SUN MACHINERY CORP.

Call: 516-536-7375 / 516-536-7317 fax

OILFIELD COMPONENTS

INVENTORY FOR 1200 HP RIG (Ref#3180N)

20’ box on box sub, 11’ top 9’ pony

133’ Lee C. Moore derrick, Gross Nominal Capacity 620,000#

10 lines 413,000 capacity, leg spread 21’

8’ x 8’ x 40’ top doghouse

2 - 8’ x 10’ x 21' mud pits

1 – 8’ x 10’ x 23’

4’ x 6’ shale shaker

M-55 Bethlehem drawworks with 2 engine compound

2 – 210 blb tank mounted on 36’ skid for fuel

Price: as is, where is: $1,500,000

BOWEN 3.5 POWER SWIVEL (NEW, NEVER USED) (ref#9921) powered by C7 Cat engine, mounted on new oilfield skid, hydraulic hose reels, 120 ton hook/load capacity, 100’ 4-wire pressure hose, 100’ 2-wire return hose, remote control air powered w/100’ hydraulic and air line, Sunstrand hydrauulic system, high pressure loop filter suction strainer, 10 micron return, 90 gallon hydraulic tank, 90 gallon fuel tank, 12V battery and battery box, swivel rack with hydraulic winch, elevator bail, manufactured from all new U.S. components with 1 year guarantee, Dimensions 234” long x 90” wide x 90” high – 13,500 lbs Price: $150,000

Optional 3-axle trailer trailer (similar to trailer made by National): $5,000

IMMEDIATELY AVAILABLE

BOWEN 2.5 POWER SWIVEL (NEW, NEVER USED) (Ref#9922)

New and Unused - Immediate Delivery

Mounted on skid, Cat 4.4 diesel engine, Sundstrand hydraulic system, 85 ton hook load capacity, power reels with 100’ 4-wire pressure hose, 100’ 2-wire return hose, remote control air panel w/100’ hydraulic and air line, Sunstrand hydraulic system, high pressure loop filter suction strainer, 12V battery and battery box, swivel rack with hydraulic winch, elevator bail, hydraulic winch, 90 gallon fuel tank, 50 gallon hydraulic tank, high pressure filter and return filters, new, manufactured from all new U.S. components with 1 year guarantee on package, manufacturer's guarantee on components

Mounted on 3 axle gooseneck trailer

Price: $105,000

IMMEDIATELY AVAILABLE (price includes delivery to Houston Port)

(3) BOWEN 3.5 POWER SWIVELS (Ref#1165N) Used, good condition, 120 ton, power pack, skidded, hydraulic hose reels, hydraulic tank, fuel tank, controls, weight 13,500# each, located SE Asia

Price each: $115,000 delivered to Houston

BOWEN S1 POWER SWIVEL (Ref#1597N) Manufactured 2009, No hours, Never used, mounted on skid, 4BT Cummins diesel engine, 30 ton, 90 gallon fuel tank, 50 gallon hyd tank, high pressure filter and return filters, 2-3/8” 8 round, 2-7/8” 8 round, 100’ hose on each reel, wireless remote radio control, electric winch, 1485 ft/lbs torque @ 2000 psi, 50 rpm (8:1) ratio 30 ton, 100 rpm 24 ton, auxiliary hydraulics. Immediately available Price: $75,000

BOWEN POWER SWIVEL (Ref#288N) Model 3.5, Manufactured in 1985, 120 ton hook load, Powered by Detroit 6V71 diesel engine, Skid mounted, (4) wire pressure hoses, (2) wire return hoses, Fuel tank, Hydraulic tank, Skid mounted, Complete Located in Europe, Price: $95,000

BOWEN 2.5 POWER SWIVEL (Ref#928N) Manufactured 1985, 85 ton, powered by 353 Detroit diesel, mounted on tandem axle gooseneck trailer, complee with all hoses, hydraulic tank, battery start, working unit Price: $70,000

BOWEN S2.5C POWER SWIVEL (Ref#14560) Manufactured 1990’s, 85 ton, Detroit diesel engine 35, 85 hp – 2800 rpm, located Europe Price: $85,000

