CORE DRILLS FOR SALE
LONGYEAR 44 (Ref#3349Nc)
Extendable bed, angle mast, mounted on single axle truck with hydraulic leveling jack, hydraulically raised mast, injection pump, wireline unit, complete, truck needs work
Price includes rebuilding, cleaning and painting of truck
PRICE: $112,000
LONGYEAR 34 CORE RIG PACKAGE (Ref#5313N)
Manufactured 1976, 2000’ depth capacity, excellent condition, not used in years, mounted on tandem axle 6 wheel drive Military truck with gasoline engine, wireline, 3 pole hydraulically raised mast assembly, can pull 20’ pipe, slide base, rotating head 360 degree, 180 degree angle drilling capability, Ford 300 diesel engine on deck, LL Bean mud pump and mud mixer, tools, 2000’ of BQ (2.19”) x 20’ drill rod, drill bits, (2) core barrels, slips, foot clamp. Has drilled 10 holes to 1,000’ Price: $95,000
AD-1000 (Ref#675N)
underground core rig, 600m drill depth (HQ), 800m drill depth (NQ), driving stem dia 42-50mm, angle range 0 – 360 degrees, spindle speed (rpm): forward 51, 93, 160, 246, 350, 149, 268, 463, 710, 1011. Reverse 57, 164. Spindle innerdia 95mm, spindle torque 5055nm, spindle stroke 600mm, 60 kn max thrust, 80 kn max lifting capacity, hoisting speed (m/s): 0.44, 0.80, 1.38, 2.12, 3.02, lifting capacity of single rope 35 kn, 15mm wire rope dia., 2000 kg drill body weight, 2460mm L x 1150mm W x 1888mm H, Siemens 75 hp electric motor Price: $95,000
SKYE-10 CORE DRILL (Ref#68N) – New, Never Used
Drilling Capacity: BQ 1,300 m, NQ 1,000 m, HQ 700 m, PQ 400 m
Track Pad Width 400 mm, Max Up Hill Angle 30 degrees, Haul Capacity 11 tons, Speed 2 km/hr.
Power Unit: Model Cummins 6BTA, 6cyl.Tier II, Displacement 5.9 L., Power 132KW/2500rpm (177 bhp), water cooled, Type Turbo charged, after cooling
Hydraulic System: Working Pressure 26Mpa (3,750 psi), Cooling Air cooled
Drill Head (Side sliding): Max Torque 8,135NM (6 000ft/lb), Gear Box 2 speed built-in transmission, Inside Diameter PQ size
Ratio: Spindle Speed RPM (depending of hyd motor size and internal gear ratio): 1st 0 – 200, 2nd 0 – 1200
Drill head chuck spring closed, hydraulic open, Max opening: PQ size, Optional Model Acker, Longyear & Boyles
Main winch: Max Pull 6,800 kg. bare drum (15,000 lbs.), Pulling Speed 51m/min (167ft./min), Rope size/Length 6mm/30m (5/8’’X100ft)
Wireline Winch: Power Hydraulic system, Max Pull 1,100kg. bare drum (2,400lbs.), Pulling Speed 120m/min bare drum, (430ft./min), Rope size/Length 6.6mm/1,300m (¼’’/4,265ft.)
Mast: 2 sections, with mast dump, Length/Feed Travel 9m/3,5m.,
Drilling Angle 45 to 90 degrees
Max Push 5,500Kg (12,000 lbs.)
Max Pull 12,000Kg (26,400 lbs.)
Mast Dump 1,4m ( 4,6 ft.)
Foot Clamp: Model Longyear type, Max Rod Size 117mm ( 4 5/8’’)
Drill total weight 10,000kg (22,000 lbs.)
