SUN MACHINERY CORP

Telephone:  (516) 536 7375                    Fax:  (516) 536 7317

These rigs are located at various locations through out the USA and  Internationally.

e-mail:   rigs@sunmachinery.com

Challenger, Kremco, Crane Carrier, Taylor, Galexy, Ryker, Dugan,

CHALLENGER SDR-361 800 HP RIG  (Ref#1893N)  Depth capacity 7,500’ with 3-1/2” drill pipe, Challenger 361SDR double drum stacked drawworked, retractable kelly, hoisting 16” x 22.5”, kelly 16” x 22.5”, maximum single line pull 45,000#, Challenger 84’ x 240,000# hydraulically raised mast, 84’ top of rotary table to bottom of crown sheaves, (2) Cat 3406 (400 hp) diesel engine with 5861 Allison transmission, spare Cat 3406. 

New 1000 hp HHT mud pump p/b 12V149T Detroit engine w/ZF hydraulic transmission on 3 axle lowboy trailer.

Dowell 850 hp triplex mud pump 7-3/4” x 8” with a 17’ x 5’ mud tank, p/b (2) Cat D3406B diesel engines

Mud system:  3 tank low profile system with motors, pumps, 600 gpm 12 cone Brandt desilter, 500 gpm 12 cone Harrisburg desander, double life  Lincar shale shaker, safety railings and a new lighting system

Mud agitators

(2) generators 500 kw with Detroit 16V92N Detroit, mounted on a 40’ float

250 kw Perkins 1300 Series generator mounted on trailer

(2) field offices 8’ x 20’, one with AC and heating

10’ x 24’ doghouse with lights and tool box

Complete and rigged up in Texas

Not drilled in 3 years

Price:  $2,500,000

CHALLENGER 3T-360 (Ref#64N)  Manufactured 1981, Challenger Model 3T360-200-95T-SD Triple Axle Trailer Mounted Rotary Drilling Rig, Challenger Model 360 Drawworks, Challenger Model 200-95T Mast, Detroit Diesel Model 12V71N Power Unit, Allison Model CLT 5860 Transmission, Parmac Model 122 Water Brake, Howard-Turner Model 18-2 Rotary Table, Kelco Model 12 Make–up and Breakout Catheads, Mckissick Model 663 Hoisting Block, 100 ton traveling block, Depth capacity: 6000’, Double drum, Hydraulically raised mast 95’ x 198,200# with 6 lines 1” cable, (2) 900/350 air compressor,  Dog house, Mud tank, (1set) Baash Ross Type “C” Safety Clamp with box and handles for up to 10-5/8” casing, (1set) Type T-100 Web Wilson center latch elevator for 4-1/2” drill pipe, (1set of 2) 1-3/4” O.D. X 60” long 150 ton capacity elevator links

(1) Gardner Denver 7-1/4” X 10” Model F0-FX0 Slush Pump, with 6V92 Detroit Diesel power unit unitized on oilfield skid with hoses, gauges and accessories, 486 gpm at 367 psi, 85hp (70 rpm)

Type T-100 CL Elevators for 4-1/2” drill pipe, Type C-1 Drill Collar Slips for 6-3/4” to 8-1/4” O.D. Collars.

(1) Harrisburg (or equal) 4000/8000 PSI vibrator hose, 3” ID with 4” Molded Male Connections x 12’ length Demco (or equal) series DM 3” Gate Valve 2000 PSI Bit Sub 6-5/8” Reg. Box X 6-5/8” Reg. Box X 4 ½          6 5/8” Reg. Box 7-5/8” Reg. Box Down, Bottleneck  9” Outside 4.            Cross-Over Sub 4-1/2” Box Up X 6-5/8” Pin Down.

(1) Generator: Lister, capacity: 5,000 watts                                  

(1) Square Kelly: 4 ½” x 36 ft long. 1 Substructure to put on the rig.

Complete rig

Price: $1,600,000

Location: USA

CHALLENGER 360-200  (Ref#12056N)

Draw Works - Challenger Model 360, Double Stacked Drums, Hoisting Drum - 10-1/2” X 22-1/2”, Kelly Drum - 10-1/2” X 22-1/2”.  Clutches – Wichita 24”, 3Plate.  Single Line Pull 36,000#, LeBus Grooving with 7/8” line (1” swaged line), PARMAC Hydromatic Twin Disc Water Brake, Hydraulic Wireline Drum, 8 foot Elevated Drill Floor with Howard Turner 18” Rotary Table, 200,000# Floor Capacity with 7.5 Foot Minimum under, Floor Clearance for BOP Use

Derrick - Challenger Model 200:  Top of Crown Height – 96 feet from Ground Level, Satellite Style Fluorescent Derrick Lighting, MD/TOTCO Weight Indicators, Rated Hook Load Capacity – 200,000# on 8 Lines, Working Line - McKissick 100 Ton, 4-Sheave Traveling Block, Drilling Line – McKissick 100 Ton, 4-Sheave Traveling Block & Hook Combination, Custom Hydraulic Lift, Roller and Guide System for Derrick Transport

Engine –Caterpillar C15, 540 HP Diesel Engine:  Enclosed Engine Compartment with Silencer Muffler, 200 Gallon Fuel Storage on Rig Deck, Allison Transmission with Torque Converter

