Below is a list of some of the used & new
drilling rigs, support equipment and Joy WB14 booster for production and
drilling. Additional information is available upon
request and you may view many of the rigs on our website.
Sun looks forward to hearing from you and be
advised that we are continuously interested in any drilling or workover
equipment that you have for sale.
JOY BOOSTER WB14 (Ref#2188N)Rebuilt (test
hours only) rebuilt by internationally known rebuilder
Model JR-500
Joy WB14 frame and cylinders
rebuilt to specifications, Cummins KTA 575 hp engine rebuilt to specifications.
Input: 1800 cfm/350 psi
Output: 1800 cfm/1500 psi
Cylinder sizes:
§(2) on
first stage: 3-3/4 x 7 and 3-3/4 x 7
§Second
stage: 3-3/4 x 7
§Third
stage: 3-3/4 x 7
New skid, coolers, pressure
scrubbers and all parts in booster. New R.J. Link complete gear reduction
transmission 3:1 ratio, anti engine rotation, with pump and clutch assembly,
gear reduction. Ambient working range 130 degrees Fahrenheit. Completely
rebuilt with new and rebuilt parts. Reworked and fabricated to new condition.
Dimensions/weight 28L x 8W x 7H, 36,000#. 100 hour test run performance data
available.
Located at the rebuilder's factory in
Pennsylvania, USA. Any modifications can be performed on the booster and
additional test runs can be done.
Price: $150,000 - or
best offer
This booster was engineered,
rebuilt and assembled for an international user who never took delivery. It was
remanufactured by a major US manufacturer/rebuilder that specializes in
compressors and boosters.
The button links below will open video player on your
computer:
Air Hoists: (1) air motor 10,000#, (1) Ingersoll Rand
10,000#
Tongs
Casing Stabbing Board
Pine Spinners: Gray Mark 10
Derrick accessories: ladder, standpipe, tong counter
weights, racking board, Geronimo line, lights in derrick and rig floor
Lifting and Drilling Equipment:
Drawworks skid 27 x 9.25, power skid 27 x 10, Model
OIME E-3000 3000hp, Elmagco 7838 Electric aux brake, drillers console,
Crown-o-Matic, (3) EMD D79 electric traction motors, Foster catheads
1-1/2 drilling line, drilling line spool
Ideco 750 ton travelling block
BJ Dyna-Plex 750 ton hook
Continental Emsco LB650 650 ton swivel
Ideco LR-375 rotary table, 37-1/2 opening, master
bushing, kelly bushing
650 ton x 144 elevator links
International Tool Company kelly spinner
High Pressure System
Mud pump:
Continental Emsco FB-1600, 1600 hp triplex, (2) GE 753 DC
electric motors
Continental Emsco FB-1600, 1600 hp triplex, (2) EMD D79
electric motors
Gardner Denver PZ-10, 1350 hp, power GE 752
Charger Pump: (3) 6 x 5 x 11 w/75 hp electric motors
Standpipe manifold
Low Pressure System
Shale tank: 570 bbl, 40 x 12
Intermediate tank: 570 bbl, 40 x 12
Suction tank: 570 bbl, 40 x 12
Trip tank: 130 bbl
Premix pit: 100 bbl
Solids Control Equipment:
(2) Derrick L148 flo-line linear motion
(2) Mission Magnum 5 x 6 75hp centrifugals
Desander: Totco (2) 12 cones
Desilter: Total (12) 4 cones
Degasser: Swaco vacuum
Pit Stirrers: (5) 10 hp stirrers
Mud Mixing Pumps: (3) Mission Magnum 5 x 6 100hp
centrifugals
Water tanks: (1) 500 bbl 43 l x 10 w rectangular.
(1) 500 bbl 35L x 10.5 dia cylindrical.
20,000 gal diesel tank, 43 x 10
Mud/gas separator: 26 x 8 x 72 diameter
Power System
(3) Cat D399TA diesel engines
(3) KATO 1000 kw generators
(1) Gardner Denver 30 hp air compressor
(1) Sullivan Palantek 50 dg air compressor
(1) Quincey 4-cylinder air compressor
Power Systems Houses
(1) Ross Hill 1600 SCR house ()48 x 11.5)
(3) Genertor House (43 x 12)
(1) Air compressor house (43 x 10)
Doghouses:
45L x 10W, Matheny Explorer 1600 Surveyros
Off driller side house: 45L x 10W
Junk baskets, mud house, rig managers house, parts
houses, change house, power washer, 3x2x13 centrifugal pump, 30 hp electric
motor
Well Control Equipment
BOP Stack: 11 rotation head, (1) Hydril GK 13-5/8 x
10,000# annular preventer, Cameron Type U 13-5/8 x 10,000# double ram
preventer, 13-5/8 x 10,000# mud cross, Cameron Type U 13-5/8 x 10,000#
single ram preventer, (2) 2 x 10,000# gate valves, (1) 2 x 10,000# chick
valve, (1) 4 x 10,000# gate vale, (1) 4 x 10,000# HCR valve
(1) closing unit, 9 station, 300 gallon triplex, air
actuated charging pumps
(1) remote closing unit, floor mounted in drillers dog
house
Choke Manifold: (1) 2 x 10,000# gae valve with
pressure gauge, (6) 4 x 10,000# gate valves, (1) 2 x 5,000# adjustable
choke, (1) 2 x 5,000# positive choke
All Mounted on 3 Axle Trailer, w/Hydraulic
Utility Winch, Folding Walkways, w/Stairs, Fuel, Air, Water & Hydraulic
Tanks, Work Platform, 10.00R20 Tires, Weight Indicator, Torque Indicator
SUBSTRUCTURE 12H X 14W X 35L Box Type Substructure
Rotary Beams, V Door Ramp, Stairs Safety Rails, 6 H Back On Ramp.
MUD PUMPS ((2) Continental Emsco F 650 triplex pumps,
powered by Caterpillar 379 Diesel Engines, Skidded, Forge steel fluid ends
w/treated caps, pulsation dampers, 2 shear relief valves, type D pressure
gauge, V belts w/guards, serial # 4 and 20
GENERATORS (2) 3406C, 320KW CAT SR4 generators,
w/Electric Starter, Radiators, Gauges, Control Panel, mounted, 75 Kw single
phase transfer mounted on 8ft x 32ft Heavy Float Trailer, w/Rails, Catwalk,
5hp Shop Air Compressor, Dog House, Stairs, etc.
HydraulicPOWER UNIT 1 CAT 3054 Hydraulic Power Unit with Quick release
Hydraulic Hose connections and 30 gallon reservoir.
TWO PIT MUD SYSTEM 5h x 710 x 30l Mud Suction Tank
w/double Compartment, Flat Bottom, Internal Plumbing, Mud Agitator, Side
Mounted Walkways, Stairs, Safety Rails, Skidded
5 X 710 X 30L Mud Shaker Tank w/(3)
Compartments, Flat Bottom, Internal Plumbing, Side Mounted Walkways, Stairs,
Safety Rails, Skidded
Mud Hopper w/Harrisburg 5 X 6 Centrifugal
Pump, p/b 50 HP Electric Motor, Skidded
Halco 5 X 6 Centrifugal Pump, p/b 50 HP
Electric Motor, Skidded
Brandt Mini Cobra Double Screen Shale
Shaker
Brandt 4 Cone Desilter
SWACO Single Cone Desander
ROTATING AND TRAVELY EQUIPMENT
Brewster 18 X 44 Rotary table w/Split
Master Bushing
Ideal 150 Ton Block/Hook Combination with/4
Sheaves 1 1/8 line
SWIVEL Brewster 6SX 220 ton Swivel
RIG HOUSES Parts House, 8ft x 15ft, Rounded Top,
Skidded
WATER/FUEL TANKS Fuel tank, 7,700gal horizontal 8X 20.6
with Centrifugal Positive Pressure Pump and Black Iron Fuel Lines
500 BBL Water Tank / mobile Frac Tank
AUXILLIARY EQUIPMENT
MARTIN DECKER Clipper 0 360,000# Weight
Indicator
Wire Line Unit, Electrically Controlled
4ID X Approx. 50L Rotary Hose, 5000 psi
2 (2) 8ID X 5L Suction Hose/Vibrator
hoses
4H X 8W X 30L Junk Box, Skidded
Florescent Rig Lights w/Wiring
Approx. 1000 of 1 1/8 Drill Line w/Spool,
Stand
Koomey 3 Station Closing Unit, S/N 10956,
w/(4) 10 Gallon Accumulators, (2) Air-
Operated Hydraulic Pumps, Stainless Steel
Flexline, mounted on Doghouse Porch
4 Ό X 37 Square Kelly and Square Kelley
Bushing
BJ Type B and Wooley Rotary Tongs
Cam Tech SSW 30 hydraulic pipe spinner
WELL CONTROL Regan
3.000 # annular
DRILL PIPE AND COLLAR
16 6 Slick Drill Collar
5,363 ft. of mixed grade and Quality 4
14.0# F.H. approximately 2,637 ft DWB, total of
8,000 feet all hard banded
CLEANED AND PAINTED
Price:
$2,400,000
These rigs
were drilling in Mid-Continent United States and are currently stacked. They are
in good condition and ready for use.
Partly built in China under European
supervision. It has since been upgraded for operations in Europe.
Drawworks ZJ 40 1000HP mechanical with hydraulic disc brake
Mast 141 ft with API hook load 555,000 lbs
Racking capacity 13 120 ft (4000 m)
Substructure 25 ft high, 555 00 lb rotary capacity, 320 000 lb set back capacity
21 ft clear under rotary beams
Travelling equipment 250 ton
Pumps Two F1000 triplex
Rotary table 27-1/2 in
Generator sets Two Caterpillar D379B with 500 kVA generators housed in an
acoustic enclosure
Mud system Four tank system with total capacity 1500 bbl, seven agitators and
vacuum degasser
Shakers Three Derrick hi-speed Super-G linear motion shakers
BOPs Annular preventer 5M NACE trim Cameron double gate 5M NACE trim with blind
and pipe rams
Accumulator Koomey 6-station 160 gal unit air operated with air and electric
charge Pumps
Choke manifold Nine valve 5M WKM choke with one auto choke and one manual
adjustable choke
Tubulars 15 000 ft 5 in 19.50 lb/ft Grade G-105 drill pipe with 5 in XH
Connections
12 x 8 in drill collars with 6-5/8 in Reg connections
18 x 6-1/2 in drill collars with 4-1/2 in IF connections
Pipe spinner Varco SSW-30 hydraulic drill pipe spinner
Iron roughneck 80 00 ft lb capacity for 8 in drill collars to 3-1/5 in drill
pipe
Casing tong Hydraulic casing tong with jaws for 13-3/8 in to 5-1/2 in
Fork truck JCB 540-70 with forks and safety pipe grabs
Buildings Toolpusher unit, welfare unit for crews, tool shack and stores unit
The rig is fully equipped and includes an inventory of spares and consumables
and is ready for work.
