DREDGES FOR SALE

Manufactured 1995, 8” x 10”, Cat 3406B, generating 308 hp @ 1800 rpm, 2 spuds, stern anchor winch, custom aluminum operators cab and engine cover, includes 2500’ of 10” dredge pipe, pipe flanges, dredge pipe fusing machine, located East Coast US Price: $325,000

overall dimensions 110’ x 30’, 12” x 14” Thomas submersible pump, rotary cutterhead, 70’ depth, 800 hp variable speed drive, 125 hp hydraulic system, 200 hp fresh water ump, 8’ x 10’ operators cab, captains chair, AC/heat, microwave, refrigerator, 60 gallon air compressor, touch screen controls, nuclear density monitor Call for More Details

2007, 2700 hours on engine, 3216 CAT engine, 8” GIW submersible pump on ladder, operates at 18” wide and 45” long Ships at 11’-10’ wide, 45,000lbs Price: $300,000

Built 2010, 14” x 12”, length 28.73m, width 7.15m, main engine Yanmar Z 280 (1850 hp), DaeWoo 2366 generator, located Korea Price: $800,000

Built 1998, 12” x 10” pump, Cat 3406 diesel engine, new suction intake, new suction pipe, new 10” discharge pipe from pump to stern, new safety cables and chains, new swing and spud cables, replaced all zincs, very good overall condition, located New York Price: $275,000

Built 2007, 51’ x 12’ x 10’5” (Height), weight 47,700 lbs., John Deere diesel 6 cylinder engine (425 hp @ 2100 rpm), fuel capacity 400 capacity, fuel consumption 20.6 gallons per hour, 30’ working depth, 10” x 12” pump. Extras: GPS system with submeter accuracy, flow meter for discharge pressure pipe, hose, saddle floats, navigation lights, spotlight, back camera

42’5”L x 11’3”W, 10’H, 22’ working depth, John Deere 6 cylinder (325 hp) engine, 300 gallon fuel capacity, 15.9 gallons per hour fuel consumption, 60 gpm slurry pump, cutterhead (cutter bar) diameter: 22”, length 108”, drive: recessed dual hydraulic motor, direct drive w/no gear reduction, speed: 0-95 rpm @ 2500 psi, dredge pump: IMS discharge 12”, suction 9.75”, impeller diameter 19.25”, electronic joystick controls in climate controlled cab, 12V electrical system, located South US Price: $265,000

Overall length (w/ladder) 95’, overall width (with side tanks) 18’3”, hull depth 5’, mean draft w/fuel 36”, spud length (each) 55’, spud weight (each) 3,200 lbs., approximate dredge weight (dry) 170,000 lbs., digging depth minimum 5’, maximum 45’, (3) piece sectional hull, side sections (2) 60’ x 4’, center sections (1) 35’ x 8’, prime mover Cat 3412 DITA 760 hp @ 2100 rpm, cutter module: cutting force 11,916 lbs., operating torque 202,580 lbs., cutting diameter 34” ID, dredge pump: suction 14”, discharge 12”, impeller diameter 36”, spuds square size 16” x 16”, electrical system: 24 VDC for starting, lighting and controls, all circuits fused for protection, fuel capacity 1800 gallon, hydraulic 300 gallon Price: $1,200,000

1951 Swintek, 60’ full length chain ladder, 12” x 14” Thomas pump, new impeller and side liner 2007, Detroit 8V16 dredge pump engine, hydraulic pump new 2008, Christmas tree cable arrangement, hull 37’ x 10’, pontoons (1) 38’, (1) 50’ each side, 25’ x 10’ tender boat Price: $145,000

Reworked, Overall dimensions and weight: 25' x 8' x 10', 70,000lbs, 160 HP diesel engine, Cummins 6 cylinder IMS pump 100 DA RHP. Work done: new hoses, engines and pumps gone through, all winches gone through, all pontoon tested for leaks. Completely cleaned and painted. Excellent condition. Price: $130,000

Cat/Detroit power, hydraulic driver (Pearce) underwater pump, belt driven deck pump, 90’ ladder, rotary cutter, Hofer valve Price: $275,000

33’ x 8’ x 8.4’, 22” draft, 20,000 lbs., fuel capacity 160 gallons, pump: type Hi-chrome cast iron, centrifugal, recessed impeller, impeller 18”, suction 4”, discharge 6”, capacity 3.75”, (2) pontoons 32” x 34” x 30.6’ Located Texas Price: $105,000

55’ x 17’10” x 4’, spud length 28’/30’, spud weight 1,145 lb each, digging depth minimum 3’, maximum 17’, Cat 3406B (460 p), dredge pump: suction 12”, discharge 10”, impeller diameter: 32”. Spud hoist winches: line pull 2,204 lb, line speed 81’ per minute, wire size 3/8”, drum capacity 83’. Swing winches: line pull 9,617 lb, line speed 40’ per minute, wire size ½”, drum capacity 208’. Ladder hoist cylinder: extending force 25,525 lb, retracting force 41,233 lb. Cutter module: cutting force 2,828 lb, cutter diameter 28”, shaft diameter 3”, cutter rating 35 hp, located New Jersey Price: $275,000

