Spencer Harris 7000 Drill rig for sale
SPENCER HARRIS 7000 (Ref#4208N)
Brewster N4 drawworks modified with 15” Hydromatic brake, 2 axle compound
97’ x 250,000# Spencer Harris telescoping mast
Mounted on 3 axle float
Skytop Brewster 150 ton block and hook 4 sheave
(2) Detroit 8V71 diesel engines
Substructure: 19’ Wide x 12’ Long, ramp 40’ x 8’4” – 44” high
18” x 44” Brewster rotary table with split master bushing
4-1/4” x 36 hex kelly, kelly bushing, kelly shuck, mousehold shuck
(1) Great American GA 750 mud pump with 379 Cat enigne
(1) Great American GA 550 mud pump with D379 Cat engine
Two mud tanks with mud hopper, desander, desilter, and all plumbing and shale shaker
18” catwalk 8 x 40 and V Door
Junk box and wire line unit
Doghouse mounted 300 bbl water tank
(13) drill collars
7500’ 4” drill pipe
225 kw generator p/b Cat 3406
Gardner Denver air compressor
Subs and handling tools
Choke manifold, 10,000 gal fuel tank, 11” 3K Reagan BOP, BOP closing unit,
Kelly chuck, mousehole shuck, lubester skid/junkbox skid, set drill pipe slips, drill collar slips, set 9’ elevator links, (6) drill collar , set pipe racks, set BJ type C manual tongs, lifting subs,
Price: $750,000
Rig is stacked, surplus to needs of drilling contractor
IDECO H-35 RAMBLER RIG (Rig#2321N)
300 HP on 4 axle carrier
DRAWWORKS
Ideco H-35 Double Drum w/ Parmac double 15’ hydro-matic brake, Foster Makeup and breakout catheads-Braden hydraulic tugger winch-Powered by Detroit 8V71N diesel engines w/ Allison automatic transmission
MAST
Ideco KM 95-212 95 ft. 212,000 lb on 6 lines-3 1/2 standpipe w/3” X 45’ Kelly hose
TRAVELING
Ideco UTD 110 ton unitized block-hook w/3-30” sheaves 1” line-72” X 1 ¾” 300 ton weldless bails.
ROTATING
Ideco SR 175 rotary table-17 ½” opening w/split master bushing, Ideco TL 120 ton swivel, 4 ¼ “X 40’ square Kelly, Varco 4-roller drive bushing TIW upper Kelly valve, TWI upper-Kelly valve
SUBSTRUCTURE
Custom 200 ton integrally loads w/ 16’ X 18’ floor space- 13’ KB measurement w/ 10’ 6” clear height under rotary table. Substructure and walk section are unitized and wheel mounted including hydraulic pipe handling accessories.
PUMPS
2- Ideco 550 HP - Powered by Series 60 Detroit Diesel Engines - 15” stroke
MUD SYSTEM
2-180 barrel capacity steel mud pits, by-pass troughing, top mounted walkway with safety railings, lighting, Harrisburg 10” single cone DeSander.
WELL CONTROL EQUIPMENT
Regan 11” 3000# Annular Type BOP
Schaffer 11” 5000# BOP (LXT 5000 double ram)
80 gal accumulator with 4 stations, one 5 HP electric charge pump, air pump
GENERATOR ACCUMULATOR, FUEL TRAILER
3000 gal diesel tank, 130KW Cummings 855 and power panel, 80 gal accumulator Koomey, Oil bins and spare parts storage
DOG HOUSE, CHANGE ROOM
8’X 40’ Van equipped w/.tool room, knowledge box Record-O-Graph, drilling recorder 2 pen, crew change room and lockers.
WATER STORAGE
500 bbl single axle frac tank divided into 25 bbl compartments
AUXILLIARY EQUIPMENT
Wooley Type “B” rotary tongs 3 ½ to 13 3/8 heads
Rig is stacked, surplus to needs of drilling contractor
Price: $850,000
CHALLENGER 3T-320 (Ref#7000N)
Manufactured 1981, 550HP, Mounted on 3 axle Trailer
Drawworks:
320 H Double Drum for tripping blocks and drilling blocks-make up Spinning Cathead and hydraulic Breakout cylinder powered by 12V71 w/Allison 5660 transmission.
Mast:
Challenger 150-64 Height 64’ Serial #182 150,000 on 6 lines Hydraulic winch 30,000 lbs. Pull down unit.
Travelling:
6 line drilling blocks in tracks with howard turner 100 ton Swivel and 6 line tripping blocks.
Rotary:
Howard Turner Rotary Table-17 ½” opening w/split master bushing 4 ¼” X 40” square Kelly.
Substructure: 18’ x 13’ floor space, mounted on rig with 10’ x 7’ racking Mat Catwalk, with folding V door, pipe racks, pipe tub
Pumps:
2-Gardener Denver FXN500- 1)Powered by 12V71 Detroit Diesel Engine- 550 HP
2)Powered by 60 series Detroit Diesel Engine – 550 HP
Mud system:
(2) 140 bbls pits with 3 compartments each. Bypass Troughing Top mounted walks with cellar. Jet-Harrisburg 10” single cone desander powered by 50 HP electric motor and 5” X 6” centrifical pump with internal piping- Mud mixer.
Well Control Equipment
Schaffer 9” 3000# Annular Type BOP (Model GK-8-900)
Townsend 9” 3000# Double-ram BOP
ADS 1000 – 60 gal accumulator w/ 15hp electric charge pump; air backup.
Generator Accumulator, Fuel Trailer
Accumulator Fuel tank
130 KW Generator 480 volt powered by 855 Cummins
Spare parts storage
Dog House, Change Room
Knowledge Box, Recorder, Lockers, Tool Room, Change Room
Water Storage
550 bbl single axle frac tank
Rig is stacked, surplus to needs of drilling contractor
PRICE: $650,000
1985 SPEEDSTAR 150K (Ref#11081Na)
Depth rating: 5,000' with 4-1/2" 16.60 drill pipe
Manufactured 1986, Reworked (cost: $100,000), Cleaned and painted blue and white
2’ sub base and work platform, 60’ mast hydraulically raised and lowered, single rod pipe loader
Allow 47’ working space above table
7,500# auxiliary winch, 4000# auxiliary winch
Mounted on 4 axle carrier, 4 hydraulic leveling jacks
Powered by Cat 3408TA, 450 hp diesel engine, Allison 6 speed transmission
150,000# pullback, Maximum torque 140,000”/lb @ 0-100 rpm, pipe racking boards stands single 30' pipe/collars
King 3" ID 75 ton swivel,
2" x 3000 psi choke manifold
25 gpm triplex water injection pump
Price: $335,000
Sun Machinery Corp.