SUN MACHINERY CORP

Telephone: (516) 536 7375 Fax: (516) 536 7317

These rigs are located at various locations through out the USA and Internationally.

SKYTOP BREWSTER NE-12A (Ref#14923) 2000 hp drilling rig, 21,320’ drilling capacity, Skytop Brewster NE-12A drawworks, 1-3/8” Crown-O-Matic, (2) GE DC traction model 5GE-752 ARI 1000 hp each, ElMagco Baylor brake Model 6032, Skytop Brewster cantilever 142’ SB-142-10-00 substructure auto raising 21’ x 25’ galvanized, capacity 1,328,500# nominal crown 7-60-1-3/8” sheaves capacity 650 tons, Hook block: Skytop Brewster model TB-566, Web Wilson type Hydra Hook 500 tons, Brewster Model RSH-27-1/2” rotary, GE DC Model 5 GE-752 ARI motor, Skytop Brewster Mod 9-SX 500 ton swivel, (2) Skytop Brewster Model B1300-T 5000 psi triplex mud pumps with (2) DC GE Model 5 GE-752 ARI, (2) centrifugal supercharger pump 5” x 6” Mission with 50 hp dc motors, General Electric Mod 0395X0485WO1 SCR unit, (3) GE diesel/AC generators Mod. 5AT18309665AS 600 volt, 60 hz, 850 kw, 1062 kva, 1200 rpm, (3) Cat D-399 16 cylinders 1215 hp each, Compressor house: (2) Ingersoll Rand 100 psi 3/min each/ one working pressure 400 bkm with (2) DC motors 40 hp. Mixing pumps: (2) centrifugal 5 x 6” Mission with 75 hp DC motor, (4) Brandt Mod MA-10 with 10 hp motor, 5” x 5000 psi standpipe, water tanks (4) 18,000 lts each, mud tanks (2) 210,000 lts, vibrators: (1) Brandt dual tandem, (1) Demco Mod 123 capacity 1050/350 gpm, (1) centrifugal oyno 5 x 6 75 hp, (1) Demco Model 416H 16 cons 4” 1280/1440 gpm, (1) centrifugal Mission 56 x 8” 75 hp, (1) Swaco, Koomey T-20160-35, has not drilled for several years, well maintained by established drilling comany Price: $6,000,000

BREWSTER N-4 5,500’ DRILLING RIG (Ref#14555N)

Brewster N-4 single drum drawworks (s/n 555), 1 1/8” line, Foster catheads. Powered by Cat D343, new hoses, new air throttle control, new muffler, Twin-Disc 11500 torque converter with new torque fluid cooler. Has hydromatic with self-contained water tank for use in winter with antifreeze, or can be routed from main water supply for normal use. New air compressor.

*Drawworks was completely dis-assembled, most bearings are new, low clutch is new (high clutch

is like new), brake drums were turned (brake blocks are like new), all new air lines and oiler lines.

