SUN MACHINERY CORP.
Call: 516-536-7375 / 516-536-7317 fax
Speedstar (Franks)1
SPEEDSTAR 1500 (Ref#7627N) mounted on 1991 International tandem axle truck with Cummins engine, 9T Fuller transmission, PTO, 400 of 4-1/2 x 20 drill pipe (2-7/8 IF), 22 fluted kelly, 42 mast, (2) Mission 5 x 6 pumps, reverse air capable Price: $80,000
SPEEDSTAR 1500 (Ref#2845R) Manufactured 1989, mounted on 1989 Peterbilt, 48 mast, 10 retractable table, pulldown, air drawworks, rebuilt 5x10 mud pump, leveling jacks Price: $145,000 Pipe available at extra cost
SPEEDSTAR 1500 (Ref#9767N) 2000 drawworks, 5 x 8 mud pump, mounted on 1970 Mack truck with 400 Cummins diesel engine, 35 mast, 8-1/2 retractable table, 4-1/4 x 23 kelly, pulldown, air clutches, swivel, 4 hyd leveling jacks, 1400 of 2-3/8 IF drill pipe Price: $75,000
No pipe fits on rig, pipe trailer avalable at additional cost.
FRANKS 2000 (Ref#3410R) Franks 2000 drawworks, single drum with rathole digger, 55 x 80,000# hydraulically raised mast, 4 or 6 lines, mounted on single axle trailer with 471 Detroit diesel engine, hydraulic pump for (4) leveling jacks, (3) sheave Johnson 30 ton block, BJ hook, King 32A 2 swivel, 4 x 37 fluted kelly, 12 Hacker rotary table, 2 x 2000 psi rotary hose, no mud pump, weight indicator, tong gauge and rig tongs, 1800 of 3-1/2 FH thread x 30 drill pipe with square shoulder 13.3 ft/lb, (4) 4-3/4 drill collars, 4 FH with handling subs on single axle float, crossovers, 6-3/4 bit, bit breaker, slips, elevators,has drilled 7 wells 900 to 1400 and drilled a 2,450 well Price: $100,000
FRANKS 1500 (Ref#6532) Manufactured 1966, Mounted on a 1966 Cline Crane Carrier, 671 Detroit, 5x2 transmission, 3 axle, 5 x 6-1/4 Failing mud pump, 256 S2 LeRoi 450/250 air compressor, 40 mast, 234 kelly, 1-1/2 pulldown chains, 2 Little Giant water swivel, 8-1/2 non-retractable rotary table 5 speed, 3 hydraulic leveling jacks, All air operated clutches, Pipe rack and mud pit Off market
FRANKS 1500 (Ref#2032Na) Manufactured 1969, Detroit 8V71 deck engine, mounted on Cline Crane Carrier with 350 Cummins, 3 x 4 centrifugal mud pump, 50 derrick, 5 x 24 Kelly, 7 ½ retractable table, breakout wrench, chain pulldown, mechanical clutches, 1 front 2 rear hydraulic leveling jacks Price: $70,000 Pipe available at extra cost (3-1/2 x 20)
FRANKS 55 (Ref#1849N) 32 square kelly, 51 mast for Range III casing, mounted on GMC truck, propane engine on deck and in carrier, 8 retractable table, air clutches, approx 800 of 2-7/8 IF Range 2 drillpipe and collar on trailer, 5 x 8 Gardner Denver mud pump with Cat diesel power on trailer, GMC single axle gas truck tractor, ready to drill Price: $100,000
FRANKS SPEEDSTAR 1200 (Ref#14387) air/water combination, mounted on 1981 Ford 9000 truck, 350 Cummins engine, 5 x 6 mud pump, 650/250 air compressor, no tools, new tires, recently refurbished drawworks Price: $85,000 OFF MARKET
SPEEDSTAR SS-135
(Ref#2572N) Manufactured 1981,
500/250 air compressor, 5 x 6 mud pump (rebuilt), new 8-1/2 retractable table,
23 kelly, standard mast and pullback, Bean water injection pump, mounted on
1981 International truck with Cummins engine, 4 hydraulic leveling jacks, good
