Drill Pipe & Miscellaneous

DRILL PIPE  (Ref#12786N)

Used 4-1/2” drill pipe with 4-1/2” NC 46 connections, 16.6# G-105 R-2

(122 jts) x 31’ premium double white band 6”+ tool joints

Price:  $25 per foot

Used 5” drill pipe with 4-1/2” NC50 connections, 19.5# G-105 R-2

(113 jts) x 31’ premium double white band 6-1/4” + tool joints

Price:  $28 per foot

New 4” FH (NC40) x 95 #15.70 China Pacrim Pipes R-3

(190 jts) x 40’ – averable total 7600’

Inlaid hard banking, no coating

5-1/4” OD x 2-9/19” ID tool joints IU

Cut for a consistent length string

Price:  $45 per foot

(Ref#779Nb) Reverse drill pipe, 1800’ of 6 5/8” x 20’ Hacker pipe  Price:  $130,000

4” X 30’ RANGE II DRILL PIPE (Ref#2595N) full hole bottleneck Double White band pipe, 87 joints available  Price on request

(Ref#3375N) 38 joints of 20’ x 4 ½” IF bottleneck pipe, good condition

(Ref#3788NC)  35 joints of 4 ½” x 20’ drill pipe, 3 ½” reg tool joints

(Ref#6906R)  25 JTS (500’) of 4-1/2” x 20’ with 2-7/8 IF pinx box (Chicago Pneumatic)

(Ref#15574N)  3000’ of 4-1/2” x 20’ drill pipe (2-7/8 IF)

(Ref#2766Na)  2000’ of 4-1/2” x 25’ Ingersoll Rand T4 drill pipe, 2-7/8 IF conn, inspected by IR and rated 60% condition  Price:  $350 per joint

(Ref#342Nb)  2700’ of 4-1/2” x 25’ drill pipe  POR

(Ref#9119NB) 400’ of Ingersoll Rand 4” x 25’ drill pipe   Price on Request

(Ref#2766Nb)  300’ of 4-1/2” x 15’ Keystone/Franks pipe  Price:  $350 per joint

(Ref#2283Nd) 25 jts of 4-1/2” x 15’ (2-7/8 thread)  POR

(Ref#2283Ne)  20 jts of 20’ pipe (3-1/2” IF) with lugs  POR

(Ref#2283Nf)  1400’ yellow band, 5” X-hole 31’, (4-1/2 IF tool joints)  POR

(Ref#838Na)  540’ of 4” x 20’ drill pipe (3-1/2” conn, 300’ like new  POR

(Ref#838Nb)  400’ of 4” x 20’ drill pipe, 2-7/8 IF conn  POR

(Ref#8315N)  10 joints Ingersoll Rand T3 drill pie, 4-1/2” x 20’, 3-1/2 API conn, 95%  POR

(ref#4594Nb)  4-1/2” x 22’ rods (cut down from 25’), Schramm, 52 joints  POR

(Ref#5181N)  Reichdrill 690 rods, 4” x 20’,   POR

(Ref#11919Nb)  280’ of Speedstar drill pipe with flats, 4 ½” x 20’ with 2 7/8” IF connection   POR

(Ref#3012Na)  700’ of 4-1/2” x 25’ Ingersoll Rand T4 drill pipe - $350 per joint

(Ref#3012Nb)  8” hammer with 10” bit, used one - $3,500

(Ref#3012Nc)  6” hammer with 8” bit, good condition  -  $2,000

(Ref#3137N)  625’ of 4-1/2” x 25’ Ingersoll Rand T4 drill pipe with 2-7/8” IF conn, good condition - $9,500

(Ref#10644N)  4000’ of Ingersoll Rand 4-1/2” x 30’ drill pipe, 2-7/8” IF conn  Price:  $500 per joint

(Ref#3456N)   used 100 jts  (2500’) 4-1/2 x 25’ IR T4 drill pipe ( 2-7/8 IF conn) -  $450 per joint

(Ref#5902N)  used 49 joints 4-1/2” x 30’ drill pipe (3-1/2 Reg thread), like new condition, not IR flats $550 each

(Ref#15248b) used Schramm T450 drill pipe

  3-1/2” x 20’ @ $300 per joint (1,200’ available)

  3-1/2” x 20’ like new (300’ available)  Price on Request

(Ref#4214Nc)  500’ of 4-1/2” OD x 20’ drill pipe, 2-7/8 IF threads, near new condition POR

 (Ref#2705N) Reichdrill pipe 4 ½” x 20’ with 3 ½” connection, 860’ available  Price on request