Drawworks is ready to use and the engine runs very strong.
Lee C. Moore 93’ “slim” jack-knife 220,000# derrick (s/n 2361), 5 sheave crown 1 1/8”, tong counter weights, 3 ½” standpipe, new derrick lights and beacon light, new tong lines, new catlines, new raising line.
Ideco 17 ½” rotary table with new drive chain.
NEW 5’H x 16’W x 35’ 2”L substructure with steps & handrails. 2 piece pin in the middle sub with 3 spreader bars on bottom. Rolling tailboard on rear of sub for easy loading/unloading of drawworks skid without the need of a ramp.
1500’ of new 1 1/8” drilling line, new tong lines, new derrick climber line & harness and new catlines.
Emsco D-225 12” duplex mud pump with ALL NEW expendables and new rod oiler pump, quick-change valve caps, bolt-on liner heads, suction screen, 8 5/8” suction hose, powered by twin Detroit 6-71 engines. Pump is in excellent condition and the engines run strong.
8” BOP with manual closing unit. 10” Reagan is also available.
4 1/4” Kelly, 37’ long.
Ideco Kelly drive bushings
New Rat hole/Mouse hole digger assembly and new chain.
King 10 MB 120 ton swivel with 4 ½ LH connection, with NEW rotary hose.
Baash-Ross 3-30DBM 100 ton shorty block/hook combo, 1 1/8” sheaves.
7’ 6”W x 7’H x 16’L doghouse, skidded with front & rear porches mounted on 35’ Hobbs flatbed trailer. Includes toolbox and 500 gallon diesel day tank mounted on front of trailer. All new fuel lines to run to equipment.
Remanufactured Geolograph 2 pin drilling recorder (footage & weight on bit).
Remanufactured Bear automatic driller. Includes all new hoses & fittings.
Rebuilt Martin Decker Clipper weight indicator.
4,000 gallon fuel tank, with transfer pump.
3,800’ of 3 ½” drill pipe, grade E, range 2 with 3 ½ IF tool joints. (2) pipe tubs. (NOTE: approx 340’ need threads recut)
(9) 6” drill collars, 30’L, 4 ½ FH connections (includes bottom hole collar).
(9) drill collar pick-up subs.
Handling tools - BJ shorty tongs, d.p. & casing slips, d.p. & casing elevators, etc.
Drill collar safety clamp.
Misc items – derrick dolly (new lights & wiring ext. cord), vibrator hoses, pit jets, v-door, walkway, mud hopper & hoses, new derrick stand.

Price, as is: $1,700,000

Price completed: $1,900,000

SKYTOP BREWSTER RR-850 (Ref#11189) Manufactured 1986, Skytop double drum drawworks, 950 hp rating, depth rating 12,000’, driling line 1-1/8”, sandline 14,000’ of 9/16”, V-80 auxiliary brake, 5 hoisting speeds, 5 rotary speeds, 20x42” main drum, 13x38” sandline drum, 46x10” brake rims, mounted on 7 axle carrier, (4) rear axles 83,000#, (3) front axles 60,000#, 4 hydraulic leveling jacks, (2) 12V71 Detroit diesel engines (950 hp), (2) Allison CLT 5-speed transmission, Skytop compound, 115’ x 410,000# mast, racking capacity 2-7/8” tbg 37,800’, 3-1/2” DP 18,400’, 4-1/2” DP 12,600#, 4” x 5000# standpipe, 13’ clear height telescoping substructure, Ideco LR 275 rotary table, 300 ton swivel, 250 ton 5-sheave Skytop Brewster block, V-door, one unit folds down to catwalk, located overseas Off Market

SKYTOP BREWSTER 600 (Ref#13121N) Manufactured 1982, 400 bbl mud tank, 9’ substructure (recently refurbished), 5 sets of pipe racks with 45’ catwalk, 1 set of 100 ton BJ air slips for 3-1/2” drill pipe (new), 1 set 100 ton MG bottleneck elevators for 3-1/2” drill pipe (new), 8-5/8 API bowl with spiders for 6’ drill collars with safety clamp and wrench (new), 5600’ of S-135 double white bank 3-1/2” drill pipe, 26 jts of 6” XH drill collars, 15 jts of6” H-90 drill collars, set of type C manual tongs (refurbs). Handling tools for 2-3/8, 2-7/8 and 3-1/2 tubing, (2) sets BJ power tongs, Model 58 Foster power tongs, (2) sets of type C Cavins slips, swab equipment for 1.9, 2.16, 2-3/8, 2-7/8 and 3-1/2 tubing, Gardner Denver PAH 6000 psi rig pump with 160 bbl tank, all hard line new with new 602 unionts, 1982 Teton doghouse, 2004 Pioneer pusher trailer, 2005 F350 white truck Price: $1,200,000