(2) 2007 500 HP REVERSE UNIT TRAILERS “LIKE NEW” (Ref#356Nc)

Trailer, Year model 2007, 48’ Fontain
Triplex pump, Tulsa TT560, with chain reduction
Pump Engine, 60 series Detroit, 500 HP motor with control panel
Transmission, Allison HT750 with Wilson kit, shifter and actuator
Hydraulic engine, 3054 Cat
(2) MCM centrifugal pumps, 5X6 and 4X5 200 series
Stock tank, 75 bbl tank with sand catching trough, suction and dumps
Shaker, Derrick 4 x 5 motion shaker
Fuel Tank, 300 gallons
Flow Monitors, Turbine, model FM0208
Barrel Counter, Turbine
Control House, 6 x 6 x 8 steel house with window and heat
(2) 2007 POWER SWIVELS

Mounted on a dual axle gooseneck trailer 2.5 power swivel 3054 Cat engine power reels of 100 ft hydraulic 90 gallon fuel tank and 50 gallon hydraulic tank

Currently working

Price: $540,000 for each reverse unit which is composed of one pump and one power swivel.

REVERSE UNIT – KING SWIVEL/GASO PUMP (Ref#614N) Manufactured 2007, 25 ton King power swivel with Detroit 353 for hydraulics, 30 gpm hydraulic pump, 6V71 x Gaso 1650C pump (rebuilt gear end and fluid end), 50 bbl tank, 30’ hydraulically raised mast for hoses, mounted on 2 axle trailer Price: $90,000

IDECO H2500 (Ref#9802) Depth capacity 23,000’ (7000 meters) with 5” drill pipe,

Ideco H2500 drawworks with Elmagco 7838 brake, (3) Cat D398 diesels with compound

Ideco SBS 143-650-30 full view mast 143’ x 750,000# with 12 lines, 710,000# with 10 lines, 20,000’ of 5” DP racking capacity

Demag hydraulic operated stabbing platform

4” OD x 5000 psi standpipe, 4” ID x 5000 psi rotary hose

CCD 480 Crown Block 480 ton rated capacity, 7 sheaves: (1) 60”, (6) 55” for 1-3/8” wireline

Substructure 23’2” floor height, 705,000# casing capacity, 510,000# simultaneous cap of setback

Engine substructure to accommodate drawworks and 3 diesel engines with compound 9-1/2’ height

Ideco TBA 480-6-55 traveling block 480 ton, 6 sheaves, 55” x 1-3/8” wireline

Ideco SBS HK-480 hook, 480 ton, Ideco SBS TL 500 swivel, 500 ton

This package of components is available in Europe

Price: $650,000

IDECO DUAL RAMBLER RIG COMPONENTS (Ref#11112)

CROWN BLOCK Ideco crown block with sheave cluster. Dimensions: 6’H x 6’W x 6’L. Weight: 1 ton

Note: crown block can travel loose with one of the other loads plus there are a number of loose braces and attachments that weight about 1-T

MAST (DERRICK) Ideco telescoping angle leg mast, 136’ long x 16’ wide x 8’ wide, 30 T

MAST TRAILER trailer mounted on eight (8) 2400 x 29 tires, 24’ long x 18.5’ wide x 16’ high, 35 T

DRAWWORKS TRAILER, trailer mounted on eight (8) 2400 x 29 tires, 44’ long x 18.5” wide x 16’ high, 45T

PACKAGE PRICE: $375,000

CABOT 112’ X 365,000# MAST (Ref#12032) good condition Price: $200,000

NEW KINN DRAWWORKS (Ref#524N) similar to Kremco 4212, 600 hp, 42” x 12” main drum, 38” x 8” sandline drum, twin disk air clutches, long main shaft for secondary assist brake, never used Price: $180,000

YG225 250 TON HOOK/BLOCK COMBO (Ref#7256N) (5) 44” sheave with 1-1/8” groove, OR 1-1/4” groove (both available), 7.5” (190 mm) major hook opening, 7.1” (180 mm) spring travel distance, overall size 142” x 38” x 31” (3610 x 960 x 775 mm), 10,432 lbs (4,732 Kg), Block bearing (5) 10-7/8” OD x 8’ ID x 3-3/4”, main bearing (1) 16.5” x 11.8” x 3.74” Price: $61,000

HOOK/BLOCKS, SWIVELS, ROTARY TABLES, AND MUD SYTEMS (Ref#4632N)

Manufactured in China. Immediately available. Located in the US.

