WALKER-NEER Tophead Rig 250-50 (Ref# 11963N)
Manufactured in 1981
Cat 3406 diesel engine
63 H, 250,000# one piece hydraulically raised mast
Dual 3-Stage raising rams
Mast modified to slide back in down position for easier moving
Top head drive with 9270 ft/lbs torque
50,000# chain pull down
Mounted on tri-axle trailer with 4 hydraulic leveling jacks
WALKER-NEER hydraulic pipe handling boom
with set (2) of 22 L hydraulic pipe racks
8 4W x 12 H x 50 L back on ramp
Powered by Cat 3406 diesel engine
with air starter on oilfield skid.
Joy WB-12 Booster
Powered by Cat 3406
with air starter, radiator,
gauges, heat exchanger on oilfield skid
Input 2100 CFM/125 PSI
Oilfield 2100 CFM/800 PSI
7 7W x 30L Doghouse with 5L covered porch on each end
Knowledge box, bench storage
Steel worktable with vise, parts cabinets (4) lockers, (2) space heaters
MARATHON 40KW AC gen set
Powered by JOHN DEERE 4-cylinder diesel engine
Mounted on 1979 FRUEHAUF 40L Trailer with tri-axle
(2) 7W x 7H x 10L 3600 gallon fuel tanks
14 6 breezeway between tanks
MYERS C-20 triplex mud pump
2-comp soap, mounted on FRUEHAUF 40L trailer
7 8W x 7 6H x 40L 400 bbl, Water tank on oilfield skid
Support Equipment:
Tandem, axle dolly with RT 5th wheel JEEP BOP Regan 11 x 3000# annular
7W x 26H x 35L junk box Regan 8 5/8 x 2000/3000 annular
WILSON 7 SD casing elevator Washington 8-1/4 rotating head with air bowl
10 Ύ SD casing elevator with 9 5/8 reducer Washington 5 rotating head with air bowl
KING OIL TOOLS 4-1/2 SS elevator
(2) sets of slips
All fuel lines and blow line to pit 5 ½ steel unions to pit
Several subs for various pipe combinations
Includes all equipment necessary to drill less tubulars
Price: $750,000
WILSON MOGUL 42 DOUBLE DRILLING RIG (Ref#495N)
Manufactured 1978
Draw Works:
- Single Drum Draw Works
- Foster Model 27 AH break out Cat heads (serial # 1404)
- Manual Braking System
- 1,500 1 drilling line, spooled, never used, still in protective coating
- Drillers console, with controls
Power:
- Detroit Model 12V71 diesel engine
- Engine rated for 550 peak Horse Power
- Radiator and Electric starter
- Allison Model TC955 torque converter
Mast :
- Wilson 102 Height hydraulic derrick (serial #991-102-300)
- Hydraulically raised with multiple scooping raising arm
- Crown Block and Safety Platform
- Pipe racking board
- Standpipe
- 3 (ID) x 50 long Kelly hose
- Tong counterweights
- Vapor proof lighting
- Martin Decker weight indicator
Rig Mounted Equipment:
- Hydraulic Break Out Cylinder
- Winch
- Hydraulic Storage Tanks
- Fuel tanks
- Air compressor Bendix Westinghouse Model TUFLO 1000
- Deadline anchor
- Hydraulic leveling jacks
- Folding walkways, with stairs and safety railings
- Rig Mounted on Tri Axle Trailer
Substructure:
- 10 Height
- 16 Width (with walkways extended)
- 12 Length
- 2 piece substructure
- Box type structure, with rotary table beams
- 10 W x 40L back on ramp
- Removable Stairways
- Folding walkways
- Safety railings
- Lighting
- Includes rat hole / mouse hole digger
Travelling and Rotating Equipment:
- Chain Driven Rotary Table - Gardner Denver Model 175
- Split Master Bushing
- Swivel - Gardner Denver Model SW 125
- Kelly - Brand New 40Length x 4 1/4 Square Kelly
- Drive Bushing
- Travelling Blocks - 3 sheave blocks, grooved for 1 line
- WEBB-WILSON Hydra Hook Elevator Bales
- Rig set up to add an extra travelling block to increase all capacities
