IR RD20-III,
SCHRAMM T130XD, MOBILE SR-35
INGERSOLL RAND RD20-III
(Ref#15621Na)
Manufactured 2004, 17,673 hours,
idle since March 11, 2009 (company went to deeper work),
Cat 3412E deck engine, HR 2.5
Series IR 1250 cfm/350 psi air compressor,
Range III tower package,
Mounted on 5 axle carrier with
9418 miles.
Recent repairs:
new gearbox 15,000 hours,
all new hydraulic pumps and
rebuilt carousel 16,000 hours,
replaced compressor with rebuilt
compressor (16,200 hours),
installed new cam in deck motor
16,500 hours,
New injectors and new engine oil
pump.
Cleaned & painted.
Price: $480,000
INGERSOLL RAND
RD20
(Ref#10562N)
Manufactured
2001, 1250/350 air compressor, Cummins 700 hp deck engine, mounted on Crane
Carrier with Cummins engine, 120,000# pullback, handles Range III casing,
complete rig with 5000’ of 4-1/2” x 30’ drill pipe (3000’ new, 2000’ 95%),
currently working Price: $725,000 PRICE REDUCED: $550,000
INGERSOLL RAND RD20-III
(Ref#15621Nb)
Manufactured 2005, 16,112 hours,
idle since August 11, 2009 (company went to deeper work),
Cummins QSK 19C deck engine, HR
2.5 Series compressor rated 1250 cfm/350 psi,
Range III tower package,
Mounted on 5 axle carrier with
8770 miles,
Recent repairs:
May 2009 rebuilt compressor, Dec
2009 new turbo
Price: $480,000
(1) SCHRAMM
T130XD (Ref#15621Nc)
Manufactured 2003,
Sullair dual
capacity compressor 1350 cfm (3 cu m/min) / 350 psi (24.1 bar) or 1150 cfm (32.6
cu m/min) / 500 psi (35.5 bar), compressor removed will reinstall,
130,000 lb. (59,090
kg) pullback, 32,000 lb. (14,545 kg) pulldown, 106,600 in/lb (12,045 N-m)
torque, mast working clearance 52’10” (16.1m) spindle to table,
7600# main winch,
12,000# jib boom,
Detroit DDC/MTU
12V-2000TA (760hp) diesel engine on deck,
Cat 35 gpm water
injection pump, 5 g/hr hammer oiler,
Mounted on 5 axle
Crane Carrier 8 x 4 with Cat C12 (380 hp) diesel engine and Fuller RTO-14908LL
transmission,
Just
out of service, good condition
Price:
$380,000
MOBILE EXPLORATION SR-35 TOP
HEAD DRILL RIG
(Ref#3281N)
5200 original hours, Manufactured
1997
1350/350 Sullair air compressor 4000
hours
3412 DITA diesel engine
12000 ft/lbs torque head,
Retractable top head with 100,000#, 4-part line block
52’ high hydraulic raised mast,
Handles 42’ casing, (has run 2000’ of 12-3/4” x 42’ x 43 lb/ft casing),
21” table, 110,000# pullback with
cable feed and fast feed rate (1” cable),
Cat 30 gpm water injection and FMC
Bean 30 gpm water injection pump,
King tongs, 32’ clearance between
bottom of mast and table (for tongs and large casing),
Will handle 30’ drill pipe, 40’
casing,
On 5 axle Hendrickson carrier with
3408 Cat diesel engine and hydrotarder, Will travel 70 mph on highway,
Flat wrench, 4 1-2” slips, Rear
outriggers, external outboard, 12” for stability,
Dimensions/weight 58’L x 8’W x 13’H
– 98,000#. Currently drilling, good condition
Stacked, New Mexico
Price:
$450,000
SUN MACHINERY CORP
Telephone: (516) 536 7375
Fax: (516) 536 7317
email:
rigs@sunmachinery.com
www.sunmachinery.com