250 Ton Hook/Block - $79,000

150 Ton Hook/Block - $62,500

250 Ton Swivel - $48,500

17-1/2” Rotary Table - $52,500

225 bbl mud system with charging pump, complete - $140,000

Also available:

250 Ton McKissick Hook/Block - $135,000

15’ SUBSTRUCTURE AND 17-1/2” ROTARY TABLE (Ref#6940N) Price: $250,000

7.5 LW KING SWIVEL (Ref#13626Na) 7-1/2” ID, 150 ton capacity Price: $32,000

10” HEX KELLY (Ref#13626Nb) 6” ID, 35-45’ long with bushing Price: $25,000

SL225 SWIVEL (NATIONAL) (Ref#15577) 250 ton, Immediately available for shipment from China Price: $39,500

YG170 BLOCK/HOOK (Ref#15578) 188 ton, Max. hook load: 1700 KN, OD of sheaves 915mm / 36”, Number of sheaves: 5, Diameter of wire line: 29 mm / 1-1/8”, Major hook opening: 180 mm, Major hook dia.: 150 mm, Minor hook dia.: 90 mm, Overall dimensions: 3294 x 960 x 713mm, Weight: 4585 kg, Immediately available for shipment from China Price: $49,500

RT375 ROTARY TABLE (NATIONAL) (Ref#15576) 37-1/2” opening, Table axle center inner row sprocket teeth: 53-1/4”, Max. static load rating: 5850 KN, Max. working torque: 33000 KN.M (24,354 ft/lbs),Max. rotating speed: 300 rpm, Gear ratio: 3.56, Overall dimensions: 2468 x 1810 x 718 mm, Weight: 7548 kg, Master bushing (hinged pin drive type) for 37-1/2” National rotary table, Immediately available for shipment from China Price: $85,000

17-1/2” rotary table (Ref#15576b) Price: $75,000 delivered to Houston, immediately available

GARDNER DENVER 27-1/2” ROTARY TABLE (Ref#14561) good used, located Europe Price: $37,000

BOP CONTROL SYSTEM (Ref#8134Na)

Located in USA.

4-STATION ACCUMULATOR

NEW SKID: 8’2” X 6’8” WIDE W/ LOAD HITCHES OR LIFT EYES @ EACH END

NEW TANK: 90 GALLON

WITH 2 EA. – 4” OIL CLEANOUTS; 1 EA. – 4” FLUID ADD; 4 EA. – 11-GALLON 3,000 WP X 1 ½” PORTED ADAPTERS (BLADDER TYPE) TOP LOAD BOTTLES. TOP LOAD DESIGN PERMITS FIELD REPAIR, BOTTLES W/ BLADDERS PER API/ASME CODE.

1 EA. – 6 ½” OD ACCUMULATOR MANIFOLDS – 100% MACHINED; NO WELDS; TO ACCEPT 4 EA. – 11-GALLON ACCUMULATOR BOTTLES; TOTAL 44-GALLON ACCUMULATOR CAPACITY. MANIFOLD RATED @ 6,000 PSI W.P. ACCUMULATOR BOTTLES ARE NITROGEN PRECHARGED @ 1,000 PSI+/- 5%

1 EA. – ¾” FULL FLOW – MANUAL MANIFOLD REGULATOR

1 EA. – ¾” FULL FLOW – MAUAL ANNULAR REGULATOR

1 EA. – 1” FULL FLOW PNEUMATIC OPERATED BYPASS VALVE

4 EA. – ¾” FULL FLOW PNEAUMATIC OPERATED OPEN/CLOSE VALVES

3 EA. – LIQUID FILLED, PANEL MOUNT GAUGES (MANIFOLD 6,000 PSI, ACCUMULATOR 6,000 PSI & ANNULAR 3,000 PSI)

1 EA. - UNION STYLE DUPLEX CHARGE PUMP; BELT DRIVEN BY 10HP EXP. PROOF ELECTRIC MOTOR W/ DRIVE GUARD (BELT KEVLAR – GEAR DRIVE TYPE)