SKYTOP BREWSTER RR-600 DRILLING/WORKOVER/WELL SERVICE RIG (Ref#12467) complete with portable mast 103’ clear working height x 275,000# with 8 lines. Depth capacity 18,000’ with 2-7/8” tubing, 8000’ with 3-1/2” drill pipe. Mounted on 5 axle back in carrier, 17-1/2” Skytop rotary table, 20x8 office/cabin, Shaffer double gate 11 BOP, Junior Brute shale shaker, Skytop Brewster swivel, square kelly drive square bushings, 3-1/2” square kelly, mousehole, 60 jts 3-1/2” drill pipe, 8 slick drill collars, 1 set rotary bushings, mechanically belt driven Emsco D550 duplex mud pump, elevator bail links, 2 sets casing elevators, 1 set (2) BJ Type B tongs complete with selection of jaws, grooved V-Door, substructure complete with cantilivered wings and internal water storage tank, 4 station Barnsdale BOP closing unit complete with Hydrill accumulator, trailer unit with fuel storage/oil storage tanks, storage room, Western diesel welding unit, Cat trplex pump wash down unit, trailer unit doghouse with storage room, 2 oilfield skid mounted 40’ x 10’ mud tank systems complete with mud lines, gune line agitators. Mud tank system, WKM choke manifold, basket containing miscellaneous tong jaws, bit breakers, corss overs, chemical mix tank, Harrisburg Hydrocyclone desilter unit, air driven Varco swivel, high pressure mud kicker hose Price: $700,000

SKYTOP BREWSTER 550 (Ref#12648N) 7500 – 8000’ depth capacity, Manufactured 1974, Mounted on 5 axle Crane Carrier (excellent condition), Series 60 Detroit diesel engine 500H.P. – engine installed new, 5860 6 speed Allison auto transmission, Mast: 110’ x 275,000# capacity, Hydraulically raised and scoped, Tubing board, Fluorescent lighting, 3 hydraulic 8,000# support winches, Hyd. Control wire line unit, Hydromatic and water cooled drawworks braking; 1500’ 1-1/8” drill line, 11’ tall back on sub structure on mud boat, flip out cat walks hinged “V” door, 18” rotary table, Brewster 4 S x Swivel 125 ton 4-1/2” x 43’ kelly hyd. Kelly spinner, Make up and Break out hyd. Cylinders, Elevators, slips and tongs for 4-1/2” drill pipe and 6-1/4” collars, Related handling equipment for various sizes tubing and casing

GENERATOR / PARTS HOUSE: 250 K.W. Generator p/b 3406 Cat diesel engine equipped to accommodate all electrical components, 45 CFM air compressor, 20HP electric motor, Parts house: storage shelves, clothes lockers, knowledge box

ACTIVE MUD SYSTEM: 310 BBL cap, Brandt 4’ x 5’ double screen shale shaker, 7-1/2 HP electric mud agitator, Desander and desilter p/b 5”x6” Mission Magnum centrifugal pump, P/b 75HP 460 volt electric motor

MUD PUMP: Ellis Williams 15 W 600 p/b D379 Cat diesel engine 600hp

DRILL PIPE: 4,700’ of 4-1/2” grade “E” 1660 wt., (8) 6-1/4” collars

3’ x 3’ x 50’ Cat Walk

(4) 40’ long pipe racks

3,000 gallon fuel tank

Junk box, misc. tools and subs

Price: $1,550,000

BREWSTER N-55 (Ref#6672n)
Hoisting: Brewster N-55   Console: Rebuilt October 2005
Compound:    Brewster, Inline, 2 Engine, 2 New 24" Clutches Rebuilt October 2005
Air Compressors: (2) Quincy Model 325   Quantity        2

Power #1: Caterpillar 3408 Ser #67u9164/67u42084 - 425 Hp Rebuilt
Power #2: Caterpillar 3408 - 425 Hp Rebuilt
Torque Converters    Twin Disc Model:11524-Tc-0 With New Extra Large Oil Coolers, Rebuilt Ser #42084/39013
Parkersburg Model: 40r Ser # A5-73 Brake
Crownblock Line Size: 1 1/8, Diameter: 36"X 60", No. Of Sheaves: 6, Rebuilt April 2006 Sowa 250 Ton Traveling Block And Hook, 5 Sheaves
Bj 250 Ton Hook
Elevator Links