condition, new bushings, new walking beam, currently drilling, no tools, 1000
of 2-3/8 x 20 Mayhew JR pipe Price: $135,000 PRICE
REDUCED: $65,000
SPEEDSTAR SS-135 II (Ref#1940N) Manufactured 1978, 100S2 LeRoi air compressor, 5 x 6 Gardner Denver mud pump, 8-1/2 table, 2 swivel, 3-3/8 kelly, pipe rack, water injection, pulldown, mounted on 1993 International 4900 tandem axle truck, 500 of 2-3/8 IF rods, 4 10 subs, hoisting plug Price: $105,000
1993 4900 SINGLE AXLE WATER TRUCK (Ref#1940Nb) 1800 gal at extrac ost
SPEEDSTAR 135
(Ref#118Na) 5 x 6 mud pump, 580
Gardner Denver air compressor, mounted on 1988 International tandem axle truck
with Cummins engine, PTO, 8-1/2 retractble table, 3-1/2 kelly, pulldown,
mechanical clutches, breakout wrench, 3 hyd leveling jacks, 250 of 20 x 2-3/8
IF pipe, good condition Price: $65,000 PRICE
REDUCED: $55,000
SPEEDSTAR SS-135 (Ref#15723) 1978, 5x6 Gardner Denver pump, retractable table, hydraulic jacks, 23 ft. kelly, 300 ft. of new drill rod, with or without air, mounted on a 1978 Ford 8000 Cummins Diesel Truck, runs good, Price: $87,500
SPEEDSTAR SS-135 (Ref#11261) 3208 Cat diesel on deck, 5 x 6 mud pump, 7-1/2 retractable table, hydraulic pulldown, 3 x 4 Mission pump, 3 discharge hoses, rigged up for reverse air, mounted on 1978 Chevy truck, 3 leveling jacks.
International water truck, manufactured 1990, 1100 gallon water tank, 466 Detroit diesel engine
Package Price: $105,000
SPEEDSTAR SS-50 (ref#9391) 1967, all hydraulic, new 3 x 4 Mission centrifugal pump, GD 500/250 air compressor, 600 drill rod, tooling, ready to drill Off Market
Also trailer mounted Emsco mud for additional cost
SPEEDSTAR S40-SP (Ref#5904) Manufactured 1982, double drum, cathead, brake, 3/4 drill line and sand line, 3rd drum (3000 of 3/8 line), Detroit 671 diesel on deck, mounted on 4 axle Crane Carrier with 8V71 Detroit diesel, 18 rotary table (rebuilt), 7-1/4 x 10 Gardner Denver duplex mud pump, new 60 x 120,000# one piece mast, hydraulically raised, racking board, 5 sub and backup ramp, 400 barrel water tank, doghouse 7 x 20, transport in water tank and raises for use, 40 3-compartment mud tank with Rumba single screen shaker, Allis Chalmers 90 kw/60 cyc generator, 3000 of 3-1/2 x 31 drill pipe, (2) kellys 36 x 4-1/4 and 35 x 3-1/2. weight of rig 91,000#. Off Market
GEFCO SS40-T (Ref#15062N) Manufactured 2007, 3 axle , trailer mounted, 75,000 lb suspension, 11:00 X 20 14 ply tires, steel wheels. 40' X 4-1/4" square kelly, 3" King 3MB swivel, 4 hydraulic leveling jacks, Triple drum drawworks with twin catheads, Detroit /Mercedes 230 HP diesel w/ Allison 754 transmission, 18" table 150,000 in. lbs. torque @ 100 RPM, 60' of working height in mast above table, 6 part line sheaving, Type C tongs, Three stairways with hand rails and walk ways all around, Bare drum single line pull 22,000 lbs., 116,000 lbs. total line pull at table), 92,000 lbs. pull with block at top of mast, 3" stand pipe with 3" plumbing, Cat 2520 injection pump, Hydromatic brake, Martin Decker weight indicator, Break out cylinder, Drill Pipe racking board, 7 mast rig lights Price: $670,000
Location: South Pacific.
