SUN MACHINERY CORP.

Call: 516-536-7375 /  516-536-7317 fax

rigs@sunmachinery.com

 

Portadrill

 

     

 

PORTADRILL RVT (Ref#15714)  Manufactured 1977, PTO, mounted on Dodge twin screw with Detroit engine, Sullair 375/125 compressor, mud pump, standard mast, 1 front 2 rear hydraulic leveling jacks, good condition, currently drilling, Price: $150,000. 300’ pipe available at additional cost.

 

PORTADRILL RV6 REVERSE CIRCULATION RIG  (Ref#779N)  375/150 Atlas Copco air compressor, standard mast and pullback, mounted on 1978 Ford 9000 truck with diesel engine, PTO, all tools, 700’ of RC drill pipe, excellent condition  Price:  $270,000

 

PORTADRILL RV6  (Ref#15628) reverse circulation rig, rebuilt one year ago, 471 Detroit engine, air controls, 49’ derrick, 31” opening rotary table, 6” x 24’ kelly, 6” ID King swivel, 6” ID air swivel, mounted on 5th wheel transcraft 45’  trailer, 4 hydraulic leveling jacks, (2) telescoping outrigger stabilizers, no vacuum pump (runs on outside air)  Price:  $195,000

 

PORTADRILL RV6  (Ref#15632N)  Completely Rebuilt.  Reverse circulation, Duetz diesel deck engine, 4 cyl Ford diesel engine to power Gorman centrifugal mud ump, mounted on 1979 GMC General w/350 Cummins engine, stationary table, converted to 8” kelly, 200-300’ of 8” flanged pipe, 600’ of 6” pipe, fuly tooled, 800/125 compressor on trailer  Price:  $200,000

 

PORTADRILL TKS  (Ref#8419N)  Manufactured 1979, 750/250 Sullair air compressor, 8V92 Detroit (recently overhauled), mounted on 1979 International 6 wheel drive truck with Detroit 466 diesel engine, 80,000 miles, all hydrostats, no leaks, 41’ mast, 8” retractable table, 4-1/2” fluted kelly, 3 hydraulic jacks, 20’ rod rack, low hours, 3 x 4 Mission pump, 2 cycle Bean injection, hammer oiler, no pipe  Price:  $120,000  reduced to $90,000

 

PORTADRILL TKS  (Ref#9634Na)  Manufactured 1979, Sullair 900/350 air compressor, no mud pump, mounted on 1978 Paystar 5000 truck with 8V92 Detroit engine, 7-1/2” retractable rotary table, 4-1/2” kelly, brand new swivel, Bean water injection pump, line oiler, new paint, rod rack, 3 hydraulic leveling jacks, good condition, currently drilling  Price:  $115,000

Pipe available at extra cost.

 

PORTADRILL TKS  (Ref#9634Na)  Manufactured 1979, 1988 Sullair 900/350 air compressor, Detroit 8V92, new swivel, Bean pump, oiler, 7-1/2” table, mounted on 1978 Paystar 5000, ready to work, new paint  Price:  $115,000

 

PORTADRILL TKT PROSPECTOR (ref#8756N)  Manufactured 1983, mounted on 1980 Kenworth C500 chassis 4-axle, 7 x 10 mud pump, air compressor, 33’ kelly, 40’ mud tank shaker, drill collar, 2050’ pipe, stabilizers, bits, tools and accessories  Price:  $510,000  Price Reduced:  $380,000

 

PORTADRILL TKT  (Ref#1475N)  Manufactured 1979, 500/250 LeRoi air compressor, Gardner Denver 6 x 8 mud pump, 53’ mast with racking board, mounted on 1979 International Paystar 5000 truck, 6V92 Detroit motor 1200 hours, reworked before being put into use.  Can drill to 4500’ with the Emsco D300 pump.  Price:  $300,000