Drill String Elevators    250 Ton, 5”, Inspected And Rebuilt
Drill String Slips, 5”, 6-1/4 Drill Collar Slips
Mast: 131’ X 480,000# Lcm Ha27155 Mast, Serial# T-2160, Rebuilt November 2005, 4" Stand Pipe New Figure 400 "6000" Psi Unions
Substructure:    15’ Height, 46'lx 24'w
Rotary Beam Height: 11'3"
Conductor Pipe Specs: 16" Diameter, 11'2" To Top Of 8" Flow Nipple
10'sub X 5' Pony, New V-Door, 2 Cat Walks W/ Pipe Stop, Stairs And Hand Rails
Air Tanks: 2 Systems Drillers Side For Dp/Kelly Spinner, & Hoist.
Off Driller Side For Drawworks With Check Valves To Prevent Clutch Failure.
Vertical Air Tank In Power House
Water Pumps: (2) New MCM Model:3x2x2.50x20h.P
Generator House: 40.5'l X 10'w X 9'h, (2) Cat 34406b
Kw:        210kw/275kw Rebuilt
Parts House On End, Motor Controls, Transformer, Air Compressor, Receiver Tank And Day Tank
Quincy 25 Hp Screw Style Air Compressor - Rebuilt
Mud Pump #1:    Lanzhou F-1000 X 10" Stroke, 398 Cat 925 Hp @ 1200 Rpms

New As Of May 03, 2007
Features:
        1. Unitized On 1 Skid
        2. Quick Change Motor Removal With Hydraulic Belt Tensioners

        3. Wpt Power Take Off
        4. Belt Driven Pre-Charge Pump
Mud Pump #2 : Lanzhou F-1000 X 10" Stroke, 398 Cat 925 Hp @ 1200 Rpms
New As Of May 03, 2007
Features:
        1. Unitized On 1 Skid
        2. Quick Change Motor Removal With Hydraulic Belt Tensioners
        3. Wpt Power Take Off
        4. Belt Driven Pre-Charge Pump
Liner Washer Tank: Wri 200 Gallon Capacity,   (2) 1 1/2x1 1.5 H.P.
Rotary Table: Ideco Shs 23.5, Kb: 16' 4", Split Master Bushing, Rebuilt, Square Style
Swivel: Continental Emsco L.A. 300, 300 Ton, Rebuilt As Of October 2006 Kelly: Smf, Connections:        Upper 6 5/8 Regular Lh X 4 1/2 X-Hole Rh Lower
Model:        4 1/4 Square 40' Oa X 37' Wa
Characteristic:        New As Of October 2005
Kelly Spinner: Oilworks OWI 1500, New As Of October 2005
Drill Pipe Spinner: Oilworks, Model: OWI35C7, New As Of October 2005

Air Hoist: Ingersoll Rand Model: 6kul, Rebuilt By Oilworks As Of October 2005 Kelly Bushing Varco Style Model: Hds, New As Of November 2005

