
INGERSOLL RAND T3 (Ref#1772N) Manufactured 2000, only 7000 hours, Cat deck engine, mounted on International with Cat engine, 900/350 air compressor, standard mast & pullback, 6 rod carousel, water injection, line oiler, main & aux winches, rod loader, pipe rack, 4 hydraulic leveling jacks Price: $250,000
400 of 4 ½ x 20 drill pipe available at extra cost
INGERSOLL RAND T3W
(Ref#10737N) Manufactured 2000,
1070/350 air compressor, 3406E Cat diesel (570 hp) deck engine, mounted on
International truck with 370 hp engine, 300 of 3-1/2 x 20 drill pipe
Price: $330,000 OFF MARKET
INGERSOLL RAND T3 (Ref#5732Na) Manufactured 1999, Cat 3406 deck engine, mounted on International Navistar 2674 6x4 with Cat C13 engine, standard mast & pullback, 900/350 air compressor, no mud, 6 rod carousel, single rod loader, line oiler, Cat 25gpm water injection, 4 hydraulic leveling jacks, 400 of 4 ½ x 20 drill pipe (2 7/8 IF conn), no tools Price: $255,000
INGERSOLL RAND T3W
(Ref#308N) Manufactured 1999,
900/350 air compressor, Cat deck engine, mounted on International tandem axle
truck with diesel engine, air brakes, standard mast and pullback, Bean 18 gpm
water injection pump, Mission 4 x 3 centrifugal pumps, 4 hydraulic leveling
jacks, heavy hoist winch, 7 rod carousel, hammer oiler, rod loader, rod racks,
hydraulic welder, 400 of 3-1/2 x 20 drill pipe, table bushings, handling
tools, one owner rig, excellent condition, well maintained Price:
$375,000 PRICE REDUCED: $350,000
INGERSOLL RAND T3W (Ref#924Na) Manufactured 1998, extended mast, Cat 3406 deck engine 0 hours since overhaul, mounted on 1998 Mack with 350hp Mack diesel engine, 900/350 air compressor, 18000# winch, (5x6 GD mud pump available) bailing drum, water injection, hydraulic leveling jacks, new tires, set up for 4 ½, no pipe available Price: $200,000
INGERSOLL RAND T3W (Ref#2088N) Manufactured 1997, 900/350 air compressor (6000 hours), Cat 3406 deck engine, mounted on tandem axle International truck with 310 diesel engine, water injection pump, carousel, 800 of 4-1/2 rod Price: $270,000
INGERSOLL RAND T3W (Ref#9389) Manufactured 1997, 900/350 air compressor, Cat 3406 (465 hp) deck engine, 38 mast, rotary head, 8000 ft/lb torque, 30,000# pullback, 18,000# drawworks hoist, jhib boom, sandreel, DHD lube, 25 gpm water injection Cat piston pump, torque limit control, power pack clutch 2800 hrs, mounted on Ford LNT 9000 w/ Cat 365 hp engine Price: $295,000
INGERSOLL RAND T3W
(Ref#8029Na) Manufactured 1996,
long tower with 1321 Welco Beales casing hammer, Cat 3406 deck engine, 900/350
air compressor, main hoist, sandreel, mounted on Ford L9000 with Cat engine,
Mission 4x3 centrifugal pump, Miller Bobcat welder, 10000 watt generator, casing
hammer hoist, casing hoist & deadman hoist Price: $350,000
PRICE REDUCED: $250,000
INGERSOLL RAND T3 (Ref#9068) Manufacturing 1996, 1630 hours (excellent), 900/350 air compressor, mounted on Ford LNT9000 w/9500 miles, Cat 3406 diesel engine, 26,500# pullback, 30,000# pulldown, uses 4-1/2 x 20 pipe, Wilden M15 pump, located South America Price: $300,000
INGERSOLL RAND T3W
(Ref#6130N) Manufactured 1995, long
tower, 825/350 air compressor, Cat diesel on deck, 5 x 6 Gardner Denvermud pump,
mounted on International 5000 truck with Detroit diesel engine, water injection,
hammer oiler, carousel, 4 hyd jacks, rod box, 300 pipe Price:
$275,000 OFF MARKET
INGERSOLL RAND T3W
(Ref#9178N) Manufactured 1995, Cat
