WORKOVER RIGS / DRILLING RIGS

 

IDECO H35 WORKOVER RIG  (Ref#9500Ra) 

       

1982, single drum (input shaft could be modified for sandline), brakes 42” x 30”, 96’ x 215,000# Ideco hydraulically raised mast, 6 lines, racking board, rod hoist, guide wires, hydraulic hoist, tongs, weight indicator, block, elevator links, Mounted on 4 axle carrier with Detroit 8V71 diesel engine, Allison 750 transmission,  ready for use, Located Texas  Price:  $325,000

SKYTOP 400 WORKOVER RIG  (Ref#9500Rb) 

1980, 475 hp, single drum (new), reworked, 96’ x 205,000# hydraulically raised mast, 6 lines,  crown block: 3 new sheaves blocks and bearings, racking board, guide wires, (2) hydraulic hoist, weight indicator, block, elevator links, fall safety device, work platform, mounted on 4 axle carrier with Detroit Series 60 diesel engine, Allison transmission, rig in excellent condition and has been well maintained, ready for use, Located Texas  Price:  $425,000

MOELLER DD  (Ref#9500Rc) 

1980, 475 hp, double drum, new drum chain, 96’ x 205,000# Pemco hydraulically raised mast, 6 lines, 4 sheave crown,  mounted on 5 axle carrier, Detroit Series 60 diesel engine, Allison 5860 transmission (rebuilt), racking board, guide wires, (2) hydrauulic hoist, weight indicator, block, elevator links, fall safety device, work platform, rig is in excellent condition, well maintained,  ready for use, Located Texas  Price:  $495,000

MOELLER DD  (Ref#9500Rd) 

1980, 425 hp, double drum, 96’ x 205,000# Pemco hydraulically rasied mast, 6 lines, Crown: 4 sheaves “block” / sheave utility, mounted on 5 axle carrier with Detroit 60 Series engine, Allison 750 transmission, racking board, guide wires, hydraulic hoist, work platform, company spent $300,000 to rebuild, Located Texas    Price:  $535,000 – GOOD VALUE!!

TAYLOR 400 WORKOVER RIG  (Ref#4022R) 

   

Manufactured 1982, double drum, main drum 42 x 12, 1” Lebus grooved, Hydratarder brake, 96’ x 180,000# Pemco mast with tubing board and rod basket, mounted on 4 axle carrier (front axle 20,000#, rear axle 24,000# rating), p/b 8V71 Detroit diesel engine, Allison transmission, overal rig weight 95,000#, (2) 125 gallon fuel tanks, (2) op side under deck tool boxes, 3” x 40’ mudline on mast, stand up toolbox rear deck, extended block cradle, 3-sheave 100 ton block.  Located Oklahoma  Price:  $280,000

TAYLOR BIG-T WORKOVER RIG  (Ref#4446R) 

   

Manufactured 1985, double drum, main drum 42 x 12, 1” Lebus grooved, 96’ x 180,000# Pemco mast with tubing board and rod basket, mounted on 4 axle carrier (20,000# front axle, 25,000# rear axle rating), p/bDetroit 8V71 diesel engine, Allison transmission, overall rig weight 90,000#, tools and support equipment: Op side storage under deck, Op side toolbox under deck, rear sill rack under deck, 125 gallon fuel tank, Off Op side toolbox under deck, hydraulic winchmast base mounted, 3-sheave 75 ton block.  Located Oklahoma  Price:  $455,000  PRICE REDUCED:  $285,000

IDECO H25  (Ref#350N) 

         

Double drum, Parkersburg Hydromatic brake 22” BC, Kelco catheads, maximum depth 6,000’, main drawworks 38” x 8”, 7” Lebux grooved, 5/8” wireline, sandline 32” x 8”, 9/16” wire line, 4” standpipe, 3-1/2” rotary hose, 96’ x 205,000# Pemco telescoping and scoped mast with racking board, drive on ramp 9’W x 54’L, working floor 16’ x 10’H x 12’L with V door and catwalk, kelly and swivel 5-1/4” hex x 38’ long with hydraulic spinner, 17-1/2” Brewster rotary table, mounted on tandem axle trailer 42’L x 12’W with 4 leveling jacks, Detroit Series 60 diesel engine 425 hp, Fuller 7 speed manual transmission, 75 ton Gray Tool swivel, McKissick 100 ton block w/Hydra Hook 3-sheave (6 line) 7/8” drill wire,  6,000# hydraulic winch, located Utah  Price:  $300,000

COOPER LTO-550 DRILLING RIG  (Ref#7388R) 

       

Single drum, manufactured 1979, 8,000’ depth capacity, Pemco 112’ x 300,000# hydraulically raised mast with racking board, tong counter weight, 45,000# single line pull with 1-1/8” drill line, Hydromatic brake 22”, auxilary 5000# hydraulic winch, Detroit 60 Series Tier I 630 hp engine, Allison CLT-750 transmission, substructure telescoping, workfloor 12’ tall with 10’ clearance below rotary table, 24’ wide x 20’ long.  3-piece drive on ramp 45’ long x 9’ wide x 12’ high V Door, catwalk, 17-1/2” National rotary table w/chain drive, 5-1/4” x 4” hex kelly with 5” standpipe and manifold, 150 ton 4-sheave 1-1/8” line Skytop Brewster block, mounted on 5 axle carrier with 4 hydraulic leveling jacks, breakout and make up cylinder, weight indicator, torque gauge, and rig lights.  Located Utah  Price:  $450,000

CARDWELL KB-210  (Ref#41R) 

     

Completely rebuilt, double drum, swab rig, rebuilt Allison 740 transmission, new brakes, hoses, new chains, new hydraulics and hydraulic lines, new winch, Detroit diesel, 6V71, 50 ton rebuilt block, 80’ x 150,000# rebuilt mast, mounted on 991 Autocar with Cat 3306, good condition, painted, ready to work, located in Venezuela and Nacionalizado  Price:  $600,000

PRICE REDUCED:  $420,000

WICHTEX   (Ref#4226R) 

Manufactured 1968, 6 cyl Chevy deck engine, double drum drawworks, 36’ hyd extension, mounted on 1968 GMC truck with 427 engine, 2 rear leveling jacks  Price:  $19,500