EMSCO D300 MUD PUMP 7 X 14  (Ref#1475Nb)  Series 60 Detroit power, mounted on 2008 tandem axle drop deck trailer, 500 gallon fuel tank, pintle hitch, 4 x 4 Honda trash pump, 10’ wide x 30’ long with welder

Additional equipment:

1978 KW VAC TRUCK  (Ref#1475Nc)  90 bbl 400 Cummins RTO 13 transmission new Masport pump - $44,000

1987 INTERNATIONAL WATER TRUCK (Ref#1475Nd) 2800 gallon square tank, Rosewall grouter, new rubber, 400 Cummins RTO 13 tansmission - $35,000

2008 TANDEM AXLE DUAL PIPE TRAILER  (Ref#1475Ne)  - $20,000

1981 FORD 9000 PIPE TRUCK  (Ref#1475Nf)  671 Detroit, RTO transmission - $25,000

95 jts of 4-1/2” 16.60 lb flush joint pipe 2-7/8 IF 20’ joints - $30 per foot

(1) 4-1/2” x 20’ drill collar with float 4FR float, 2-7/8 IF - $2,000

(4) 4-1/2” drill collars – 22.75’, 21.53’, 21.51’, 21.49’, 2-7/8 IF - $2,000

(1) 2-7/8 IF x 3-1/2 reg bit sub - $400

(1) 2-7/8 IF x 4-1/2 reg bit sub - $400

(1) 2-7/8 IF x 6-5/8 reg bit sub - $400

(94 jts) of 2-7/8 pipe with wrench slots, 2-3/8 Mayhew full hole, all double white banded, 20’ joints - $25 per foot

Washington diverter head - $15,000

Asst. slip plates for casing 9-5/8”, 8-5/8”, 7”, 4-1/2” and 3-1/2” - $1,400

4 drill pipe slips - $400

8-3/4” near bit reamer - $4,500

Rauch Mod 512B pipe spinner 2-7/8, 7-1/2” air close hyd spin - $6,400

 

PORTADRILL TKT  (Ref#1971N)  Manufactured 1978, 2000’ depth capacity,  6V92 Detroit diesel engine, PTO driven, 15 gpm water injection, 256 S2 LeRoi air compressor (needs work), 53’ mast (to run Range III casing), 7-1/2” retractable table, 4-1/2” x 24’ kelly, no mud pump, mounted on Kenworth truck, no pipe, hydraulic leveling jacks, running condition  Price:  $85,000

 

PORTADRILL TKT PROSPECTOR  (Ref#317N)  53’ mast on triable Kenworth 5000 truck, GD-FXX mud pump, 5,600’ of 3-1/2” Range 2 Double White Band drill pipe, 1984 Mack winch truck and 30’ drill pipe trailer, cleaned, painted and reworked   Price:  $250,000

 

PORTADRILL TKT (Ref#417N) Manufactured 1976, PTO, mounted on International Paystar 5000 with rebuilt 350 Cummins engine, 6 x 8 Gardner Denver mud pump, 256S2 Leroi compressor, Bean water injection, 7 ½” retractable table, 53’ hydraulically raised mast, hydraulic pulldown, hydrostatic, breakout tongs, 4 ½” hex Kelly (fluted available) no pipe rack or rod box  Price:  $245,000

Pipe avail-neg $$

 

PORTADRILL TKT (Ref#8281N)  Manufactured 1978, Triple drum, 5-1/2” x 8” Gardner Denver duplex mud pump, LeRoi 256 S2 450/250 air compressor, 53’ x 60,000# hydraulic raised mast, Racking board, Mounted on 1978 Kenworth tandem axle truck with 8V92 Detroit diesel and PTO, 4 hydraulic leveling jacks and 2 rear screw jacks, Hydrostatic DW, Water injection, 8” retractable rotary table, Price: $145,000

Also available at extra cost: 2000’ of 3-1/2” x 20’ drill pipe and additional rebuilt compressor

 

PORTADRILL TKS  (Ref#9222)  Manufactured 1978, 8V92 Detroit deck engine, Gardner Denver 5 x 6 mud pump (air driven), 750/250 Sullair air compressor, mounted on 1978 International Paystar 5000 with 350 Cummins, tools

