SUN MACHINERY CORP.
Call: 516-536-7375 / 516-536-7317 fax
SKYE, G & L, BADGER, JOY, POARCH BROTHERS, WESTERN GEOPHYSICAL, DAVEY, EWBANK, CHICAGO PNEUMATIC, MICHAELS, AMERICAN, HOWARD TURNER, INGERSOLL RAND RO-300, CAREY
SKYE 300T MUD ROTARY RIG (Ref#16N) New rig, 6 x 300 (90 meters) depth capacity
Trailer:
7,000lb Rated tandem axle, 5 x 10 ft open grating bed, surge breaks, leveling jacks (3), pipe racks (2), 2 ball coupler, spare tire
Dimensions: Overall length 190, width 82, transport height 70, operating height 130, operating weight 4,750lbs (average).
Mast 78 travel
5,000# pullback
2 full flow swivel
200 GPM mud pump powered by 10hp diesel engine and hoses
3000PSI hydraulic system powered by 19hp diesel engine
Controls and gauges for rotary, drawworks and pressure
300 of 2 x 5 drill pipe
(3) 3-7/8 drag bits
(1) 5-7/8 drag bit
(1) 5-7/8 tricone bit
Wrenches and handling tools
Complete rig, ready to drill
Will fit in a 20 container
Price: $47,500 delivered to port in Houston, Texas.
MUD ROTARY RIG (Ref#4964Na) 3 x 4 mud pump, no air, 4 cyl diesel deck engine, 17 kelly, 10 retractable table, pulldown, air clutches, mounted on 1980 Ford Detroit engine, 4 hydraulic jacks, 400 of 3-1/2 x 15 drill pipe, small hydraulic winch, large hydraulic winch Price: $30,000
1980 FORD 9000 WATER TRUCK (Ref#4964Nb) 2000 gallon flat steel tank, toolboxes, no crane or welder, no aux fuel Price: $25,000
SHOP BUILT RIG (Ref#12013) Manufactured 1996, 200 depth capaacity ,table drive, square kelly, mud rotary rig, 6 cyl Industrial gas deck engine, developmental air compressor, mounted on 1987 GMC 7000 single axle truck w/366 engine, 5 speed transmission, all hydraulic, 20 kelly, 24 derrick, reworked 2001, new hyd winch and Mission 1-1/2 x 2 mud pump, 400 of 15 drill stem, bits, subs, tooling, mud pit, new paint, excellent condition, currently drilling Price: $30,000
SHOP BUILT RIG (Ref#2010N) similar to Gardner Denver 1000, PTO, mounted on 1974 International Fleetstar tandem axle with rebuilt 250 Detroit diesel engine, less than 100 hours, 3 x 2 centrifugal pump, no pulldown, 6 Acker rotary table, double drum drawworks, 3 hydraulic leveling jacks, 20 drill collar, 660 of 2 7/8 x 20 drill pipe & pipe trailer, bits, subs, etc., water truck Price: $50,000
SHOP BUILT ROTARY DRILLING RIG (Ref#3710N) 4 cyl turbo deck engine, mounted on 1965 Mack B61 truck, 30 derrick, 4 x 25 square kelly, 3 King swivel, 5 x 6 MCM centrifugal mud pump, retractable table, 28 hole for 16 casing, 200 of 4-1/2 drill rods, 3 hyd leveling jacks Price: $60,000
SHOP BUILT RIG (Ref#13643N) mounted on Ford 9000 tandem axle truck, 3 x 4 Mission mud pump, hydraulic grouter, 350 drill pipe, (1) 8-1/2 tooth bit, (1) 8 claw bit, diesel deck engine, stabilizer, new mud tub, 2 conductors Price: $50,000
SHOP BUILT ROTARY RIG (Ref#1900N) mounted on 1988 Ford LN8000 truck with 8.3 Cummins engine, 5 x 6 Gardner Denver mud pump, 5-1/4 retractable table, double drum drawworks, 18 x 3 square kelly, mechanical clutches, hydraulic pulldown, breakout wrench, 400 of 15 x 2-7/8 pipe, stabilizer,
1980 FORD LN8000 WATER TRUCK L10 Cummins, 2200 gall steel rect. Tank, pipe racks, toolboxes
Joy 175 air compressor (on water truck)