(Ref#5947N)  (24) 4-1/2” OD x 15’ length with 2-7/8 IF  - 90%, used on Speedstar, flush wall pipe, 5” slots  Price on Request

(Ref#13089b)  New 200 joints of 4-1/2” x 30’ IR RD20 drill pipe with 2-7/8 IF conn, .337” wall thickness, internal upset  Price:  $800 per joint

(Ref#3288N)  2500’ of 4-1/2” x 25’ Ingersoll Rand drill pipe (3-1/2 Conn)  Price:  $300 per joint

(Ref#1251Nb)  Drilltech pipe 4-1/2” x 20’ (4” conn), 300’ available  Price on Request

(Ref#1251N)  Chicago Pneumatic drill pipe 4-1/2” x 20’ (4” threads), 300+’ available  Price on Request

(Ref#9548N)  Atlas Copco drill pipe, used 1-2 times, like new

2500’ of 4-1/2” x 30’ (2-7/8 IF)

2500’ of 4-1/2” x 30’ (3-1/2 Reg)

Price:  $700 per joint

NEW DRILL PIPE MADE IN USA   (Ref#14779N)

Ingersoll Rand, Schramm, Speedstar - 4-1/2” x 20’ - $525 per joint

Driltech 4-1/2” x 20’ - $575 per joint

Ingersoll Rand 4-1/2” x 30’ – heat treated and upset - $775 per joint  (8,000’ available)

Ingersoll Rand 4-1/2” x 30’ non-heat treated - $725 per joint (4000’ available)

Ingersoll Rand 4-1/2” x 25’ Grade D - $700 per joint

(Ref#3552R)  510’ of 4-1/2” x 15’ drill pipe with 2-7/8 IF, 34 joints, like new condition, pin x box with Keystone flates  Price:  $425 per joint

(Ref#9814Nb)  525’ of 4-1/2” x 25’ aluminum drill pipe, Driltech D40K, 3-1/2 reg pin x box (6) new (15 used)  Price on Request

(Ref#12628N)  NEW 4-1/2” diameter x 30’ length x 2-7/8 IF conn, 8.55 mm for Ingersoll Rand RD20, located Dubai  Price per joint:  $950

(Ref#10700N) 54 joints of 5” OD x 32’ double white band pipe, 19 lb/ft, 90-95%  Price on request

(Ref#296N)  300’ of 3” x 10’ external flush joints with Mayhew Jr. threads  Price on Request

(Ref#9814N)  (18 jts) 180’ of 2-3/8” x 10’ Mayhew reg, 2-3/8” th4eads, Mayhew flats, new, never used   Price:  $385 per joint

(Ref#794N)  3000’ of 2-7/8” IF thread x 30’ long, bottleneck  Price on Request

(Ref#12012R)  16 joints of 4 ½” x 20’ drill pipe (2 7/8” IF)  Price on request

Also available: 1 joint of 15’ x 7” OD

(Ref#4816N)  600’ of 4-1/2” x 20’ with 2-7/8 IF thread Reichdrill style pipe, 50-60%

(Ref#5340N) 300’ to 400’ of Reichdrill 3 1/.2” x 20’ drill pipe, 2 7/8” threads  Price on request

(Ref#8721Nb)  4-1/2” dia x 15’ with 2-7/8 IF (15) excellent condition (8) fair condition

(Ref#14867N)  (80-90 jts) 3-1/2” x 20’ with 2-3/8” IF connections  Price on Request

(Ref#4815N)  4000’ of 3-1/2” x 20’ with 3-1/2 IF conn, 4-3/4” tool joints, square shoulder, slots box end (1000’ is brand new)

(Ref#14051N)  400’ of 2-1/2” x 20’ drill pipe (brand new)

(Ref#8153Nb)  2500’ of 3-1/2” x 30’ drill pipe, 3-1/2 IF, white band  POR

(Ref#671Nb)  70 joints (1,400’) of 2-7/8” x 20’ bottleneck drill pipe  Price:  $300 per joint

(Ref#2848NC) 600’ of 2 7/8” IF x 25’ with slots  Price on request

(Ref#2848ND) 600’ of 3 ½” API  x 5’ with slots  Price on request

(Ref#2848NE) 600’ of 2 7/8” IF x 15’ with slots  Price on request

(Ref#2848NF) 1000’ of 2 7/8” IF x 20’ with slots, bottleneck  Price on request

(Ref#7363NA) 1000’ of 2 7/8” x 2 3/8” IF drill stem  Price on request

(Ref#7363NB) (2) 15’ drill collars  Price on request

(Ref#1475NH)  7 available, 4 ½ Drill collars  POR

(Ref#1907N)  900’ of 4-1/2” x 25’ drill pipe (3-1/2” IF conn, Ingersoll Rand T4  Price on Request