SPEEDSTAR SS-40, 3500 CAPACITY (Ref#4541R)
Manufactured 1982 set up for big water wells
Speedstar SS-40 Drilling Rig mounted on a 4 axle crane carrier powered by a 400 Big Cam Cummins Engine. (with hydromatic brake removed)
63 foot mast
3 Drum Drawworks powered by a 6V-71 Detroit (Rebuilt) Engine and an Allison Model 653 transmission (rebuilt)
6 x 6 Gorman Rupp pump is mounted on the rig and is powered by a 471 Detroit Diesel Engine
27 Rotary Table, Equipped with hydraulic tool handling winches.
(2) 60 pg Swivels (new)
Kelly hose
4 Ό hex Kelly (rebuilt)
Kelly Bushing (rebuilt)
Saver Sub
Bit Subs
X-over sub 4 FH box x 4 ½ XH pin
4 Drill pipe elevators
7 Elevator
5 ½ Elevator
Tongs
3000 4 FH Drill pipe
(8) 6 Ό Collars 4 ½ FH
National C250 6 ½ x 15 Mud Pump- D353 Detroit
Emsco DA500 5 ½ x 16 Mud Pump D353 Detroit
1981 Western Star Winch Truck with Braden 50 Ton Winch
1990 Kenworth Truck
1985 GMC 65 bbl Water Truck
1969 Autocar Winch Truck with 35 ton winch
Freightliner Winch Truck with 25 ton winch
2008 Allight light plant with generator
1982 Ford Doghouse
1955 Hobbs pipe trailer
Lacro dropdeck trailer
2005 Big Tex Flatbed Trailer with 30 ft. deck
PRICE: $680,000
GOOD, CLEAN CONDITION
LOCATED ROCKY MOUNTAINS
SPEEDSTAR SS40 SP (Ref#6793R) Manufactured 1982, triple drum, sandline, 6V71 Detroit diesel on deck, new transmission, 65 x 185,000# hydraulic raised mast, National C250W mud pump with Cat 353, DA 550 duplex mud pump with Cat 350 hp diesel engine, 6 x 6 Gorman pump, mounted on Crane Carrier, 27-1/2 rotary table, (2) 6-1/4 x 40 kelly, 4-1/4 x 40 kelly, 3,000 of 4 drill pipe, (8) 6-1/4 drill collars, shale shaker Price: $700,000
SPEEDSTAR SS40 (Ref#784N) 2 available, 1982 and 2007
6 line block, triple drum, Ύ drill line, 63 x 120,000# hydraulically raised stiff mast, chain case operates rig, 18 rotary table folds up to 36, 7-1/2 x 10 Gardner Denver duplexmud pump, block, hook, square kelly, tools, subs
1982 machine: 8V71 Detroit diesel engine in Crane Carrier, new 6V71 Detroit on deck, drawworks gone through, crown gone through
2007 machine: Detroit/Mercedes 300 hp on deck, Cat C11 diesel in carrier
Both rigs new tires, good condition, ready for use
2200 of 3-1/2 x 30 bottleneck drill pipe (with each rig)
Last drilled in 1/09
Price 1982:
$550,000
Price 2007:
$775,000
OFF MARKET
(2) SPEEDSTAR SS40 (Ref#7587Na) Manufactured 1984-86, 4000' depth capacity with 3-1/2" drill pipe, Triple drum drawworks, Main drum 18,000# single line, Auxiliary drum 7,000# single line, 3 axle trailer mounted, 4 hydraulic leveling jacks, 3 axle trailer (25,000# on each trailer), Powered by (2) 6V71 Detroit diesel engine 175hp, (2) torque converter, w/ 5 speed transmission, 2 cat heads, 60' x 108,000 hydraulically raised mast, Crown block w/ 24" triple sheaves, Weight indicator, 3" swivel, Kelly & Kelly bushings, 18" rotary table, 7-1/2" x 10" Gardner Denver duplex mud pump
Support Equipment:
85 joints drill pipe 3-1/2" x 30'
2 joints drill collar 8" x 30'
2 joints drill collar 6" x 30'
2 each slips (3-1/2" & 8")
1 Pair tong
1 each elevator for drill pipe (3-1/2")
1 elevator for drill collar (8")
6 subs - different sizes
Price: $490,000 each
Location: Middle East
SPEEDSTAR SS200 (Ref#475N) Manufactured late 1970s, 8 retractable table, 5-1/2 x 8 mud pump, 50 SDS LeRoi compressor, pulldown, mechanical clutches, 3 winches, mounted on 1999 International Paystar tandem axle truck with Cat 3406E engine, PTO, 3 hydraulic leveling jacks, good condition, currently drilling Price: $250,000
SPEEDSTAR SS-25-SD (Ref#4616) Manufactured 1984, triple drum drawworks, cathead, breakout cylinder, sandreel, (2) 471T Detroit diesel 380 hp total, Gardner Denver 7-1/2 x 10 duplex mud pump, liner range 5 7-1/2, weight indicator, 18 rotary table, 38 x 5-1/4 kelly, 3 swivel, tongs with counterbalances, lighting system, 3 elevators, slips, drill collar slips, extra liners, swivel packing and parts, mounted on 2 axle trailer with 4 hydraulic leveling jacks.