Package Price: $55,000
SHOP BUILT ROTARY RIG (Ref#15720N) trailer mounted, 12 table, Brewster swivel, propane deck engine, 1500 of Range 2 4-1/2 pipe, Price: $170,000
SHOP BUILT COMBINATION CABLE/MUD ROTARY RIG (Ref#2458Na) Isuzu diesel deck engine, mounted on 1998 GMC Topdick with Cat diesel engine, Wheatley 4 x 5 mud pump, LeRoi developmental air compressor, mud mixer, walking beam, stabilizer, hammer, bits, subs, etc., 4 hyd leveling jacks, 200 of 2-3/8 x 10 N rods, some tools Price: $95,000
G & L MUD ROTARY RIG (Ref#14623N) Manufactured 1997, 4 x 5 Gardner Denver mud pump, 4 wheel drive truck, 150 of 2-3/8 x 20 drill pipe, no rod box, mounted on 1967 truck with 190 Industrial Engine, 1 piece mast Price: $35,000
BADGER 1250 (Ref#4451N) Manufactured 1995, 5 x 6 mud pump, mounted on International truck with diesel engine, hydraulic pulldown, air clutches, 23 kelly Price: $170,000
BADGER 1250 (Ref#4418) Similar to Midway - Manufactured 1987 - 2 available - excellent condition, 5 x 6 duplex mud pump, 7.5 fixed rotary table, chain pulldown, rod box, pipe slide, winch, kelly, kelly bushing, handling tools, Mounted on Ford 9000 tandem axle with Detroit 8V92 Off market
BADGER 1250 (Ref#9521Nb) Manufactured 1982, mounted on 1981 International with Detroit 6V92 engine, 5 x 6 ˝ Failing mud pump, 100S2 Leroi air compressor, front & rear leveling jacks, welder, 300 of 2 7/8 drill pipe Price: $120,000
BADGER 1250 (Ref#9521Na) Manufactured 1981, mounted on 1995 Ford Aeromax with 575hp Cat engine, 5 x 6 ˝ Failing mud pump, 256 Leroi air compressor, rear leveling jacks, welder, 300 of 2 7/8 drill pipe Price: $140,000
BADGER 1250 (Ref#6983N) Manufactured 1980, Spicer PTO, mounted on 2001 International with N14 Cummins engine, all new hydraulics, Gardner Denver 5x6 mud pump, 667 GD air compressor, 2000 DSM table, mechanical clutches, hydraulic pulldown, 2 rear hydraulic leveling jacks, 200 of new 2 7/8 x 20 drill pipe, all tools Price: $180,000
BADGER 1250 (Ref#2019N) Manufactured 1980, 1000 drawworks, Spicer PTO, mounted on 1980 International Paystar 5000 with all wheel drive, with DT466 diesel engine, 13 speed transmission, 35 mast, 5 x 6 Gardner Denver mud pump, LeRoi 50S2 air compressor, 8-1/2 Speedstar stationary rotary table, hydraulic pulldown, mechanical clutches, 2 hydraulic leveling jacks, breakout tongs, tools, 300 of 3-1/2 x 20 flush joint drill pipe, good condition Price: $145,000
BADGER 1250 (Ref#9521Nd) Manufactured 1979, mounted on 1995 International with Cat 3406 engine, 5 x 6 Gardner Denver mud pump, 667 GD air compressor, Moyno injection/grout pump, front & rear leveling jacks, welder, 300 of 2 7/8 drill pipe Price: $130,000
BADGER 1250 (Ref#9521Nc) Manufactured 1978, mounted on 1997 Mack, 5 x 6 Gardner Denver mud pump, 667 GD air compressor, front & rear leveling jacks, injection pump, welder, 300 of 2 7/8 drill pipe Price: $120,000
2500 MUD ROTARY RIG
(Ref#861N) Double drum, 54 x
100,000# hydraulically raised mast, DT466 diesel engine on deck, mounted on
tandem axle trailer, 3 hydraulic leveling jacks, 3 line block 5/8 line, 9-1/2
rotary table, 4 x 37 kelly, 7 x 10 Wheland duplex mud pump powered by DT466
diesel engine Price: $210,000 OFF MARKET