Mounting:  Triple Axle Trailer with 3-20,000# Axles with Removable Rear 4th Booster Axle

Standard Support Equipment:

Hex Kelly & High Pressure Swivel

800 Gallon Diesel Fuel Storage

Electric Fueling Pump

Geolograph Double Pen Recorder

(Drilling Rate and Weight on Bit)

3o or 6o Deviation Survey Tool

Halliburton Survey Tool Wire Line

Hydraulically Raised Elevated Self Contained Dog House

80 kW Quiet Site CAT Generator

250 Amp DC Welder

Bear Automatic Driller

Explosion Proof Electrical Connections

15 HP Mission 2 X 3 Mixing Pump

Caterpillar 4 X 4 Backhoe with Forks

Site Dedicated Winch Truck

Rig Smart Data System

Doghouse system, cantilevered with Caterpillar generator

Gardner Denver 212P duplex mud ump

Pony sub base to raise the rig 9’ level

Price:  $980,000

CHALLENGER 360  (Ref#8991N)  7,500’ depth capacity

Drawworks:  1981 Challenger Model 360 Double Drum Drilling Unit, Trailer Mounted w/ Mod.224 Double Drum Drawworks, Lebus Grooved for 7/8” line,  Air operated controls, Parmac 122 22” Hydromatic Brake, Crown-O-Matic

Mast:  Free Standing Challenger Model 200-84,  84’H 4-Leg Mast 200,000# API Hook Load, Hydraulically Raised, (5) 36" Sheave Crown Block, Crown Safety Platform, Ladder,  Atlas Deadline Anchor, Guide Tracks w/ Hydraulic Shift Capability Allowing M

Carrier:  All Above Mounted on Challenger Tri-Axle Trailer, w/ Detroit 12V71T Diesel Engine, 445 HP, Air Start, w/ Allison CLBT-5860 Transmission (1) 12,000 Lb. Rowson-Koenig Hydraulic Winch, M/N S0066,  (1) Quincy A

Substructure:  Challenger Back on ramp type substructure, 10' Floor Heigth w/ 8' from Rotary Beams to Ground Level, 100,000 Lbs. Set-Back, w/ Rotary Beams, V-Door Ramp, Stairs, Safety Rails, Dead-line Anchor, (2) 12,000Lbs. BOP Lifting Hoists w/ Trolly Beams, (2) 20,000

Rotary Table:  18” Howard Turner w/ Split Master Bushings

Blocks/Hook:  Garner Denver 200 Ton Block w/ Web Wilson "Hydra Hook" 150 Ton

Elevator Bails  1 3/4"Dia. x 96"L 150T

Accumulator:  Guangzhou Dongsu Machinery 5-Station 12-11 Gal. Bottle, M/N 0480-5,   Mounted on Water Tank Skid, w/ 6-Station Remote Control Panel Mounted on Doghouse Skid

(22) 1" Stainless Steel Armored Covered Hoses

BOPs:   11” 3K Annular Cameron 11" x 5K Double Ram Preventer w/ (4) 4 1/16" x 5K Flanged Side Outlets

9" 5K x 11" 3K x 24"T Drilling Spool w/ (2) 2 1/16" 5K Flanged Outlets

3 1/8" x 5K Choke Manifold, 30"Dia x 12'T Degasser mounted on 8'W x 20'L Skid

(1) 3 1/2" x 30'L x 5K Stainless Steel Armored Covered Hose

Mud Pump #1  Gardver Denver P Z-7 Triplex Pump 550 hp.

Mud Pump #2  Gardver Denver PZ-7 Triplex Pump 550 hp.

Mud System: 

(1) 300 Bbl. Mud Tank w/ Internal Plumbing and Circulating System

(3) FSI MA10HP Model 10HP Low Profile Mud Adgitators

(1) FSI Series 500 B4X-12 Linear Motion Shale Shaker

(1) FSI Series DSR2H Desander w/ (2) 10" High Volume Desander Cones

(1) FSI Series SSR 8 HIL Desilter w/ (8) 4" Cones

(1) Double Life 5" x 6" x 11" Centrifugal Mud Cleaner Pump M/N 250, p/b Baldor 50 HP Electric Motor

(1) Double Life 5" x 6" x 11" Centrifugal Mixer Pump M/N 250, p/b Baldor 50 HP Electric Motor

(1) Double Life 5" x 6" x 11" Centrifugal Mixer Pump M/N 250, p/b Baldor 50 HP Electric Motor

Generator / Utility House: 

# 1 Generator - Caterpillar 260 Kw AC Generator M/N SR4, p/b Cat 3408 Diesel Engine

# 2 Generator - Caterpillar 285 Kw AC Generator M/N SR4, p/b Cat 3408 Diesel Engine

#1 Air Compressor - Quincy M/N QR390, p/b 20 HP Baldor Electric Motor

#2 Air Compressor - Quincy M/N QR390, p/b 20 HP Baldor Electric Motor

(2) Elite Series ECP80 Refrigerated Air Dryers

Square D Control Panels

Square D 75 KVA Transformer

All Above Mounted in 12'W x 41'L Skidded House

Doghouse:  7' 7"W x 22' L x 9' 8" H -Round Top Lays Over Into Water Tank-Heater-Lights-Knowledge Box-Bench w/ Storage