(Ref#2368Nc)  Schramm drill pipe 4” x 25’, 1,450’  Price per jt  $350

(Ref#2368Nd) 

Ingersoll Rand 8” hammer, Ingersoll Rand 6” hammer (QL60), Holte perforator, 25’ drill collar (7-5/8”) hosing, head, swing, bit and hammer (set up for 7” casing) for symmetrix system  Price:  $20,000

8” Ingersoll Rand hammer with 12’ fluted stabilizer and 9-7/8” bit (Ref#302Nb) Price:  $8,500

(Ref#5548N) TRW Down the Hole Hammer, brand new, never used, model SD4  Price on Request

Also available: 2 joints of 2 3/8” pipe & 4 ½” button bit

1500’ of SCHRAMM DRILL PIPE  (Ref#5059) 10’, 15’, 20’ and 25’ lengths - POR

(Ref#8860Nb) Holt 8” air operated casing hammer with hydraulic attachments

(Ref#8860Nd) Sand Piper 3” double diaphragm, air operated

(Ref#8860Ne) Holt casing extractor

 (Ref#8860Ng) Driltech 4 ½” x 20’ drill pipe, 3 ½” reg conn

(Ref#8860Nh)  Various bits, subs, etc

ALUMINUM INGERSOLL RAND DRILL PIPE  (Ref#5108N)  4500’ (150 jts) of 4-1/2” x 30’ x 2-7/8 IF connections, used for 9 wells.  New cost $300,000   Price now:  $200,000

8” DRILL COLLARS  (Ref#9468N) 6-5/8” reg conn, new never used, 400’ available

54” CLUSTER DRILL  (Ref#12460N)  Ingersoll Rand, with (9) DHD380W hammers and (9) 10” bits.  Also includes (9) spare bits (needs 5’ Calex pipe).  Price:  $65,000

INGERSOLL RAND CD 36-5 CLUSTER DRILL (Ref#4775R)  uses IR 380 series hammers or equivalent, comes with 5 top subs, 8” BECO box & pin, currently set up for raise bore, comes with shop/storage skid, good condition  Price:  $22,500

19” DOWNHOLE HAMMER (Ref#3030Nb) with 19” & 24” bits  Price:  $94,500

(Ref#5114N)  Numa 120 Down hole hammer with 17.5 button bit, low hours, excellent condition, stored inside  Price on request

INGERSOLL RAND 112, 12” HAMMER (Ref#4680Na)

Mission 12” hammer  (Ref# 4680Nb)

HOLTE CASING DRIVER (Ref#3788Na) Brand new, model 140, set up for 3 ½” drill rod  Price:  $28,500

HOLTE CASING DRIVER (Ref#3788Nb) Used, model 140, set up for 4 ½” drill rod  Price:  $23,500

TIGER TIERRA AARDVARK CASING HAMMERS (Ref#9044Nc) 2 available  Price:  $12,500 each

AARDVARK 1220 HAMMER (Ref#1197Nc) good condition  Price:  $16,500

TIGER TIERRA BANGER 612 CASING HAMMER  (Ref#424N)   Price On Request

(Ref#3012Nb)  8” hammer with 10” bit, used one - $3,500

(Ref#3012Nc)  6” hammer with 8” bit, good condition  -  $2,000

CFA AUGERS  (Ref#341N)  24” diameter, includes (3) 20’ sections and (1) 24” cutting head  Price:  $10,000

H20 STINGER CABLE TOOL WITH GIL BEETLE MAST  (Ref#10266Nd)  mounted on 1987 Ford F700, runs 10’ rods, all hydraulic, Perkins diesel engine  Price:  $70,000  REDUCED TO $35,000

Extra equipment at extra cost:  Beetle mast cylinder, arm cylinder, (13) 4” steel rods, (2) 3” steel rods, (1) 3” starter sub, (38) 4” alum rods (good), (21) 4” alum rods (scars), good working condition

DERRICK FOR INGERSOLL RAND T4  (Ref#67N)  1972, worm gear rotary head, all cylinders, chains, heads, good condition  Make Offer

DERRICK FOR INGESOLL RAND TH60  (ref#7022Na)  39’, new, never used, with tophead and cylinder, flatstock, reinforced for deep wells,  Price:  $85,000

New ¼” diamond plated steel deck  Price:  $15,000

DERRICK FOR DRILTECH D25K  (Ref#10101N), with pullys, 2100 hours  Price:  $40,000