JOY
2000 RIG (Ref#9958)
triple drum, air clutches including
sandline, kelly drum has band clutch, 48 1976 hydraulically raised mast x
100,000#, plus an additional 10 extension (not on rig), mounted on
International tandem axle truck with 3208 Cat diesel engine, PTO, 4 fold down
work platform, 13 speed transmission, 3 hydraulic leveling jacks, tires 80%,
hook and block, breakout cylinder, weight indicator, pop off valve, 3-1/2 round
fluted kelly, 5-1/2 x 8 Gardner Denver duplex mud pump hydraulically driven
with rebuilt fluid end, 10-1/2 Failing table retractable, one set of tongs, 1
load rig (all is contained on rig), mast is one piece, hook load 80,000#,
cleaned, painted good condition, new air clutches, air tank and air controls
Price: $115,000 OFF MARKET
Available at extra cost: 2-7/8 x 31 American open hole drill pipe
JOY 1000 ROTARY KELLY RIG
(Ref#993N) manufactured 1960s,
mounted on 1992 International single axle truck with DT 466, PTO, 3 x 4
diaphragm pump, no air, 2-1/2 diameter kelly, 2 mechanical leveling jacks,
drilled to 800 Price: $45,000 OFF MARKET
POARCH BROTHERS REVERSE CICULATION RIG (Ref#1272N) Trailer Mounted Reverse Circulation Rig, Manufactured 1965, Double Drum Drawworks with Air Clutches, 60 - 65 Cable Raised Derrick, 26 American Table (non-retractable), Cathead, Low Hour CAT 3208 Engine on Drawworks w/ 4 speed, Allison Automatic Transmission, Cummins 335 HP Engine on MCM 6 X 8 Centrifugal Pump, Hydraulic Leveling Jacks, King 4 Swivel, 4 Lines on Kelly Drum, 3 Lines on Trip Drum, Approx. 1000 of 5-9/16 FH x 30 Drill Pipe, (4) 8-5/8 Drill Collars, Modified Drill Pipe Float elevated height so that it can backed up to rig, Assorted Handling Tools - reamers, subs, bits, elevators, tongs Price: $280,000
WESTERN GEOPHYSICAL EXPLORATION RIG (Ref#12981) mounted on single axle truck with Ford 350 rebuilt gas engine, PTO, 5 x 6 mud pump, no compressor, 400 15 drill pipe, 18 bit, Failing tower, 1 collar, 3 hydraulic jacks, 5-1/4 table Price: $30,000
SHOPBUILT GEO RIG (Ref#13488) mounted on Mack Midliner, PTO, 23 fluted kelly, 5 x 6 Gardner Denver mud pump, rebuilt drawworks, clutches and brakes, new pins and bushings, rebuilt table and PTO, 4 stabilizing cylinders w/hydraulic locks, new hydraulic valves, pump lines and tank, 200 of 2-3/8 Mayhew pipe Price on Request
DAVEY DK90 (Ref#1715Na) Manufactured 1988, multi directional drill, 11 stroke, angle capability, Perkins 4 cyl 1004T deck engine (new 2006), hoisting winch, wireline winch, tram winch, Wirth rotary head for coring and augering, Bean pump, Komotsu D20 undercarriage, can be positioned on steep slopes with the derrick vertical for soil sample work or rock coring. 24 volt electric start system, Track drive motors changed to higher torque motors used on excavators and the tracks will now spin in difficult conditions, breakout wrench, main hoisting winch, wireline winch on drill, cathead, tram winch for assisting the carrier, 4 cyl Bean water pump, used for geotechnical and sampling and has augered to 110 deep, rock cored to 400, air hammer to 120, ready to drill Price: $65,000