Change / Parts House:  10'W x 40'L Skid w/ 20'L Parts House w/ shelving, w/ 17'L Change House w/ (20) Lockers, Bench, Lights, Heater

Water Tank: 

(1) Shop Built 10'W x 8'H x 30'L 425 Bbl. Water Tank w/ 20' Covered Porch

(1) Double Life 3" x 4" x 13" Centrifugal Water Pump, p/b 30 HP Electric Motor

(1) Double Life 3" x 4" x 13" Centrifugal Water Pump , p/b 30 HP Electric Motor

Fuel Tank:  12,000 Gal. Fuel Tank w/ 8'W x 12'L Pump House, w/ O'Drill Fuel Filter & (2) Roper 2AM12 Fuel Pumps, 4 Compartment Lubister

Instrumentation: 

Martin Decker Clipper Weight Indicator

Satalite Automatic Driller

3-Pin Drilling Recorder

Handling Tools:  Woolley Type C Rotary Tongs w/ "Shorty" Arms.

Ancillary Equipment: 

18"H Catwalk

(4 set) 18"H x 30'L Pipe Racks

(1) 3 1/2" x 56'L Rotary Hose

Price:  $1,750,000

CHALLENGER 360-200  (ref#13516N) 

Double drum stacked drawworks:  Hoisting drum 101-/2” x 22-1/2”, kelly drum 10-1/2” x 22-1/2”, Wichita 24” clutches

Single line pull 36,000#, Lebus grooving with 7/8” line (1” swaged line), PARMAC Hydromatic twin disc water brake, hydraulic wireline drum, 8’ elevated drill floor, Howard Turner 18” rotary table, 200,000# floor capacity with 7-1/2” minimum under floor clearance for BOP.

96’ x 200,000# Challenger Model 200 derrick.  100 ton McKissick working line, 4-sheave traveling block, 100 ton McKissick 4-sheave traveling block and hook.

Cat C15 540 hp diesel engine, 200 gallon fuel storage on rig deck, Allison transmission with torque converter

Mounted on triple axle trailer with (3) 20,000# axles with removable rear, 4^th booster axle

Hex kelly and high pressure swivel, electric fueling pump, Geolograph double pen recorder, Halliburton style survey tool wireline, hydraulically raised and elevated self contained dog house with 800 gallon diesel fuel storage, 80 kw Cat generator, 250 amp DC welder, Bear automatic driller

4500’ 16.60# 4-1/2 XH drill pipe, 500’ 6” (Nominal) drill collars

Gardner Denver PZ7 triplex mud pump with Cat engine

OPI 700 triplex mud pump with Cat engine

Price:  $3,200,000

CHALLENGER 320 (Ref#15420D)

Manufactured 1980, 64’ x 150,000# mast, 17 ½” Oilwell rotary table, Howard Turner 100-Ton swivel, Varco Rotary Drive Bushing, (2) McKissick 75-Ton Blocks, mounted on 5 axle Crane Carrier w/Detroit Series 60 diesel engine, Allison 5860 Transmission, 4 hydraulic leveling jacks, (1) 6” substructure, (1) 11’ substructure w/v-door, catwalk, (1) 185-bbl steel mud tank w/shaker, (1) steel mud tank, Cummins NT855 200KW generator

Price: $ 725,000

Drill Pipe - 3600’ of 4” OD drill pipe w/ 3 ½” x H connections    Price: $ 60,000

Drill Collars - (11) 5 ½” OD x 30’L drill collars w/4” H-90 connections   Price: $ 20,000

Misc Tools & Equipment:

Rausch 3 ½” x 7” Spinning Tongs

(2) Byron Jackson C Rotary Tongs

(2) Drill pipe slips

Varco 5 ½” x 7” drill collar slips

Wooley 5 ½” casing slips

Baash-Ross 8 5/8” casing slips

Byron Jackson D.P. Elevators

(1) set of pipe racks

Geolograph 2-pen recorder

(2) pipe tubs

(10) 4” drill collar lift subs

Misc. Hand Tools

Misc. X-over Subs

Price for misc tools and equipment: $ 50,000

Regan Annular BOP, 10” x 3000 psi, Hydril 17k80 closing unit w/(2) 80-gallon units  Price: $ 20,000

CHALLENGER 320  (Ref#8987N)  Depth capacity 6000’

Drawworks  1981 Challenger Mod. 320 double drum drilling unit, Trailer mounted with mod. 224 double drum drawworks, Lebus grooved 7/8” line, Air operated controls, 12” hydromatic brake

Mast  Challenger, 64’ H, 4-leg mast, 150,000 lb. Static hook load, Hydraulically raised, (6) Sheave crown block, Crown safety platform, Ladder, Guylines

Carrier  All above mounted on Dickerson Tri-Axle trailer with Detroit 8V-92N diesel engine with electric start, Radiator, Gauges, Allison CLT-750 transmission, (2) Koenig 2,500 lb. hoists, Halliburton wireline unit, (1) Hydraulic reservoir, (2) 500-gallon fuel tanks, (4) Hydraulic leveling jacks, Golding walkways with stairs, Safety rails, 18R22.5 front tires & 11R20 rear tires

Substructure  Shop built 8’ 6” W x 10’ L Drive-on ramp type substructure with 100,000 lb. setback, 150,000 lb. casing capacity, Rotary beams, V-door ramp, Stairs, Safety rails, Deadline anchor