Tongs: Foley Type B, Heads 4 3/4-8 3/4
Mud System: Shale Tank Approx 350 Bbl Capacity, 10’ X 6’ X 55’, Remanufactured In 2005
Features:
        1. V-Bottom Design
        2. (4) 10" Dumps To Reserve Flush With Bottom
        3. Inline Design (4) Compartment With (1) Agitator In The 4th Compartment
        At 10" Equalizer
        4. Grated Flooring Over Entire Pit For Safety
        5. Hand Rails Around Perimeter And Removable
        6. 360 Degree Lighting On Rig Side Of Pits
        7. Flush Personnel Access Hatches
        8. Wash Down Hoses, Hose Racks, Work Trays, Telescoping Light Poles
        9. 30'x 6" Qc Light Weight Suction Hoses To Reserve With
        Flotation For Filling Pits With Mud Mixing Pumps
        10. Folding Stair To Help Make Rig Moves More Efficient
        11. Folding Solids Trays To Reserve Plumbed To Skimmer Pump To Keep Trays
        Clean For Desander, Desilter And Shaker
        12. Skimmer Pump Piping On Reserve Side
        13. Bypass To Circulate Reserve Is Unitized In Compartment 1 Under The Shaker
        To Circulate The Reserve "Does Not Have To Be Removed For Rig Move"
        14. 8" Butterfly Valves Between All Compartments
        15. Over Flow To Reserve
Suction Pit: Approx 250 Bbls Capacity, 8'w X 6'h X 47'l, Remanufactured In 2005
Features:
        1. Round Bottom Design
        2. (3) 10" Dumps To Reserve Flush With Bottom
        3. Inline Design, 2 Compartment, 50-60 Bbls Pre Mix With Agitator,
        Suction Compartment With 2 Agitators
        4. Grated Flooring Over Entire Pit For Safety
        5. Hand Rails Around Perimeter And Removable
        6. (2) 1.5 Gallon Sweep Tanks On Pit For Each Mud Pump At Waist Height
        So Derrick Man Does Not Have To Leave Pit
        7. Provisions For Skimmer Pump Feed For Filling Or Cleaning
        With Reserve Water
        8. 1" Air And Fresh Water Lines On Rig Side Of Pits
        9. 360 Degree Lighting On Rig Side Of Pits
        10. Inspection Slot For Mud Sampling At Hopper
        11. Control Valves Under Hatches
        12. Flush Personnel Access Hatches
        13. Wash Down Hoses, Hose Racks, Work Trays, Telescoping Light Poles
        14. 30'x 6" Qc Light Weight Suction Hoses To Reserve With
        Flotation For Filling Pits With Mud Mixing Pumps
        15. 10" Bull Dog Equalizer Boot
        16. Stairs Are Integrated And Do Not Have To Be Removed For A Rig Move "Stairs
        Are Removable To Service Mixing Pumps"
        17. Overflow To Reserve
Mud Mixing Pumps: (2) O'dril Model: 6x5x11x2.50x50 H.P., With Dodge Couplings, New As Of October 2005
Features:
        1. Designed So Pits Can Be Filled From Reserve.
        2. Designed As Back Up For Charge Pump On #1 & #2 Mud Pump
        3. Hopper On Top Of Pits "New 10-05"
        4. Designed So Either Pump Can Be Used As Mud Mixer Or Charge Pump To
        #1 And #2 Mud Pump
Shale Shaker: Swaco, Model: "A.L.S." Linear Motion, Rebuilt As Of October 2005
Solids Control
Desander: O'dril, 10' X 2 Cones 1000gpm, Power: 6x5x11x2.50x50h.P. With Dodge Couplings, New As Of October 2005
Desander: O'dril, 5" 10 Cones 800gpm, 6x5x11x2.50x50h.P. With Dodge Couplings, New As Of October 2005
Agitators: Derrick, 5 H.P. X 36" Blades, (3) In Suction Pit And (1) In Shale Pit, New As Of October 2005
Blowout Prevention And Control Equipment,
Annular Reagan 10 3/4", New Element Installed As Of September 2006
Ram Type Schaffer Double Type –E 3000psi, Type 39 Rams, (1) 4 1/2 Pipe, (1) 5 Pipe, (1) 5 1/2 Pipe, (1) Blind, Rebuilt
Closing Unit Payne 4 Station 3000 Psi, Inspected And Repaired As Of October 2005
Choke Manifold: Superior Valve, Chokes: (2) 2" 5000 Psi, Valves: (2) 2" 5000 Psi,(1) 4" 5000 Psi. Full Flow Cross, New As Of October 2005
Fresh Water Storage: Shop, Approx 500bbl Square With Crimped Walls, 7'2"W X 10'5"T X 38'l, New As Of 2005 Drill Pipe: 5" Quantity: 8-9000', 19.5#, 4 1/2 If Conn
Drill Collars (21) 6 ¼, 4 1/2 X-Hole, Bb Box, Rg Pin, Slip Recess, 10" Hb On Box, New As Of October 2005
Weight Indicator: Martin Decker Seal-Tite weight indicator, New As Of October 2005
Tongue Pull Back Gauge: AOI, 20,000 Ilb Line Pull, New As Of October 2005
Presser Gauge: AOI 5000 PSI, New As Of October 2005
Wireline Unit: Five Star, Model: .092 15,000', New As Of October 2005
7500’ 1.125” Drill Line, new spool October 2006

5” – 4-1/2 OD Mud Bucket

55’ Rotary Hose
Triangle Pipe Racks (6) sets, (1) 42" X 30' (3) Sets 39" X 30' (2) Sets Casing Pipe Racks 10" X 30'
Upper Dog House: 7'6"W X 20'l, Lockers, Benches, Knowledge Box, New Heater And Lighting
Lower Dog House: Lockers
Electrical: Mast/Sub/Pits/ Pumps, 360 Degree Lighting, Appleton Receptacles, 208v Transformer

Currently drilling in the USA

PRICE: $5,800,000

BREWSTER N-45 DRILLING RIG (Ref#8323N)

Drawworks: Brewster N-45 S/D drawworks, 1” line, w/air controls, American catheads.

p/b Detroit Diesel 12V71 TT (650 Hp) , Allison TC-955 torque convertor, engine shed, skidded.