SMEAL 5T, manufactured 1985, sandreel, remote pipe racks, utility bed, mounted on Ford F350 w/460 gas

CHEVY C60 FLATBED TRUCK, 1200 gal water tank, 500 gal fuel tank, transfer pump

Package Price:  $100,000

 

PORTADRILL TKS  (Ref#1030N)  Manufactured 1977, 750/250 air compressor, 4-1/2” x 23’ kelly, 8-1/2” retractable table, 8V92T Detroit diesel engine on deck, Wilden mud pump, mounted on 1974 International Paystar 5000 tandem axle truck with 270 Cummins diesel engine, 800’ of 4-1/2” x 15’ drill pipe, 300’ held in rod box, handling tools, currently drilling  Price:  $80,000

 

PORTADRILL TKT  (Ref#952N)  Manufactured 1977, no air compressor, 8V92T Detroit diesel deck engine, 5 x 8 Gardner Denvermud pump, mounted on International Paystar 5000 truck, 38’ mast, 45,000# pullback, sandreel, 8-1/2” retractable rotary table, 4-1/2” x 23’ kelly bar, no pipe, doghouse, geolograph  Price:  $65,000

 

PORTADRILL TKT  (Ref#14270)  1976, triple drum, 53’ x 75,000# hydraulically raised mast, new 4-1/2” kelly, mounted on triple axle rear 1981 Kenworth truck powered by 6V92TAC diesel engine, 2,130’ of 3-1/2” drill pipe, (6) 4-1/8” spiral collar, fuel tank, handling tools  Off Market

 

PORTADRILL TKT  (Ref#4950)  Manufactured 1978, Double Drum, Mounted on Paystar 5000 with 6V71 Detroit diesel, 53’ x 80,000# mast, Cummins 350 diesel on deck, Kelly retracts to handle casing, 33’ x 4-1/4”fluted kelly, 2000’ of 3-1/2” x 30’ drill pipe, (10) 4-1/2” x 30’ collars, Handling tools, geolograph, junk box,  6 x 12” Oilwell duplex mud pump, powered by 6V71 Detroit on trailer, Pipe slide on trailer, Doghouse on trailer    Off market

 

PORTADRILL TKT  (Ref#15418)  Manufactured 1976, depth capacity 1800’, mounted on 1975 International 5000 truck, (1) LeRoi 253-S2 (750/250) air compressor and  (1) LeRoi 256-S2 (500/250) air compressor on gooseneck trailer:  total 1250 cfm/250 psi, 6V92 Detroit engine (rebuilt, 300 hours), 400 hp PTO, pipe box, 5/8” cable, rated at 40,000#, Bean water injection, 3 leveling jacks, 7-1/2” Gardner Denver retractable rotary table,  1000’ of 4-1/2” x 15’ pipe, fully equipped, stabilizers, tools, hammers

Tandem axle trailer mounted mud handling system: Gaso 5 x 10 duplex mud pump produces 320 gpm @ 330 psi, (3) desanders, hydraulic powered pickup pump and a 1000 gallon tank, (2) 6V71 Detroit diesels with (2) hydraulic pumps to power shakerand the mud pickup pump

Price:  $175,000

 

PORTADRILL 10 TKT  (Ref#1236N)  Manufactured 1974, 5-1/2 x 8 Gardner Denver mud pump, 256 LeRoi air compressor, 7-1/2” retractable table, mechanical clutches, pulldown, 4-1/2” x 23’ kelly (mast is set up for 30’ kelly), mounted on International Paystar 5000 truck with Detroit 8V71 engine, PTO, pipe spinner, breakout tongs, water injection pump, 3 hydraluc leveling jacks, good condition, currently drilling  Price:  $170,000

Pipe available at extra cost.

