SUN MACHINERY CORP.

Call: 516-536-7375 /  516-536-7317 fax

rigs@sunmachinery.com

 

    

DIRECTIONAL DRILLS

JUMBO DRILLS

STRAIGHTLINE

 

 

CASE 400TX (Ref#11411c)  Manufactured 1997, 6116 hours, Cummins engine, mounted on a tandem axle trailer   Price: $28,600

 

CASE 400TX (Ref#11411d)  Manufactured 1997, 335 slurry pump and tank, no meter redaing, mounted on a 1975 Gooseneck Flatbed Trailer   Price: $50,600

 

CASE 1500TX  (Ref#1994N)  Manufactured 1997, Izuzu 105 hp diesel engine, track mounted, 500’ rods  Price:  $35,000

 

CASE 200TX  (Ref#4703Nc)  400’ rod  Price:  $19,000

 

CASE 960  (Ref#8837Nb)  Manufactured 2004,  Price:  $50,000

 

DITCH WITCH JT-1720 MACH1  (ref#1943Nj)  Manufactured 2002, after full inspection and repair, comes with full rack of rods, drill head and drill bit, 1023 hours -  Price:  $42,000

 

DITCHWITCH 1720  (Ref#2175N)  trailer mounted, John Deere diesel engine, 900 hours, 500 gallon mud mixing system, new hydraulic pump, new water swivel, new tires, 950 Tracker locating system, 810’ of 10’ rods, good condition  Price:  $74,000

 

DITCHWITCH 1720  (Ref#12589N)  Manufactured 1999, 2400 hours, self-contained unit, diesel engine, jet track, Tracker 750 locating system, 500 gallon mixing system, full rack of rods, 10 ton trailer  Price:  $42,500

 

DITCHWITCH 1720  (Ref#15012d)  Manufactured 1998, self contained, 400’ pipe, 66 tracker, locator system, 86DH Beacon, John Deere diesel engine  Price:  $40,000

 

DITCHWITCH 2720  (Ref#15012a)  Manufactured 1999, self-contained, jet track, 520’ pipe, 750 locator head up display, 86DH Beacon, John Deere diesel engine  Price:  $70,000

 

DITCHWITCH 2720  (Ref#15012b)  Manufactured 1999, self-contained, jet track, 520’ pipe, 750 locator head up display, 86DH Beacon, John Deere diesel engine  Price:  $85,000

 

DITCHWITCH 2720  (Ref#15012c)  Manufactured 1999, self-contained, jet track, 520’ pipe, 750 locator head up display, 86DH Beacon, John Deere diesel engine  Price:  $95,000

 

DITCHWITCH JT2020   (Ref#8066NN)   Manufactured 2008, 724 hours, Cummins 83hp engine, rubber tracks, mud system, tanks, pump, tracker, trailer

Price:  $115,000

 

DITCHWITCH JT-1220  (Ref#74N)  Manufactured 2004, self-contained unit, mounted on tracks, Cummins diesel engine (650 hours), includes tandem axle trailer, 300 gallon mud mixing system, Mach I locating system, good condition  Price:  $95,000

 

DITCHWITCH JT920L (Ref#11039Nb) Manufactured 2000, rubber tracks, auto load with 10’ rods  Price:  $22,000

 

DITCHWITCH JT920L  (Ref#4703Nb)  Manufactured 1999, 3500 hours, 210’ rod  Price:  $22,000

 

DITCHWITCH JT920  (Ref#4703Na)  short mast, approx 3700 hours, 180’ rod  Price:  $20,000

 

DITCHWITCH JT520 (Ref#4215N) Manufactured 2006, jet track, less than 1000 hours, Kubota diesel engine, FT5 mud system, 200 gallon water tank, (2) beacons, (2) drill heads, locating system, 6” Beavertail reamer, 4” Bullet reamer, trailer, 160’ rods, wrenches, etc  Price:  $45,000

 

DITCHWITCH JT520  (Ref#5955N)  Manufactured 2000, mounted on tandem axle trailer, Kubota diesel engine, 780 hours, 250 gal mud, mixing system, 250 gal water tank, locating system, 950 tracker, reamer, tools, beacon, 300’ of 1-1/4” x 5’ rods  Price:  $40,000

 

