SUN MACHINERY CORP

SUN MACHINERY CORP

Telephone: (516) 536 7375 Fax: (516) 536 7317

These rigs are located at various locations through out the USA and Internationally.

OILWELL E3000 PLATFORM RIG (Ref#10946)

Rig: 2000 hp, Oilwell E3000 drawworks w/Baylor 7838 Hydramatic brake, DSI 160’ x 30’ x 30’ 1,100,000# mast, (4) Cat D399 engines (4700 hp), (4) Kato 1050 kw generators, Ross Hill 1500 750DC SCR system, Brandt OG-5 degasser, (3) Brandt ATL-CS cascade system, Regan KFDJ 2000 psi diverter, Shaffer annular 13-5/8” 5000 psi, Cameron Type U double ram 13-5/8” 10,000 psi, Cameron Type U single rame 13-5/8” 10,000 psi, FMC Linkbelt Model 108 crane and 1 Dreco crane, (2) Oilwell A1700 PT Triplex mud pumps powered by GE 752 1000 hp electric motor, Oilwell 375 (37-1/2”) rotary table w/independent electric drive, 3-1/16” 15,000 psi choke manifold w/(2) Cameron H2 positive chokes and (2) Swaco super chokes, computerized flow indicator, (2) Mission Magnum 5 x 6 centrifugal mud mixing pumps.

Storage: 500 bbl drilling water, 1574 bbl liquid mud, 4758 cu ft bulk mud and cement, 500 bbl fuel oil, 500 bbl potable water

Support: S-61 heliport 52 x 62’, 19000 gross lb., Sewage treatment Omni-pure 12 mx 7500 gpd, Quarters bunks for 56 people, galley for 18 people.

Price Open

JACK UP BARGE (Ref#7255N)

1-WORKING PLATFORM

1-1 LOWER HULL ( CATAMARAN-TYPE ) L/B/D 70.O/8.0/5.5

OUTER WIDTH BETWEEN LOWER HULLS 38.0M / DRAFT 4.0M

1-2.UPPER HULL L/B/D =8.0/38.0/3.5M

1-3.CENTER OPENING L/B 44.0/22.0M

1-4.SPACE BETWEEN COLUMN-WELLS 52.0X 30.0M

2-COLUMN DIA 2.2M X LENGTH 77M X 4 PCS

3-ELEVATING DEVICE

TYPE-MITSUI TAPERED-RING GRIPPING TYPE JACK

MAX THRUST - 1,200T X 4

MAX HOLD - 1,400T X 4

PLATFORM LIFTING SPEED - 10M/H

COLUMN LIFTING SPEED -20M/H

COLUMN DROPPING - FREE FALL MECHANISM OF COLUMN

4-MOTIVE POWER

4-1 DIESEL ENGINE

MAIN GENERATOR - 220 PS X 1200 RPM X 2 SET

AUXILIARY GENERATOR - 49 PS X 1,800 RPM X 1 SET

HYDRAULIC POWER UNIT - 500 PS X 750 RPM X 4 SETS

4-2 POWER UNIT

MAIN HYDRAULIC PUMP FOR JACK

-240KG/CM2 X 470L/min x 1,050 rpm x 215 kw x 4 units

aux hydraulic pump for jack

- 140 kg/cm2 x 235l/min x 1,050 rpm x 67 kw x 4 units

hydraulic pump for winch

-193 kg/cm2 x 420/117 L /min x 850 rpm x 53 kw x 8 units

4-3 MOORING WINCH - 8 units

4-4 TRAVELLER

Type - double girder single body

Dimension 23.4m x 23.3m

Travelling system -hydraulic cylinder pin

Travelling Load -960 ton

Max travelling Distance - 17.0 meter

Built; 1972 -01-24.. Mitsui Shipyard ,Japan
Crew 6person / Workman 12 Total 18 Person
If More Necessary During Working Accomodation
Container Onboard Or Some Modification For Increase
Accomodation Space .

PRICE: $3,500,000 - Located Southeast Asia

4-LEG JACK UP UNIT (Ref#36N) – Buy components or complete package

Dimensions: 224’ x 200’ x 25’

Lengths (4): 324’ long triangular

Jacking system

Mud, oil, brine and bulk material storage

13-5/8” x 5000# Hydraill BOP and diverter system

50 ton 100’ boom crane

80 persons quarters

160’ x 30’ derrick, with a static hook load capacity of 1,000,000 lbs with 12 lines (1-3/8” drilling line)

Continental Emsco C-2, 2000 hp driven by (2) GE 752 DC motors, complete with Baylor 6032 electric brake

National C375 rotary table, hydraulic chain driven from drawworks rotary countershaft

Varco Model TDS-4S 650 ton top drive, with closed loop cooling system and PH85 pipehandler, rated to 45,500 ft/lbs continuous drilling torque

Varco AR 3200 iron roughneck pipe handling system

(3) Emsco FB1600 (1600 hp) triplex pumps, each driven by (2) GE 752 DC traction motors

(4) Thule VSM-100 and (1) Thule VSM-300 linear motion shale shakers

Power equipment:

DC: (5) Ross Hill SCR units, each rated at 1400 amps, powering (9) GE 752 DC motors

AC: (8) Cat D398 diesel engines, 912 hp, driven (8) Kato 1,287 kva generators

Available on Make Offer Basis

Located Europe

JACK UP DRILLING/CORING RIG (Ref#9587) operates in 80’ of water, composed of (6) 10’ x 40’ x 7’H FlexiFloats and (4) 10’ x 20’ x 7’ H Flexifloats, (4) spuds, (4) 80’ legs 3’ dia x 40’ long. Currently on the platform is a Gardner Denver mud rig used for drilling and core samples. Another type of rig such as a Mobile, Acker or CME could be placed on jack up. Currently working. Offered on rental basis: $40,000 per month. Will sell for $1,100,000