Manufactured 2006
Derrick, Pemco 104/240 8 lines
Draw works, model DD260
Sand line drum, line size 9/16 brake size 60 inch
Max single line pull 41500
Engine, Caterpillar C-15
Transmission, Allison model 5610
2 Steering axles, Eaton model 20F4
Tandem rear end, Eaton ratio 6:17 tag axle
Winch, Tulsa 707 W model 81485
4 Hydraulic leveling jacks
Manufactured 2007
Derrick, DR214401 96-250 8 lines
Draw works, model 5DH22098 By Service King
Sand line drum, line size 9/16 42 inch x 8 inch 5DH2218
Tubing drum, 1 inch tubing line lebus groove 42 inch x 12 inch drum brakes
Safety disc brake, Double 4 inch x 7 inch x 48 inch air operated disc brake
Engine, 60 Series Detroit
Transmission, Allison model 5610
2 Steering axles, 3VD00005 by Service King
Tandem rear end, Eaton with 1-tag axle
Winch, Tulsa
4 Hydraulic leveling jacks
Trailer, Year model 2007, 48 Fontain
Triplex pump, Tulsa TT560, with chain reduction
Pump Engine, 60 series Detroit, 500 HP motor with control panel
Transmission, Allison HT750 with Wilson kit, shifter and actuator
Hydraulic engine, 3054 Cat
(2) MCM centrifugal pumps, 5X6 and 4X5 200 series
Stock tank, 75 bbl tank with sand catching trough, suction and dumps
Shaker, Derrick 4 x 5 motion shaker
Fuel Tank, 300 gallons
Flow Monitors, Turbine, model FM0208
Barrel Counter, Turbine
Control House, 6 x 6 x 8 steel house with window and heat
(2) 2007 POWER SWIVELS
Mounted on a dual axle gooseneck trailer 2.5 power swivel 3054 Cat engine power
reels of 100 ft hydraulic 90 gallon fuel tank and 50 gallon hydraulic tank
Currently working
Price:
$540,000 for each reverse unit which
is composed of one pump and one power swivel.
Carrier All above mounted on Challenger Tri Axle
Trailer with Detroit 8V-92 diesel engine electric start, Radiator, Gauges,
Allison HT-750 transmission, (2) 4,000 lb. hydraulic hoist, Quincy 325 air
compressor, Halliburton F-300 Hyd. Wrieline unit, (1) Hydraulic Reservoir, (2)
500-Gallon fuel tanks, (4) Hydraulic leveling jacks, Folding walkways with (1)
stair, Safety rails, 18R22.5 front & 11R20 dual rear tires
Substructure T-Type 10 H x 8 W x 40L cross brace
substructure with 100,000 lb. setback, 150,000 lb. casing load with rotary
beams, V-door ramp, Stairs, Safety rails & deadline anchor, 12 W x 40 L mud
boat
Mud Pump #1 Wilson 600 duplex independently powered by
Detroit HV-71 engine
Mud Pump #2 Wilson 600 duplex independently powered by
Detroit HV-71 engine
Rotating Equipment
Howard turner 18 rotary table with
split master bushings, Howard Turner 75 ton swivel, Venture tech V36K power sub,
6,800 lb. torque @ 20 rpm
Traveling Equipment
(2) McKissick 75 ton blocks with (3)
28 sheaves, 7/8 line, 1 set (2) 3 dia. X 108 L elevator bails
Well-Control Equipment
Washington rotating head with 9 x
3M flange, Regan 10 x 3M annular blowout preventer, Cameron 3-station closing
unit with 80 gallon spherical tank, Gardner-denver triplex pump, gauges, skidded
Houses Shopbuilt 8 W x 32 L Tandem axle tool
pushers house, fully furnished, shopbuilt 8 W x 21 L parts house with lights,
cabinets, parts bins, skidded
Generator/Utility
House Two (2) Olympian 100Kw. Ac
generator powered by Perkins 6-cylinder diesel engine with electric start,
Radiator, Gauges mounted on dog house trailer, 75 KVA, Cutler hammer electric
panels, Shopbuilt 8 W x 25 L dog house with W x 82 L change room with 12
lockers, electric heater, knowledge box, bench seat, refrigerator, microwave,
lights, All above mounted on 8 W x 56 L Tandem axle trailer
Mud System Two 250 bbl. tanks, Two (2) Mission 2 x 3
centrifugal mixing pump with marathon 10 HP electric motor, Mission 2 X 3
centrifugal mixing pump marathon 10 HP electric motor
Fuel/Water Trailer
200 Bbl Water tank, 3,000 gallon
fuel tank, mounted on 10 x 40 L Tandem axle trailer
Instrumentation Martin Decker 340,000 lb weight indicator
with pump pressure gauge, Tong line gauge
Drill Pipe and Drill
Collars TBD
Handling Tools Woolley Type C rotary tongs with shorty
arms, Web Wilson 3-1/2 drill pipe elevators, set of 2-78 drill pipe elevators,
Safety clamp, Drill pipe slips
Ancillary Equipment
Two (2) Shopbuilt 7 9 W x 32 H x
37 L pipe tubs, One (1) with center walk, Skidded, 1 set pipe racks, 3 x 54 L
Rotary hose, (2) 6 x 8 L suction hoses, (2) 3 ½ x 22 L vibration hoses,
Hotsy steam cleaner, Case 1150 bulldozer, Miscellaneous spare parts, hand tools,
valves, fire extinguishers, etc.
Carrier All above mounted on Challenger Tri-axle
trailer with Detroit 8V-71 diesel engine with Allison HT-750 transmission, (2)
4,000 lb. Hydraulic winches, (1) Quincy air compressor model 325, (1)
Halliburton F-300 Hyd. Wireline unit, (4) leveling jacks, (2)-500 gal. fuel
tanks, Folding walkways, Stairs, Safety rails, 11.00R20 tires
Substructure T-type 10 H x 8 W x 12 L back on ramp
type substructure with 8 3 clear height under rotary beams, 100,000 lb.
setback, 150,000 lb. casing load with rotary beams, V-door ramp, Stairs, Safety
rails, Dead-line anchor, 12 W x 40 L Mud boat
Rotary Table 18 Howard Turner with split master
bushings
Blocks 2 each 75 ton McKissick with (3) 28 sheaves,
7/8 line
Swivel Howard Turner 75 ton
Elevator Bails 2 each 3 D x 108 L
Power Sub Venture Tech PS-6K
Accumulator 3 station closing unit, with 80 gallon
spherical tank, Triplex pump
BOPs Regan 10 3000 PSI annular
Rotating Head Washington 3000# 9 flange
Mud Pump #1 National 7-P-50 500HP triplex powered by
Cat D-379 engine
Mud Pump #2 Wilson 600 duplex powered by Caterpillar
3408B engine
Mud System (2) Shop built 250 Bbl bulk tanks, , (2) Godwin
trash pump, powered by John Deere 4 cyl. diesel engine mounted on single axle
trailer
Generator/Utility
House Shop built 8 W x 8 6 H x
10 L, 4,900 gallon fuel tank with mission 1 1/8 pedestal fuel pump with 10HP
US electric motor
Quincy air compressor
model 325, powered by 10HP WEG electric motor,
Hobart 10,000 Watt welding
machine,
All above mounted on 8 W
x 48 L Great Dane tandem axle trailer
Instrumentation Martin Decker Hydro-Weight Special weight
indicator with pump pressure gauge and tong line pull gauge, Martin Decker
Clipper weight indicator
Handling Tools Wooley type C rotary tongs with Shorty
arms, (1) set of Web Wilson 3 ½ drill pipe elevators, (1) set of 2 7/8 drill
pipe elevators, (1) set of Varco 3 ½ slips, (1) set of Varco 2 7/8 slips, (1)
Baash-Ross DC safety clamp
Ancillary Equipment
Pipe Tubs-(3) drill pipe &
(1) center walk
Pipe Racks (1 set) 3 H
x 20 L
Rotary Hose-(1) 3 x 54 L
Suction hose-(2) 8 x 20
L
(1) shop built 8 W x 32
L toolpushers house with office and sleeping quarters, Tandem axle
(1) Shop built 8 W x 25
L drillers dog house with lockers, knowledge box, bench storage, lighting,
heater, microwave, skidded
(1) Shop built 8 W x 20
L parts house with lights, parts bins, bench storage, skidded
(1 lot) Winterization
(1) Caterpillar D-6M
bulldozer
(1 lot) Miscellaneous
spare parts, hand tools, valves, fire extinguishers, etc.
Carrier All above mounted on Dickerson Tri-Axle trailer
with Detroit 8V-92N diesel engine with electric start, Radiator, Gauges, Allison
CLT-750 transmission, (2) Koenig 2,500 lb. hoists, Halliburton wireline unit,
(1) Hydraulic reservoir, (2) 500-gallon fuel tanks, (4) Hydraulic leveling
jacks, Golding walkways with stairs, Safety rails, 18R22.5 front tires & 11R20
rear tires
Substructure Shop built 8 6 W x 10 L Drive-on ramp
type substructure with 100,000 lb. setback, 150,000 lb. casing capacity, Rotary
beams, V-door ramp, Stairs, Safety rails, Deadline anchor
Mud Pump #1 National 7-P-50, 550 HP triplex
independently powered by Cat D-379 diesel engine
Mud Pump #2 Wilson 600 duplex mud pump independently
powered by Detroit HV-71 diesel engine
Power Sub Venture Tech PS-6K
Rotating Equipment
Howard Turner 18 rotary table with
split master bushings, Howard Turner 75 ton swivel, 4-1/4 dia x 40 L square
Kelly
Traveling Equipment
(2) McKissick 75 ton blocks with (3)
sheaves f/ 7/8 line, 3 x 108 L elevator bails
Well-Control Equipment
Regan 10 x 3,000 psi. annular
blowout preventer, Cameron 4-station closing unit with Triplex pump, Gauges, (4)
20-gallon accumulator bottles, Electric/Air pump, skidded
Houses
8 W x 32 L Tandem axle
toolpushers trailer, fully furnished
Shop built 8 W x 18 L
Drillers doghouse with round top, (5) lockers, Bench storage, Lights, Heater,
200 Bbl. Water tank, 8,000 Gallon fuel tank, mounted on 8 W x 40 L Tandem axle
trailer, 10.00 x 22 tires
Shop built 76 w x 21 L
Change house with (13) lockers, Bench, Fluorescent lights, Heater, 76 W x 9L
parts room with shelving, 76 w x 62 L Fuel tank, mounted on 76 W x 36 L
Tandem axle trailer, 10.00 x 22 tires, 10-hole budd wheels.