Geodrill Bit Sentry automatic driller.

Wireline measuring device.

Delco 30KW generator p/b Detroit 3-71 engine.

Martin-Decker weight indicator & Geolograph tong line pull gauge;

All above mtd. On 25’ L skid engine shed.

MAST: Lee C Moore 95’ cantilever mast (335,000# GNC) , Lee C Moore crown w/(3) 30” sheaves, 36” fastline, & 24” deadline sheaves, grooved F/1 1/8” line, racking board, fluorescent lights, T/A transport dolly.

Substructure-12 ft. box on box (5 ft. on 7 ft.) with 2 -7ft. X 40 ft. mud boats

10 ft. X 40 ft. water tank(new) with doghouse slide in.

16 ft. X 40 ft. folding base.

Gardner-Denver 125 ton 4 sheave block, s/n TWW12.25 w/Web Wilson 100 ton HydraHook: 2 ½”x50’ rotary hose.

ROTATING EQUIPMENT: Brewster 17 ½”x44” rotary table w/split master bushing; Skytop-Brewster 4SX swivel, 4 ¼” X 40’ sq. kelly.

MUD PUMPS: Ammerman 550 duplex mud pump, w/PD, p/b Detroit Diesel 12V71. Master skidded.

Independent mud mixer, skidded to haul on pipe tub.

WELL CONTROL EQUIPMENT: Regan 10” annular B.O.P.

HANDLING TOOLS: 2 ¼”x 72” elevator bails.

Web Wilson Type E rotary tongs w/3”-10 ¼”heads.

BJ 4 ½” RG elevator.

BJ 4 ½” RA elevator.

Mission 4 ½” Type 80 slips.

Woolley 4 ½”Type B.

Wilson 8 5/8” Type H-150 casing elevator.

Mission 8 5/8” 2-piece casing slips.

Baash-Ross 9-section drill collar safety clamp.

Mission 2-piece drill collar slips.

Mud saver bucket.

Misc. changeover & lift subs.

Misc. hand tools.

RELATED EQUIPMENT:

Vibrating hose.

Mud gun & mud pit jet.

Rat hole digger.

A-1 Shur Shot deviation instrument.

Kubota 3” water pump & hose.

Collar/pipe lay down line.

8’x 20’ round top doghouse w/6 junk box, 4-compartment, 2- section lubester, all mtd.on 46’ L mud boat.

3000 gallon fuel tank w/V-top shed mtd. on 38’ mud boat.

7 ½” x 7 ½” x 12’ water tank mtd. on 36’L pipe tub.

Center pipe tub w/2 ½”x 38’ center catwalk.

(4) 2’H x 7 ½” W x 33’L pipe tubs.

(2) 3’H x 25’L triangle pipe racks.

Mud pits(2)—5 ft.H X 8 ft.W X 32 ft. L

PIPE AND COLLARS:

Approx. 4300’ (143 jts)- 4 ½’ 16.60# drill pipe.

(18) approx. 6 ¼” OD X approx. 31’L drill collars.