DITCHWITCH  (Ref#15210)  track mounted, manufactured 1994, 400’ pipe, mud system  Price:  $40,000

 

DITCHWITCH 3500 TRENCHER  (Ref#2228Nc)  diesel engine  Price:  $20,000

 

DITCHWITCH 3610  (Ref#4599N)  Manufactured 1999, Deutz43 hp diesel engine, 4 WD, rear wheel weights, 6 way backfill blade 60”, sprocket boom, new “Shark” chain, front attachment, backhoe and outriggers, 12” buckets

1999 Belshe dovetail trailer with tandem axles and electric brakes  Price:  $28,500

 

DITCHWITCH 3610  (Ref#4583N)  Manufactured 1987, mechanical tractor with Deutz 43 hp diesel engine, 4 wd, front wheel weights and solid tires, 6 way backfill blade, digging attachment, 2 year old “Shark” chain, 2003 Hudson single pivot trailer  Price:  $28,000

 

DITCHWITCH 4010  (Ref#2386N)  Manufactured 1988, mechanical tractor with Deutz 50 hp diesel engine, 4 wd, 6-way backfill blade, center mount and offset rear digging attachment, 70k rock chain and dig boom, front attachment backhoe and outriggers, 24” buckets, 1995 custom dovetail trailer with tandem axles, new electric brakes  Price:  $31,000

 

DITCHWITCH R40 (Ref#7144Nb) Manufactured 1977, mounted on tractor with Ford Industrial gas engine, includes trailer & tools  Price:  $17,500

 

DITWITCH 51X10 TRENCHER  (Ref#3312Ne)  Manufactured 2007, 2200 hours, air cooled diesel engine, 6-way grating blade, carbide rock cutting teeth  Price:  $22,000

 

VERMEER 400SX  (Ref#14650)  Full combo, 255 Sx combo, 3500, 5010, 4010, 7510  Price on Request

 

VERMEER 440A  (Ref#931N)  jet track, Deutz 4 cyl diesel engine, 2 drill heads, 2 66 TKR Beacons, 6” reamer, 380’ of 10’ rods, tools  Price:  $23,500

 

DITCHWITCH 410SX (Ref#233N) Manufactured 2007, only 790 hours, Cat engine  Price:  $25,000

 

VERMEER 75X100 (Ref#2343Nb)  Manufactured 2004, 3500 hours, John Deere dieselengine, 15’ rods, no mixing system  Price:  $245,000

 

VERMEER 50 X 100 (Ref#3435N) Manufactured 1996, self contained unit with Cat engine, drill head, breakaway tongs, 535’ of 15’ x 3 ½” rods  Price:  $90,000

Digitrak locating system available at extra cost

 

VERMEER D16X20 SERIES I (Ref#8006NI) horizontal drill   Price on request

 

VERMEER D16X20A (Ref#8006NK) horizontal drill, 2059 hours  Price: $20,000

 

VERMEER NAVIGATOR D16X20A (Ref#11039Nd) Manufactured 2000, 4 cylinder Perkins diesel engine, 3000 hours, rubber tracks, duel controls, Vermeer ST300 mud mixing system with Honda motor  Price:  $35,000

 

VERMEER 16x20  (Ref#8034N)  Manufactured 2002, drill trailer, mixing system, 400’ drill rod, complete package  Price:  $90,000

 

VERMEER 16X20 (Ref#1943Nc)  Manufactured 2002, manual rod loading,  completely refurbished and repainted, comes with 420’ of rods, drill head, drill bit, ST500 Mixing system mounted on a 18,000 lbs two-axle trailer, Mark IV locating system(used), yellow sonde used, 1450 hours  - Price:  $58,000

 

VERMEER D16X20II (Ref#6408Na)  Manufactured 2008, (2) available, 16,000# pullback, 2000 ft/# torque, 63 HP Kubota 3.6 liter diesel engine, 400' of Firestick drill rod, Dimensions & weights:  16' L x 4' W x 6' H, Weight 10,000#

(1) 320 hours     PRICE: $130,000

(1) 100 hours     PRICE: $139,000

 

VERMEER D16X20A  (Ref#5517N)  Manufactured 2004, 1150 hours, Kubota diesel engine, 400’ of Firestick rods, rod loader, remote lockout, good condition  Price:  $70,000