deck engine, mounted on International Paystar 5000, 900/350 air compressor, 4x5
centrifugal mud pump, 18000# winch, 18gpm water injection, set up for 3 ½ drill
pipe (1200 avail-neg $$) Price: $250,000 PRICE REDUCED:
$230,000
INGERSOLL RAND T3W (Ref#1122N) Manufactured 1995, 900/350 clutch air compressor (rebuilt), Cat 3406 (rebuilt), 32,500# pullback, high torque head, 18,000# winch, 3000# aux winch, long tower, mounted on 1995 Paystar 5000, sandblasted, repainted, very good condition Price on Request
INGERSOLL RAND T3W (Ref#10270) Manufactured 1995, Remanufactured 2002, 2400 hours since reworked, 900/350 IR air compressor, 3406 Cat diesel engine, new air compressor, new deck engine, 32,500# pullback heavy duty mast, high torque head, single rod loader, 7 rod carousel, rod rack, hammer oiler, water injection, 12,000# winch, mounted on Ford L9000 with 3176 (365 hp) Cat engine, (2000 miles), Jake brake, air ride seat, all rear end pull, hydraulic table, 4 hydraulic leveling jacks, 14,000 miles, cruise control, rig completely rebuilt and painted by IR. Rebuilt rotary head, new cable, new air hoses, discharge hose, new lube, work platform rebuilt, new slips, 320 of 4-1/2 x 20 drill pipe (like new), new 6 hammer and 6 bit, new tires, excellent condition. Price: $320,000
INGERSOLL RAND T3 (Ref#705N) Manufactured 1995, mounted on Ford truck, 300 pipe Price: $195,000
INGERSOLL RAND T3W (Ref#1717Na) Manufactured 1994, 900/350 air compressor, Cat deck engine, 37 derrick, mounted on 1993 International Paystar truck with Cummins engine, 7 rod carousel, 32,000# pullback, 18,000# winch, 18 gpm Bean water injection, single rod loader, 4 hydraulic levelng jacks, 400 of 4-1/2 x 20 drill pipe, all tools, drills daily Price: $275,000 PRICE REDUCED: $180,000 Casing hammer at additional cost.
1991 GMC WATER TRUCK (Ref#1717Nb) Flatwater Fleet stle 1400 gallon water tank, 225 gal fuel tank, tandem axle, Cat 3106 (275 hp) engine, 3000# crane Price: $50,000
INGERSOLL RAND T3W (Ref#15229) Manufactured 1994, 900/350 air compressor, Cat 3406 engine (rebuilt 2000), standard derrick, 12k winch, single rod loader, many new components, mounted on Ford L9000 truck with Cat 3406 (350 hp) Price: $240,000
INGERSOLL RAND T3W (Ref#9035N) Manufactured 1993, Cat 3406B deck engine, mounted on International F2476 with Cat 3176 engine, 900/300 air compressor, 26500# pullback, 12000# winch, 49gpm aux, hydraulic system to run off board mud pump, 7 rod carousel, single rod loader, Rauch pipe spinner, night lights, 400 of 4 ½ drill pipe Price: $205,000
INGERSOLL RAND T3 (Ref#5339N) Manufactured 1993, Cat deck engine, mounted on 93 Ford L9000 with Cummins engine, 900/350 air compressor, standard mast & pullback, Bean water injection, hammer oiler, 6 rod carousel, rod box, 4 hydraulic leveling jacks, 400 of 3 ½ x 20 drill pipe Price: $180,000
INGERSOLL RAND T3
(Ref#2108Na) Manufactured 1993,
900/350 compressor, (4x5 mud pump avail, not mounted on rig), new Cat 3406 deck
engine, mounted on 1993 International with Cummins diesel engine, extended mast
for casing hammer, Bean water injection, Lincoln welder, 100 of 4 1/.2 IF x
20 drill pipe, 6 8 & 10 Hammers, Fully tooled, currently drilling
Price: $280,000 OFF MARKET
INGERSOLL RAND T3W (Ref#7600N) Manufactured 1993, 900/350 air compressor, Cat 3406 diesel engine (rebuilt w/6000 hours), 38 mast, 30,000# pullback, mounted on Mack truck with DM690 Mack diesel engine, 20 gpm Cat water injection pump, hammer oiler, 2000# wireline winch, 12,000# Braden main winch, 4 hydraulic leveling jacks, to be set up for 4-1/2 drill pipe, hydraulic wrench, all necessary handling tools, currently drilling Price: $175,000