 

PORTADRILL  (Ref#12632N)  750/350 air compressor, 5-1/2 x 8 Gardner Denver mud pump, 44’ mast, 1600’ pipe, mounted on 1978 Kenworth truck, Detroit diesel engine, PTO   Price on Request

 

PORTADRILL 10TK  (Ref#14542)  Manufactured 1978, Detroit Silver 92V6 deck engine, 7-1/4 x 12 Gardner Denver mud pump, extended derrick, 3 drums, sandline, new 7-1/4” retractable tble, geolograph, 2 drill collars, subs, core barrel, tools, 1600’ (300’ new) of 2-7/8” x 20’ drill pipe on trailer, good condition  Price:  $175,000  OFF MARKET

 

PORTADRILL 10TK  (Ref#13448)  Manufactured 1978, LeRoi 256S2 air compressor, Detroit 8V71 deck engine, Mounted on 1961 Peterbilt, 3 x 4 centrifugal pump, good condition  Price:  $75,000

 

PORTADRILL 10TK (Ref#8741Nb) Manufactured late 1960’s, PTO, mounted on 1969 White with gas engine  Price:  $75,000

Pipe available at additional cost

 

PORTADRILL 10TK  (Ref#14681Na)  Atlas Copco 425/120 air compressor, 6V71 Detroit diesel on deck, Mission 3 x 4 pump, hydrostatic drawworks, Bean water injection pump, line oiler, 4-1/2” kelly, 8” retractable table, mounted on 1972 International tandem axle truck with diesel engine, one owner rig, well maintained, bare rig  Price:  $95,000

 

PORTADRILL T10 (Ref#1954Nb)  Trailer mounted, 56’ x 125,000# hydraulically raised mast, 12” Ideco table, 471 Detroit diesel, 7-1/2 x 10” duplex mud pump, 50 ton swivel, 1300’of 4-1/2” x 31’ bottleneck drill pipe, Drilled (4) 24” wells, Located Central America  Price:  $190,000

 

PORTADRILL 10TG  (Ref#10553)  Manufactured 1973, Atlas Copco DT4 125/600 air compressor, Detroit 671 deck engine, mounted on Crane Carrier with new 501 motor, brakes and drums.  Currently drilling, 180’ drill pipe  Price:  $35,000

 

PORTADRILL 10TG  (Ref#6027)  Manufactured 1969, 500/125 air compressor, 3 x 4 Mission, 6V71 Detroit on deck, mounted on 1973 3-axle Diamond Rio with Detroit diesel, 7” retractable rotary table, injection pump, mud pit, 500’ of 3-1/2” pipe, 21’ kelly  Price:  $50,000

 

PORTADRILL 10TG  (Ref#1232N)  Manufactured 1968, 600/125 air compressor, 3 x 4 centrifugal pump, Detroit 6V71 diesel deck engine, rig and deck engine completely rebuilt, mounted on 1979 Peterbilt truck with diesel engine – Price rig only:  $105,000

800’ of new 3-1/2” IF drill pipe.

1986 Kenworth 1500 gal Flatwater truck

Tandem axle mud tank w/shaker

20K pintel hitch tilt trailer

Ford 555D backhoe w/extend boom

Package Price:  $175,000

 

PORTADRILL 10TG  (ref#8993)  Manufactured 1966, 3x4 centrifugal mud pump, 525/120 Atlas Copco air compressor, 23’ kelly, retractable rotary table (3 yrs old), 6V71 Detroit diesel deck engine (rebuilt), Bean injection pump, mounted on 1966 International tandem axle truckwith 549 V8 gas engine, 5 x 3 transmission, less than 35000 miles, (15) 4-1/2” x 15’ w/2-7/8 IF connections, 17’ collar  Price:  $65,000  -  extra equipment available for extra cost.