 

VERMEER 16X20 NAVIGATION BORING UNIT  (Ref#3065Na)  Manufactured 2001, diesel engine, mixing system, (2) locators: 1 brand new Mach III, 1 Mach II upgraded to Mach III, trailer, 400’ of 10’ rods, 1 drill head sone, ready to go  Price:  $60,000

 

VERMEER 16X20 NAVIGATOR  (Ref#10899N)  Manufactured 2000, dual 300 gal water tanks: one is MH mixing system, 18’ Belfhe trailer, Mark III locator package, 300’ stem, head, $10,000 on rebuild including new alignment package  Price:  $80,000

 

VERMEER D16X20A  (Ref#14647)  Manufactured 2000, 2575 hours, 400’ rod, no locator, no mixer, no trailer,  Price:  $50,000

 

VERMEER 16x20A  (Ref#72N)  Manufactured 2000, new Perkins diesel engine (1700 hours), 3 axle ready-haul trailer, 500 gal Vermeer mixing system, full rack of rods, toolboxes, good condition  Price:  $55,000

 

VERMEER 16x20A  (Ref#73N)  Manufactured 2000, new Perkins diesel engine (1700 hours), 3 axle ready-haul trailer, 500 gal Vermeer mixing system, full rack of rods, toolboxes, good condition, needs cosmetic work  Price:  $50,000

 

VERMEER 16 X 20  (Ref#14434Na)  Manufactured 1999,  Price:  $40,000

 

VERMEER 16x20  (Ref#12362)  Manufactured 1998, 700 hours, completely gone through and updated, excellent condition, 440’ rod, reamers, 500 gallon water and aux tank, Mounted on 9 ton trailer (3 axle) Perkins engine  Price:  $65,000

 

VERMEER 16X20  (Ref#10018N)  Manufactured 1997, less than 2000 hours, Perkins diesel engine, self-contained unit, mounted on triple axle trailer, 300 gallon mixing system, Digitrak Mark II locating system, 8” reamer and drill, 340’ of 10’ rods, excellent condition  Price:  $60,000

 

VERMEER D16 X 20A (Ref#3545Nb) 1996 International with mud mixer, Spot D TEKIV tracking system, pullback plugs & reamers, 400’ drill rod, Butler trailer  Price:  $50,000

 

VERMEER 16X20 (Ref#8214N) mud system, full rack of Firestick I rods, no locating system  Price:  $22,000

 

VERMEER 18 X 22 (Ref#13458N) Manufactured 2004, only 3200 hours, 400’ drill stem, includes trailer & mud mixing system   Price:  $35,000

 

VERMEER D18X22 (Ref#9253N) mounted on 1992 Ford L8000, Vermeer DT750 mud mixing system, 2006 Imperial 20 ton air brake trailer, 2000 Vactron 800 gallon with diesel engine, radio detection drill track & remote – 30’ Sonde, McLaughlin Spot Detect IV with remote, reamers & swivels  Package Price:  $85,000

 

VERMEER D24  (Ref#11885N)  Manufactured 1992, one owner rig, only 1200 hours, 6 cyl John Deere diesel engine, trailer mounted, Digitrack Mach III locating system, mixing system, 500’ rod  Price:  $29,500

 

VERMEER 24 X 40 (Ref#5021Na)  only 4300 hours  Price:  $32,500

1995 KENWORTH WATER TRUCK (Ref#5021Nb) 1500 gallon poly tank   Price:  $14,500

VERMEER D7 X 11 (Ref#5021NcPrice:  $14,000

Available at extra cost:  service truck, trailers, etc

 

VERMEER 24X40 SERIES II  (Ref#2255Na)  Manufactured 2006, full rack of rods, drill head, drill bit  Price:  $147,000

 

VERMEER 24X40  (Ref#2343Na)  Manufactured 2000, 3800 hours, John Deere diesel engine, 800’ of 10’ rods, no mixing system  Price:  $80,000

 

VERMEER 24x40  (Ref#8023)  1996, track mounted, self-contained, 600’ of 2-3/8” x 10’ rod, Digitrac locator, 2000 hours, tooling  Price:  $75,000

 