8 EA. – 1” SCHEDULE 160 OPEN/CLOSE LINES – DISCHARGING @ BACKSIDE OF BOTTLES

1 EA. - SPRECHER SCHUH EXPLOSION PROOF START/STOP CONTROL BOX

1 EA. – PRESSURE SWITCH HI/LO SHUT-OFF EXP. PROOF

1 EA. – 60:1 PNEUMATIC OVER HYDRAULIC FLUID PUMPS

1 EA. – PNEUMATIC MANIFOLD INLET W/ MOISTURE CONTROL SYSTEM, W/ OILER SYSTEM

1 EA. – PNEUMATIC REGULATOR

ALL PNEUMATIC 1/8” STAINLESS STEEL HIGH PRESSURE WITH STAINLESS STEEL CONNECTORS

ALL ATTACHED TO 1 EA. – ALUMINUM UMBILICAL RECEIVER PLATE

1 EA. – NEW 120 FT. UMBILICAL HOSE W/ RECEIVER PLATE AT EACH END

1 EA. – NEW 4-STATION CONTROL PANEL W/ AIR SUPPLY GAUGE, 4 EA. – PNEUMATIC/MANUAL OPEN/CLOSE VALVES, ALL W/ STAINLESS STEEL LINES & FITTINGS

NOTES:

· ACCUMULATOR & PANEL – SANDBLASTED TO WHITE METAL. TWO COATS ANTI-RUST PRIMER INSTALLED AND TWO COATS STANDARD RED PAINT.

· ALL MANUFACTURED PER API 16D STANDARDS

· COMPLETE W/ FUNCTION TEST

· COMPLETE WITH DATA BOOK & OPERATIONS MANUAL

Delivery 2-3 weeks

Price: $72,000

BOP CONTROL SYSTEM (Ref#8134Nb)

Located in USA.

6-STATION ACCUMULATOR

NEW SKID: 12’6” X 6.5’ WIDE W/ LOAD HITCHES OR LIFT EYES @ EACH END

NEW TANK: 280 GALLON

WITH 2 EA. – 4” OIL CLEANOUTS; 1 EA. – 4” FLUID ADD; 24 EA. – 11-GALLON 3,000 WP X 1 ½” PORTED ADAPTERS (BLADDER TYPE) TOP LOAD BOTTLES. TOP LOAD DESIGN PERMITS FIELD REPAIR, BOTTLES W/ BLADDERS PER API/ASME CODE.

4 EA. – 6 ½” OD ACCUMULATOR MANIFOLDS – 100% MACHINED; NO WELDS; EACH TO ACCEPT 6 EA. – 11-GALLON ACCUMULATOR BOTTLES, EACH MANIFOLD W/ VALVES TO ISOLATE EACH MANIFOLD 25% OF TOTAL VOLUME FOR FUTURE FIELD SERVICE/REPAIR. MANIFOLDS RATED @ 6,000 PSI W.P. ACCUMULATOR BOTTLES ARE NITROGEN PRECHARGED @ 1,000 PSI+/- 10%

1 EA. – ¾” FULL FLOW – MANUAL MANIFOLD REGULATOR

1 EA. – ¾” FULL FLOW – MAUAL ANNULAR REGULATOR

7 EA. – ¾” FULL FLOW PNEAUMATIC OPERATED OPEN/CLOSE VALVES

3 EA. – LIQUID FILLED, PANEL MOUNT GAUGES (MANIFOLD 6,000 PSI, ACCUMULATOR 6,000 PSI & ANNULAR 3,000 PSI)

1 EA. - UNION STYLE TRIPLEX CHARGE PUMP; BELT DRIVEN BY 20/25HP EXP. PROOF ELECTRIC MOTOR W/ DRIVE GUARD (BELT KEVLAR – GEAR DRIVE TYPE)