DAVEY DK90 (Ref#1715Nb) good parts machine, Komotsu D20 undercarriage with excavator motors, Perkins 236T engine, hoisting winch, tram winch, wireline winch, Bean pump, rod clamp, 11 stroke, (2) separate heads hydraulically positioned by sliding off hole unit. Price: $17,500
DAVEY M-8 (Ref#2804Na) Manufactured 1978, mounted on 1990 International truck with 350 Cummins engine (rebuilt 2007), 6V71 Detroit diesel deck engine (rebuilt 2007), 550/150 air compressor (rebuilt 2006), 4-1/2 x 30 kelly, dust collector, 300 drill pipe, good condition Price: $47,500
DAVEY M8W KELLY AIR RIG (Ref#2884Na) Manufactured 1976, mounted on Louisville Ford truck with 54 gas Ford engine, 5 and 4 transmission, 38,000# rear, 26-1/2 Kelly bar 4 round, King swivel, 35 tower, 7-1/2 sliding table, 671 Detroit diesel deck engine, 500 cfm/125 psi Davey air compressor, water injection system hydraulically operated, 100 of 4 x 20 flush wall drill pipe, can drill to 900, can hold 300 steel Price: $45,000
DAVEY M8 KELLY AIR RIG (Ref#2884Nb) Manufactured 1976, mounted on Ford Louisville truck with 5234 gas engine, 5 and 4 transmission, 38,000# rear, 500cfm/125 psi Davey air compressor, 671 Detroit diesel deck engine, 5 x 32-1/2 Kelly bar, 7-1/2 fixed table, 46 tower (can be reduced), 450 of 5 x 20 drill pipe, 2 slips, 2 wrenches, 2 subs Price: $40,000
DAVEY M8 KELLY AIR RIG (Ref#2884Nc) Manufactured 1971, mounted on Ford truck with 534 gas engine, 5 x 3 transmission, 38,000# rear, 671 Detroit diesel engine on deck, 500 cfm/125 psi Davey air compressor, 26-1/2 x 4 round Kelly, 7-1/2 fixed rotary table, water injection system, 4 Kelly bar, 100 of 4 drill steel, wrench and slips, 100 of 4 drill pipe, rod rack, chain pulldown Price: $40,000
DAVEY M8 KELLY AIR RIG (Ref#2884Nd) Manufactured 1975, mounted on tandem axle Ford Louiville truck with 534 gas engine, 5 x 4 transmission, leveling jacks, 38,000# rear, good tires, 671 Detroit diesel engine, 500 cfm/125 psi Davey air compressor, rod box, holds 300 drill pipe, 100 of 4 x 20 drill pipe, slips, 7-1/2 fixed table, 32-1/2 x 4-1/2 Kelly bar, runs 4 drill string, 46 one piece mast (can be reduced), work platform Price: $40,000
PARTS FOR DAVEY RIGS (Ref#2884Nparts):
New 4 x 32-1/2 kelly
500/125 Davey piston compressor (rebuilt)
3 hydraulic pumps for Driltech
2 top head drive motors for Driltech
2 additional pumps for Driltech
New top for Drilltech carousel
New Rotation pumps for Reedrill
New tophead drive for Reedrill
Spare #160 pulldown chain
DAVEY M8 (Ref#9192N) Manufactured 1976, 500/120 piston compressor, mounted on Ford 500 truck with Detroit 6V71 engine, 200 of 3-1/2 drill pipe, 25 kelly, 35 mast Price: $40,000
Available at extra cost: 900/350 air compressor, skid mounted, Cat engine
DAVEY M8 (Ref#3777N) 400/200 piston air comressor, 671 Detroit, 26 kelly, mounted on Ford 9000 truck ith Cummins engine, 8 speed LL transmission, water injection, 300 of 4 x 20 drill pipe, fully tooled (extra air end, extra 671 Detroit engine) many extra parts Price: $55,000
DAVEY M8 (Ref#7563N) mounted on 1975 International tandem axle truck with Detroit 671 engine, no air, no mud, no water injection, 8 retractable table, 3 square kelly, mechanical clutches, no pulldown, sitting a few years, sitting a few years Price: $22,500.