Mud Pump #1  National 7-P-50, 550 HP triplex independently powered by Cat D-379 diesel engine

Mud Pump #2  Wilson 600 duplex mud pump independently powered by Detroit HV-71 diesel engine

Power Sub  Venture Tech PS-6K

Rotating Equipment  Howard Turner 18” rotary table with split master bushings, Howard Turner 75 ton swivel, 4-1/4” dia x 40’ L square Kelly

Traveling Equipment  (2) McKissick 75 ton blocks with (3) sheaves f/ 7/8” line, 3” x 108” L elevator bails

Well-Control Equipment  Regan 10” x 3,000 psi. annular blowout preventer, Cameron 4-station closing unit with Triplex pump, Gauges, (4) 20-gallon accumulator bottles, Electric/Air pump, skidded

Houses

8’ W x 32’ L Tandem axle toolpusher’s trailer, fully furnished

Shop built 8’ W x 18’ L Driller’s doghouse with round top, (5) lockers, Bench storage, Lights, Heater, 200 Bbl. Water tank, 8,000 Gallon fuel tank, mounted on 8’ W x 40’ L Tandem axle trailer, 10.00 x 22 tires

Shop built 7’6” w x 21’ L Change house with (13) lockers, Bench, Fluorescent lights, Heater, 7’6” W x 9’L parts room with shelving, 7’6” w x 6’2” L Fuel tank, mounted on 7’6” W x 36” L Tandem axle trailer, 10.00 x 22 tires, 10-hole budd wheels. 

Shop built 8’ W x 10’ L parts house skidded

Generator / Utility House

No.1 – Olympian 100 KW. AC generator powered by Perkins 1066-6TG diesel engine with electric start, Radiator, Gauges, Mounted dog house trailer

No. 2 – Olympian 100 KW. AC Generator powered by Perkins 1066-6TG diesel engine with electric start, Radiator, Gauges, Mounted dog house trailer

Shop built 2’ W x 4’ H x 9’ L, 4-compartment Lubester, Mounted utility house

1-Stage air compressor powered by 5HP electric motor, Mounted on 50 Gallon air receiver tank

All above mounted 8’ W x 30’ L Utility house, Skidded

Mud System  (2) 250 Bbl. Bulk Tanks, (2) Mission magnum 2” x 3” centrifugal pump, electric motors

Instrumentation  Martin Decker “The clipper” 340,000 lb weight indicator, Martin Decker “Hydro-Weight Special” 320,000 lb weight indicator with pump pressure gauge

Drill Pipe  TBD

Drill Collars  TBD

Handling Tools  Woolley Type C rotary tongs, Web Wilson 3-1/2” drill pipe elevators, Set of 2-7/8” drill pipe elevators, Varco drill pipe slips, BASSH-ROSS DC safety clamp

Ancillary Equipment  (2) shop built 7’9” W x 32” H x 37’ L pipe tubs, (1) with center walk-skidded, (1) set of (2) 3’ H x 20’ L Triangle pipe racks, 3” x 40’ L rotary hose, (1) 3” Dia. X 16’ L Vibrator hoses, (2) 8” x 12’ L Suction hoses

Miscellaneous spare parts, hand tools, valves, fire extinguishers, etc.

Price:  $1,150,000

CHALLENGER 320  (Ref#8989N)  6000’ depth capacity

Drawworks:  Challenger Model 320 Double Drum, Both drums grooved for 7/8” line,  Air operated controls, Parmac 121 12” Hydromatic Brake

Mast:  Free Standing Challenger Model 150-64, 64’H 4-Leg Mast 150,000# API Hook Load, Hydraulically Raised, 6 Sheave Crown Block, Crown Safety Platform, Ladder

Carrier:  All Above Mounted on Challenger Tandem Axle Front & Tri-axle Rear Single Man Cab Carrier, w/ Detroit 60 Series Diesel Engine,  w/ Allison CLBT-5860 Transmission  (2) – 4,000 Lb. Hydraulic Winches, (1) Quincy Air Compressor, Model 325, (1) Halliburton F-300 Hyd. Wireline Unit, (4) Leveling Jacks, (2)– 500 gal. Fuel Tanks, Folding walkways, Stairs, Safety Rails, 18R22.5 Front & 11.00R20 Rear Tires

Substructure:  T-Type 10’H x 8’W x 12’L  Back on ramp type substructure with 8’3” clear height under rotary beams, 100,000 Lb. Setback, 150,000 Lb. Casing Load, w/ Rotary Beams, V-Door Ramp, Stairs, Safety Rails, Dead-line Anchor, 12’W x 40’L Mud Boat

Rotary Table:  18” Howard Turner w/ Split Master Bushings

Blocks:  2 Each 75 ton McKissick, w/ (3) 28” Sheaves, 7/8” Line

Swivel:  Howard Turner 50 Ton

Elevator Bails   2 Each 3” D X 60” L

Power Sub:  Venture Tech, Model # PS-7K-3000, 7,000 Lb. Torque @ 20 RPM

Accumulator:  S&S Gas Powered 2 station closing unit M/N GE-03030-30, 45 Gal.