Shop built 8 W x 10 L
parts house skidded
Generator / Utility
House
No.1 Olympian 100 KW. AC
generator powered by Perkins 1066-6TG diesel engine with electric start,
Radiator, Gauges, Mounted dog house trailer
No. 2 Olympian 100 KW.
AC Generator powered by Perkins 1066-6TG diesel engine with electric start,
Radiator, Gauges, Mounted dog house trailer
Shop built 2 W x 4 H x
9 L, 4-compartment Lubester, Mounted utility house
1-Stage air compressor
powered by 5HP electric motor, Mounted on 50 Gallon air receiver tank
All above mounted 8 W x
30 L Utility house, Skidded
Mud System (2) 250 Bbl. Bulk Tanks, (2) Mission magnum 2
x 3 centrifugal pump, electric motors
Instrumentation Martin
Decker The clipper 340,000 lb weight indicator, Martin Decker Hydro-Weight
Special 320,000 lb weight indicator with pump pressure gauge
Drill Pipe TBD
Drill Collars TBD
Handling Tools Woolley Type C rotary tongs, Web Wilson
3-1/2 drill pipe elevators, Set of 2-7/8 drill pipe elevators, Varco drill
pipe slips, BASSH-ROSS DC safety clamp
Ancillary Equipment
(2) shop built 79 W x 32 H x 37
L pipe tubs, (1) with center walk-skidded, (1) set of (2) 3 H x 20 L Triangle
pipe racks, 3 x 40 L rotary hose, (1) 3 Dia. X 16 L Vibrator hoses, (2) 8 x
12 L Suction hoses
Miscellaneous spare parts,
hand tools, valves, fire extinguishers, etc.
Carrier: All Above Mounted on Challenger Tandem Axle
Front & Tri-axle Rear Single Man Cab Carrier, w/ Detroit 60 Series Diesel
Engine, w/ Allison CLBT-5860 Transmission (2) 4,000 Lb. Hydraulic Winches,
(1) Quincy Air Compressor, Model 325, (1) Halliburton F-300 Hyd. Wireline Unit,
(4) Leveling Jacks, (2) 500 gal. Fuel Tanks, Folding walkways, Stairs, Safety
Rails, 18R22.5 Front & 11.00R20 Rear Tires
Substructure: T-Type 10H x 8W x 12L Back on ramp type
substructure with 83 clear height under rotary beams, 100,000 Lb. Setback,
150,000 Lb. Casing Load, w/ Rotary Beams, V-Door Ramp, Stairs, Safety Rails,
Dead-line Anchor, 12W x 40L Mud Boat
Rotary Table: 18 Howard Turner w/ Split Master Bushings
Blocks: 2 Each 75 ton McKissick, w/ (3) 28 Sheaves,
7/8 Line
Swivel: Howard Turner 50 Ton
Elevator Bails 2 Each 3 D X 60 L
Power Sub: Venture Tech, Model # PS-7K-3000, 7,000 Lb.
Torque @ 20 RPM
Accumulator: S&S Gas Powered 2 station closing unit M/N
GE-03030-30, 45 Gal.
BOPs: Hydril 7 3000 PSI Annular
Rotating Head: Washington 3000# 11 Flange
Mud Pump #1 Gardner Denver PAH Triplex Pump, Hydril
K-20-3000 Pulsation Dampener, O'Drill 2 x 5,000 psi Shear Relief Valve O'Drill
6,000 PSI Pressure Gauge, V-Belt Drive Assembly, Master skidded w/ Detroit 60
Series Diesel Engine,Allison HT-750 Transimission MCM 5" x 6" x 12" Centrifugal
Pump
Mud Pump #2 Gardner Denver PAH Triplex Pump, Hydril
K-20-3000 Pulsation Dampener, O'Drill 2 x 5,000 psi Shear Relief Valve, Cameron
6,000 PSI Pressure Gauge, V-Belt Drive Assembly, Master skidded w/ Detroit 60
Series Diesel Engine, Allison HT-750 Transmission MCM 4" x 5" x 12" Centrifugal
Pump
Mud System: (1)10'W x 6'H x 37'6"L, 386 Bbl. w/ 8'L
Porch Extension, (3) Compartments, Flat Bottom, Internal Plumbing, Top Mounted
Walkways, Stairs, Safety Railing, (2) - Mission 5" x 6" x 11" Centrifugal Mixing
Pumps both powered by US Electric 30 HP Electric Motors, w/ (2) Brandt Mud
Agitators p/b Allis Chalmer 10 HP Electric Motors, w/ (1) National DLMS-235
Single Screen Shale Shaker, w/ 48" x 8'H Atmospheric Degasser.
Generator / Utility
House:
Generator # 1 - General
Electric 300 Kw AC Generator, p/b Cat 3408 DIT Diesel Engine
Carrier: All Above Mounted on Challenger Tri-Axle
Trailer, w/ Detroit 12V71T Diesel Engine, 445 HP, Air Start, w/ Allison
CLBT-5860 Transmission (1) 12,000 Lb. Rowson-Koenig Hydraulic Winch, M/N S0066,
(1) Quincy A
Substructure: Challenger Back on ramp type substructure,
10' Floor Heigth w/ 8' from Rotary Beams to Ground Level, 100,000 Lbs. Set-Back,
w/ Rotary Beams, V-Door Ramp, Stairs, Safety Rails, Dead-line Anchor, (2)
12,000Lbs. BOP Lifting Hoists w/ Trolly Beams, (2) 20,000
Rotary Table: 18 Howard Turner w/ Split Master Bushings
Blocks/Hook: Garner Denver 200 Ton Block w/ Web Wilson
"Hydra Hook" 150 Ton
Elevator Bails 1 3/4"Dia. x 96"L 150T
Accumulator: Guangzhou Dongsu Machinery 5-Station 12-11
Gal. Bottle, M/N 0480-5, Mounted on Water Tank Skid, w/ 6-Station Remote
Control Panel Mounted on Doghouse Skid
(22) 1" Stainless Steel
Armored Covered Hoses
BOPs: 11 3K Annular Cameron 11" x 5K Double Ram
Preventer w/ (4) 4 1/16" x 5K Flanged Side Outlets
9" 5K x 11" 3K x 24"T
Drilling Spool w/ (2) 2 1/16" 5K Flanged Outlets
3 1/8" x 5K Choke
Manifold, 30"Dia x 12'T Degasser mounted on 8'W x 20'L Skid
(1) 3 1/2" x 30'L x 5K
Stainless Steel Armored Covered Hose
Drawworks
One (1) Ideco H-44C
Single Drum Drawworks 700 HP, Lebus grooved for 1-1/8 drilling line, Koomey
Crown-O-Matic powered by Two (2) Detroit 8V-71N diesel engines with (2) Allison
Mod. CLBT-5860 Transmissions
Catworks
One (1) Foster Makeup
and breakout cathead
One (1)
drillers instrumentation box with Martin Decker weight indicator, type clipper,
Atlas pump pressure gauge, tong line pull gauge, rotary torque gauge.
One (1)
drillers instrumentation console with control valves for M/B tongs, mud pumps,
transmission shifters, rotary table and drawworks hoisting clutch.
One (1)
Bottom Change house with 12 each lockers, benches, and insulated with one (1)
electric heater and parts room
One (1) Top
Dog house with Drillers knowledge box, tool box, electrical outlets, Satellite
automatic driller type Apollo and 1 each electric heater. (8'W x 18'L ).
One (1) lot
of rig lights and wiring.
One (1) Web
Wilson Type C safety clamps 5 ½ to 6
Four (4) pipe
racks, 36 H x 28 L
Five (5)
Stairways
One (1)
V-door ramp.
Eight (8) 20
lb. fire extinguishers type ABC.
One (1) lot
of documentation to include rig books, equipment, passports, and drawings.
Drill Pipe TBD
Drill Collars TBD
Cross Over Subs Numerous cross over subs
Bit Subs Two (2) each bit subs, 4-1/2 I.F.
box up by 4-1/2 regular box down, bored for Baker float.
Two (2) each
bit subs, 3-1/2 I.F. box up by 3-1/2 regular box down, bored for Baker float.
Handling Tools One (1) set Varco, 4 1/2
drill pipe slips w/ 4 dies, One (1) set Varco drill collar slips, 6 O.D.
Elevators One (1) each Wooly 4 drill pipe
elevators, One (1) each Bash Rosh 7 Elevators
Other Items / Kelly &
Saver Subs
One (1) 40L
x 4 Ό Square Kelly
One (1)
Foster model 77 Kelly Spinner
One (1) Varco
4KRUS Kelly drive bushing, Square drive
Drill Collar Lift
Nipples and Accessories N/A
Kelly Valves / Float
Valves One (1) each
TIW upper Kelly cock, Two (2) each TIW lower Kelly cock
Winterization Rig tarps f/ floor & sub &
derrick board, Two (2) electric heaters.
Drawworks One (1) OIME SL-5 drawworks 700
HP, Parmac 343 Hydromatic brake, drum grooved for 1 1/8 drilling line, Crown-o-matic
Catworks One (1) OIME C-7, 400 HP, with
torque tube with one each model 37AH make up cathead and one model 24AH break
out cathead
Mast One (1) Parco 550-K cantilever
mast, 131 tall mast with mast stand, Tong counterweights, Ladder, Derrick
climber, Geronimo Static hook load with 10 lines 550,000 lbs maximum wind 85
MPH, with 4 inch 5,000 psi standpipe & standpipe manifold
Substructure One (1) substructure Parco split
level, 550,000 lb hook load with maximum pipe setback capacity 400,000
(simultaneous) 18 height above ground with 15 clear height under the rotary
table
Rotary Table One (1) Pyramid-Hacker 27-1/2
rotary table rated at 275 tons, disk back brake system with split rotary table
bushings
Engines Three (3) Caterpillar 3408B
engines 375 HP each with Allison CT6061 transmissions on compound
Mud Pumps Two (2) 1000HP triplex mud pumps
independently driven by Caterpillar D-399 Engines
Travelling Block One (1) Ideco model shorty, 260
ton traveling block, 5-36 sheaves and 1-1/8 line
Hook One (1) ideco, model shorty, 260
ton
Elevator Links One (1) set elevator links,
2-3/4 x 114 x 300 tons
Swivel One (1) Ideco swivel, model
TL-300, capacity 300 tons
Drill Line One (1) 5000 of 1-1/8 drilling
line with
Deadline Anchor One (1) National type D deadline
anchor with Martin Decker type E-80 load cell
Air Hoists Two (2) Ingersoll Rand K5UL air
hoists with 5/8 wire line
Crown Block Assembly
One (1) OIME 5-36 sheaves and
1-52 fast line sheave grooved for 1 1/8 drilling Line
Toolpushers Trailer One (1) Rig Manager trailer with
two each bedrooms, two bathrooms, kitchen,
laundry room
Mud Conditioning Equipment
Mud pits 720 total barrels
1-270 bbl suction pit with four compartments, three Brandt 10HP mud agitators,
one mixing mud hopper and one 50 HP 5 x 6 Halco 2500 supreme centrifugal pump.