- Air Head Oiler
Casing, Pipe and Equipment:
- 7,000 +/- 3 ½ OD drill pipe
- 3 ½ IF connection
- 4 Ύ OD flush drill collars, 3 ½ IF connections, slip recessed
- 6 Ό OD with 4 ½ X-hole connection drill collars
- 2 Standard 32 pipe trailers
- 1 Extended 35 center trailer
Well Control Equipment:
- Williams 11 annular BOP
- Washington Rotating head assembly, complete with 16 Ύ air bowl
- Assortment of Flanges including
o Companion flange 13 5/8 x 13 3/8
o Companion flange 13 5/8 x 9 5/8
o Companion flange 13 5/8 x 7 inch
Custom Rig Doghouse:
- 8W x 24L trailer mounted dog house
- Easy Access Front Porch
- Rear porch where generator is mounted
- Custom Built House for all tools
- Storage areas
- Breezeway
- 3000 gal fuel cell
- Geolograph
- Work Bench
- Drilling Supplies
- Night work lights
- All mounted on 40 trailer
Generator:
- Stateline 10 KV generator with all necessary Switching gear, gauges and controls, mounted on Rig Doghouse Porch
Miscellaneous Equipment and Parts:
- Tool Trailer
- Soap tank with MYERS Model C20-8CR injection pump and 1 Ό lubricator
- Soap pump powered by Waukesha Engine
- Assortment of casing elevators and single side door elevators
- 2 air pump
- Assortment of change over subs
- Dead man stakes and cable for rig tie down and secure lines
- Webb Wilson Type B tongs with assortment of tong jaws
- 4 ½ bottleneck drill pipe elevators
- Drill collar slips
Air System (available at additional cost):
2001 Ingersoll Rand Airpac:
- Model number XHP1170
- Twin air compressors included
- Trailer Mounted
- Cat powered C15 engines capable of 525 HP
- Twin air units rated for 350 PSI and 1170 Cubic Feet each
- Both air unit have approx 7,600 hrs
- All units plumbed together
- compressor, complete with all necessary collers, gauges, valving and controls
Price:
$650,000 PRICE REDUCED TO $450,000
SPEEDSTAR SS-40T DRILLING RIG (Ref#11162N)
Mounted on a Three Axle Trailer
Derrick Rated for 176,000 Lbs. Gross Capacity with 60' of Working Space Above the Rotary Table
Triple (3) Stacked Drum Drawworks with PO-218 Air Clutches and Catheads
Hydromatic Brake on Drawworks (used to assist friction brakes via water pressure)
Three Sheave Traveling Blocks, Howard Turner 3" Watercourse Swivel
Brand New 4-1/2" X 40' Long Square Kelly and Drive Brushing (paid $10,000 recently)
Gardner Denver 18"
Rotary Table
Racking Board for Standing 30' Singles or 20' Doubles
Cummins 6BT Deck
Engine (900 hours since new)
Three Speed Transmission
Drill String Weight Indicator
Set-Up on a Six Part Line
Four Hydraulic Leveling Jacks with Steel Rig Mat for Stabilization on Rear
Hydraulically Raised Working Floor, Handrails
Break-Out Tongs (2), Rausch Hydraulic Drill Pipe / Casing Spinner, Drill Pipe El, Elevators and Slips
Miscellaneous Handling Tools Included
Wilson 600 6-1/4" X 14" Duplex Mud Pump, Mounted on a Tandem Axle Lowboy Trailer, Detroit Series 60 630 HP Engine (23 hours since new, paid $50,000 recently), Quick Change High Pressure Fluid End, Nitrogen Charged Pulsation Dampener
3,300' of 3-1/2" O.D Range III Drill Pipe Hard Banded Tool Joints Prior to Last Hole Drilled
(7) 6" O.D. Range III Drill Collars, Lifting Nubs Included
Lincoln Welder, Cutting Torch
Dog House / Water Tank Combination Trailer Mounted on an Aluminum Float, Penetration Recorder
Rig came off of a hole recently and is ready to work!