SCHRAMM GROUTER  (Ref#5842N)  Manufactured 1989, excellent condition, stored inside, only used a few times, trailer mounted, horizonatal shaft, powered by 4 cyl gas Briggs and Stratton 10 hp engine, drawbar, safety chains, electric start with aux rewind, 1.4 gal fuel tank capacity, 48” W x 72” L x 54”H

Mixer:  holds (2) 94 lb bags of cement, slurry cap, 4.0 cubic ft, drums tilts 90 degrees, includes bag breaker and guard

Paddle:  variable speed hydraulic motor, chain and gear reduction

Holding tub:  holds (4) 94 lb bags, slurry cap, 5-1/4 cubic ft, pump suction strainer

Hydraulic pump:  gear type hydraulic pump, 14 gpm flow, 1000 psi max pressure

Pump:  Moyno 3L4-CDR pump, 20 gpm, 300 max psi, variable speed

Price:  $9,000

GROUTMASTER GROUT PUMP (Ref#9044Nd) with mixing tub  Price:  $15,000

R2 GROUTER (Ref#9700Nd) trailer mounted, 65 gal hopper, 13 hp Honda engine, 2LL4 PCP pump, 700 lb, 54”H x 37” W x 56” L, 10-20 gpm, 250-500 psi discharge pressure, discharge hose, pressure gauge, quick couplers.  The Grout King utilizes a double paddle mix and/or a colloidal style mix.  Can pump at the same time mixing to keep a shearing action on the product to help with dehydration.  High and low speed mix and you can introduce the water into the hopper using the discharge pump.  Designed for a forward pressure flush, a reverse pressure flush and can lubricate the stator/rotor in less than a minute and a half.    Price:  $11,500

GROUT KING GROUTER  (Ref#1752R)  skid mounted, 13 hp motor, Moyno pump  Price:  $9,000

CUSTOM BUILT GROUTER  (Ref#3312Nb)  mounted on 1991 IHC 4 x 4, DT466 diesel engine, Allison transmission, 10,000 watt generator, welder, (2) 240 gallon wter tanks, automatic 600’ pump test reel  Price:  $65,000

10 BAG DSI GROUTER  (Ref#3312Nc)  Price:  $6,500

BOUNDRY WATER GROUT MACHINE  (Ref#1510Nb)  trailer mounted, 1980’s, powered by twin disc Briggs and Stratton engine, all hydraulic, slide up and down 

JACK UP DRILLING/CORING RIG  (Ref#9587)  operates in 80’ of water, composed of (6) 10’ x 40’ x 7’H FlexiFloats and (4) 10’ x 20’ x 7’ H Flexifloats, (4) spuds, (4) 80’ legs 3’ dia x 40’ long.  Currently on the platform is a Gardner Denver mud rig used for drilling and core samples.  Another type of rig such as a Mobile, Acker or CME could be placed on jack up.  Currently working.  Offered on rental basis:   $40,000 per month.   Will sell for $1,100,000

CEMENT PNEUMATIC BULKER  (Ref#5273N) 

Mounted on 1980 Kenworth W900 truck with NTC 350 Cummins engine, 15 sp trans, spring suspension, tubo conveyor blower

Tank built October 2006, 480 cu ft, 2 compartment, aluminum, weight 2600#, 14.9 psi operating pressure

Price for tank:  $75,000

Package price:  $105,000

MISC DRILL EQUIPMENT (Ref#7670N)

Drawworks

Engine

Top of mast

Swivel, sheaves

Price: $27,000 for the lot - Located West Texas.

CUSTOM BUILT GROUTER  (Ref#3312Nb)  mounted on 1991 IHC 4 x 4, DT466 diesel engine, Allison transmission, 10,000 watt generator, welder, (2) 240 gallon wter tanks, automatic 600’ pump test reel  Price:  $65,000

10 BAG DSI GROUTER  (Ref#3312Nc)  Price:  $6,500

DITWITCH 51X10 TRENCHER  (Ref#3312Ne)  Manufactured 2007, 2200 hours, air cooled diesel engine, 6-way grating blade, carbide rock cutting teeth  Price:  $22,000

CUSTOM BUILT CRANE/HYDROFRAC UNIT  (Ref#3312Nf)  mounted on 1991 International (converted school bus), 12,000# Marvin Harrington 4wd conversion DT 466 pre electronic, 4 speed Allison automatic transmission, 10,000# National crane, 30,000# Tulsa hydraulic driven (4 speed) frack unit, 6 cyl Perkins diesel, pump is 2,500 psi plunger pump (triplex), 150 gal per minute, custom built in 2005  Price:  $60,000 (12’ county road plow availble for additional cost.