250 barrel tank mounted mud system with sediment tank and electric mud lift system to shaker, extra shaker motor and screens.
100 kw, 230 volt, 3 phase skid mounted generator system,
2,150 of 3-1/2 x 31 drill pipe, 2 drill collars, pickup nipples, bit subs.
Catwalk, V-Door, pipe racks,
2009 Southwest support trailer, 20 gooseneck lowboy with 7k axles, spare, storage cabinets, large vise and chain vise.
1979 Mack truck tandem axle with Maxidyne engine oilfield bed, gin poles, winch, 5th wheel and 40 Fruehauf trailer with rolling tailboard (good condition, DOT inspected).
Price:
$700,000 PRICE REDUCED:
$500,000
SPEEDSTAR SS-25 (Ref#919N) Double drum drawworks, 35,000# each, 60 x 80,000# square pipe hydraulically raised mast with monkey board, 1 winch, mounted on 2 axle trailer with 4 hydraulic leveling jacks, (2) Detroit 471 diesel engines on deck, 17-1/2 rotary table, kelly and kelly bushing, 5 x 10 duplex mud pump on deck, air compressor mounted on 2 axle wagon, 1,350 of 5 x 30 bottleneck drill pipe Price: $175,000
SPEEDSTAR SS25 (Ref#14337N) Twin Detroit 471 engines, 18 table, Rebuilt Gardner Denver 7-1/2 x 10 mud pump, bailing drum, 4 hydraulic jacks Price: $295,000
SPEEDSTAR SS25 (Ref#295N) Manufactured 1980, Rebuilt 2007, double drum, 2 axle trailer mounted, Gardner Denver 7 1/2 x 10 duplex mud pump, (2) 471 Detroit diesel engine on deck, 60' x 80,000#, single piece mast, 17 1/2" rotary table, handling tools, located in Mexico, will deliver to the US border, Price: $295,000
SPEEDSTAR SS-25 (Ref#12491) Manufactured 1975, 3 drum drawworks, 60 x 80,000# hydraulically raised mast, one piece mast with monkey board made from square drill pipe, 50 ton working hook load, no chain pulldown, mounted on 2 axle trailer, 8 new tires, (2) GMC 471 diesel engine, 4 hydraulic leveling jacks, Worthington 5 x 10 duplex mud pump, 17-1/2 rotary table, 16 table passing diameter, 30 mast passing diameter, 1125 of 5 x 30 drill pipe, (5) 6 x 28 drill collars, (2) BJ Type C and Type D, 1 hex kelly 30, 1 King 65 swivel, work rack, cleaned and painted, excellent condition, located Mexico, transport dimensions 38.28 long x 8 wide x 12 high
Drills everyday Extra equipment available:
Sullair 900/300 air compressor on Skymotor with Detroit 12V71 twin turbo
112 IR DHD hammer
(2) 17-1/2 and (1) 14-3/4 hammer bits
Package Price: $245,000
SPEEDSTAR SS-22
(Ref#731Nb) Manufactured 2005, 4450
hours, 51 x 80,000# derrick, 3 drum drawworks, mounted on 3 axle 2005 Mack
Granite truck with 427 Mack diesel engine, 7-1/2 x 10 FY-FXD duplex mud pump,
34 hex kelly, 3 swivel, 18 retractable table, pipe spinners, breakout ram,
block/hook, kelly, kelly bushing, some pipe and tools Price:
$590,000 PRICE REDUCED: $510,000
SPEEDSTAR SS-22
(Ref#731Na) Manufactured 1982, 3
drum drawworks, 54 x 80,000# hydraulically raised mast, mounted on 4 axle Crane
Carrier powered by Cummins N14 diesel engine, Gardner Denver FO-FXO 7-1/4 x 10
mud pump, 10 retractable table, racking board, block/hook, kelly, kelly
bushing, currently drilling Price: $330,000 PRICE:
$245,000