12 EA. – 1” SCHEDULE 160 OPEN/CLOSE LINES – DISCHARGING @ BACKSIDE OF BOTTLES

1 EA. - SPRECHER SCHUH EXPLOSION PROOF START/STOP CONTROL BOX

1 EA. – PRESSURE SWITCH HI/LO SHUT-OFF EXP. PROOF

2 EA. – 60:1 PNEUMATIC OVER HYDRAULIC FLUID PUMPS

1 EA. – PNEUMATIC MANIFOLD INLET W/ MOISTURE CONTROL SYSTEM W/ OILER SYSTEM

1 EA. – PNEUMATIC REGULATOR (ALL PLUMBED W/ STAINLESS STEEL SUPPLY LINES)

ALL ATTACHED TO 1 EA. – ALUMINUM UMBILICAL RECEIVER PLATE

1 EA. – NEW 120 FT. UMBILICAL HOSE W/ RECEIVER PLATE AT EACH END

1 EA. – NEW 6-STATION CONTROL PANEL W/ AIR SUPPLY GAUGE, 6 EA. – PNEUMATIC/MANUAL OPEN/CLOSE VALVES, ALL W/ STAINLESS STEEL LINES & FITTINGS

NOTES:

· ACCUMULATOR & PANEL – SANDBLASTED TO WHITE METAL. TWO COATS ANTI-RUST PRIMER INSTALLED AND TWO COATS STANDARD RED PAINT

· ALL MANUFACTURED PER API 16D STANDARDS

· COMPLETE W/ FUNCTION TEST

· COMPLETE W/ DATA BOOK & OPERATIONS MANUAL

Delivery 4-5 weeks

Price: $112,000

SHAFFER STYLE BOP (Ref#15646) All new, manufactured in China

SHAFFER STYLE DOUBLE BOP 7 1/16" x 5000#

Flanged top, flanged bottom, 2 sets rams: (1) blind, (1) pipe ram, Stainless steel ring groove, Set for H2S

(2) 4" outlets Price: $37,000

2 month delivery from China, 20% deposit with order, balance before shipment

also: a single ram BOP for $33,000

SHAFFER STYLE SPHERICAL (ANNULAR) BOP 7 1/16" x 5000#

Bolted cover, Stainless steel ring groove, Packing element (rubber) Price: $32,000

2 month delivery from China, 20% deposit with order, balance before shipment

BOP (Ref#12674)

Cameron Model U Double 13-5/8”, 10,000# flanged for pipe size 127, $92,000 certified

Cameron model U double, 11-1/32 10,000# flanged for pipe size 127, $90,000 certified

5 pairs of rams for Cameron Preventor 11-1/32 10,000# included

Upetrom (Romanian) annular 7-1/16, 700 (2 available) working condition $20,000 each

Upetrom double ram cavity, 11 x 700 (2 available) $20,000 each

Located Middle East

BOP PACKAGE (Ref#12323)

(3) 13-5/8” x 10,000# BOP - $80,000

(3) 11-1/32 x 10,000# - $75,000

Koomey control panel, Assorted valves, Prices include loading in container and delivered to Port.

Located in Middle East

NEW CHINESE BOP (Ref#7556N)

Product	Price
7-1/16”, 5Kpsi Shaffer type single ram BOP	$41,800
7-1/16”, 5Kpsi Shaffer type double ram BOP	$65,800
7-1/16", 5Kpsi Shaffer type annular BOP	$43,800
7-1/16" 10Kpsi Cameron U single ram BOP	$49,800
7-1/16" 10Kpsi Cameron U double ram BOP	$73,800
9", 3Kpsi Shaffer type single ram BOP	$29,800
9", 3Kpsi Shaffer type annular BOP	$39,800
11", 5Kpsi Shaffer type annular BOP	$54,000
11", 5Kpsi Shaffer type single ram BOP	$61,000
11", 5Kpsi Shaffer type double ram BOP	$84,800
11", 10Kpsi Shaffer type single ram BOP	$81,000
11", 10Kpsi Shaffer type double ram BOP	$114,800
13-5/8", 5Kpsi Shaffer type annular BOP	$74,800
13-5/8", 5Kpsi Shaffer type single ram BOP	$64,800
13-5/8", 5Kpsi Shaffer type double ram BOP	$105,000
13-5/8", 10Kpsi Shaffer type single ram BOP	$93,000