DAVEY M8 (Ref#5952N) Manufactured 1970, 550/250 air compressor, 671 Detroit diesel engine on deck, mounted on Ford 8000 truck with 534 gas engine, 25 kelly, mechanical pulldown, mechanical clutches, 300 of 4 x 20 drill pipe Price: $55,000
DAVEY M8 (Ref#2780N) Manufactured 1970, 500/125 air compressor, 671 Detroit engine on deck,mounted on 1975 White truck with 220 Cummins engine, mechanical clutches, stationary table, chain pulldown, 300 of 3-1/2 drill pipe, 3 jacks, truck needs new rear end Price: $29,500
DAVEY M8 (Ref#10077N) Manufactured mid 1970s, 500/100 air compressor, Detroit deck engine,mounted on Ford truck with gas engine, no mud, 7-1/2 stationary table, 4-1/2 kelly, pulldown, mechanical clutches, 3 hydraulic leveling jacks, 200 of 4-1/2 x 20 drillpipe, no tools, good condition, ready to go Price: $70,000
DAVEY M-8 (Ref#10988N) Manufactured 1972, 500/125 air compressor, 5 x 6 mud pump, Detroit deck engine, 7-1/2 kelly, stationary table, Bean water injection, mechanical clutches, mounted on Ford L9000 tandem axle truck w/540 gas engine, 8 button bit, no tools Price: $55,000
DAVEY M8 (Ref#671Na) Davey 500/120 air compressor, Gardner Denver 3-1/2 x 5 air driven mud pump (can be unmounted from rig and used as stand alone unit), 671 Detroit diesel deck engine, Gardner Denver injection pump, 23 kelly bar, 7-1/2 rotary table, mounted on Ford tandem axle truck with gas engine Price: $75,000
(Ref#671Nb) 70 joints (1,400) of 2-7/8 x 20 bottleneck drill pipe Price: $300 per joint
DAVEY M8A (Ref#13694N) Manufactured 1967, air compressor, no mud, 671 Detroit diesel powers rig, mounted on 1967 Ford F800 tandem axle truck with Cat V8 diesel engine, (10) pcs 20 drill steel, 35 mast, fresh paint, currently drilling Price: $35,000
Has second rig available for parts
DAVEY M-8 (Ref#5217) -1975, 671 diesel engine, 550 cfm compressor, 250 gal water tank, 3-1/2 x 47 kelly, 300 flush 20 rod, on old International truck with gas Price: $35,000 Also has 3-1/2 x 20 kelly for additional cost
DAVEY M8A (Ref#8741Na) Detroit 6V71 deck engine, mounted on International with gas engine
Price: $75,000
Price with 450 of 4-1/2 FJ drill pipe: $80,000
DAVEY M8 (Ref#607N) 2 available, manufactured 1968 and 1969, Detroit 318 deck engine, mounted on Ford 8000 truck with gas engine, 450/250 piston air compressor, 3 x 23 kelly, 10 retractable table, 35 mast, Myers 12 gpm water injection, hydraulic pulldown, mechanical clutches, no mud, breakout wrench, 1 front and 2 rear hydraulic leveling jacks, 300 of 3-1/2 x 20 drill pipe, sitting a few years Price each: $40,000 Price for both: $60,000
DAVEY M8 (Ref#3775N) Manufactured 1959, needs head gasket in Detroit, compressor needs rebuilding, mounted on 1959 Ford tandem axle truck POR