SPEEDSTAR SS-22 (Ref#3369R) Manufactured 1982, 3 drum, 5/8 lines, 5/16 x 1500 swab/sandline, 56 x 80,000# hydraulically raised mast, mounted on 4 axle Crane Carrier with 400 hp Cummins diesel engine, 7-1/2 x 10 Gardner Denver duplex mud pump, air clutch, Mission charge pump and pressure oiling system, (2) 256 air compressors 450 cfm/250 psi (rebuilt 10/2010 with 60 hours), 10 retractable hydrostatic 5 speed rotary table, McKissick 30 ton block rigged up on 5 lines, 60,000# casing, 4 lines on kelly, oil injection, 3 mud/air piping, Western swivel with 35 x 4-1/2 square retractble kelly, 1,500 of 3-1/2 x 30 x 3-1/2 IF bottleneck drill pipe, (4) 4-3/4 collars with wrench flats, tools and bit sub, pipe float trailer, no pulldown system, could be reinstalled on brackets and sheaves on derrick, weight indicator, hydraulic tong pull set up with gauge, Rauch pipe spinner. Price: $295,000
SPEEDSTAR SS-22 (Ref#11873N) mounted on 3 axle crane carrier with 290 Cummins engine, 5 ½ x 8 Gardner Denver mud pump, Leroi 256 SDS air compressor, 8 ½ retractable table, 50 mast, hook/block, swivel Price on request
SPEEDSTAR SS15 III (Ref#4558N) Manufactured 1995, mounted on Pterbilt with rebuilt Cat engine less than 1000 hours, 900/150 Sullair compressor, 3rd drum, 10 retractable rotary table, 35 mast, water injection, 15 joints of 4 ½ x 15 drill pipe Price: $180,000
SPEEDSTAR SS-15
(Ref#2688N) Manufactured 1983,
5-1/2 x 8 mud pump, 8-1/2 retractble table, 50 mast, mounted on International
2500 truck with 230 Cummins engine, PTO, own owner rig, good condition Price:
$225,000 OFF MARKET
Pipe available at additional cost
SPEEDSTAR SS-15 (Ref#630N) Manufactured 1979, mounted on 1991 International truck, Cummins diesel engine, Road Ranger transmission, 40 mast, 23 kelly, 3 swivel, 8 retractable table, 4 leveling jacks, 380 of 4-1/2 x 20 x 2-7/8 IF drill pipe, (2) Mission 4 x 3 x 13 mud pumps, breakout tongs, slips, subs, PTO drive, 50,000# pullback, 6 tricone roller bit, 4 5 6 and 8 button bits, 4 hammer Price: $95,000
SPEEDSTAR SS15III (Ref#6779N) Manufactured 1978, mounted on GMC tandem axle truck with 290 Cummins engine freshly overhauled, Gardner Denver 5x6 mud pump, Leroi 256 air compressor, good condition, currently drilling, no tools or pipe available Price: $96,000
SPEEDSTAR SS-15
(Ref#11372N)
4 axle crane carrier, Two front hydraulic leveling jacks with (2) stabilizers,
Two rear hydraulic leveling jacks and hydraulic pulldowns, 400 Big Cam Cummins
diesel engine, 53 mast with racking board, Handles Range III casing, 3 drum
drawworks with air clutches and spinning chain, 4 ½ x 25 fluted kelly, 8 ½
Gardner Denver retractable table and diverters, Gardner Denver 8 ½ x 10 duplex
mud pump Price: $170,000 PRICE REDUCED: $150,000
At extra cost: drill pipe, subs and water truck
SPEEDSTAR SS-15 (Ref#6813N) Manufactured 1980, Mounted on 4 axle Crane Carrier, Cummins 335 engine, 256 Sullair 600/250 air compressor, 8 gpm Myers water injection, 3L4 grout pump, 8-1/2 retractable rotary table, double drum drawworks with 22,000# capacity with 4 lines, 1 sandline, 3 hydraulic leveling jacks, hydraulic cooler, oiler, breakout tong, Gardner Denver FD-FXX 5-1/2 x 8 mud pump, pulldown, located Mexico Price delivered to Texas border: $160,000
