SUN MACHINERY CORP.
Call: 516-536-7375 / 516-536-7317 fax
Midway - 1500, 1300, 1250, 1000, 15M, 13M
MIDWAY 3500 (Ref#186N) Triple drum drawworks with air clutches, Manufactured 1982, 60’ x 150,000# hydraulically raised mast, Mounted on 4 axle carrier w/ 350hp Cummins diesel engine, 5 hydraulic leveling jacks, 18” rotary table, Hydraulic pulldown system available and not installed, Fold down walkways, Explosion proof derrick lights, Rebuilt 2006 at a cost of $500,000, Never used Price: $675,000
MIDWAY 3500 (Ref#2199N) Double drum, Lebus Grooved drums for ¾” cable, mounted on 4 axle Crane Carrier with Cummins NTTC 400hp engine and Allison transmission, 3” King watercourse 50 ton swivel, (3) sheave McKissick 35 ton blocks and hooks, 4-1/4” x 36’ square kelly with Varco HD drive bushing, 17-1/2” Howard Turner rotary table, Martin Decker Clipper weight indicator, 3” rotaryhose, 4” standpipe Price: $375,000
MIDWAY 2500M (Ref#6502Rb) Manufactured 1978, 60’ mast, mounted on CCC with rebuilt engine, 18” Howard Turner table & swivel, new 41’ x 5 ¼” Kelly & bushing, new hydraulic system, completely refurbished Price: $410,000
MIDWAY 1500 (Ref#359Na) Manufactured 1988, mounted on 1988 International 2500 with Detroit 8V92 T engine, Midway M44 drawworks, 5 ½ x 8 GD mud pump, 8” retractable table, 3 ¾” x 24’ Kelly, 3 drums, 54’3” square tubing derrick with racking board and a 14’ bolt on extension pipe rack, hydraulic pulldown, breakout tongs & spinning chain, air clutches, 4 hydraulic leveling jacks Price: $145,000
Pipe available at extra cost
MIDWAY 1500HD (Ref#2038N) Manufactured 1980, 54’ derrick with racking board, mounted on 1980 Ford tandem axle truck with Cummins 350 hp diesel engine, 4 leveling jacks, 5 x 8 mud pump, 7-1/2” retractable table, air clutch, chain pulldown, tools, wrenches, handling tools, currently drilling, includes Volvo pipe truck and 1700’ of 2-7/8 IF x 20’ drill pipe, doghouse with geolograph, Price: $325,000
MIDWAY 1500 (Ref#359Nb) Manufactured 1979, mounted on 1979 International Paystar 5000 with 350 Cummins Big Cam engine, 5 ½ x 8 GD mud pump, 8” retractable table, 4 ½” x 24’ Kelly, 3 drums, 54’ 3-1/2” square tubing derrick with racking board, pipe rack, hydraulic pulldown, breakout tongs & spinning chain, air clutches, 4 hydraulic leveling jacks Price: $130,000
Pipe available at extra cost
MIDWAY 1500 (Ref#7836N) Manufactured 1979, 8500 hours, mounted on Ford 9000 with Detroit 8V71, only 3100 hours on overhaul, 6x6 Wheatley pump, Leroi 253S2 air compressor, 45’ mast, double six line blcok, 4 ¾” hex Kelly, new 3” western swivel, 10” Gardner Denver table Price rig only: $170,000
Also available as a package with ’93 International mud system, drill collars, drill pipe, tools, etc
Package Price: $225,000
MIDWAY 1500 (Ref#14522N) Manufactured 1978, double drum drawworks, mounted on Kenworth truck with 450 Cummins diesel engine, 8-1/2” rotary table with 5 speed transmission, 52’ hydraulically raised mast with pipe racking board for double 20’s, 750/200 CP screw compressor and booster mounted on deck, (2) 30 ton 2-sheave blocks, 4-1/4” round fluted kelly mist pump Price: $110,000
MIDWAY 1500 (Ref#4388) Manufactured 1978, Triple drum drawworks (new 1990) with air clutches, Mounted on 4 axle CC with 350 Cummins engine (rebuilt) , 3” piping, 5-1/2 x 8 GD duplex mud pump, 52’ x 100,000# hydraulically raised mast, 5” x 37’ square kelly, 30’ pipe rack, hook/block (2) sets 25 ton, new bearing in rotary table, leveling jacks and raising cylinder repacked, spent $55,000 in repairs in past 5 years Off market
MIDWAY 1500
(Ref#5407) Manufactured 1977, Model
D1500WM39, 42’ mast, hydraulic drive, 8” rotary table, hydraulic chain pulldown,
Gardner Denver 5-1/2 x 8” mud pump, LeRoi 256S2 450/250 compressor, 5-1/2’ slim
hole to 1800’ or 7-1/2” hole to 600’ depth capacity, 2 winches, 2 rear hydraulic
outriggers, rear operator hydraulic controls, 1100’ of 20’ pipe rack capacity,
Mounted on 1977 Ford 9000 tandem axle cab and chassis w/290 Cummins diesel,
recent out-of-frame rebuild, 5/4 transmission, 254” WB, 58,000# GVW (44,000#
rear), Hendrickson suspension, 11.00 x 24 tires on Budd wheels, dual saddle
tanks, tool boxes, overall good condition Price: $285,000
PRICE REDUCED FOR QUICK SALE: $185,000
MIDWAY 1500 (Ref#5085) Manufactured 1976 - Double Drum, 5 x 6 mud pump (1 year old), 8” rotary table, air clutch, PTO, 450/250 LeRoie compressor, 4 leveling jacks, new transfer box, Mounted on Ford L9000 with Detroit 8V92, 38’ mast, 3” fluted kelly Off Market
MIDWAY 1300