1-200 bbl shale pit with four
compartments, 1-Brandt 10HP mud agitator and 3 each per tank 3 mud guns with 1
Ό nozzles
1-250 bbl storage pit with two HP
mud mixers powered by one 5 x 6 centrifugal pump
One (1) Derrick mud cleaner FLC 3
panel with 20-4 desilter cones powered by 50HP MCM 5 x 6 Centrifugal pump
One (1) Harrisburg desander with
1-12 desilter cone, powered by 50HP MCM 5 x 6 centrifugal pump
Two (2) Derrick flow line
cleaners
One (1) mud bucket with 5 and
3-1/2 inserts, discharge hose to the flow line
One (1) mud line, manifold: 4
5000 psi mud line with 6-4 5000 psi Demco gate
valves and 3-4 5M# vibrator
hoses
One (1) rotary hose, 3 ½ ID with
4 unions, 5000 PSI WP, length 60
BOP Equipment
One (1) Hydril annular BOP, 13
5/8 , 2000 psi stud top and 13 5/8 flanged bottom 3000 psi
One (1) Washington rotating head
series 1300, 13 5/8 bottom flange 3000-5000 psi, 150 psi WP
One (1) Cameron double BOP,
13-5/8 5000 psi, type U, flanged top and bottom with 4-3-1/16 5000 psi outlets
and standard 11 cylinders
One (1) Cameron gate valve,
manually operated, 4-1/16 5000 psi
One (1) Cameron gate valve,
manually operated, 2-1/16 5000 psi
One (1) choke line, armored fire
resistant API flexible hose 3 10,000 psi, 3 ID, API 4 1/16 flanged both ends,
44 8 long
One (1) Kill line, steel flex
hose, 5000 psi, 2 ID, API fig 1002 hammer unions
One (1) choke manifold with 2
each 4 1/16 5000 CIW Type FC manually operated gate valves, 5 each 3 1/16 5000
psi CIW Type F manually operated gate valves, 1 each 5000 psi 4 Oteco manual
operated valve 2 each 5000 psi 2 1/16 Cameron manually operated gate valve, 1-4
way tee block, 2 each 2 1/16 5000 psi manual operated hydraulic choke, 8-5/8
OD header pipe, 2-3-1/8 5000 psi flanges and 1-4-1/8 5000 psi flange
One (1) Air remote control unit
mounted inside top dog house with access to control valves from the rig floor
One (1) lot colflex BOP hoses,
One (1) Degasser
Air Compressors
One (1) Quincy piston compressor,
model 390LVD-A, with 20 HP electric motor and 300 gallon receiver tank
Two (2) air dryer, Airtek
desiccant type, model TW55 T( 4103-09K, (arctic class)
Handling Equipment One (1) set Woolley type B tongs,
with jaws for 3-1/2 to 10-3/4, 11-3/4 and 13-3/8
One (1) Oil works Kelly spinner
with RH & LH air drive motors, 6-5/8 regular Box & Pin
Drill Collars TBD
Drill Pipe TBD
Miscellaneous Equipment
One (1) 550 bbl water tanks, two
(2) each 3 x 4 centrifugal pumps with 25HP AC electric motors
One (1) 285 bbl fuel tank, 2 each
3.5HP 1 x 1 ½ centrifugal pump, 2 each Roper transfer pumps and Winslow duel
sock fuel filter system
One (1) utility house with
accumulator unit, (1) each Koomey model 80, 5 station, 12-20 gallon bottle
(10gallon useable fluid), powered by Koomey triplex pump powered by 10HP
electric motor and two air driven pumps
Two (2) Armstrong generators,
each generator 300 KW, 480 volts, each powered by an Ideco engine, one AC
transformer main rig power KVA 45, one AC Transformer KVA 45 on separate skid,
both air cooled and diesel fuel day tank
One (1) Westinghouse control
panel, dual generator system with nine (9) breakers
One (1) Quincy piston compressor,
model QR390 with 20HP electric motor and 400 gallon receiver tank
One (1) Totco drilling recorder
to indicate drilling depth and record rate of penetration, weight of drilling
assembly, pump pressure
One (1) drillers instrumentation
box with Martin Decker weight indicator, type clipper, Atlas pump pressure
gauge, tong line pull gauge, rotary torque gauge
One (1) drillers instrumentation
console with control valves for M/B tongs, mud pumps, transmission shifters,
rotary table and drawworks hoisting clutch
One (1) lot utility suitcase,
with Koomey lines, water lines, steam line, air line and electric cables inside
One (1) Mathey wireline unit with
15,000 of .092 wire line, 15HP electric motor Two (2) Flapper type float valves
(6 & 8)
One (1) bottom change house with
19 each lockers, benches and insulated with one (2) electric heater and parts
room (10 x 40)
One (1) top dog house with
drillers knowledge box, tool box, electrical outlets, satellite automatic
driller type Apollo and 1 each electric heter (10 x 30)
One (1) set rig mats, 8 x 12 x
6
One (1) lot of rig lights and
wiring
One (1) each of drill collar
clamp for 9-1/2 and 6-3/4 drill collars
Four (4) pipe racks, 28 length x
43 high
Other Equipment Available by
Negotiation
Tesco 250 ton HMIS Top Drive
complete with rails and full set of controls. Powered by portable Tesco power
unit with Detroit 60 series engine
Kelly Drive Bushings 4-1/4" Hex, Square Drive Kelly
Bushing
Kelly Spinner Oil Works 1500 Kelly Spinner
Elevator Bails 250 Ton
Power Swivel Venture Tech, Model # XK-150, 150
Ton, 12,000 Ft/Lb. Torque @ 5,000 Psi.
Power Swivel Unit Venture Tech, p/b Caterpillar C-9
Diesel Engine
Accumulator 5 Station, 295 Gal. Tank, (12) 11
Gal. Accumulator Bottles Mounted on Water Tank Skid, w/5 Station Remote Control
Mounted in Doghouse
BOP Equipment Hydril 11 x 5,000 psi Annular,
Cameron Type U 11 x 5,000 psi 11" x 5K x 24"H Drilling Spool w/ (2) 4 1/16"
5K Side Outlets
Choke Cameron 3 1/8" x 5K, w/ (1) 5 way
Block, (8) 3 1/8" x 5K Gate Valves, (1) 2 1/16" x 5K Gate Valve, (2) 3 1/8" x 5K
Adjustable Chokes, (1) Buffer Chamber
Degasser 30"Dia x 12'L
Choke Line (1) 4 1/16" x 5K Gate Valve, (1)
4 1/16" x 5K HCR Valve
Kill Line (2) 2 1/16" x 5K Gate Valve, (1)
2 1/16" x 5K Check Valve
Mud Pump #1
National 8-P-80 Triplex Pump, 800
HP., Hydril K20-5000 Pulsation Dampener, Oteco 3 x 5,000 psi Shear Relief
Valve, Teolegraph Pioneer Type D 0-6,000 PSI Pressure Gauge, Bridges Equipment
Chain Drive Assembly, Master skidded w/ Caterpillar D398 Diesel Engine, Air
Start, MCM 6" x 5" Centrifugal Charging
Pump, MCM 3" x 2" Centrifugal
Liner Wash Pump
Mud Pump #2
National 8-P-80 Triplex Pump, 800
HP., Hydril K20-5000 Pulsation Dampener, Oteco 3 x 5,000 psi Shear Relief
Valve, Type D 0-6,000 PSI Pressure Gauge, Chain Drive Assembly, Master skidded
w/ Caterpillar D398 Diesel Engine, Air Start, National Torque Converter M/N
C-300-64, MCM 6" x 5" Centrifugal Charging Pump, Mission Pedestal 3" x 2"
Centrifugal Liner Wash Pump
Mud System
Two (2) pit, 700 bbl complete
with four (4) 5x6 centrifugal mixing pumps each powered by 50 HP electric
motors, five (5) agitators each powered by 10 HP electric motors.
Two (2) Fluid Systems, Inc. High
G-Force Linear Motion Shale Shakers
One (1) Fluid Systems, Inc.