Located in USA

NEW BOP IMMEDIATELY AVAILABLE (Ref#936N)

Shaffer style BOPs - Located in Texas

Below is a list of new Shaffer style BOPs we have available. All new BOPs are manufactured by an API licensed facility in China and are 100% interchangeable with Shaffer. All rubber goods are US manufactured and verified 100% interchangeable during the comprehensive inspection and testing procedure at a US API 16-A facility. Data books and test charts are supplied with each preventor, along with a 1 year warranty.

Located in Texas.

(2) 11” 5M Shaffer style spherical – Price; $110,000 each

(2) 11” 5M Shaffer LWS style double, studded top x studded bottom w/ 4-4-1/16” 5M EFO – Price: $135,000 each

(2) 11”5M Shaffer LWS style single, studded top x studded bottom w/ 4-4-1/16” 5M EFO – Price: $95,000 each

(2) 13-5/8” 5M Shaffer style spherical – Price: $135,000 each

The following two BOP have been remanufactured:

(1) 13-5/8” 5M Shaffer spherical w/ 10M bottom – Price: $145,000

(1) 13-5/8” 10M Hydril GK – Price: $195,000

MARITIME HYDRAULICS AKER SOLUTIONS ELECTRICAL DRIVEN TOP DRIVE (Ref#6325N) PTD500, 800 hp AC motor, 690/400V/50 Hz, Torque Max/Count. 80,000Nm/46,000Nm, 12192mm long x 2438mm wide x 3896mm high, 6500 kg, sound level 69dB(A)@ 7 meters, 2150 operating hours Price: €1,300,000 (Euros)

VARCO TDS3H (Ref#14470) TDS3, PH60, reworked 1/2004, 1265 hours since overhauled, currently on rig in Middle East, available for sale Price: $300,000

DRILL PIPE

DRILL PIPE (Ref#12786N)

Used 4-1/2” drill pipe with 4-1/2” NC 46 connections, 16.6# G-105 R-2

(122 jts) x 31’ premium double white band 6”+ tool joints

Price: $25 per foot

Used 5” drill pipe with 4-1/2” NC50 connections, 19.5# G-105 R-2

(113 jts) x 31’ premium double white band 6-1/4” + tool joints

Price: $28 per foot

New 4” FH (NC40) x 95 #15.70 China Pacrim Pipes R-3

(190 jts) x 40’ – averable total 7600’

Inlaid hard banking, no coating

5-1/4” OD x 2-9/19” ID tool joints IU

Cut for a consistent length string

Price: $45 per foot

(Ref#3012Na) 700’ of 4-1/2” x 25’ Ingersoll Rand T4 drill pipe - $350 per joint

(Ref#3012Nb) 8” hammer with 10” bit, used one - $3,500

(Ref#3012Nc) 6” hammer with 8” bit, good condition - $2,000

(Ref#3137N) 625’ of 4-1/2” x 25’ Ingersoll Rand T4 drill pipe with 2-7/8” IF conn, good condition - $9,500

(Ref#10644N) 4000’ of Ingersoll Rand 4-1/2” x 30’ drill pipe, 2-7/8” IF conn Price: $500 per joint

(Ref#3456N) used 100 jts (2500’) 4-1/2 x 25’ IR T4 drill pipe ( 2-7/8 IF conn) - $450 per joint

(Ref#5902N) used 49 joints 4-1/2” x 30’ drill pipe (3-1/2 Reg thread), like new condition, not IR flats $550 each

(Ref#15248b) used Schramm T450 drill pipe

3-1/2” x 20’ @ $300 per joint (1,200’ available)

3-1/2” x 20’ like new (300’ available) Price on Request

(Ref#14632) 1550’ of IR T4 rods, with 2-7/8” thread, like new Price: $500 each

(Ref#2677N) 4-1/2” x 20’ flush joint (2-7/8” IF thread), 500’ available (400’ like new) Price on Request