 

PORTADRILL 10TG  (Ref#4132)  Manufactured 1966, 400/250 air compressor, 6V71 Detroit on deck, 7-1/2” retractable table, 18’ kelly, table and drawworks rebuilt in 1990, 225’ of 4-1/2” x 15’ drill pipe, all tools, Mounted on 1965 International 190 with 671 Detroit engine, mast sandblasted and painted, rig primed, Good condition         Price:  $23,000

 

PORTADRILL 10TG  (Ref#2265Nb)  Mounted on Foremost Tracks, Becker CRS 1000 head, rated at 60,000 torque, 90,000 pull up, incorporates rotary table with 20” opening for setting casing, combination unit for drilling wieght air or mud, other rig set ups are available, 600/150 air compressor (does not work)  Price:  $30,000

 

PORTADRILL 10TE (Ref#4397N) mounted on 1970 Army 6x6 with rebuilt Cummins diesel engine, 7” stationary table, 23’ Kelly, no pulldown, mechanical clutches, 5 x 6 Gardner Denver, air compressor, swivel, breakout wrench, 1 front & 2 rear hydraulic leveling jacks, no pipe available  Price:  $45,000

 

PORTADRILL 524  (Ref#5019N)  completely rebuilt, new Little Giant swivel, 10 new tires, rebuilt retractable table (7-1/2 – 8-1/2), 5 x 6 Gardner Denver mud pump rebuilt gear end and fluid end, no air, 3-1/2” fluted kelly, rebult derrick cylinders and rear jacks, new hydraulic pump and hoses, mounted on 1974 International , 8V71 T Detroit diesel, 13 speed transmission, hydraulic pulldown, mjechanical clutches, portable mud tank, breakout tongs, 500’ of 2-7/8” x 20’ drill pipe, no tools  Price:  $130,000

 

PORTADRILL 524  (Ref#1721N)  Manufactured 1980, 5 x 6 Gardner Denver mud pump, Atlas Copco 600/150 air compressor, 8-1/2” retractable table, 23’6” kelly, 40,000# pullback, water injection, hammer oiler, sandline, hydraulic jacks, mounted on Ford 9000 truck with Detroit 8V92 (350 hp) diesel engine, 200’ of 2-7/8” x 20’ dril pipe  Price:  $60,000

 

PORTADRILL 524 (Ref#757N) Manufactured 1979, fully overhauled, PTO, mounted on 1996 Kenworth with Cummins engine, 5 ½ x 8 mud pump, Leroi 256S2 air compressor, 4 hydraulic leveling jacks  Price:  $280,000

 

PORTADRILL 524  (Ref#5441N)  Manufactured 1978, 5 x 6 Gardner Denver mud pump, 500/125 air compressor, mounted on 1978 International 1800 Loadstar with 466 gas, 7-1/2” retractable table, 3-1/2 x 24’ kelly, mechanical clutches, hydraulic pulldown, 300’ of 3-1/2” x 15’ drill pipe  Price:  $75,000

Available at extra cost: 300’ of 3-1/2” x 15’ rod

 

PORTADRILL 524-3A  (Ref#2035Na)  Manufactured 1978, mounted on 1998 Ford 3-axle rear Louisville powered by N14 Cummins 500 hp engine, 5-1/2 x 8 duplex mud pump, 530/250 air compressor, 20 gpm water injection pump, new swivel 2-1/2”, new kelly 3-3/4” x 24’, new 8” retractable rotary table, new pipe slide, new hydrostatic and hydraulic pumps, 4 hyd leveling jacks,   Price:  $200,000

Also available:  Kenworth Water truck, 3500 gallon Flatwater Fleet tank, 3 rear axle

 

PORTADRILL 524  (Ref#11522N)  Manufactured 1979, 7-1/2 x 8 Gardner Denver mud pump, drilling air, 5-1/4” retractable table, 3-1/2” kelly, pulldown, air clutches, mounted on 1979 International Paystar 5000 truck with new engine, 3 hydraulic leveling jacks, standard mast and pullback, 400-500’ of 3-1/2” x 20’ drill pipe, good condition, currently drilling  Price:  $120,000

 