Built 1988, length 116’ x breadth 32’ x depth 6’, 4’ draft, 80’ ladder length, dredging depth @ 45 degree = 56’, @ 60 degrees = 69’, main engine: Cat 3512 (approx 8000 operating hours since major overhaul, Aux: Cat 3306 (approx 8,5000 operating hours since replaced), total connected BHP (continuous) 1300 hp, 70 hp cutter, main pump: Hydramaster HDMS42 18 x 16, suction diameter: 18”, discharge diameter: 16”, impeller diameter: 42”, swing winch rating: 12,000 lbs, ladder winch rating: 40,000 lbs, dredges truckable; 10 days to disassemble and load on trucks. Price: $1,400,000

floating and submerged dredge pipeline: 3,450’ floating pipeline on pontoons with (2) floating elbows, 2,700’ of 26” submerged line. Shore and levy pipeline: 4,820’ of 26” levee pipe and 1,600’ of 24” levee/dewater pipe. (12) anchors and buoys, 3000 to 10,000 lbs., balls and bells, floats, misc parts and pieces Price: $800,000

7.65 m3 (10 cy) power clamsheel bucket, 11.5m3 (15 cy) rock skip, 13.75m max digging epth, 760kw (1000 hp) Price: $800,000

16” CUTTER/SUCTION DREDGE (Ref#514) overall 195’ x 35’, Cat 12 cyl diesel engine, 500 tons per hours Price: $650,000

Hull 49’4” x 10 x 3’6”, engine: John Deere Model 8.1 turbo charged, radiator cooled (375 hp@2200 rpm), 12VDC electrical system, dredge ump 8” suction x 8” discharge, 31” cutterhead diameter, 6 blades, 40 hp, 4,000 lb cutting force, kicker spud cylinder 6” bore, 10” stroke, 2-1/2” rod diameter, connecting rod ends, spud hoist winches, excellent for lakes, ponds, mariana’s, docks, environmental clean ups, warranty, easily transported with one truck ~~Price~~~~: $445,000~~ Price Reduced: $375,000

Built 1976, all diesel engines, Toyo pump, main dredge ump and hydraulics completely overhauled, fully operational and ready for inspection, can be disassembled and easily transported on flat bed trucks, 62’ x 24’ x 4’, ladder in 3 sections (total 87’). Main engines Cummins NTA855C 360 overhauled November 2006. Dredge pump Toyo TO-150B, size 10” overhauled May 2007. Auxiliary engine Cummins/07C4, overhauled Nov 2006, alternator installed (2000 watts), (1) Toyo submersible dredge pump model DP150-B, (1) 10” EMCO/Ronan mass flow meter, (1) 3” centrifugal water pump (Berkley), (1) 80’ x 10” flex hose suction pipe, complete set of safety equipment, survey available Price: $249,000

Built 2002, overall dimensions of barge: 195’L x 36’W x 55’H, 72’ dredge ladder, Pekor pump 36” cutterhead, Cummins KT38 (1200 hp) engine, 800 kw continuous generator, 35 kw Caterpillar backup for lights, hydraulics for spuds, and ladder control, 3500 gallon fuel storage, outputs approx 40 ton per hour (Coal)

Built 1968, 44.20m x 10.36m x 33.6m, 628 GRT, galvantized steel hull, 600 ton hopper capacity Available for Charter (Subject to availability)

Built 1947, 170 x 44 x 8, 5’6” draft, EMS 20-645 E4RH engines (900 rpm 3600 hp), 28” x 24” Mobile pulley6, 60,000 gal ful, 40,000 gal water, GE 600 hp @ 648 rpm cutter motor (forced air cooled) Price: $1,025,000

ROSS TAYLOR DREDGE (Ref#134) 12” suction with classifier, 90’ x 30’ x 6’, L40 pump, 12V71 Detroit diesel engine, MG521 reduction gear, 653 Detroit diesel on 75 kw generator, Cat 6 cyl on 50 kw generator Price: $250,000

2 trailing barges, can swing 250’ and dig 34’, Detroit 12V71 diesel engine on pump, plus Detroit 471 on hydraulics Price: $445,000

14” suction, 12” discharge, 38” impeller, new, never used Price: $75,000

12 x 12 x 36” Pearce pump, Cat 3406, 450 hp twin disc, marine gear MG5114, 3:1 ratio, Peerless service water pump, skid mounted, radiator cooled, lifting eyes, muffler, operating gauges and guards, located Texas Call for Price

12 x 10 x 32” Amsco pump, Cat 3406 (375 hp) Tonaco, marine gear 2.5:1, Peerless service water pump, skid mounted, radiator cooled, located Texas Call for Price

8 x 8 x 19-1/2” Morris pump, Cat 3306 230 hp, Cotta reduction gears 1.8:1, skid mounted radiator cooled, lifting eyes, muffler, gauges, guards, located Texas Price: $65,000

Impeller diameter 44”, right hand rotation, Cat D399 1120 hp, radiator cooled, Rejintas Marine Gear ratio 2.407:1, Berkley water pump 3 x 2”, 13-3/4” impeller, on/off switch, suction and discharge pressure gauges, located Tennessee Price: $405,000

VESSELS WANTED

Let us know if you have any vessels, barges, dredges or related equipment for sale.

Keep us in your files for any equipment that may become available in the future.