(Ref#5049Nb) (15) 3-1/2” x 20’ flush joint with 2-3/8” IF conn Price on Request

(Ref#5947N) (24) 4-1/2” OD x 15’ length with 2-7/8 IF - 90%, used on Speedstar, flush wall pipe, 5” slots Price on Request

(Ref#4368N) (72) 4-1/2” x 20’ and (2) 4-1/2” x 10’, flush joint, upset style Price on Request

(Ref#13089b) New 200 joints of 4-1/2” x 30’ IR RD20 drill pipe with 2-7/8 IF conn, .337” wall thickness, internal upset Price: $800 per joint

(Ref#3288N) 2500’ of 4-1/2” x 25’ Ingersoll Rand drill pipe (3-1/2 Conn) Price: $300 per joint

(Ref#1251Nb) Drilltech pipe 4-1/2” x 20’ (4” conn), 300’ available Price on Request

(Ref#1251N) Chicago Pneumatic drill pipe 4-1/2” x 20’ (4” threads), 300+’ available Price on Request

(Ref#5012N) Schramm T64 drill pipe, 4-1/2” x 20’6” with 3-1/2 Reg, 400’ Price on Request

(Ref#6762Na) 800’ of 4-1/2” flush joint (3-1/2 IF conn), x 20’ drill pipe, “like new” only used on 6 wells

Also available: 6” and 8” EDM (IR Style) hammers

(Ref#9548N) Atlas Copco drill pipe, used 1-2 times, like new

2500’ of 4-1/2” x 30’ (2-7/8 IF)

2500’ of 4-1/2” x 30’ (3-1/2 Reg)

Price: $700 per joint

NEW DRILL PIPE MADE IN USA (Ref#14779N)

Ingersoll Rand, Schramm, Speedstar - 4-1/2” x 20’ - $525 per joint

Driltech 4-1/2” x 20’ - $575 per joint

Ingersoll Rand 4-1/2” x 30’ – heat treated and upset - $775 per joint (8,000’ available)

Ingersoll Rand 4-1/2” x 30’ non-heat treated - $725 per joint (4000’ available)

Ingersoll Rand 4-1/2” x 25’ Grade D - $700 per joint

DRILL PIPE (Ref#4617N) IR T4 style, 10” diameter x 25’ length, 7-5/8” Reg pin and box, .500 wall, includes adapters, wrenches and lifters Price: $15,000

DRILL PIPE (Ref#12628N) NEW 4-1/2” diameter x 30’ length x 2-7/8 IF conn, 8.55 mm for Ingersoll Rand RD20, located Dubai Price per joint: $950

(Ref#296N) 300’ of 10’ joints Mayhew Jr. internal/external flush Price on Request

(Ref#794N) 3000’ of 2-7/8” IF thread x 30’ long, bottleneck Price on Request

(Ref#8721Nb) 4-1/2” dia x 15’ with 2-7/8 IF (15) excellent condition (8) fair condition

(Ref#14867N) (250 jts) 3-1/2” x 20’ with 2-3/8” IF connections Price on Request

(Ref#7975N) 700’ of 20’ drill pipe with 2-3/8” IF, tandem pipe trailer Price on Request

(Ref#5750N) 300’ of 2-7/8” x 10’ Mayhew Jr. flush joint pipe Price on Request

(Ref#8153Nb) 2500’ of 3-1/2” x 30’ drill pipe, 3-1/2 IF, white band POR

(Ref#6013N) 2-7/8” IF x 20’ bottleneck pipe, approx 3500’ available Price on Request

(Ref#671Nb) 70 joints (1,400’) of 2-7/8” x 20’ bottleneck drill pipe Price: $300 per joint

(Ref#4074Nc) 960’ (48) of 4-1/2” x 2-1/2” x 20’ Matrix dual tube drill pipe Price on Request

54” CLUSTER DRILL (Ref#12460N) Ingersoll Rand, with (9) DHD380W hammers and (9) 10” bits. Also includes (9) spare bits (needs 5’ Calex pipe). Price: $65,000