DAVEY M7A (Ref#7298) Manufactured 1959, mounted on International tandem axle truck with gasoline engine, all wheel drive, Cat diesel engine on deck, 500 compressor which is blown, 250 of 4 x 20 drill pipe, uses 27 kelly, needs work on controls and hoses, stacked for several years Price: $28,500
EWBANK 51 (Ref#4495) Manufactured 1979, 5 x 6 Gardner Denver, 3-5/8 kelly, 2-7/8 pipe, 1500 Midway table, mounted on 1971 Mack truckwith 327 Mack engine Off Market
EWBANKS 51 (Ref#2697N) Manufactured 1976, PTO, mounted on 1978 Chevy C70 with 427 gas engine, 5 x 6 Failing mud pump, developmental air compressor, 5 ź retractable table, 24 x 3 ˝ fluted Kelly, hydraulic pulldown, mechanical clutches, breakout wrench, 1 front & 2 rear hydraulic leveling jacks, mud tank, subs, 480 of 2 7/8 x 20 drill pipe (2 3/8 IF conn) Price: $70,000
EUBANK M-100 (Ref#3942Na) Manufactured 1980, Detroit 8V71 engine, 3 drum, 18 table, 7 ˝ x 10 FXD mud pump, 6 drill collars, 1000 of 4 ˝ bottleneck drill pipe, pipe box with laydown buggy, rated for 3500 Price: $177,500
CHICAGO PNEUMATIC RT-2500 (Ref#4635N) Manufactured 1981, 840/350 air compressor, 50 mast, 30 kelly, 20 retractable table, 70,000# hoist, cable and chain auto feed, mounted on 1981 Hendrickson carrier with 300 Cummins, 1000 of 3-1/2 x 30 drill pipe, tools, jacks, rig welder Price: $360,000
CHICAGO PNEUMATIC RT-2000 (Ref#11290) Manufactured 1979, mounted on Ford 8000 tandem axle truck with Cat 3208 diesel engine, 40 x 60,000# hydraulically raised mast, 10-1/2 rotary table, 5 x 10 Gardner Denver mud pump, drillers and helpers work platform, chain pulldown, kelly and kelly bushing, hydraulic leveling jacks, rod box, hook/block, trailer and 500 of 4-1/2 drill pipe (10 and 20) Located South Pacific Price: $95,000
CHICAGO PNEUMATIC RT-1800 (Ref#2272N) Manufactured 1981, 825/250 GHH air compressor, 50 mast, 35 kelly, 5-1/2 x 8 mud pump, 10 retractable table, air clutches, chain pulldown, breakout tong, 5 x 35 fluted kelly, mounted on Crane Carrier with 400 hp Cummins engine, PTO, 3 leveling jacks Price: $175,000
3-1/2 x 20 drill pipe availble at extra cost
CHICAGO PNEUMATIC RT-1800 (Ref#828Na) Manufactured 1978, 5-1/2 x 8 mud pump, 825/250 air compressor, 10 retractable rotary tble, 30 mast, mounted on Crane Carrier, rebuilt chain, bearings and table, rebuilt controls and gauges, good running condition Price: $160,000 (pipe available at extra cost)
1995 INTERNATIONAL 9370 10 WHEEL WATER TRUCK (Ref#828Nb) Cat engine, 2300 gallon Flatwater Fleet tank, 200 gallon electric fuel pump, 8600# crane cattachment, radial remote horizontal boxes Price: $60,000
CHICAGO PNEUMATIC RT-1800 (Ref#3675N) Manufactured 1978, Range III derrick with board for standing doubles, 825/300 air compressor, Gardner Denver 5-1/8 x 8 mud pump, mounted on 1997 International TS tractor, Series 60 500 hp Detroit diesel engine.