BOPs:  Hydril 7” 3000 PSI Annular

Rotating Head:  Washington 3000# 11” Flange

Mud Pump #1  Gardner  Denver PAH Triplex Pump,  Hydril K-20-3000 Pulsation Dampener, O'Drill 2” x 5,000 psi Shear Relief Valve  O'Drill 6,000 PSI Pressure Gauge, V-Belt Drive Assembly, Master skidded w/ Detroit  60 Series Diesel Engine,Allison HT-750 Transimission MCM 5" x 6" x 12" Centrifugal Pump

Mud Pump #2  Gardner  Denver PAH Triplex Pump, Hydril K-20-3000 Pulsation Dampener, O'Drill 2” x 5,000 psi Shear Relief Valve, Cameron 6,000 PSI Pressure Gauge, V-Belt Drive Assembly, Master skidded w/ Detroit  60 Series Diesel Engine, Allison HT-750 Transmission  MCM 4" x 5" x 12" Centrifugal Pump

Mud System:  (1)10'W x 6'H x 37'6"L, 386 Bbl. w/ 8'L Porch Extension, (3) Compartments, Flat Bottom, Internal Plumbing, Top Mounted Walkways, Stairs, Safety Railing, (2) - Mission 5" x 6" x 11" Centrifugal Mixing Pumps both powered by US Electric 30 HP Electric Motors, w/ (2) Brandt Mud Agitators p/b Allis Chalmer 10 HP Electric Motors, w/ (1) National DLMS-235 Single Screen Shale Shaker, w/ 48" x 8'H Atmospheric Degasser.

Generator / Utility House:

Generator # 1 - General Electric 300 Kw AC Generator, p/b Cat 3408 DIT Diesel Engine

Generator # 2 - Caterpillar 250 Kw AC Generator, p/b Cat 3408 Diesel Engine

112.5 KVA Transformer

Cutis 2-Stage Air Compressor p/b 20 HP WEG Electric Motor

All Above Mounted in 8'W x 40'L Skidded House

Water Tank:  (2) Shop Built 126 Bbl. Water Tanks w/ Mission Mag 3 x 4 pump p/b 10 HP Electric Motor

Doghouse / Fuel Tank: 

7'W x 15'6"L Dog House w/ (4) Lockers, Knowledge Box, Bench Storage, Lights, Heater, Microwave

10'W x 8'H x 7'6"L  4,325 Gal. Fuel Tank

All Above Mounted on 8'W x 40' 6"L Tandem Axle Trailer w/ 10.00x20 Tires

Instrumentation: 

Martin Decker "Clipper" 100,000 Lb. Weight Indicator, w/ Pump Pressure Gauge and Tong Line Pull Gauge

Martin Decker "Clipper" 140,000 Lb. Weight Indicator

Martin Decker "Clipper" 100,000 Lb. Weight Indicator

Handling Tools:

Woolley Type C Rotary Tongs w/ "Shorty" Arms.

Ancillary Equipment: 

(1) Pipe Tub w/ Catwalk

(2 set) 3'H x 30'L Pipe Racks

(1) - 3" x 54'L Rotary Hose

(1) Pressure Washer

(1) 10'W x 40'L Parts House w/ (6) Lockers, Lights, Cabinets, Parts Bins, Skidded

Price:  $1,350,000

CHALLENGER 320  (Ref#1434N)  Manufactured 1980, Double drum drilling unit, trailer mounted, Model 224 double drum drawworks, Lebus grooved 7/8” line, air operated controls, 12” hydromatic brake, 64’ x 150,000# Challegner 4-leg mast, hydraulically raised, (6) sheave crown block, corwn safety platform, ladder, guy lines.  Mounted on Dickerson tri-axle trailer with Detroit 8V92N diesel engine with electric start, radiator, gauges, Allison CLT750 transmission, (2) 500 gallon fuel tanks, (4) hydraulic leveling jacks, walkways with stairs, safety rails, R22.5 front tires and 11R20 rear tires.  Shop built substructure 8’6”W x 10’L drive on ramp type substructure with 100,000# setback, 160,000# casing capacity, rotary beams, V-door ramp, stairs, safety rails, deadline anchor, Venture Tech PS6k power sub  Price:  $510,000

CHALLENGER 320HT-100  (Ref#13597)  12” - 60” diameter, 600-900 hp, 92’ mast, Jumbo Buster rotary table, 8V92T Detroit diesel engine, Allison CLT 5860 ST transmission, Gardner Denver 6 x 2” mud pump w/Cat 3306 engine, (2) air compressors capacity 900 psi, generator, doghouse, (2) pipe baskets, (2) mud tanks, mounted on 3 axle Autocar with diesel engine, 2 winches and gin pole, 2000’ of 4-1/2” drill pipe, collars, handling tools, trailer, walkways, steps and substructure rails, Currently working in South America, rig reworked and in good condition  Price:  $1,600,000

Delivery cost to Houston:  $120,000

CHALLENGER 320  (Ref#12917N)  64’ x 150,000# mast, 60 Series Detroit engine, 5 axle carrier, 10’ T type sub, (2) Gardner Denver PAH pumps  Price:  $1,800,000

CHALLENGER 230 (Ref#14887N)  Manufactured 1985, Double drum drawworks, (2) Model 218 drum clutch with air controls drum brakes 8” x 28”, (2) 6V92N 225HP each diesel engines and Allison 750 (5 speed) transmission, Mast Model 100-59, 59’ x 100,000# capacity, 50 ton crown block, Hydraulically raised, Gardner Denver 7-1/2” x 10’ duplex mud pump on deck, 18” rotary table, 75 ton swivel, 3-1/2” water course, Tri axle trailer mounted w/ (4) hydraulic leveling jacks, Dimensions: 68’ Long x 14’ High x 8’ Wide