INGERSOLL RAND 112, 12” HAMMER (Ref#4680Na)

Mission 12” hammer (Ref# 4680Nb)

TIGER TIERRA BANGER 612 CASING HAMMER (Ref#424N) Price On Request

(Ref#3012Nb) 8” hammer with 10” bit, used one - $3,500

(Ref#3012Nc) 6” hammer with 8” bit, good condition - $2,000

VARIOUS CASING. (Ref#12175)

33” x 5’

16” x 20’ (8,8,4)

24” x 14’ (10,4)

26” x 14’ (8,6)

28” x 30’ (15, 6.5, 8.5)

34” x 30’ (15, 8.5, 6.5)

40” x 30’ (15, 15)

46” x 10’

Price: $8,500

(15) AUGER BITS, sizes listed in inches. (Ref#12172)

54, 48, 42, 36, 36,

30, 24, 24, 22, 20,

18, 16, 16, 14, 12

Price: $7,500

(11) REAMERS sizes listed in inches. (Ref#12173)

12, 13, 16, 18, 20, 24,

27, 27, 34, 41, 47

24” extension for 3” hub (used with 12’ and 13’ reamers.)

Price: $7,500

DIRT AUGERS, ROCK AUGERS, BELLING TOOLS, CORE BARREL

AUGERS 18”, 24”, 30”, 84”, 96”, 36” Extension to 48”, 60” with 66” bands, 108” extension to 120”

ROCK AUGERS: 18”, 24”, 30”

BELLING TOOLS:

18” 45 degree

24” 60 degree

30” 60 degree

36” 60 degree

42” 60 degree

MISCELLANEOUS

72” core barrel

H20 STINGER CABLE TOOL WITH GIL BEETLE MAST (Ref#10266Nd) mounted on 1987 Ford F700, runs 10’ rods, all hydraulic, Perkins diesel engine Price: $70,000

Extra equipment: Beetle mast cylinder, arm cylinder, (13) 4” steel rods, (2) 3” steel rods, (1) 3” starter sub, (38) 4” alum rods (good), (21) 4” alum rods (scars), good working condition Price for extra equipment: $25,000

DERRICK FOR SCHRAMM T660 (ref#15046) full carousel, low and high speed chains, sprockets, heavy duty breakout cylinder, winch line Price: $40,000

SCHRAMM T64 TOPHEAD (Ref#7023Nd) with 2 rebuilt engines Price: $4500

SCHRAMM GROUTER (Ref#5842N) Manufactured 1989, excellent condition, stored inside, only used a few times, trailer mounted, powered by Briggs and Stratton 10 hp engine Price on Request

BOUNDRY WATER GROUT MACHINE (Ref#1510Nb) trailer mounted, 1980’s, powered by twin disc Briggs and Stratton engine, all hydraulic, slide up and down

GEFCO 30K TOP HEAD (Ref#9593) needs rebuilding

JACK UP DRILLING/CORING RIG (Ref#9587) operates in 80’ of water, composed of (6) 10’ x 40’ x 7’H FlexiFloats and (4) 10’ x 20’ x 7’ H Flexifloats, (4) spuds, (4) 80’ legs 3’ dia x 40’ long. Currently on the platform is a Gardner Denver mud rig used for drilling and core samples. Another type of rig such as a Mobile, Acker or CME could be placed on jack up. Currently working. Offered on rental basis: $40,000 per month. Will sell for $1,100,000

CEMENT PNEUMATIC BULKER (Ref#5273N)

Mounted on 1980 Kenworth W900 truck with NTC 350 Cummins engine, 15 sp trans, spring suspension, tubo conveyor blower

Tank built October 2006, 480 cu ft, 2 compartment, aluminum, weight 2600#, 14.9 psi operating pressure

Price for tank: $75,000

Package price: $105,000

MISC DRILL EQUIPMENT (Ref#7670N)

Drawworks

Engine

Top of mast

Swivel, sheaves

Price: $27,000 for the lot - Located West Texas.

Tel: 516-536-7375 Fax: 516-536-7317 rigs@sunmachinery.com