VERMEER 24x40A   (Ref#304Na)  Manufactured 2000, two available, Cummins diesel engine, refurbished, full rackof pipe, (1) 1246 hours, (1) 2426 hours  Price:  $60,000

 

VERMEER 24x40A  (Ref#304Nb)  Manufactured 2000, Cummins diesel engine, drillhead, dirt head, 550’ rod, 3600 hours, excellent condition  Price:  $48,000

 

VERMEER D7X11 SERIES I (Ref#8006NJ) horizontal drill  Price:  $90,000

 

VERMEER 7X11 SERIES II (Ref#1943Nh)  Manufactured 2005, completely refurbished and repainted, comes with full rack of rods, drill head and drill bit, 2519 Hours – Price:  $50,000

 

VERMEER D7 X 11 SERIES II  (Ref#2605N)  Manufactured 2005, 655 hours, 47 hp Kubota diesel engine, Vermeer MX125 with 300 gallon tank, customer 6 ton trailer, McLouaghlin Spot IV locator package, drill rods, drill head  Price:  $69,500

 

VERMEER D7 X 11 SERIES II (Ref#8006Na) Manufactured 2005, only 1200 hours, Kuboat diesel engine  Price:  $48,500

 

VERMEER 7 X 11 SERIES II  (Ref#1952N)  Manufactured 2005, only 1500 hours, full rack of rods  Price on Request

 

VERMEER 33X44 (Ref#1834R)  Manufactured 2000, self contained, Cummins diesel engine, 3500 hours, 600’ drill rod, good condition  Price: $80,000

 

VERMEER D40X40  (Ref#4705Nd)  Manufactured 1999, 1500 hours, 79 gpm pump  Price, rig only:  $70,000

Price with 750’ new Firestick I rod:  $90,000

 

VERMEER 40 X 40 (Ref#871N) Manufactured 1995, locating system, mud mixing system   Price on request

 

VERMEER  10 x 15  (Ref#3585Nb)  Manufactured 1996, 400 hours, self-contained unit, Perkins diesel engine, 300 gallon mud system, Digitrak locating system, 260’ of 10’ rods  Price:  $35,000

 

VERMEER D7 X 11  (Ref#13752N)  Manufactured 2007,   Price:  $90,000

 

VERMEER 7X11 SERIES II (Ref#1943Nh)  Manufactured 2005, completely refurbished and repainted, comes with full rack of rods, drill head and drill bit, 2519 Hours – Price:  $50,000

 

VERMEER 7X11A  (Ref#2255Ne)  Manufactured 2003, 1200 hours, full rack of rods, drill head, drill bit, 4” fluted reamer with built-in swivel, 4” beaver tail reamer with built in swivel, ST300 mud mixing system, new Mark III locating system, new yellow sonde  Price:  $50,000

 

VERMEER D7 X 11  (Ref#9117N)  trailer, locator/navigator, mud system, fully tooled, ready to go, 2 reel trailers, 400’ drill rod, bits, pullers, reamers  Price:  $45,000

 

VERMEER 7X11A  (Ref#1943Ne)  Manufactured 1999, completely refurbished and repainted, comes with full rack of rods, drill head and drill bit, 3261 hours -   Price:  $22,000

 

VERMEER 7X11A (ref#1943Nf) Manufactured 1998, completely refurbished and repainted, comes with full rack of rods, drill head and drill bit, 1359 hours – Price:  $22,000

 

VERMEER 7X11A (ref#1943Ng)  Manufactured 1996, completely refurbished and repainted, comes with full rack of rods, drill head and drill bit, 2177 Hours – Price:  $21,000

 

VERMEER 711  (Ref#13571)  Manufactured 1997, Perkins 4 cyl diesel engine, mounted on Vermeer T16 trailer, 5-1/2 hp mud pump, 300 gal watyer tank, auxiliary tank, 6” reamer, Mark 3 Digitrak locating system, 350’ of 6’ pipe  Price:  $45,000

 

VERMEER 711  (Ref#8290N)  late 1990’s, early 2000’s, rubber tracks, diesel engine, no locating system, no mud system, full set of rods 6’, reamer, no mud pump, 500 gallon water tank, been sitting  Price:  $39,500

 