1994 40 Strick DD trailer, 1200 of 4-1/2 FJ drill pipe (like new), all handling equipment
Price:
$195,000 PRICE REDUCED TO $175,000
MICHAELS 3500 (Ref#14598) mounted on tandem axle heavy duty frame trailer, 4 hydraulic jacks, 2 screw jacks, 60 x 120,000# mast with racking board, 12.5 elevated substructure, Detroit diesel engine, Allison transmission 750 DRD heavy duty drawworks, hydraulic pulldown, (2) cathead, 18 Howard Turner rotary table, 180 barrel mud system, Swaco shale shaker, 2 mud agitators, 1 degasser, National C150 mud pump with Detroit 671 diesel engine, Gardner Denver FO-29 mud pump w/671 Detroit diesel, 75 joints of 3-1/2 drill pipe, (2) 5-1/2 drill collars, Martin Decker weight indicator, 4-5/8 x 34-1/2 round fluted kelly, control console, 600 gallon fuel tank, 3 sheave 35 ton travelling block, (2) BJ type C tongs, located Caribbean Off market
5000 SHOP BUILT MUD ROTARY RIG (Ref#13805) 5 x 6 mud pump, 58 x 150,000# mast, single drum, sandline 1/2000 cable, trailer mounted, 21 rotary table, 8 and 6 drill collars, 2000 of 4-1/2 drill pipe Off Market
AMERICAN 3500 MUD ROTARY RIG (Ref#132N) American single drum drawworks, Air clutch, 12 Kelco cat head, Hydraulic breakout, 7/8 drilling line, 65 x 150,000# single piece mast hydraulically raised, Mounted on tandem axle trailer with leveling jacks, Cat walks, 8V71 Detroit diesel on deck with Twin Disk torque, 12 Brewster table with table bushings, New air rotary clutch, 7-1/4 x 10 Gardner Denver duplex mud pump (new fluid end parts) powered by 6V73 Detroit diesel, 38 square Kelly, S-3 Brewster swivel
Support equipment:
2,200 of 3-1/2 drill pipe and basket
10 collars
BJ tongs, collar clamp, two sets slips, subs
Geolograph, diesel light plant
Air compressor, hydraulic breakdown
2 pipe racks, doghouse, 7000 gallon fuel tank
80 barrel water tank trailer mounted
Price: $340,000
SHOP BUILT 2500 TRAILER MOUNTED DRILLING RIG (Ref#3130N) 50 x 70,000# Derrick, Hacker Rotary w/ 14 inch hole under rotary table, 2 ˝ King Water Swivel w/ 70,000 lb hookload, Both Blocks on 4 lines of 5/8 Cable, Sequin Machine Shop Drawworks w/ Double Stack Drums, Rig Has a 5 Floor From Ground, Extra Wide Rear Tires, Drawworks and rotary table powered by V-6 53 Series Detroit w/ 5 speed transmission, Mud Pump 5 X 10 Worthington powered by 5.9 Cummins in-line 6 w/ 5 speed transmission, 4 point corner hydraulic lifts (new), Drill pipe 3 ˝ I.F. pipe approx. 1,360 ft, w/ 3- 5 ź X 3 ˝ I.F. drill collars, Includes Slips, tongs and some extra parts for mud pump, 1979 International 2.5 Ton Haul Truck, Pipe Trailer-3 axle goose neck trailer w/ pipe slide, 500 gallon trailer mounted diesel tank with new pump and filter, 4000 gallon water truck: 1986 International Price: $175,000
2500 SHOP BUILT TRAILER MOUNTED RIG (Ref#2587N) 6x32 double drum drawworks, ž drilling line, (2) Detroit 453 diesel engines, Fuller 10 speed transmission, 55H x 125,000# tubular mast, 7-sheave crown block, (2) hydraulic raising rams, (2) McKissick blocks, King 75WP swivel, 4-1/4 square kelly, mushroom drive bushings, Hacker 12 rotary table, 8 w x 28 L T/A lowbed trailer, (4) hydraulic leveling jacks, (2) outriggers
PUMP/MUD SYSTEM, Gardner Denver FYFXDH 7 x 10 Duplex Mud Pump, Detroit 471 Detroit diesel, 8W x 29L S/A skid with (2) hydraulic lifting cylinders.