INGERSOLL RAND T3W (Ref#6142Na) Manufactured 1992, Cummins NTL855 deck engine, recently rebuilt, mounted on International 5070 with Cummins L14 engine, 825/350 air compressor, 38 derrick, Welco Beales casing hammer, Cat 12gpm water injection, 6 rod carousel, rod box Price: $270,000
INGERSOLL RAND T3W (Ref#358N) Manufactured 1992, 900/350 air compressor, Cat diesel deck engine (recently overhauled), mounted on International truck, hydraulic system overhauled, 35,000# pullback, inside 7 rod carousel, standard mast, 18 gpm Bean water injection pump, 700 of rod, fully tooled Price on Request
INGERSOLL RAND T3W (Ref#1141N) Manufactured 1991, 825/350 GHH air compressor, 5 x 6 Gardner Denver mud pump, standard pullback, Cummins N14 diesel deck engine (reconditioned 2005), set up for 4-1/2 x 20 drill pipe, 10 gpm Bean water injection, spare Cat 25 gpm water injection (needs rebuild), jib boom, sandline, mounted on 1991 International Paystar with 855 Cummins diesel (300 hp) engine, and Eaton Fuller 8-speed transmission, currently drilling Price: $185,000
INGERSOLL RAND T3W (Ref#793R) Manufactured 1990, 825/350 air compressor, Cummins diesel deck engine, mounted on Ford truck with diesel engine, hammer oiler, water injection, rod box, no mud pump.
1989 Ford L9000 water truck, 1600 gal steel flat tank, 350 Cummins engine
1,000 of 4-1/2 x 20 drill pipe (2-7/8 IF Connections)
Elevators, subs, handling tools
Package Price: $155,000
INGERSOLL RAND T3W (Ref#4937N) Manufactured 1990, 825/350 Ingersoll Rand air compressor, 5 x 8 Gardner Denver mud pump, Cummins KTA855 on deck, 10 gpm Bean injection pump, 25 gpm Cat injection pump, rod carousel, mounted on Paystar 5000 with Cummins 855 engine, 4 hydraulic jacks, drilling daily Price: $190,000
600 of 4-1/2 x 20 pipe, 6 hammer (1 year old), 8 hammer (less than 1 year old), 5 hammer (less than 1 year old)
Package Price: $235,000
INGERSOLL RAND T3W (Ref#1353N) Manufactured 1989, 825/350 air compressor (rebuilt 3 years ago), 5-12 x 10 mud pump, 855 Cummins deck engine (rebuilt 3 years ag), mounted on Ford 8000 truck with Ford diesel engine, rod box, 1 carousel, apporx 800 of 4-1/2 drill pipe, 8 hammer, good shape, gone through Price: $160,000
INGERSOLL RAND T3 (Ref#8307N) Manufactured 1989, 825/350 air compressor, 855 Cummins deck engine, mounted on International F1900 truck, Bean 8 gpm water injection, 9 rod carousel, standard mast and pullback, 500 drill pipe Price: $175,000
Hammers and stabilizer availabe at extra cost
INGERSOLL RAND T3W
(Ref#593N) Manufactured 1989,
mounted on International, 825/350 air compressor, 9 rod carousel, air wrench,
automatic oiler, 18 gpm Bean water injection, good condition Price:
$185,000 PRICE REDUCED: $165,000
INGERSOLL RAND T3 (Ref#8906N) Manufactured 1989, 825/350 air compressor, Cummins deck engine, mounted on 1989 Ford 9000 truck with Cummins engine, 7 rod carousel, Bean 35 gpm water injection pump, standard mast and pullback, line oiler, 4 hydraulic leveling jacks, 7 jts of 4-1/2 x 20 (3-1/2 Reg) drill pipe, good condition, 5 x 10 mud pump on Military trailer (hydraulically driven), currently drilling Price: $145,000