Operating Equipment

50 ton hoisting block with duplex hook  and 50 to  Kelly block 6 lines, Kelly 4 1/4" x35" sq. with top saver sub attached swivel  with 4 IF ( RH) pin down connection, Walkways, Stairways, Racking board, Service winch, Derrick lights, 4000 # hydraulic hoist, Kelly drive bushing, Racking sub structure, Tool boxes, Kelly hose, Standpipe, Weight indicators

Optional Equipment

Power tongs, Handling equipment, Drill pipe, Tongs- manual type "C", Mud pump, Air package , Pull down, Injection pump, Catheads, Diesel /electric generator

Price: $550,000

Located Middle East.

CHALLENGER 230 (Ref#7587Ne)   Manufactured 1986, mounted ib 3-axle trailer, twin GM 6 cyl. diesels, deck mounted, 7-1/2” x 10” GD mud pump.60 joints of 5”x30’ of drill pipe, (2) joints pf 6”x30’ of drill collar, pair of tongs, drill pipe elevator, (2) drill collar elevator subs, (1) taper taps, (1) over shot

Price: $470,000

KREMCO K750T  (Ref#1350Na)    Price:  $5,000,000

KREMCO 650T WORKOVER RIG  (Ref#12898Nc)  Manufactured 1982, 1-1/8” drill line, 22 single hydromatic brake, powered by Detroit 60 Series diesel engine (500 hp), Allison 5860 5-speed transmission, 112’ x 300,000# Skytop telescopiec double mast, 150 ton McKissick 8 line block,

Oilwell 658 5 x 8 mud pump powered by Detroit Series 60 (450 hp) diesel engine10 speed manual transmission

400 bbl tank on skid with 3 compartment and dual suction skimmer and steam coil, man lift, full stairs to ground

7-1/16” x 5000 psi BOP Model SC double gate, work spool double flanged

Equipment skid:  5000 psi testing pump, 1100 gal fuel tank, 660 gal glycol tank

Combination building: 50’ skid type, Isuzu 97kva 3 phase genset, 45 gal accumulator, electric toilet, change chack with 10 lockers and desk

3-1/2” handling equipment

Foster power tongs rated at 6000’ with jaws and backup to fit 2-3/8” and 4-3/4” tubing

Packoff head hydraulic Regan

Rig mats:  (2) 8’ x 45’ with built in ramps, (1) 8’ x 16’ stabbing mat

Catwalk heavy duty

Price:  $1,275,000

KREMCO 600 WORKOVER RIG  (Ref#716N)  Manufactured 1991, double drum, double disc brakes, trailer mounted, 24" frame, 12' wide, 16 tires: (8) on inside of frame, (8) on outside of frame, 4 hydraulic leveling jacks, 42 x 10" main drive w/875' of 7/8" line, 28 x 8" sandline, 13,000' of 9/16" line, 104' x 275,000# hydraulically raised mast, 8V92T Detroit diesel on deck, 740 Allison transmission, 1 travelling block, 3 sheaves 100 ton 6 line  Price:  $480,000

KREMCO L-600 (Ref#12885N)

Manufactured 1981, Depth capacity 7500-8000’, Self-propelled carrier -Penti-axle Drive

DetroitSeries 71 12V Engine with Allison model CLBT-5860 Transmission

Single Drum Drawworks with Hydromatic Brake

Hydraulic Make-up, Break-out System w/ Mast Lights

Kelly w/ 4 ¼”sq Drive Bushing,

Drilling Fluids: Water, Mud, Air, Mist ,

Mast:

103’GL to Crown, 230,000 lbs Hook-Load Capacity on 8 Line Traveling Block, Hydraulic Service Winch, Runs Range III casing

BOP’s:

(1) GK 11”, 3000 Psi Annular BOP

(1) 11”, 3000 Psi Double Ram BOP5 1/8”, 5K psi Van Oil (onboard rack)

(1)Koomey four (4) Station Closing Unit mounted on 30’Skid

Price for above:  $2,000,000

AVAILABLE AT EXTRA COST:

(2) I.R. & Keystone Air compressors skid mounted - 1170/350 each

(1) Air Booster skid mounted Ariel 900 psi single stage

17 1/2”Rotary Table with Master Bushing

9’Substructure (fixed) with Folding Walks (7’Clearance beneath Rotary Table)

Oilwell model P-214 duplex mud pump

Miscellaneous

•(1) Center Tube, (4) Plain Tubes                                                    •(1) Washington Air Rotating Head

•½”15.50 IF Grade E Drill Pipe (200 jts) –7,000+ feet                  •Misc extensive tools, hose, pipe, bits, etc.

•Enhancements/upgrades:

•(2) Air compressors/skid mounted 1170/350 each                    

•1 Air Booster (Ariel JGQ-2) skid mounted 900 psi single stage

•New compressor                                                                                •Engine upgrades

•New engine booster                                                                          •Air Booster overhaul

•New catwalks on Rig                                                                         •Engine upgrades

•Mud Pump Mud pump upgrade                                                      •New Transmission

•Injectors upgrade                                                                               •New Drill Line

•Kremco Model 600L has current Level 4 derrick inspection certification

Stacked USA.