(Ref#4417) Manufactured 1975, 5 x 6
mud pump, 100S LeRoi compressor, mounted on 1995 International truck with 60
Series engine, 3-5/16” kelly, 7-1/2” fixed table, drill pipe Price:
$105,000 OFF MARKET
MIDWAY 1300 (Ref#3054N) Manufactured 1980, one owner/operator, 5 x 6 mud pump, 100 SDS LeRoi air compressor, mounted on 1980 Ford LT9000 tandem axle truck with 6V71 Detroit engine, 8-1/2” retractable table, 4” x 25’ kelly, mechanical clutches, pulldown, 2 rear hydraulic leveling jacks, 400’ of 2-7/8” x 20’ pipe, some tools, excellent condition Price: $120,000
MIDWAY (Ref#12660N) Rebuilt 2001, 1250 air clutched drawworks, 7-1/2” 2000 rotary table with 5 speed transmission, 4 speed hydraulic pulldown, 2 hydraulic leveling jacks, pipe rack with slide, mounted on tandem axle Mack truck Price: $120,000
MIDWAY 1000 (Ref#15070) Manufactured 1973, 5 x 6 mud pump, 580 air comressor, mechanical pulldown, mechanical clutches, pipe rack, 7-1/2” retractable table, 26’ kelly, mounted on 1973 Ford tandem axle truck, 4 jacks, new Cat engine, 300’ of 3-1/2” x 15’ drill rod, good condition, stored inside Price: $90,000
MIDWAY 15M (Ref#4372N) 1978 Autocar with 290 Cummins engine, 13 speed Fuller transmission, 4 speed drawworks transmission, 4 speed Spicer rotary table tyransmission, 57’ x 60,000# hydraulically raised mast, Gardner Denver FXX 5-1/2 x 8 mud pump with 4 x 5 Mission centrifugal supercharger, 12” 12KRT Midway rotary table retractable, Midway 34M double drum drawworks with 5/8” Lebus grooving, Martin Decker weight indicator, 3” ID heavy duty Little Giant Swivel, 36’ x 3-1/2” square kelly, 3” kelly hose, 4” standpipe with Demco valve (mud), 6” standpipe (jet) and 2” standpipe (air), 8” suction manifold to both sides of rig, (2) S80 3-sheave 30 ton traveling blocks, (2) BJ type LF tongs, (2) hydraulic winches with ½” line, hydraulic spinning chain, hydraulic makeup and breakout cylinders, hydraulic wireline unit, large folding rig floor, (4) hydraulic leveling jacks, laydown system with trolley, junk box, folding pipe racks,unitized on tandem trailer, Tri-flo 200 bbl mud system with 4 x 5 shale shaker, 8 cone desander with 2 x 3 shaker and (2) 4 x 6 Halco centrifugal pumps unitized on tandem axle drop deck, doghouse and fuel tank unitized on tandem axle Sure-Pull gooseneck trailer
Package Price:
$630,000 OFF MARKET
MIDWAY 15 (Ref#924Nb) Manufactured 1977, PTO, mounted on 1977 Ford with 3406 Cat engine, 8 ½” retractable table, 5 ½ x 8 mud pump (5 ½ x 10 available) with new expendables, 256 Leroi air compressor, pulldown, air clutches, 4 hydraulic leveling jacks, breakout tongs, 3” square tubed mast, no pipe Price: $170,000
MIDWAY 15M (Ref#1184N) Manufactured 1977, 580/50 psi air compressor, mounted on 1976 Ford 8000 tandem axle truck, 3208 Cat engine, PTO, extended 55’ x 60,000# mast, 8-1/2” retractable table, 5” x 29’ kelly, no pulldown, air clutches, breakout tong, water injection, 3 winches, 5 x 6 mud pump (removed from rig), drawworks needs work drum on left side is locked in place, ½” low pressure rubber air lines need replacing Price: $45,000
MIDWAY 13M (Ref#9423Nb) 1250 drawworks, manufactured 1981, PTO, mounted on 1994 Peterbilt, 3x4 centrifugal mud pump, 256 Leroi air compressor, 8” retractable table, Bean water injection, hydraulic pulldown, 300’ drill pipe, 4 hydraulic leveling jacks, some tools Price: $95,000
MIDWAY 13M (Ref#9080Na) Manufactured 1979, PTO, mounted on 1993 International with 400 Cummins engine, (2) 5x6 mud pumps, 8 ½” stationary table, 4” Kelly, mechanical clutches, pulldown (needs new chains), no breakout wrench, pipe rack, 2 rear hydraulic leveling jacks, 300’ of 20’ x 2 7/8” IF drill pipe
1993 INTERNATIONAL WATER TRUCK (Ref#9080Nb) 3200 gallon tank, 400 Cummins engine
Package Price: $150,000
MIDWAY 13M (Ref#1816N) Manufactured late 1970’s, PTO, mounted on 1996 Peterbilt with 300 Cummins engine, Halco 3x4 mud pump, GD WEK air compressor, water injection, 8 ½” DSM retractable table, 24’ Kelly, manual clutches, 2 speed hydraulic pulldown, 300’ of 2 7/8” pipe, 4 hydraulic leveling jacks, good condition, currently drilling Price: $110,000
MIDWAY 13M (Ref#5387N) Manufactured 1970’s, mounted on 1980 International tandem axle truck, 671 Detroit diesel, 13 speed transmission, 7-1/2 x 10” gaso pump, stationary table, tools, 560’ of 2-3/8 packer pipe (brand new),
1997 FORD LOPRO F-800 Cummins 240 hp engine, 6 speed transmission, 20’ bed, 2000 gallon poly tank, single axle
Package Price: $80,000
Tel: 516-536-7375 Fax: 516-536-7317 rigs@sunmachinery.com