INGERSOLL RAND T3 (Ref#2493Na) Manufactured 1988, 450 Cummins deck engine, mounted on 87 International with DT466 engine, 825/350 air compressor, diaphragm mud pump, standard mast & pullback, 7 rod carousel, water injection, rod box, 4 hydraulic leveling jacks, 18 stabilizer, bits, subs, etc, Mincon hammer (like new), 800 of 4 /12 x 20 drill pipe (2 7/8 conn), currently drilling Price: $120,000
INGERSOLL RAND T3W (Ref#2263N) Manufactured 1988, 850/350 air compressor, Cummins 855 deck engine (rebuilt with 6000 hours), mounted on 1988 Ford L9000 truck, 200 of 4-1/2 x 20 drill pipe, compressor rebearing POR
INGERSOLL RAND T3 (Ref#7872N) Manufactured 1988, 825/350 air compressor, Cummins engine on deck, 32 mast, 12,000# winch, 12 gpm Cat injection, pump, mounted on Ford 8000 truck with 300 hp engine, Welco Beales pump, 380-420 of 4-1/2 drill pipe, rod box, new tires Price: $160,000
1980 Kenworth water truck with flat tank at extra cost
INGERSOLL RAND T3W (Ref#640N) Manufactured 1988, 850/350 air compressor, 400 Cummins deck engine, mounted on Ford 9000 tandem axle truck with diesel engine, standard mast and pullback, Bean water injection, 4 hydraulic leveling jacks, drills daily, good condition, no pipe or tools Price on Request
INGERSOLL RAND T3W (Ref#1027N) Manufactured 1988, 850/350 air compressor, Cummins 855 deck engine, mounted on International 2500 truck with DT466 engine, 18 gpm Cat water injection, 7 rod carousel, 260 of Ingersoll Rand 4-1/2 drill pipe, 120 of 4-1/2 Schramm pipe, good running condition Price: $220,000
INGERSOLL RAND T3W (Ref#2226N) Manufactured 1988, 825/350 air compressor, Cummins deck engine (new 2001 with 4000 hours), mounted on 1998 6 x 4 Volvo FL6-26 truck with 250 hp engine, 420 of 4-1/2 drill pipe, new compressor oil cooler (2008), (4) new top head motors (2007), new rotation pump and main hoist (2006), located Europe Price: 125,000 (Euros)
INGERSOLL RAND T3W (Ref#5004N) Manufactured 1987, 825/350 air compressor, Rebuilt NTA 855 Cummins deck engine, mounted on International F1954 truck with DT466 engine, 9 gpm Bean water injection pump, carousel, jib boom, standard mast and pullback, rod box, 4 hyd leveling jacks, 400 of 4-1/2 x 20 pipe, 6 hammer, good condition, currently drilling Price: $140,000
INGERSOLL RAND T3W (Ref#1650N) Manufactured 1987, 825/350 air compressor, 855 Cummins deck engine, mounted on International truck with L10 Cummins, 32 mast, Cat 20 gpm water injection, rebuilt engine and rams in 2003, standard pullback, 300 pipe Price: $180,000
INGERSOLL RAND T3 (Ref#2341N) Manufactured 1987, new 825/350 air compressor (less than 100 hours), new Cummins NTA855 deck engine (less than 100 hours), mounted on International 1900 Series truck w/DT466 diesel engine, 18 gpm Bean water injection pump, standard mast and pullback, hammer, stabilizer, 4 hydraulic leveling jacks, 380 of 4-1/2 x 20 drill pipe, good condition, currently drilling Off Market
INGERSOLL RAND T3 (Ref#3949) Manufactured 1987 - located Europe, 4500 hours, 825/350 IR compressor, Cummins 450 diesel engine, 7 rod carousel, rod box, 300 4-1/2 pipe, Mounted on International 1900 truck with DT460 diesel engine, handling tools, table bushings Price: $220,000
INGERSOLL RAND T3
(Ref#4779N) Manufactured 1976,
Cummins deck engine, mounted on crane carrier with Cummins engine, 750/200 air
compressor, line oiler, water injection, 1 front & 2 rear hydraulic leveling
jacks, 200 pipe, 6 hammer & bit Price: $60,000 OFF MARKET
INGERSOLL RAND T3
(Ref#1666N)
Manufactured 1976, 750/300 air compressor, Cat 903 deck engine, 18 gpm Bean