Vacuum Degasser
One (1) Fluid Systems, Inc. 3 -
Cone Desander (10Cones)
One (1) Fluid Systems, Inc. 12 -
Cone Desilter (4 Cones)
Generator / Utility House
Generator # 1 - Detroit 350 Kw AC
Generator, p/b Detroit Series 60 Diesel Engine, Electric Start
Generator # 2 - Detroit 350 Kw AC
Generator, p/b Detroit Series 60 Diesel Engine, Electric Start
75 KVA Transformer
#1 Air Compressor - Quincy M/N
QR390, p/b 20 HP Baldor Electric Motor
#2 Air Compressor - Quincy M/N
QR390, p/b 20 HP Baldor Electric Motor
(2) Elite Series ECP80
Refrigerated Air Dryer
(1) 120 Gal. Air Receiver
All Above Mounted in 10'W x 40'L
Skidded House
Water Tank
(1) Shop Built 10'W x 8'H x 30'L
425 Bbl. Water Tank w/ 20' Covered Porch
(1) Double Life 3" x 4" x 13"
Centrifugal Water Pump p/b 30 HP Electric Motor
(1) Double Life 3" x 4" x 13"
Centrifugal Water Pump, p/b 30 HP Electric Motor
Fuel Tank
12,000 Gal. Fuel Tank w/ 8'W x
12'L Pump House, w/ O'Drill Fuel Filter & (2) Roper 2AM12 Fuel Pumps p/b Baldor
5 HP Electric Motors, 4 Compartment Lubister, Shelving
Dog House 8'W x 20'L Dog House w/ (3)
Lockers, Knowledge Box, Bench Storage, Lights, Heater
Change / Parts House 10'W x 40'L Skid w/ 20'L Parts
House w/ shelving, w/ 17'L Change House w/
(20) Lockers, Bench, Lights,
Heater, Table
Instrumentation Atlis Instrumentation Type FS,
300,000 Lb. Weight Indicator, w/ Pump Pressure Gauge and (2) Tong Line Pull
Gauges, Rotary Torque Gauge, Atlis Instrumentation Automatic Driller 3-Pin
Drilling Recorder
(1) Five Star Wireline Retriever
w/ 15,000' of .092 wire
Handling Tools
(1 set) Type B Rotary Tongs w/ 3
1/2" - 5", 5" - 6 3/4", 6 5/8" - 9" Jaws
(1 set) Type C Rotary Tongs w/ 3
1/2" - 5", 5 1/4" - 7" Jaws
(1) 4" Woolley 225 Ton Drill Pipe
Elevators
(1) 4" Woolley Drill Pipe Slips
(1) Type A 5 1/2" to 7" DC Slips
(1) Type A 6 3/4" to 8 1/4" DC
Slips
(1) 6 1/4" DC Safety Clamp
(1) 8" DC Safety Clamp
(1) Pipe Spinner, Air Operated
Drill Pipe and Drill Collars
TBD
Ancillary Equipment
(1) 5'W x 18"H x 50'L Catwalk 2
Pieces
(4 set) 18"H x 30'L Pipe Racks
(1) 3 1/3" x 55'L Rotary Hose
(3) MDL 800 Bug Blowers 24", 36",
48"
(1) 8' x 20' Parts Container w/
Shelving, Lighting
Drawworks: Cabot 750
Drawworks, Model 2042, Main Drum Lebus Grooved For 1-1/8 Drill Line. Drawworks
Powered By Two (2) Detroit Diesel Series 60 Engines With Allison Model 5860
Transmission.
Auxiliary Brake: Parmac 202 Hydromatic Brake.
Mast: Cabot 112 Ft. Clear Height, 300.000 Lb Static Load Capacity (Eight Lines
Strung) 4-Leg Telescoping Mast. Complete With Cabot Crown Block, With Five (5)
30 Dia. Sheaves Each Mounted On A Shaft With Roller Bearing And Grooved For
1-1/8 Wire Line And One (1) 36 Dia. Fast Line Sheave And One (1) 30 Dia. Dead
Line Sheave Both Grooved For 1-1/8 Wire Line.
Substructure: Crown T-Type Hydraulically Telescoping Substructure. 15 Ft. Floor
Height And 12 Ft. Clear Height Under Rotary Beams. Rotary Load Capacity Is
350,000 Lbs. And Setback Capacity Of 200,000 Lbs. Simultaneous Load Of 550,000
Lbs.
Traveling Equipment: One (1) Mckissick Type Rj 150 Ton Triplex Hook/Block
Combination. Complete With Four (4) 30 Dia. Sheaves Grooved For 1-1/8 Wire
Line. Hook Is Spring Loaded With Hydraulic Snubber.
One (1) Brewster Model 6bx, Swivel
One (1) 4-1/4 Square Kelly. 38 Ft. Long.
Rotary Table: One (1) Zp1750, National Style 17-1/2 Rotary Table. Table
Complete With Split Body Square Drive Master Bushing. Table Is Propeller Shaft
Driven Via Full Air Rotary Clutch, Heavy Duty Reverse Gear Box And Oil Bath
Roller Chain Elevated Rotary Drive Unitized On Back Face Of Mast.
One (1) 20 Hds Kelly Bushing For 4-1/4 Square Kelly.
Well Control Equipment: One (1) 11 Annular, Hydraulic Blowout Preventer, 5000
Psi, Wp.
One (1) 11, 5000 Psi Wp Double Ram Type Hydraulic Blowout Preventer. Studded
Top And Bottom.
One (1) Cameron Style 4-1/16 X 5000 Psi Wp Hydraulic Operated Gate Valve
One (1) Cameron Style 4-1/16 X 5000 Psi Wp Manual Operated Gate Valve
Two (2) Cameron Style 2-1/16 X 5000 Psi Wp Manual Operated Gate Valve
One (1) Cameron Style Check Valve 2-1/16 X 5,000 Psi Wp
One(1) 4-1/16 X 2-1/16, 5,000 Psi Wp Choke Manifold. One (1) 36 Od
Atmospheric Degasser. Unitized On A Single Oilfield Type Skid
One (1) 5 Function Accumulator Unit. Complete With Twelve (12) Eleven (11)
Gallon Accumulator Bottles, Triplex Pump Driven By 25 Hp A.C. Electric Motor And
Air Operated Back Up Pump. One (1) Air Remote Drillers Panel Installed On Drill
Floor.
Mud Pumps: Two (2) Hong Hua Model F-1000 Triplex Mud Pumps. Powered By A
Caterpillar Model D399 Diesel Engine. Suctions Charged By A 6 X 5, Series 250
Centrifugal Pumps (Jack Shaft Driven). 5000 Psi Discharge Pulsation Dampeners,
3 Oteco Style Shear Relief Valve, 0-6000 Psi Pressure Gauge, 4, 5000 Psi Wp
Demco Style Gate Valve For Discharge Line, 2, 5000 Psi Wp Demco Style Gate
Valve For Pressure Bleed Line. Complete With Lp Suction Valves And Piping And 4
Hp Welded Steel Discharge Piping. All Unitized On A Welded Steel Oilfield Skid.
Mud System: Two (2) Tank Mud System Of Approximately 750 Bbl Total Capacity.
Shaker Tank Of Approximately 384 Bbls With Two (2) 6 X 5 Series 250
Centrifugal Pumps Powered By A 50 Hp Ac Electric Motor. One (1) Mi-Swaco Model
6t12, 12 Cone Desilter, One (1) Mi-Swaco Model 210 Horizontal Desander, One (1)
Mi-Swaco See-Flo Degasser With 10 Hp Ac Electric Motor, One (1) Mi-Swaco 7.5
Hp Max2000 Low Profile Horizontal Mud Agitator. One (1) Mi-Swaco Dual Meerkat
3-Panel Low Profile Selectable Dual Motion (Linear Or Balanced Elliptical) Shale
Shaker.
Suction Tank Of Approximately 365 Bbls With Two (2) 6 X 5 Series 250
Centrifugal Pumps Powered By A 50 Hp Ac Electric Motor. Four (4) Mi-Swaco 7.55
Hp Max2000 Low Profile Horizontal Mud Agitator
Water Tank: One (1) 450 Bbl Capacity Water Tank Complete With Two (2) 3 X 2
Series 250 Centrifugal Water Pumps Powered By 20 Hp Ac Electric Motors.
Fuel Tank: Cylindrical 10000 Gallon Capacity, Skid Mounted And With 200 Gallon
Lubester. Two (2) Independent Gear Pumps Driven By 5 Hp Electric Motor.
Electrical System: Two (2) Detroit Diesel Series 60, 370 Kw Generators. Complete
With Switchgear And Transformers.
Auxiliary Equipment: One (1) Retriever Wireline Measuring Unit Complete With
15,000 Ft. Of 0.092 Wire Line.
One (1) Ingersoll Rand Model Fa2.5 Air Hoists Complete With 5/8 Wire Line.
Compressed Air System: One (1) Quincy Model Qsb-40 Air Cooled Rotary Screw
Packaged Air Compressor Unit Delivering 165 Cfm At 125 Psi And Powered By A 40
Hp Ac Electric Motor And Complete With Modulation Controls. Complete With A 200
Ga. Air Receiver.
One (1) 200 Ga. Horizontal Air Receiver Mounted At The Substructure.
Rig Site Structures: One (1) Hydraulically Raised And Lowered Drill Floor House
At Drillers Position Price: $5,200,000
This Rig Is Rigged
Up In The US And Is Available For Immediate Sale And Delivery. It Is Made From
New Or Rebuilt Components. It Is Ready To Be Placed Into Immediate Use.
The 550 is a Double-Drum Drilling, Workover & Well Servicing
Unit. Its mast reaches 104 above the ground and provides a 250,000LB static
hook load capacity. A Cat C-15 engine, 540 hp with an Allison 5860RB or equal
transmission & torque converter powers the unit. All components are mounted on a
5-axle carrier.
I. BASIC RIG
CARRIER (5 axle 10 X 4 drive )
Air brakes on all wheels
Tandem front, steering axles,
(rated @ 22,000 lb ea.) (8.2mt.ea.) with 4 spring suspension
Hydraulic power assist on
steering axles, with ample capacity to provide ease of steering
Rear tandem driving
axles,(rated @ 50,000 lbs. total) (18.65mt. total) with walking beam suspension
Air controlled spring brakes
mounted on all rear axles
Third (non driving) rear axle
with air bag lift suspension rated at 25,000 lb. capacity.
Wheelbase: 340(863cm) front
center to rear tandem center
Fabricated high tensile steel
beam vehicle frame
Safety tread decking
Front and rear tow bars
4 Internal mast guy boomers
12V battery installed in
battery box
Highway equipment includes:
Headlights
Front and rear turn signals
Clearance lights
Reflectors
Stop & taillights
License plate bracket
Mud flaps behind rear tires
Air horns
One-man cab with heater, defroster, windshield washer & wiper
Two - bus type rear view
mirrors
Adjustable bucket seat with
shock absorber mounts & seat belt
The cab instrument panel
consists of the following instruments: voltmeter, engine oil pressure gauge,
tachometer, speedometer, fuel gauge, water temperature gauge, and transmission
converter oil temperature gauge
Engine driven compressor
o System includes hoses,
fittings, air lines, regulators, and gauges
o 12V electric system for all
instrument lights including wiring, & switches
PLATFORMS WITH HANDRAILS ON
OPERATOR SIDE
Hinged platforms run full length on operator's side of unit, at
bed level. Handrails are attached to the platforms on the operator's side of the
rig and a stairway, with handrails, from platform to ground is included.
Platforms are approximately 2-0 wide.
100 GALLON FUEL TANK
Two each 100 gal. fuel tanks, side mounted on carrier frame
FRONT TIRES (FOUR 445/65R /
22.5)
4 front tires 445 x 65 R x 22.5
16-ply duplex highway treads
Rated at 39,500LB (17.69Mt)
All tires are inflated to 110psi
Disc wheels
REAR TIRES 12 Each 12R x 22.5,
16 PLY
Twelve 12R x 22.5, 16 ply, all-purpose tubeless rear tires
Rated at 49,120Mt (22.28 Mt)
All tires inflated to 100 psi
Disc wheels
DEADLINE ANCHOR (HERCULES 118
TYPE)
Standard Hercules 118-type anchor, with line clamp to fit the
deadline used on the rig, attaches directly to carrier frame.