Excellent working rig. – Located USA

Price: $1,950,000

BREWSTER N-35 (Ref#11222N) 5000’ capacity, single drum, mounted on 3 axle trailer, all working tools and equipment. Doghouse, (3) 45’ floats, 142 joints of drill pipe, (12) 6-1/8 drill collars, (10) 4-1/2” drill collars, 130 bbl water trailer, 7-1/4 x 14 duplex FXK Gardner Denver mud pump, 7-1/4 x 14 Duplex FD Gardner Denver mud pump, 1000 gallon diesel fuel tank, GMC winch truck, International winch truck, Regan BOP 9” with Baker closing unit, Prowler travel trailer, 645 Atlas Chalmers frontend loader and forklift combo ~~Package Price~~~~: $750,000~~ OFF MARKET

BREWSTER N-35 (Ref#11272) 3500’ depth capacity, Brewster N35 SD drawworks 350 hp and 5 speed transmission, Brewster 88’ x 125,000# mast, 12 meter long x 3.2 meter high x 2.8 meter wide substructure with 80 bbl water tank, Oilwell SA 150 ton swivel with Brewster HT50 3 sheave block, 4-1/4” square kelly and kelly bushing, 18” Brewster rotary table, Wilson 600 6-1/2 x 14 duplex mud pump and twin 671 Detroit diesel engines, (Also available 6V92T Detroit), Gardner Denver FZ-FXZ duplex mud pump with 6 cylinder diesel and PTO, 280 bbl steel mud tank with shale shaker, desander, mud hopper and GM371 diesel, cement pump, (10) 6” drill collars, (10) 4-3/4” drill collars, 3500’ of 3-1/2” drill pipe, handling tools including elevators, subs, Wilson type B tongs, Wooley type B slips, geolograph, Martin Decker weight indicator, Cameron 11” x 5000# BOP and Regan 11” x 3000# or Cameron 7” x 5000# double ram BOP and Dorland 7” x 30000# with Koomey 3-station closing unit, 40’ x 10’ portable cabin with (2) offices and bunk beds and 8’ x 4’ skid mounted driller’s office w/ 80 kva generator and fuel tank, 154 hp cement unit, located Southeast Asia Price: $890,000

BREWSTER N2 (Ref#8107N) 3000-4000’ depth, complete, V8 Detroit diesel engine, 5 speed Allison transmission, substructure mounted, 65’ x 200,000# single piece derrick, Gardner Denver FXK 7-1/2 x 14” mud pump twin 671 Detroit, 1000’ of 3-1/2” x 31’ pipe, tongs, weight indicator, substructure 40’ L x 20’ W x 5’ H, 16” rotary in substructure, (5)drill collars, kelly andkelly bushing, 50 ton hook/block, 4 loads Price: $145,000

BREWSTER SWAB RIG (Ref#7425N) Single drum Brewster drawworks with air coutches and 12,000’ of 5/8” sandline, Franks 52’ hydraulically raised mast, 471 Detroit diesel on deck, Mountedon 1973 Mack tandem axle truck with 7-11 Mack diesel engine, Fleet crown wide sheave, double oil savers

Price: $90,000

Rig runs and is complete and ready for use.

SKYTOP BREWSTER H328 (Ref#15332) Single drum, 54’ X 125,000# mast (can easily handle double random casing), Skytop H328 drawworks with Wichita air clutch and (2) 32” x 8” brake drums with 7/8” grooved spool, 18” GEFCO rotary table, large working floor, (2) King HD100 hydraulic utility winches, SOWA 3-sheave travelling block, Packer weight indicator, King 25XV swivel, hydraulic breakout cylinder, live cathead, Webb Wilson breakout tongs, mounted on 4 axle Crane Carrier, powered by 6V71 Detroit diesel engine, 3 speed Allison transmission, torque converter. 7-1/4” x 10” Gardner Denver mud pump with 671 Detroit diesel engine, 8’ x 20’ doghouse on skids, complete package, ready to work Price: $350,000

SKYTOP WORKOVER PACKAGE (Ref#7133) Manufactured 1981, double drum, 38 x 8 drawworks, 202 Parmac brake, Hendrickson 5 axle back-in carrier powered by 8V71 Detroit diesel with 5860 Allison transmission, Pengo 96’ x 225,000# mast, 5 x 8 Gardner Denver duplex mud pump powered by 471 Detroit diesel, 150 bbl mud tank w/ 24 bbl cement mixer mounted on 38’ drop deck trailer, 700,000# capacity, hydraulic casing jack powered by 471 Detroit diesel with 4-1/2 - 7-5/8 casing elevator and slips and (2) slip bowls mounted on shopmade float with a KW truck. Currently working Off market