Price: $2,550,000

CRANE CARRIER CORSAIR WORKOVER RIG  (Ref#7904N)  Manufactured 1982, double drum, 22 hydromatic brake, 96’ x 250,000# mast (inspected 4/2008), mounted on 4 axle Carrier, 100 ton blocks, 5893R Foster tongs with air backup and lifting cylinder, 100 ton Baash Ross Ross blocks, BJ rod rongs with ¾”, 7/8” and 1” heads, 72” bails, 100 ton 2-3/8” and 2-7/8” elevators, 100 ton Cavin air slips, rod table, wiper box, guy wires, derrick climber, doghouse, 240,000# Totco indicator, aluminum mats, oil saver and pump  Price:  $750,000

CRANE CARRIER CORSAIR 500 WORKOVER RIG  (Ref#585Na)  Manufactured 1982 – Rebuilt July 2008, double drum, 22” hydromatic, 96’ x 250,000# hydraulically raised mast (inspected 4/2008), mounted on 4 axle carrier with Detroit Series 60 diesel engine, 750 Allison automatic transmission, tooled as follows:  100 ton blocks, rebuilt 5893R Foster tongs with air backup and lifting cylinder, 100 ton Baash Ross blocks, BJ rod tongs with ¾”, 7/8” and 1” heads, 72” bails, 100 ton 2-3/8” and 2-7/8” elevators, 100 ton Cavin air slips, rod table, wiper box, guy wires, derrick climber, doghouse, 240,000# Totco indicator, aluminum mats, oil saver and pump, currently working  Price:  $675,000

CRANE CARRIER 400  (Ref#11164Na)  Manufactured 1980, double drum, 1” line, 96’ x 215,000# hydraulically raised mast, mounted on 5 axle carrier with hydraulic leveling jacks, tongs, tubing board, currently operating  Price:  $385,000

CAMERON 550 WORKOVER RIG PACKAGE  (Ref#10952N)

Manufactured 2006

Cameron 550 rig, 15,000’ of new 9/16” sandline, mounted on 1981 Pettibone carrier (rebuilt 2006), 110’ x 250,000# 1981 Cooper derrick, hydraulically raised, certified with Gamma Ray, Series 60 Detroit 12.7 diesel engine, 475 hp (4,624 hours), 6061 Allison trasnmission, 110 ton 3-sheave Sowa block, 125 ton 72’ electric links, 2-3/8” and 2-7/8” tubing elevators, Foster 5893R tubing tongs with lifting cylinders and air back ups, 100 ton air slips with 2-3/8” and 2-7/8” dies, Totco weight indicator

2005 Tandem axle  Abu flatbed trailer with body

2007 Dodge 4 x 4 dually quad cab, 95,000 miles on diesel engine

2002 Ford F-550 flatbed 4 x 4 drilling crew cab truck with hitch for tandem axle trailer with tools

2006 Tarno tandem axle trailer with a mounted dgohoust, fifth wheel, lockers, heater, 100 bbl water tank

Package Price:  $700,000

CAMERON C500 WORKOVER RIG  (Ref#856N)  New, never used, manufactured 2008, mounted on 5 axle Crane Carrier powered by Cummins ISX 525 hp engine, Allison 5610 auto transmission, 110’ x 330,000# API derrick tubing, racking boards, lighting, hydraulic raised/scoped, double drum drawworks (42’ x 12’ and 38’ x 8’) double disc assist brakes, (2) 8000 lb aux hydraulic winches, 8 line block and hook 1-1/8 cable 100 hp, Cushman drop box and right angle accessory drive box, 4 hydraulic leveling jacks, 8’ x 8’ ajustable rear working floor  Price:  $780,000

CAMERON SERIES 400  (Ref#3491N)  Detroit Diesel Series 60 power, Cameron 104’ x 240,000# SHL telescoping mast, King Model 15PS dual drive top drive w/hydraulic back brake, shopbuilt 13’7”H x 15’9”W x 30’3”L box type split scoping substructure, McKissick Model 83 100-ton 4 sheave block, Ideco 175F 17-1/2” x 44” rotary table, Ideco 550 duplex mud pump p/b Cat 353 engine, Wilson 600 duplex mud pump p/b Detroit diesel Series 60, Marathan 200kw generator p/b Cat 3306, Townsend 9” 3000# BOP and Regan 9” 3000# annular, 6000’ of 4-1/2” 16.60 drill pipe, (12) 6-1/4” drill collars, (2) 8” drill collars, mud systems (2) 5’H x 8’6”W x 40’L 500 barrel mud tanks, Brandt ST 4’ x 5’ single screen shale shaker, Harrisburgh desander w/12” cone, 7’6”W x 30’L top doghouse (insulated), 8’ dia x 35’L 310 bbl water tank, rig pulldown available upon request  Price:  $2,100,000

TAYLOR C500 SERVICE RIG “LIKE NEW” (Ref#356Na)  Manufactured 2006, Derrick, Pemco 104/240 8 lines, Draw works, model DD260, Sand line drum, line size 9/16 brake size 60 inch, Max single line pull 41500, Engine, Caterpillar C-15, Transmission, Allison model 5610, 2 Steering axles, Eaton model 20F4
Tandem rear end, Eaton ratio 6:17 tag axle, Winch, Tulsa 707 W model 81485, 4 Hydraulic leveling jacks