VERMEER 711A  (Ref#71N)  Manufactured 2000, diesel engine, mounted on 2 axle trailer, 300 gallon mixing system, full rack of rods  Price:  $29,500

 

VERMEER LM42  (Ref#14661)  Manufactured 1999, 59 hours, 24” vibrating plow, 12” excavating bucket, dry bore attachment, no rods, diesel power  Price:  $35,000

 

VERMEER MIXING SYSTEM (Ref#8006NL) model MX 125, trailer mounted  Price:  $20,000

 

TESMEC TRS1100 (Ref#8006Nh) Manufactured 2002, 5774 hours, track drive pump rebuilt with less than 500 hours, new digging chains, new conveyor winch, new conveyor motor  Price:  $395,000

 

AMERICAN AUGER BB50 (Ref#633N) Like new condition, stored inside, skid mounted with Kubota diesel engine, 500 gallon mud mixing system, no locator  Price:  $20,000

 

AMERICAN DD15B  (Ref#10796a)  Approx 1200 – 1500 psc 2-5/16 drill stem, 6” – 20” back reamers, non-metallic drill rod, other misc. heads etc., Contractor Manufacutring Model 3010SS 6059TF001, on Syder hotshot trailer w/GVW 20,000#  Price:  45,000

 

AMERICAN AUGER DD8  (Ref#50Nb)  Manufactured 1980, 1000 hours, John Deere diesel engine, onboard crane, cutterhead, 3000’ rod, some tools  OFF MARKET

 

PREMIER 16 X 20  (Ref#8022b)  Manufactured 1998, has pump reservoir, no bits, Butler 2 axle trailer  Price:  $75,000

 

HORIZONTAL DRILL RIG (Ref#814N) Manufactured late 1970’s – early 1980’s, trailer mounted with 12hp Briggs & Stratton gas engine, mud mixing system, water pump, no rods  Price:  $20,000

 

STRAIGHTLINE DL605 DIRECTIONAL DRILL  (Ref#6041)  Manufactured 1993, 5’ drill rack with trailer, 1060 hrs, Digitrack locator system, (2) directional drill heads, 10,000 lb swivel, 6” cutting head, 4” cutting head, 3” compaction head, 4” compation head, auger stake down system, pin stake down system, mud mixing system, spare sub saver, “Zap Alert” system, 200’ drill stem,  Price:  $50,000

 

SHOP BUILT DIRECTIONAL DRILL (Ref#4330Na) Manufactured 1989, 400000# pullback cable drill unit, hydraulic run by 300hp electric motor, 45000# & 60000# cable winches, 400kw generator & driller’s control cabin mounted on drop deck trailer  Price:  $335,000

 

STRAIGHTLINE 910 HORIZONTAL DRILL  (Ref#6476N)  8200 lbs of thrust/pullback, 1100 ft/lbs of rotary torque, on board fluid pump, 37 hp Hatz diesel engine, 2 carbide tipped stakes, includes basic safety package, rear stakes short pinned, strike alert system, M3A mud mixing and delivery system, 9 hp engine, 27 gpm @ 1000 psi mud pump, hydraulic driven centrifugal mud mixer (Typhoon mud mixer), 3-300 gallon fluid storage tanks, 20 drill pipe 1-7/8” x 10’, tack/hour meter shows 113 hours,   Price:  $29,500

 

DRESSER 7200 RAISE BORE RIG  (Ref#5932Na)  Price:  $400,000

 

DRESSER 4800  (Ref#5932Nc)  needs work  Price:  $125,000

 

DRESSER 300 RAISE BORE RIG  (Ref#5932NbPrice:  $350,000

 

RAISE BORER  (Ref#14305N)  MODEL 25R, complete rig with drill pipe, located England  Price:  £25,500

 

ATLAS COPCO L2C JUMBO DRILL  (Ref#7121N)   Manufactured 2001, approx 8000 engine hours, PP1 (approx 10,500), pps (approx 8500), main bearings replaced in both hydraulic pumps, 2 booms, 1 loading basket, drifter 2 x COP 1838 (overhauled), most of the hydraulic pipes changed, many parts replaced by original Atlas Copco parts, painted April 2008.  Price:  €330,000    (Euros)
 

 
 

Tel:  516-536-7375          Fax:  516-536-7317         rigs@sunmachinery.com