PORTADRILL 524  (Ref#2357N)  Manufactured 1975, mounted on 1975 International Paystar 5000 with 6V71 Detroit engine, PTO, 5 x 6 Gardner Denver mud pump, Worthington developmental air compressor, 7-1/2” retractable table, 23’ x 3-1/4” kelly, pulldown, mechanical clutches, sandline, 240’ of 2-7/8” x 20’ drill pipe, good condition, currently drilling  Price:  $80,000

 

PORTADRILL 524  (Ref#4645N)  Manufactured 1974, mounted on 1974 Ford L8000 tandem axle truck with Cat 1160 engine, PTO, 5 x 6 GD mud pump (rebuilt), Atlas Copco air compressor, 24’ kelly, 5-1/4” retractable table, Bean water injection, 44,000# pullback, hydraulic pulldown (w/new hydraulic pump), mechanical clutches, hoisting plug, sandline, breakout wrench, 5” x 18’ stabilizer, mud tank, bits, subs, tools, etc., 300’ of 4-1/2” x 20’ drill pipe, good condition, ready to drill  Price:  $85,000

 

PORTADRILL 524 (Ref#6199Nc) Manufactured 1973, PTO, Cat 3208 engine in carrier, Gardner Denver 5 x 6 mud pump, good rubber, new paint  Price:  $65,000

 

PORTADRILL 524  (Ref#5789N)  Manufactured 1973, semi-trailer mounted, Detroit 6 cylinder diesel engine, compressor needs work, 5 x 6 mud pump,  Price:  $75,000

 

PORTADRILL 524  (Ref#12565)  diesel engine, air compressor, mud pump, 3 drums, 3 jacks, monkey board  Price:  $60,000

 

PORTADRILL 522  (Ref#1135N)  Manufactured 1971, mounted on 1984 Autocar with Detroit engine, new 3-1/2” kelly, 5-1/2 x 8 Gardner Denver mud pump, rebuilt gear box, winch, new turntable, 7-1/2” retractable table, pulldown, mechanical clutches, 600’ of 3-1/2” x 20’ drill pie, bits, subs, etc  Price:  $95,000

 

PORTADRILL 521  (Ref#1646N)  5-1/4” retractable table, 24’ kelly, 5 x 6 Gardner Denver mud pump, 30,000# pulldown, mounted on 1988 International truck 365 hp engine, PTO, 1 front 2 rear hydraulic leveling jacks, 350’ drill pipe 2-7/8 FEDP, good condition

1979 1200 gal water truck    Price  $95,000

 

PORTDRILL 521  (Ref#3420N)  Double drum, mechanical clutches, cathead, swab drum, 900’ of 3/8” cable, 5 x 6 Gardner Denver duplex mud pump, 48’ mast includes extension section, 23’ kelly, mounted on Mack tandem axle truck with Mack diesel engine, 4 hydraulic leveling jacks, Cummins 220 hp diesel on deck, 7-1/2” retractable rotary table to 10” opening, 1000’ of 2-3/8” x 20’ Mayhew Jr. drill pipe  Price:  $85,000

 

PORTADRILL 521  (Ref#3784N)  Retractable table, hydraulic pulldown, 5 x 6 Gardner Denver, 300’ FEDP, (1) collar, mounted on 1987 Ford 8000 truck.

1000 gooseneck water trailer

Pipe trailer

Package Price:  $70,000

 

PORTADRILL 521  (Ref#1746N)  600/150 Gardner Denver air compressor, 5 x 6 Gardner Denver mud pump, mounted on 1983 Ford 9000 tandem axle truck with Cat engine, PTO, 25’ kelly, 7-1/2” retractable table, mechanical clutches, hydraulic pulldown, breakout tongs, 2-1/2” Little Giant swivel, 18 gpm Bean water injection, 3 hyd leveling jacks, 500’ of 2-7/8” x 20’ drill pipe, 6” HD Mission hammer, bits, subs, etc., good condition, currently drilling  Price:  $87,000

 