pump, mounted on Crane Carrier, 225 pipe, fully tooled
Price:
$50,000 PRICE REDUCED: $40,000
INGERSOLL RAND T3 (Ref#1669N) Manufactured 1973, 750/300 air compressor, Cat deck engine, 18 gpm Bean pump, mounted on Crane Carrier (engine blown), 225 drill pipe, fully tooled, parts rig Price on Request
PACKAGE PRICE FOR BOTH 1666N AND 1669N $60,000
INGERSOLL RAND T3 (Ref#4000) Manufactured 1973, 600/100 air compressor, 6V71 Detroit diesel on deck, 2 carousels, hammer oiler, water injection, Mounted on Crane Carrier with 501 gas, 3 hydraulic leveling jacks, 20000# pullback Price: $37,000
INGERSOLL RAND T3
(Ref#4778N) Manufactured 1968,
rebuilt Detroit 8V71 deck engine, mounted on crane carrier with an in-line 6 gas
engine, standard mast & pullback, 900/150 air compressor, 8 rod carousel, line
oiler, water injection, single rod loader, 1 front & 2 rear hydraulic leveling
jacks, 25 x 4 drill pipe, fully tooled Price: $40,000
OFF MARKET
INGERSOLL RAND T3 (Ref#7436) Manufactured 1968, converted to hydraulic, 600/150 air compressor, 4 rod carousel, mounted on 1956 International truck, 671 Detroit diesel engine, Price: $25,500
INGERSOLL RAND T3 (Ref#11592) Manufactured 1966, 8V71 Detroit diesel deck engine, 900/150 air compressor, mounted on Crane Carrier with gas engine, 6 rod carousel, air operated water injection, standard mast, 200 of 25 rods, handling tools, good condition Price: $37,500
INGERSOLL RAND T3 (Ref#535N) Manufactured 1963, 600/125 air compressor, mounted on Crane Carrier with 450 gas iengine, 671 Detroit diesel on deck, 225 pipe, hammer, 6 bits, 6 gpm Bean pump, Price: $22,500
INGERSOLL RAND T2W (Ref#7773Na) Manufactired 2001, 400/200 IR screw compressor, 3 x 4 Magnum centrifugal mud pump, 12,000# hydraulic powered main hoist, hydraulic swing and extend for main hoist, dual hoist and jib controls, 4,00# uax hydraulic winch, outside carousel holds 9 3-1/2 x 20 drill rods, pipe rack, 9 gpm water injection, 3L4 Moyno pump hydraulic driven, mounted on International, complete & ready to go Price: $275,000
INGERSOLL RAND T2W (Ref#14551) Manufactured 2000, 1080/350 air compressor, Centerline 7-1/2 x 10 mud pump hydraulic driven, 60,000# pullback, mounted on 2000 International 5000 truck with C15 Cat engine, PTO, 35 gpm Cat water injection, 3 carousels (7, 4-1/2, 3-1/2), swing jib, swivel, 4 hydraulic leveling jacks, breakout wrench, rod spinner, 300 of 4-1/2 x 20 drill pipe, tools Price: $450,000
INGERSOLL RAND T2W (Ref#1867N) Manufactured 1995, 750/350 HR2 air compressor, 3 x 4 Mission mud pump, mounted on International tandem axle truck, Cummins N14 engine Price: $165,000
INGERSOLL RAND T2W
(Ref#1876N) Manufactured 1992, rack
and pinion pulldown, 2 hydraulic motors on head 2000 ft/lb torque, 3 x 4 Mission
Magnum pump, mounted on GMC tandem axle Top Kick truck with Cat 3116 diesel
engine, PTO, portable mud pit Price: $125,000 PRICE
REDUCED: $100,000
Available at extra cost: 400 of 4-1/2 x 20 drill pipe
INGERSOLL RAND TRUCM3 (Ref#3063N) Manufactured 1970s, mounted on Crane Carrier, 750/150 air compressor, 318 V8 Detroit deck engine, needs new carrier engine, (3) sticks of 4 x 3-1/2 thread pipe, rig needs some TLC but can be put into good condition Price: $22,000
INGERSOLL RAND TRUCM (Ref#14791) 600/100 air compressor, 6V71 Detroit deck engine, mounted on Ford truck with gas engine, bits, subs, hammer, 100 of 3-1/2 drill pipe Price: $22,500
Tel: 516-536-7375 Fax: 516-536-7317 rigs@sunmachinery.com