SPEEDSTAR SS-15 (Ref#6840) Manufactured 1982, 500/250 compressor, plumbed for mud pump with clutch, 10 rotary table, 36 mast, mounted on Crane Carrier with 450 Cummins diesel engine, 600 of 4-1/2 x 15 drill pipe, hammers, stabilizers, handling tools, cable pulldown by hydraulic cylinder, water truck with 1000 gallon tank or C65 Chevy gasoline engine Price: $140,000
SPEEDSTAR SS-15 (Ref#2877N) Manufactured 1977, 450/250 air compressor, 6V53 Detroit diesel deck engine, mounted on GMC truck with 471 Detroit diesel engine, set up with 23 kelly, no tools or pipe, clean rig, good condition Price: $70,000 1400 of 3-1/2 API x 25 drill pipe at additional cost
SPEEDSTAR SS-15-III (Ref#2949N) Manufactured 1976, 750/250 air compressor, PTO, 10 retractable table, mounted on Crane Carrier with 350 Cummins engine, 10 retractable table, hydraulic pulldown, rod box, 4 jacks, breakout tongs, slips, no drill rod Price: $95,000
SPEEDSTAR SS15 II (Ref#9014Na) Manufactured 1976, PTO, mounted on crane carrier with new engine, Sullair 750/250 compressor, retractable 8 rotary table, chain pulldown, pipe rack Price: $100,000
SPEEDSTAR SS15 (Ref#5589N) Manufactured 1975, PTO, mounted on 1975 International with 400 Cummins engine, Gardner Denver 5 x 8 mud pump, 8 ½ retractable table, 2 swivel, 23 6 fluted Kelly, hydraulic pulldown, mechanical clutches, breakout tongs, 200 of 2 7/8 x 20 drill pipe, no tools, 1 front & 2 rear hydraulic leveling jacks Price: $70,000
SPEEDSTAR SS15 (Ref#8409R) Manufactured 1972, mounted on crane carrier, Leroi 256 air compressor, Gardner Denver 5x6 mud pump, 7 ½ retractable table, 15jts of 4 ½ x 20 drill pipe Price: $85,000
SPEEDSTAR SS15 (Ref#10059Na) 5 x 6 mud pump, LeRoi 256 S1 air compressor, mounted on Paystar 5000 truck Price: $115,000
SPEEDSTAR SS15 (Ref#10059Nb) 5 x 6 mud pump, Leroi 100 SDS air compressor, mounted on Kline CC 6 x 6, floatation tires, Price: $95,000
SPEEDSTAR SS10 (Ref#12606NA) Manufactured 1980, PTO, mounted on International tandem axle with DT 466 engine, 5 x 6 mud pump, 100 SDS compressor, ready to go Price rig only: $70,000
1981 INTERNATIONAL WATER TRUCK (Ref#12606Nb) 2000 gallon flat aluminum tank, DT 466 engine, toolboxes, pipe racks, grout pump, tandem axle, no crane or welder
PACKAGE PRICE: $75,000
FRANKS FJ5 (Ref#6899) Double Drum drawworks (3 lines), 100 SDS compressor, mounted on 6 x 6 Crane Carrier powered by Cummins 270 diesel engine, 3 hydraulic leveling jacks, floatation tires, 5 x 6 Gardner Denver duplex mud pump, 4-1/2 kelly,Giant swivel, 2 pulldown chain, sandline, uses 15 drill pipe, pipe rack, 8-1/2 rotary table, drillers platform, stand pipe in derrick, 2000 machine Price: $95,000
FRANKS FA (Ref#9139N) Manufactured 1950s, New 5 x 6 Gardner Denver mud pump, hydraulic pulldown, auto chuck, mounted on 1975 Chevy with gas engine, PTO, freshly painted, needs new hydraulic lines, brake cylinders, 300 of 2-3/8 x 20 N rod, Price: $25,000
KOERING (SPEEDSTAR) WS50 PUMP HOIST (Ref#3987N) double drum 386 x 100,000# 3-poistion hydraulically raised mast, mounted on GMC tandem axle truck, Detroit 371 diesel engine on deck (may need work), main drum 26 diameter x 18 wide capacity, 1500 of 5/8 line, speed 15 56 rpm, sandline 19 dia x 10 wide, Price: $57,500
Tel: 516-536-7375 Fax: 516-536-7317 rigs@sunmachinery.com