Completely tooled

Working

Tools and Miscellaneous

•          Tubing tongs with 2 3/8 and 2 7/8 tubing dies

•          2  3/8 tubing elevators       2 7/8 tubing elevators

•          Air slips with 2 3/8 and 2 7/8 segments

•          Bells, 1 set

•          Rod hook

•          2 – rod elevators       2 – rod wrenches

•          Crew bumper pull dog house

•          Complete swabbing mandrel with hand pump

Price: $895,000

FREE STANDING MOUNTAIN 250 DOUBLE DRUM BACK IN RIG  (Ref#1422Nb)  Manufactured 2000,  powered by a 60 Series DDEC engine rated @ 375 hp, Allison 750 5 speed torque drive transmission, main drum brakes 38 in x 10 in, sandline drum brakes 38in x 8in, Mast 21m (68’) x 53,400 daN (120,000#) with 4 lines, crown saver, Sowa 75 ton travelling blocks, racking capacity 8202 ft, 2.87 in tubs, in single strands, 0.87 in drill line, 0.56 in Polycore sandline  Price:  $530,000

RYKAR WORKOVER RIG  (Ref#1301N)  2006 Rykar drawworks main drum 42” x 10” c/w Kolbelt 40” disk assist brake c/o 2-deck winches, 3600 meters 3 x 19/1/2” swaged sandline, 105’ x 225,000# Rykar derrick with 6 lines, (2) 8’ x 45’ matting sheets / (1) 8’ x 16’ beam matting / (1) 6’ x 12’ tubing matting c/o pipe tubes,  Detroit diesel 60 series 475 hp power, Allison CLT 5860 transmission, 7-1/16 5000# double gate BOP, 7-1/16 5000# Shaffer SPH, all BOP equipment is NACE certified.  Rykar 66 gal class III accumulator system, Oil Country power tongs, handling equipment, Oilwell 644 (4 x 6”) pumping unit with Detroit diesel 60 Series c/o Allison HT750 transmission, Rykar 36 m3 mud tank c/w gas box, drilling trough, mixing system, doghouse    Price:  $2,500,000

DUGAN DS5 6000’ RIG  (Ref#11188)  Dugan drawworks DS5, 1-1/8” line w/Hydramatic Parmac brake, Twin disc torque converter, powered by 500 hp Cat 3408 diesel engine, trailer mounted, Lee C. Moore 96’ x 200,000# mast, Lee C. Moore 10’ x 300,000# substructure, Emsco D375 duplex mud pump w/Cat D353 diesel engine, OPI 700 hp pump w/ Cat D379 diesel engine, 17-1/2” National C175 rotary table, Ideco 150 ton swivel, Gardner Denver 100 ton blook/hook, 4-1/4 x 39’ kelly w/Varco KVRS drive bushings, 9” Shaffer 3000 LWP BOP, 9” Regan 3000 annular BOP, 3000# complete manifold w/gauges and choke, 40 gallon w/electric pumps.  8’ x 20’ top doghouse insulated and heated, trailer mounted.  400 bbl water tank and parts house, 300 bbl mud tank complete w/hopper and mud guns, Swaco linear motion shaker, 4200 gallon fuel tank, 6000’ of 4-1/2” XH drill pipe, (18) 5-3/4” drill collar – 4” H-90 threads, (2) 8” drill collars.  Handling tools:  BJ 36” tongs type B, Wooley 150 ton elevators, Wooley slips, Bear automatic driller, 120 hp York Shipley boiler, 7” A-1 Sure Shot Survey instrument, Martin Decker weight indicator, canvas winterization, currently drilling  Off Market

DUGAN DRILL RIG (Ref#1094N)  Single drum, hydrostatic brake, catheads, 1 1/4" drill line, air clutches, 90' x 190,000 hydraulically raised & scoped mast, mounted on 3 axle tandem carrier w/Detroit 12V71 diesel on deck, 4 hydraulic leveling jacks, 220,000# block/hook, Bowen PS4 power swivel, 250 ton, 11,000# torque, run on beam in mast, powered by Cat 3408 diesel, complete with hydraulics & hoses, Weight of rig 155,000#, has drilled a 2000' well, 36" diameter surface & set 300' of 30" casing, 15" diameter & set 1700' of 8" casing.  1700’ of 7” bottlneck drill pipe 6-5/8 Conn 20’ and 30’ joints.   Good clean condition, surplus to needs of major drilling contractor

Located Southeast USA

PRICE:   $700,000  PRICE REDUCED:  $600,000

UNIVERSAL WELL SERVICE RIG (REF#5135N) Mounted on 1989 Peterbilt 3 axle carrier, powered by Cummins L10 w /750 Allison Auto transmission, 32 Universal Drawworks, 57’ x 120,000# mast , single rod, single tubing, 50 tubing blocks, small 2 valve accumulator on rig, slips, elevator, DBL gate BOP & Annular links, rod & swabbing equipment & flow tee, Oilwell 344 - 3 ¾” x 4” with pressure relief valve and gauge with approximately 300 ft of 2” iron & 10 chicksans, 80 BBL tank with poor-boy degasser, mixing hopper & trough                     PRICE:  $329,000