PORTADRILL 521  (Ref#13335N)  Manufactured 1974, trailer mounted, 5 x 6 Wheatly mud pump, 671 Detroit diesel engine, 7-1/2” retractable rotary table, 3-1/2” x 23’ kelly, cathead, mechanical clutches, 300’ of 2-3/8 Mayhew reg. pipe, currently drilling  Price:  $105,000

 

PORTADRILL 520  (Ref#2058)  Manufactured 1978, 5-1/2" x 8" GD mud pump, Mounted on Ford 8000 with 3208 Cat (rebuilt with 1000 hours), 3 hydraulic leveling jacks, 40’ mast, 4-1/2” x 23’ kelly and kelly bushing, 6” rotary table, retactable 18” opening, Rod box, all handling tools (wrenches, subs, pipe lifting subs), 1000' drill pipe           Off Market

 

PORTADRILL 505  (Ref#5159)  Triple drum, 5 x 8 Gardner Denver pump, compressor requires repairs, sandline, 23-1/2’ kelly, 7-1/2” rotary table, mounted on Brockway truck w/671 Detrit diesel  Price:  $50,000

 

PORTADRILL 504  (Ref#13484N)  Manufactured 1969, mounted on 1969 GMC twin screw truck, 6 cylinder gas engine, 250 cfm Wabco aircompressor, 5 x 8 Gardner Denver mud pump, 460’ of 2-3/8 IF drill pipe, no tools  Price:  $70,000

 

PORTADRILL 504  (Ref#3834N)  5 x 6 Gardner Denver mud pump, 600 Atlas Copco air compressor, 8-1/2” retractable table, sandline, hydraulic jacks, drill rods, mounted on 9000 Ford Louisville truck  Price:  $80,000

 

PORTADRILL 502  (Ref#6028)  Manufactured 1969, Double Drum, 292 gas, 3 x 4 Mission, no air, 5” non-retractable rotary table, mounted on 3 axle White truck with gas  Price:  $65,000

 

PORTADRILL 502  (Ref#11604)  Manufactured 1955, mounted on International R190 truck w/6 cyl OHV engine, single axle, 5 x 8 Gardner Denver mud pump, 35’ mast, 25’ kelly, hydraulic pulldown  Price:  $35,000

 

PORTADRILL 501  (Ref#12980)  1985 International single axle truck with 9 ltr diesel engine, PTO, developmental air compressor, 5 x 6 Gardner Denver friction clutch.

1985 Ford water truck, 1000 gal tank, single axle

500’ of 2-3/8” x 15’ drill pipe

Shot made pulling unit on 1985 F600 single axle truck

Price on Request

 

PORTADRILL 501  (Ref#2265Nc)  Manufactured 1965, trailer mounted 5 x 8 Gardner Denver mud pump, 200’ of drill steel  Price:  $40,000

 

PORTADRILL 501  (Ref#15432)  Manufactured 1957, mounted on 1955 International single axle truck with 6 cyl gas engine, PTO, 17’ kelly, custom made derrick, 4 x 5 mud pump  Price:  $35,000

 

PORTADRILL  (Ref#9416)  4 x 5 GD mud pump, 600 cfm air compresosr, 3” kelly, 400’ of 2-7/8” x 20’ drill pipe and also approx 400’ of 2-3/8” drill pipe, 4” 8” and 12” drill collar, mounted on old truck, many extras  Price:  $40,000

 

PORTADRILL 1500  (Ref#270N)  1500’ capacity, Manufactured 1970, double drum drawworks with sandreel, 42’ one-piece mast, 2 tongs to brake out, portadrill swivel, 2 travelling blocks, mechanical clutches, Gardner Denver FD-FXX 5-1/2 x 8 mud pump, 10” Gardner Denver RT-10 rotary table, double drum, 22,000# capacity (4 lines), 5/8” cable, winches, mounted on 1985 International 3 axle truck with GMC 671, 3 hydraulic leveling jacks, Located Mexico   Price delivred to Texas border:  $145,000

 

Tel:  516-536-7375          Fax:  516-536-7317         rigs@sunmachinery.com