50 GPM (190Lpm) HYDRAULIC SYSTEM
The hydraulic system is designed to operate at a maximum of
2,500psi and 50 gpm (190Lpm) @ 2,100 rpm.
Its pump is PTO driven by the transmission. An air-activated
clutch provides pump engagement and disengagement.
The system includes installation of a 195-gal (757L) hydraulic
oil tank with filler cap, breather and a combination oil level/oil temperature
gauge. Also included are manual shutoff valves in the pump suction line, in the
pressure line from pump to various control valves and pressure ports, and in the
return line from filter to tank.
CONTROL CONSOLE
The rigs control console is located at the operator's position
near the mast providing good visibility of wellhead, traveling block, and work
area.
Console includes:
Main drum control consisting
of mechanical brake lever
Air operated clutch control
for main drum
Air operated hand control for
engine throttle valve
Hydraulic and air pressure
gauges
Transmission shift controls
Standard engine shutdown
Operator platform
FOUR HYDRAULIC JACKSCREWS
Four hydraulic leveling jacks, two mounted in the rear bumper,
and two mounted at the mid-point of the rig remove weight from the truck axles
and provide greater lateral stability. Each jack has an adjustable support screw
with a locking nut feature to remove hydraulic pressure from the cylinder while
the rig is in use.
ENGINE ASSEMBLY
Cat C-15 with 540hp@2100rpm
with limiting speed governor
Air throttle actuator
SAE #1 flywheel housing
Exhaust diverted to
off-operator side with 85db muffler & spark arrestors
Permanent type anti-freeze
Dry type air cleaner
Lube & fuel filters 24cfm
(11328 cm2/sec), air compressor driven from engine
75A/12V alternator
12V electric starting and
additional air start combo.
High ambient radiator & fan
for 60C rating
Overspeed emergency shutdown
Engine oil pressure gauge and
water temperature gauge
ELECTRIC STARTING SYSTEM (12
volt)
Rig is equipped with a 12V electric starting system that includes
a starter and 12V battery mounted in recessed battery box with above deck
access.
TRANSMISSION Allison 5860
Rebuilt
Allison 5860 six-speed
transmission with converter with oil cooler, including a straight through
with a disconnect clutch for the drawworks with air over
hydraulic dual controls and electric indicators
Power shift from cab and rear
control
DRAWWORKS, DOUBLE DRUM MODEL
550/4212-42
MODEL 42x12 MAIN DRUM WINCH
ASSEMBLY
Full air three plate, clutch outside drawworks frame. Brakes are
42"(106.7cm) diameter x 12"(30.5cm) wide, lined with 1-1/8"(2.9cm) x 12"(30.5cm)
x 12"(30.5cm) API drilled brake blocks, full wrap, dead-end equalized. Brake
rims are removable with rings for splash water-cooling.
Brake operation shafts are mounted on ball bearings, these are
self-energized type for positive application and release by operator. Drum
barrel is 22"(55.8cm) diameter x 38"(96.5cm) long, mounted on double row
self-aligning spherical roller bearings on a 6 1/2"(16.5cm) drum shaft. Two line
pockets provided in the drum. Lebus grooving installed for 1 wireline to assist
in spooling and to reduce line wear.
Single line pull is 42,500LB, 2nd
layer in first gear @115 psi .
MODEL 42x8 SANDLINE DRUM
Full air double plate 24"(60.9cm) clutch
Brakes are 42"(106.6cm) diameter x 8"(20.3cm) wide lined with
1"(2.5cm) x 8"(20.3cm) x 12"(30.5cm) API drilled brake blocks, full wrap,
dead-end equalized. Brakes are removable with rings for splash water-cooling.
5 3/4"(14.6cm) drum shaft mounted on double row self-aligning
spherical roller bearings, drum barrel is 16"(40.6cm) diameter x 43"(109.2cm)
long.
Full drum capacity of 9/16"(1.4cm) wire line is 14,600'(4450m),
or 11,900'(3627m) of 5/8"(1.6cm) line.
SANDLINE DRUM CONTROL
Sandline drum controls consisting of a mechanical brake lever, a
combination air clutch and an engine throttle valve are located on the
operator's side of the winch. An engine emergency kill switch is located in the
control panel along with a clutch control valve.
LUBRICATION
Centralized lubrication system to all bearings and brake linkage
on drawworks. For ease of servicing, all grease fittings on drawworks are
located outside frame.
BRAKE WATER COOLING
Includes air-pressurized water system with 60gal (227L)
reservoir, filler, air and water piping from reservoir to main drum brake rims.
Water piping is complete with control valve at operator's
position. A cutoff valve is also at reservoir to shut off all pressure to tank.
RIGHT ANGLE GEAR BOX
Heavy-duty, right angle gearbox with oil-bath lubrication for
gears and bearings.
Includes installation on carrier frame, input torque shaft from
transmission to gearbox and powershaft from gearbox to drawworks drive sprocket.
ASA-140-2 (1-3/4") pitch, double-strand roller chain on the final
drive to the main drum
All chains are in oil-bath case outside the drawworks frame. A
window in side of the chainguard provides an oil level check.
HYDROTARDER
Model 202 hydrotarder, or equivalent with two plate air clutch,
oil bath chain drive, chains and bearings. 325 gal. water tanks, lines, valves,
and plumbing installed on rig. Hydrotarder, includes air controlled inlet valve
and piping for water.
HANDLING WINCH
Hydraulic powered planetary winch 8,000 lb. Rated line pull @
100 f.p.m. and 2,000 psi. Rating is for first wrap on drum. 325 ft. of ½ line
provided with winch. (Fail-safe brake, winch pull-in and run-out is
hydraulically powered.) Winch sheaves provided in crown. Winch controls are
located at rear of unit near operators console.
OPEN FACE TUBING MAST-LCI
104/250K
MAST: 104/250K OPEN FACE TUBING
MAST
The mast has a 104 clear working height with an API rated static
hook load of:
250,000 LB with 8 lines strung
225,000LB with 6 lines strung
Open face tubing mast is designed to withstand a wind of 69mph
from any direction provided the four jacks on the vehicle are properly deployed.
Telescoping tubing structural mast is designed and
constructed to API guidelines.
Constructed in two sections with the upper section telescoping
into the lower section for over-the-road position. Top section of mast
automatically latches to lower section, when extended. Lock control at base of
mast. Ladder to crows nest on crown. The mast is attached to its support frame
at the pivot point near the rig's rear bumper. It is supported during roading by
a rest (headache frame) near the front of the rig. Each leg of the lower section
contains an adjustable support screw. Mast has large girts and braces that do
not extend inside, for extra block clearance. Mast includes installation, front
rest and two internal load lines to rig from crown.
CROWN
Crown arrangement for 6 or 8 line string-up with conventional
block to hang flat with mast:
Three -24 (60.8 cm) diameter sheave cross-mounted, grooved 1
(2.86cm)
Two - Hydraulic tong sheaves, grooved 3/8 (.95 cm).
One - Auxiliary winch sheave, grooved 1/21.3 cm).
One - 24 diameter sandline sheave grooved 9 1/16
Crown sheaves are steel with flame hardened grooves. Sheaves are
mounted on Timken tapered roller bearings. Fittings are provided for individual
greasing of bearings. Crows nest (crown platform) provided for safety when
servicing crown sheaves, floor of expanded metal, handrails and toe boards
around crown with entrance at ladder. Attachments for two internal guylines from
crown to rig are provided on crown beams.
TUBING BOARD
Tubing board, of all welded
construction, is automatically lowered into working position as mast is
telescoped up and is raised into folded position as mast is telescoped down for
roading.
Tubing board fingers are
adjustable for 18,360 (5596m) of 2-7/8 (7.3 cm) tubing, or 11,520 (3511m) of
3-1/2 (9 cm) drill pipe for end tubing.
Tubing board is mounted at 55
(16.8m) above ground for tubing doubles.
A 26 (.6m, 15.2 cm) wide
monkey board/walkway is included.
Handrails are installed around
the tubing board for safety
MAST CONTROLS
Raising, lowering and telescoping controls are installed at
operator's position near base section of mast.
RAISING, LOWERING & TELESCOPING
Mast is hydraulically raised and scoped by hydraulic cylinders,
and upper section is extended by unlocking upper section from lower section and
extending until the spring latches snap into operating position.
Mast is retracted in like manner.
Mast locking pins shall be painted orange.
II. RIG ADDITIONS
CROWN-O-MATIC
Drawworks model crown saving device includes installation on rig
drawworks.
MAST GUYLINES
Four 5/8 (1.6 cm) - 6x37 IWRC wire rope guyline to ground from
derrick - 2 required for top-front of crown and 2 required for top-rear of
crown. Two 9/16 (1.4 cm) - 6x37 IWRC wire rope guylines from tubing board to
ground.
Guylines include thimbles, clips, and tail chains and grab hook.
Six heavy-duty walking load binders for 1/2 (1.3 cm
CATHEADS, DRILLER'S
CONTROL CONSOLE, CROWN-O-MATIC SKYTOP-BREWSTER N-46 SINGLE DRUM DRAWWORKS, LEBUS
GROOVED FOR 1 1/4" WIRELINE, FOSTER MAKE-UP & BREAK-OUT
PARMAC V-80
HYDROMATIC BRAKE
SKYTOP-BREWSTER INLINE 2-ENGINE COMPOUND WITH
(2) CATERPILLAR D3408 DITA DIESEL ENGINES, RADIATORS, AIR START, (2) ALLISON
TC-955 TORQUE CONVERTERS, (2) AIR COMPRESSORS
SKYTOP-BREWSTER SB131-550 CANTILEVER BEAM LEG
MAST, 550,000 LBS GNC, (10 LINES), 18' 6" LEG SPREAD, RACKING BOARD, 5-SHEAVE
CROWN BLOCK ASSEMBLY WITH FAST LINE SHEAVE, STANDPIPE WITH (1) OTECO 4" 5,000
PSI GATE VALVE, (1) OTECO 2" 5,000 PSI GATE VALVE, (1) OTECO MODEL 7 PRESSURE
GAUGE, 0-,6000 PSI, WITH MAST STAND
SKYTOP-BREWSTER 16' H x 25' W x 44' L (52' 6"
OAL) BOX-TYPE SUBSTRUCTURE, COMPLETE WITH STAIRS, HANDRAILS, TYPE "D" DEADLINE
ANCHOR AND V-DOOR
(10' H BOXES & (2) 6' H PONY BOXES)
GARNER-DENVER RT-22 1/2" ROTARY TABLE, 22 1/2"
x 53 1/4" CENTERS, WITH MSPC MASTER BUSHING
VARCO HDP KELLY DRIVE BUSHING WITH 4 1/4" SQ.