Price: $545,000
CAMERON 550 WORKOVER RIG PACKAGE (Ref#10952N)
Manufactured 2006
Cameron 550 rig, 15,000 of new 9/16 sandline, mounted on 1981 Pettibone carrier (rebuilt 2006), 110 x 250,000# 1981 Cooper derrick, hydraulically raised, certified with Gamma Ray, Series 60 Detroit 12.7 diesel engine, 475 hp (4,624 hours), 6061 Allison trasnmission, 110 ton 3-sheave Sowa block, 125 ton 72 electric links, 2-3/8 and 2-7/8 tubing elevators, Foster 5893R tubing tongs with lifting cylinders and air back ups, 100 ton air slips with 2-3/8 and 2-7/8 dies, Totco weight indicator
2005 Tandem axle Abu flatbed trailer with body
2007 Dodge 4 x 4 dually quad cab, 95,000 miles on diesel engine
2002 Ford F-550 flatbed 4 x 4 drilling crew cab truck with hitch for tandem axle trailer with tools
2006 Tarno tandem axle trailer with a mounted dgohoust, fifth wheel, lockers, heater, 100 bbl water tank
Package Price: $700,000
SPEEDSTAR SS-25 (Ref#183Nb)
Manufactured 1984,
triple drum, (2) 471 Detroit diesel engines, manual transmission, 18 rotary
table, mounted on tandem axle trailer, leveling jacks, 60 x 80,000#
hydraulically raised mast, no racking board, 7-1/2 x 10 Gardner Denver duplex
mud pump, hook, block, swivel Price: $280,000 PRICE REDUCED:
$200,000
FAILING 2000 (Ref#9519N)
Manufactured 1974, HD2000 drawworks, 53 stiff mast x 100,000#, Detroit Series 60 diesel engine, 18 Howard Turner rotary table, 3 Little Giant swivel, 4-1/4 hex x 35 long kelly with kelly bushing, mounted on 8 x 40 custom built tandem axle trailer with deck mounted fuel tank and toolboxes, hinged steel working platform, deck mounted hydraulic system, winch, injection pump, hydraulic generator, 5 hydraulic leveling jacks, spring ride on all axles with air brakes, safety equipment, tools and spares Price: $275,000
GARDNER DENVER 15W (Ref#10014N)
WEJ 750/300 air compressor with cycle blower, Gardner Denver 5-1/2 x 8 duplex mud pump, 10 Gardner Denver retractable table, 33 x 4-1/2 square kelly, dhree drums (kelly, traveling blocks and sandline, all air clutches and spinning chain, new 53 square tubed mast with racking board, can handle Range 3 casing, stands doubles back in derrick, mounted on 4 axle Crane Carrier, 4 hydraulic leveling jacks, hydraulic pulldowns, 400 Big Cam Cummins Turbo charges engine Price: $185,000
GARDNER DENVER SD55 (Ref#9185N)
Manufactured 1980, drawworks rebuilt 2004, Double drum, Parmac Hydro brake, air clutches, Cummins N14 diesel engine, 56 x 135,000# mast, racking board, mounted on 4 axle Crane Carrier, (2) Gardner Denver FXO 6 x 10 duplex mud pumps, McKissick 100 ton block/hook, GD 100 ton swivel, 30 fluted Kelly, Howard Turner 18 rotary table, 4-1/2 x 30 round fluted Kelly, includes pipe truck (no pipe included) Price: $480,000
IDECO 1000HP DRILLING RIG (Ref#11167N)
Single drum drawworks, 1-1/8 drilling line, hydramatic brake, 2 engine compound (2) Detroit Series 60 diesel engine 550 hp each (drives rig and carrier), 112 x 378,000# mast, 8 lines, 16 substructure, mounted on 6 axle carrier, (2) 6061 Allison transmission, 200 ton BJ hook/block, LB200 swivel, 5-1/4 hex kelly, 17-1/2 rotary table, mud boat, walkways and rails, V door Price: $1,600,000 as is
The rig could be rigged up to your specifications with (2) 1000 HP Weatherford pumps and engines and mud system, BOP, and handling tools at an additional cost.
SUN MACHINERY CORP.
Anthony Iorio
Telephone: (516) 536 7375 Fax: (516) 536 7317