8 W x 4H x 20L single tank mud system, Harrisburg 6-cone desilter, vibrating shale shaker, Mission 5 x 6 centrifugal p/b Detroit 471 diesel engine, hydraulic system, 8 x 34 OAL S/A skid
PIPE TRAILER 8W x 36L tandem axle pipe trailer w/pipe slide, 2100kk 4-1/2 Grade E Range 2 drill pipe, 4-1/2 100-ton DP elevator, 1-1/2 x 36 L elevator Links
Package Price: $275,000
HOWARD TURNER 3000 (Ref#10868N) 3000 depth capacity, triple drum, kelly drum, drill pipe drum, bailing drum, 58 x 150,000# mast, 17-1/2 rotary table, Detroit 60 Series diesel engine, mounted on 2 axle trailer, 4-1/2 x 37 kelly and kelly guide, National C150 mud pump with twin 671 diesel engines, no drill pipe, no collars Off Market
HOWARD TURNER M2000 (Ref#14336N) triple drum drawworks, Gaso 5 x 10 mud pump, 12 Brewster table, 50 derrick, 6 part line, McKissick block, mounted on Kenworth chassis, 4 hydraulic jacks Currently dismantled
HOWARD TURNER 1500 (Ref#5883) Manufactured 1968, 671 Detroit on deck, 24 kelly, 10 retractable table, 2 swivel, mounted on International single axle truck with gas engine Price: $40,000
INGERSOLL RAND RO-300 (Ref#3649N) Manufactured 1981, 1500 capacity, (2) 5-1/2 x 10 Gaso duplex mud pump on rig, mounted on tandem axle International truck powered by 8V92 Detroit diesel engine, 3 hydraulic leveling jacks, PTO drive, 36 hydraulically raised mast, 4-1/2 x 25 kelly, 1500 of 4-1/2 x 20 flush wall drill pipe, 10 retractable table Price: $125,000
INGERSOLL RAND RO-300 (Ref#2450N) Manufactured 1983, PTO, mounted on 1983 International Paystar 5000 with Detroit 8V92T engine, 650/250 air compressor, 5 ˝ x 8 mud pump, 8 ˝ retractable table, 3 x 28 Kelly, hydraulic pulldown, mechanical clutches, breakout wrench, 4 hydraulic leveling jacks, 300 of 4 ˝ x 20 drill pipe Price: $245,000
INGERSOLL RAND RO-300 (Ref#2848Nh) mounted on International Paystar with Detroit 8V71 engine, (2) Gaso 5 x 10 rebuilt mud pumps Price: $170,000
CAREY (Ref#11065) Wheatly 6 x 6 mud pump, 2 x 21 kelly, non-retractable rotary table w/4-1/2 opening, mounted on 1996 Forl L8000 truck with dieselengine, PTO, 300 of 14 drill pipe Price: $70,000
SHOP BUILT RIG (Ref#13816) Built to Speedstar specs, 32 mast, 5 x 6 mud pump, developmental air compressor, mounted on 1971 Ford F600 with new 330 gas engine, 600 of 2-7/8 bottleneck rod, 5-1/4 retract table 3 speeds, 3 speed Ramsey transmission, 12000# winch, has been sitting for several years (but was running when parked) Price: $35,000
Tel: 516-536-7375 Fax: 516-536-7317 rigs@sunmachinery.com