ROLLER ASSY
SKYTOP-BREWSTER 7SX ROTARY SWIVEL, 300 TON
CAPACITY
(1) SET, 2 3/4" x 108" ELEVATOR LINKS, 350 TON
CAPACITY
CATWALK
H-T F-1000 (EMSCO TYPE) 1,000 INPUT H.P.
TRIPLEX PUMP; BELT DRIVEN WITH BELT GUARD, POWERED BY CAT D399 DIESEL ENGINE,
32CB500 DUAL CLUTCH WITH GUARD, RADIATOR, AIR STARTER, WITH 20 GALLON 5,000 PSI
PULSATION DAMPENER, STRAINER BLOCK, OTECO 4" 5,000 PSI GATE VALVE, OTECO 2"
5,000 PSI GATE VALVE, OTECO 3" SHEAR RELIEF VALVE, MISSION MAGNUM 5" x 6"
CENTRIFUGAL PUMP POWERED BY 50 H.P. XP ELECTRIC MOTOR, LINER WASH PUMP (PINION
DRIVEN) WITH BELTS AND BELT GUARD; 300 GALLON FUEL TANK WITH FLOAT SENSOR, AIR
RECEIVER TANK; ABOVE MOUNTED AND UNITIZED ON A OILFIELD MASTER SKID
HHR F-1000 (EMSCO TYPE) 1,000 INPUT H.P.
TRIPLEX PUMP; BELT DRIVEN WITH BELT GUARD, POWERED BY CAT D399 DIESEL ENGINE,
32CB500 DUAL CLUTCH WITH GUARD, RADIATOR, AIR STARTER, WITH 20 GALLON 5,000 PSI
PULSATION DAMPENER, STRAINER BLOCK, OTECO 4" 5,000 PSI GATE VALVE, OTECO 2"
5,000 PSI GATE VALVE, OTECO 3" SHEAR RELIEF VALVE, MISSION MAGNUM 5" x 6"
CENTRIFUGAL PUMP POWERED BY 50 H.P. XP ELECTRIC MOTOR, LINER WASH PUMP (PINION
DRIVEN) WITH BELTS AND BELT GUARD; 300 GALLON FUEL TANK WITH FLOAT SENSOR, AIR
RECEIVER TANK; ABOVE MOUNTED AND UNITIZED ON A OILFIELD MASTER SKID
TOP DOGHOUSE WITH KNOWLEDGE BOX; (1) TOTCO
2-PEN DRILLING RECORDER; (1) AUTOMATIC DRILLER; (2) Q MARK HEATERS; CREW
LOCKERS; SKID MOUNTED
BOTTOM DOGHOUSE, WITH PARTS BINS, STORAGE
BINS; HAND TOOLS; MISC. RIG SPARE PARTS; CRIMPED WALL, SKID MOUNTED
GENERATOR HOSE WITH MCC MASTER PANEL;
TRANSFORMER; (1) CAT D3408 DIESEL ENGINE WITH CAT SR4 300 KW GENERATOR END; (1)
CAT D3406 DIESEL ENGINE WITH CAT SR4 225 KW GENERATOR END; (1) QUINCY 390 AIR
COMPRESSOR POWERED BY ELECTRIC MOTOR, RECEIVER TANK, BELT DRIVEN WITH BELT
GUARD, (1) MASTER 150,000 BTU HEATER, RIGID BC-810 CHAIN TONG (VISE), PEDESTAL
MOUNTED, ALL ABOVE UNITIZED AND MOUNTED INSIDE GENERATOR HOUSE, THREE RUNNER
OILFIELD MASTER SKID
MUD SYSTEM: 900 BBL
TOTAL CAPACITY WITH:
450 BBL CAPACITY SHAKER TANK; CRIMP WALL; WITH
(2) NOV / BRANDT COBRA II LINEAR SHALE SHAKERS (REBUILT BY BRANDT - INSTALLED
JUNE 2008), (2) CONE DESANDER; (8) CONE DESILTER, FULL TANK LENGTH GRATED
WALKWAYS, HANDRAILS, STAIRS, VAPOR PROOF LIGHTING, MOUNTED ON A OILFIELD MASTER
SKID
450 BBL CAPACITY SUCTION TANK; CRIMP WALL;
THREE PARTITION; (1) PILL TANK; WITH (2) MCM 6" x 8" CENTRIFUGAL PUMPS POWERED
BY 75 H.P. XP ELECTRIC MOTORS WITH BELTS & BELT GUARD (PORCH MOUNTED); (1) MCM
6" x 8" CENTRIFUGAL PUMPS POWERED BY 75 H.P. XP ELECTRIC MOTOR WITH BELTS & BELT
GUARD (INSET MOUNTED);(2) MUD AGITATORS POWERED BY 5 H.P. XP ELECTRIC MOTORS;
FULL TANK LENGTH GRATED WALKWAYS, HANDRAILS, STAIRS, VAPOR PROOF LIGHTING,
MOUNTED ON A OILFIELD MASTER SKID
10,000 GALLON FUEL TANK, WITH 4-COMPARTMENT
LUBESTER, SKID MOUNTED
500 BBL WATER TANK, WITH (2) CENTRIFUGAL PUMPS
POWERED BY 25 H.P. ELECTRIC MOTORS; SKID MOUNTED
CIW TYPE "SS" 13 5/8" 3,000 PSI DOUBLE
HYDRAULIC BLOWOUT PREVENTER, STUDDED TOP & BOTTOM
MODEL YG-0320-4 (KOOMEY TYPE 80) CLOSING UNIT
(NEW 2006), 4-STATION WITH REMOTE PANEL; (8) 11-GALLON ACCUMULATOR BOTTLES; (1)
TRIPLEX PUMP POWERED BY ELECTRIC MOTOR, CHAIN DRIVEN WITH CHAIN CASE, (2) AIR
PUMPS, XP STARTER PANEL, SKID MOUNTED
CHOKE MANIFOLD WITH (3) 4 1/16" 5,000 PSI W.P.
GATE VALVES; (5) 2 1/16" 5,000 PSI W.P. GATE VALVES; (1) ADJUSTABLE CHOKE; (1)
POSITIVE CHOKE; (1) 4-WAY CROSS; (1) BUFFER TANK ; (1) PRESSURE GAUGE; WITH
SINGLE POINT LIFTING EYE BRACKET; SKID MOUNTED
36H x
510W x 38L 2-Section Catwalk w/ Steel Deck & Steps
(3) 36H x
6W x 38L Pipe Tubs
(2) 28H x
6W x 38L Pipe Tubs
Electric/Hydraulic Wireline Measuring Device
Rathole &
Mousehole
Fluorescent
& Mercury-Vapor Rig Lights w/ Wiring
3000 1
1/8Drill Line (New), Spool & Stand
PIPE
RACKS
2 Sets of
(4) 36H x 34L Triangular Pipe Racks
2 Sets (2)
36H x 11L Triangular Pipe Racks
(no drill
string with rig)
Extensive work done to make rig work ready, including new wiring and lighting,
new plumbing (air, fuel, water, hydraulic), all structural repairs to the main
components and repairing or replacing ladders, steps, handrails, and sheet
metal, repairing, rebuilding and servicing all power units, pumps and drawworks
as necessary, doing all cosmetic repairs including sandblasting, cleaning and
painting.
BRAKE
PARMAC 15 DR Double Hydromatic Brake Drawworks Mounted
ENGINES
(2) CAT 3406 Diesel Engines, (1) w/ Air Starter & (1) Electric Motor Starter,
Each w/ NATIONAL C-195-64-FH Torque Converter, Air Clutches, Each Skidded & 300
HP
MAST
Lee C. Moore, 127H x 15W Cantilever Mast 340,000 SHL, Pin-Type, 4-Sheave Crown
(Includes Fastline), 11/8 Line, Crown Safety Platform, Racking
Board, Pipe Boom, Tong Counterweights, Derrick Climber, Ladder, Deadline Anchor,
4 Standpipe, Standpipe Manifold 2/4 & 2 Gate Valves, Type D 3000# Pressure
Gauge & Mast Stand
SUBSTRUCTURE
10H x 186W x 40L Box-on-Box Substructure 400,000# SHL, w/ V-Door, Stairs,
Safety Rails, w/ Drop in Floor Plates
PUMPS
National
K500A Duplex Mud Pump; 500-HP, 71/4 x 15, Forged Steel Fluid End w/
Quick- Change Valve & Cylinder Head Caps, CONTINENTAL-EMSCO Pulsation Dampener,
OTECO 2 Shear Relief Valve, Drive Assembly, Master Skidded, Powered By CAT 3412
Diesel Engine w/ Air Starter, Air Clutch & Skidded.
IDECO
MM-600 Duplex Mud Pump;, 600-HP, MATCO Forged Steel Fluid End w/ Quick-Change
Valve & Cylinder Head Caps, HYDRIL K-20 3000# Pulsation Dampener, OTECO 2 Shear
Relief Valve, Type D 3000# Pressure Gauge, Drive Assembly, Master Skid, p/b CAT
379 Diesel Engine w/ Air Starter, Air Clutch, Skidded Belt Drive Package;
ROTATING EQUIPMENT
IDECO 175-F Rotary Table, 171/2 x 44, w/ Split Master Bushing,
185-Ton Rotary Swivel, 41/4 x 41L Square Kelly w/ BAASH-ROSS Kelly
Drive Bushing, Square Drive in Rat Hole Sock.
34H x 8W
x 36L Pipe Tub w/ 40W Steel Deck Catwalk w/ 10 Extension & Steps
(4) 30H x
7W x 40L Pipe Tubs, (1) w/ (2) top-Mounted Removable Pipe Racks
Electric /
Hydraulic Wireline Measuring Device
Rathole &
Mousehole
Fluorescent
& Mercury-Vapor Rig Lights w/ Wiring
Drill Line
Spool & Stand
PIPE
RACKS
2 Sets (4)
42H x 28L Triangular Pipe Racks
(no drill
string with rig)
Extensive work done to make rig work ready, including new wiring and lighting,
new plumbing (air, fuel, water, hydraulic), all structural repairs to the main
components and repairing or replacing ladders, steps, handrails, and sheet
metal, repairing, rebuilding and servicing all power units, pumps and drawworks
as necessary, doing all cosmetic repairs including sandblasting, cleaning and
painting.
United U34 drawworks (275 hp) Lebus grooved, makeup and breakout
catheads, air drillers console controls, unit single engine compound drive,
National C250 (newly rebuilt) duplex mud pump, fuel tan, mud tank
ENGINES
(2) CAT 3406 Diesel Engines, Each 400-HP, (1) w/ Air Starter & (1) w/ Electric
Starter Each w/ ALLISON 625 Torque Converter, Air Clutch & Each Skidded.
MAST
LEE C. MOORE 127 X 15 Cantilever Mast, 348,000# SHL, Pin type, 1-1/8 line,
Crown Safety platform, Racking board, Pipe boom, Counterweights, Derrick
Climber, Ladder, Deadline Anchor, 4 Standpipe, Standpipe Manifold w/ 4 & 2
Gate Valves, Type D 3000# Pressure Gauge & Mast Stand.
SUBSTRUCTURE
12H x 25W x 38L Box-on-Box Substructure w/ V-Door, Stairs, Safety Rails & Pin
in Spreader.
7W x 24L
Doghouse w/ Round Top, 5L Covered Porch Extension, 2L Skid Extension,
Knowledge Box, Lockers, Bench Storage, Cabinets, Fluorescent Lights & Heater
(Cantilevers down Into Water Tank)
GENERATORS / FUEL TANK
8Dia x
42L Fuel Tank, Skidded w/ 3L Skid Extension at One End w/ (1) Electric Fuel
Pumps & 8L Extension w/ (2) CAT 155 KW AC Generators, Each p/b CAT 3306 Diesel
Engine & Skidded.
QUINCY 325
Air Compressor p/b HP Electric Motor
All Above
Mounted on the End of 7W x 42L 6000-Gallon Fuel Tank w/ Round Top, Fluorescent
Lights & Skidded.
MUD
SYSTEM
6H x 12W
x 60L 2 Tank Package, 650-Barrel Mud Tank w/ (4) Compartments, LIGHTING Mud
Mixer, MARTIN-DECKER Pressure Gauge, Top-Mounted Walkways, Stairs, Safety Rails,
Single Screen Vibrating Shale Shaker p/b Electric Motor & Skidded.
56H x 7W
x 15L 100-Barrel Premix Tank w/ Single Compartment, V-Bottom, 7L Skid
Extension, (2) MISSION Magnum 6 x 8 Centrifugal Pumps, Each p/b 75 HP Electric
Motor, 44L Skid w/ 75W x 21L Mud House w/ Round Top, Mud Hopper &
Fluorescent Lights.
WATER
TANK
6H x 8W x
42L 350-Barrel Water Tank w/ Crimped Sides
42H x 68W
x 44L 2-Section Steel Deck w/ Catwalk & Steps
(3) 28H x
7W x 38L Pipe Tubs
40H x
66W x 38L Pipe Tub
Electric /
Hydraulic Wireline Measuring Device
Miscellaneous Changeover Subs
GRIZZLY
Wireline Guide w/ (6) Rollers
Rathole &
Mousehole
Fluorescent
& Mercury-Vapor Rig Lights w/ Wiring
Drill Line
Spool & Strand
PIPE
RACKS
2 Sets (4)
42H x 30L Triangular Pipe Racks
(no drill
string with rig)
Extensive work done to make rig work ready, including new wiring and lighting,
new plumbing (air, fuel, water, hydraulic), all structural repairs to the main
components and repairing or replacing ladders, steps, handrails, and sheet
metal, repairing, rebuilding and servicing all power units, pumps and drawworks
as necessary, doing all cosmetic repairs including sandblasting, cleaning and
painting.
All Mounted in 38L Round Top
Utility House w/ Crimped Sides, 42L
MUD SYSTEM
3-400 Barrel, 3-Tank Mud System w/ (1) Shale & (2) Suction Tanks.
WATER / FUEL TANKS
66 Dia x 30L 6000-Gallon Fuel Tank, 400 BBL Water Tank w/ Pump Package
HANDLING TOOLS
Type B Rotary Tongs w/ Heads
5 Drill pipe Elevator
5 Drill Pipe Slips
51/2 Drill Collar
Slips
AUXILIARY EQUIPMENT
Electric / Hydraulic Wireline
Measuring Unit
3-1/2 x 60 Kelly Hose
Catwalks
Rathole & Mousehole
PIPE RACKS
(4) Pipe Racks
(no drill string with rig)
Extensive work done to make
rig work ready, including new wiring and lighting, new plumbing (air, fuel,
water, hydraulic), all structural repairs to the main components and repairing
or replacing ladders, steps, handrails, and sheet metal, repairing, rebuilding
and servicing all power units, pumps and drawworks as necessary, doing all
cosmetic repairs including sandblasting, cleaning and painting.
GENERATORS
(2)- 155KW Cat 3306 Generators, Above Mounted in 8W x 35L Utility house w/
Round Top, Fluorescent Lights, Change house, 60gl-5HP Air Compressor (NEW),
Skidded.
MUD SYSTEM
4H x 10W
x 20L Mud Suction Tank w/ (3) Compartments, Flat Bottom, top-Mounted Walkways,
Stairs, Safety Rails, Single, Single Screen Vibrating Shale Shaker p/b Electric
Motor & Skidded.
(1) 5H x
7W x 21L Premix Tank w/ 12L Covered Skid Extension, 2 each MISSION 5x6
Centrifugal Pumps w/50HP Electric Motor, Skid Mounted.
WATER/FUEL TANKS
6H x 7W x
20L 350-Barrel Water Tank, 18L Tool Room, All Mounted on 38L Skid
Wireline
Measuring Device, p/b Air Cooled Gas Engine
(3) 36H x
8W Pipe Tubs
Fluorescent
& Mercury-Vapor Rig Lights w/ Wiring
PIPE
RACKS
2-Sets (4)
36H x 25L Triangular Pipe Racks
1-Set (2)
36H x 15L Triangular Pipe Racks
(no drill string with rig)
Extensive work done to make
rig work ready, including new wiring and lighting, new plumbing (air, fuel,
water, hydraulic), all structural repairs to the main components and
repairing or replacing ladders, steps, handrails, and sheet metal, repairing,
rebuilding and servicing all power units, pumps and drawworks as necessary,
doing all cosmetic repairs including sandblasting, cleaning and painting.
77W x
20L Round Top Doghouse w/ Knowledge Box, Parts Cabinets, Bench Storage & (10)
Lockers
120-Barrel
Water Tank
All Above
Mounted on 1973 FONTAINE 40L Tandem Axle Float Trailer w/ Inverted 5th
Wheel, Front Landing Dolly, 10.00x20 Tires & DAYTON Wheels
HANDLING TOOLS / RELATED EQUIPMENT
BJ Type C
Rotary Tongs w/ Extra heads
(2) BJ 41/2
BN Elevators
85/8
Side Door Elevator
(2) Sets of
41/2 Drill Pipe Slips
10-Segment
Drill Collar Slips
Casing
Slips
Assorted
Changeover & Lift Subs
MARTIN-DECKER 380,000Lb. Weight Indicator
3 x 42
Kelly Hose
3 x 12
Vibrator Hose
8 x 10
Suction Hose / Pipe
PIPE
RACKS
(2) 42 H x
30L Triangular Pipe Racks
(2) 60H
T-Type racks
(no drill
string with rig)
Extensive work done to make rig work ready, including new wiring and lighting,
new plumbing (air, fuel, water, hydraulic), all structural repairs to the main
components and repairing or replacing ladders, steps, handrails, and sheet
metal, repairing, rebuilding and servicing all power units, pumps and drawworks
as necessary, doing all cosmetic repairs including sandblasting, cleaning and
painting.
15,000
Electric / Hydraulic Wireline Measuring Unit
31/2x
55 Kelly Hose, (2) 31/2 Vibrator Hoses, Upper & Lower Kelly Valves
42H x 60L
Catwalk, 3-Sets (4) Pipe Racks
(1) 1/8 x
5000 Drilling Line w/ Stand, Ό Spool of Line Remaining
Rig Lights
w/ Wiring
20-
Sections of rig Matting w/ Lifting Eyes
RIG
BOILER
1-150HP
Diesel Fired Boiler Package, Steam Heaters, in Steel Skidded Building
(no drill
string with rig)
Extensive work done to make rig work ready, including new
wiring and lighting, new plumbing (air, fuel, water, hydraulic), all structural
repairs to the main components and repairing or replacing ladders, steps,
handrails, and sheet metal, repairing, rebuilding and servicing all power units,
pumps and drawworks as necessary, doing all cosmetic repairs including
sandblasting, cleaning and painting.
depth capacity 2500 with 3-1/2
drill pipe, 5000 with 2-3/8 drill pipe, mounted on dual wheel tandem axle
trailer, 180 hp diesel engine, 65 x 133,000# hydraulically telescoping mast,
18 rotary table, bottleneck drill pipe, blow out preventors, located Middle
East Price: $250,000 -
American single drum drawworks,
Air clutch, 12 Kelco cat head, Hydraulic breakout, 7/8 drilling line, 65 x
150,000# single piece mast hydraulically raised, Mounted on tandem axle trailer
with leveling jacks, Cat walks, 8V71 Detroit diesel on deck with Twin Disk
torque, 12 Brewster table with table bushings, New air rotary clutch, 7-1/4 x
10 Gardner Denver duplex mud pump (new fluid end parts) powered by 6V73 Detroit
diesel, 38 square Kelly, S-3 Brewster swivel
Triple drum drawworks with air
clutches, Manufactured 1982, 60 x 150,000# hydraulically raised mast, Mounted
on 4 axle carrier w/ 350hp Cummins diesel engine, 5 hydraulic leveling jacks,
18 rotary table, Hydraulic pulldown system available and not installed, Fold
down walkways, Explosion proof derrick lights, Rebuilt 2006 at a cost of
$500,000, Never used
Manufactured 1975, double drum,
mounted on 4 axle Crane Carrier with 350 Cummins diesel engine, new tires, new
hoses and bearings, 56 x 150,000# hydraulically raised mast, racking board.
National C-150 duplex mud pump 7-1/4 x 12 with Detroit 6V92 diesel engine
mounted on oilfield skid. 2500 of 3-1/2 x 30 drill pipe, (3) coolers 5-3/4 x
30 with 4-1/2 IF conn, 4-1/2 x 34 round fluted kelly, kelly bushing