Drill Size 5,382 x 2,300 x 2,600m (17,6’ x 7,54’ X 8,5’)
Made in China and modifications done in Canada – top drive gear type, Acker chuck, Bean 435 water pump
Price: $295,000
SUN 18C CORE DRILL (Ref#68Nb)
Drilling capacity: BQ 6,500’, NQ 5,500’, HQ 3,900’, PQ 2,300’
Power Unit: Cummins 6CTA 8.3L, water cooled, turbocharged, aftercooled, 179 kw (238 hp) 2200 rpm
Hydraulic System: Air cooled, working pressures 28 mpa/4,000 psi
Drill Head: Max torque 5,500mm (4,050 ft/lb), max inside diameter 117mm (4-5/8”), 4-speed gear box 0 – 1200 rpm
Drill Head Chuck: Hydraulic open, spring closed, max inside diameter 4-5/8” PQ
Main Winch: Max pull 13,500 kg (30,000 lbs), low speed 40m/min (130 ‘/min) bare drum, high speed 8 m/min (260 ft/min) bar drum, rope diameter/length: 7/8” 115’
Wire Line Winch: Power hydraulic system, rope diameter/Length ¼” 4,900’, max pull 1,100 kg (2,400 lbs)
Mast: 2 sections, hydraulic powered lift/down with mast dump, standard length 32.75’ (optional 41’), 45 -90 degree drilling angle, max push 6,200kb (13,600 lbs), max pull 18,900 kg (41,500 lbs), 4’ max dump, 11.5’ feed stroke length
Mud Pump: Triplex piston pump, max output volume 320 lpm (90 gpm), max pressure 8 mpa (1,100 psi)
Price: $327,000
SUN 30C CORE DRILL (Ref#68Nc)
Drilling capacity: BQ 9,800’, NQ 7,540’, HQ 5,250’, PQ 3,400’
Power Unit: 8.9L Cummins 6LTAA8.9 water cooled, turbo charged, aftercooled, power 242kw/325hp – 2,200 rpm
Hydraulic system: Air cooled, 28mpa/4,000 psk working pressure
Drill head: Max torque 7,600mm (5,600 lb ft), max inside diameter 117mm (4-5/8”), 4 speed gear box 0-1300 rpm
Drill head chuck: Max inside diameter 4-5/8” / PQ
Main winch: 18,144kg (40,000#) max pull, 198 ft/min low speed (bare drum), 203 ft/min high speed (bare drum), rope diameter/length 15-1/6” – 132’
Wire line winch: rope diameter/length: ¼” – 9,800’, max pull 1,400 kb - 3,100 lbs.
Mast: automatic lift/down system 8’ adjustable, 13m (42.5’) length, 45-90 degrees drilling angle, max push 11,000 kg (24,200 lbs), max pull 23,000 kg (50,600 lbs), 4’ max dump, 11.5’ feed stroke length, 30’ pulling length
Triplex pIston mud pump, max output volume 300 lpm (80 gpm), pressure 12 mpa (1700 psi)
Price: $426,000
CS1000 P4 (Ref#13Na)
main hoist 9,000 lbs., wireline 2500 lbs/3,200 ft of 3/16”, Cummins 6BTA 5.9 ltr 4 cylinder diesel (210 hp_, 6’ feed travel, 13,300 lbs. thrust, 20,000 lbs. pull, 45 – 90 degree drill angle, 20’ rod pull length, drillhead and spindle speeds, hydraulic motor – variable speed/reverse, final drive 4” HV chain drive in oil bath – 2.5 ratio, 4-5/8” spindle, range selection: manual control from operators station, hinged head: swing away. Chuck assembly hydraulic open type, spring closed, max inside diameter 4-5/8”, holding capacity 40,000 lbs., 532 Bean pump, mounted on Dodge 6 x 6 engine, Cummins engine, capacities: 900m BQ, 700m NQ, 450m HQ, 200m PQ Price: $250,000
LONGYEAR 38 (Ref#12N)
Single axle truck with dual wheel tires with 6 cylinder engine
Rear leveling jacks
Work platform
John Deer 115hp engine
FMC 535 water injection pump
.7 Meter Stroke
Depth Capacity
BQ rod: 725m
NQ rod: 525m
HQ rod: 250m
Currently drilling in Mexico
PRICE: $75,000
Longyear 44 (Ref#3349Na)
Rotary head is a Longyear 44, rest of rig is a Longyear 38
Wisconsin 4 cylinder air cooled engine, hydraulic chuck, hydraulic slide base, SPT cathead, main winch, wireline winch, mast assembly & skid mounted
PRICE: $67,500
Longyear Bk-81 (Ref#3349Nb)
1992, Powered by Cummins 5.9 turbo diesel cathead, slide base- side-to-side and in & out, 3L6 Moyno pump, 3 speed FMC/BEAN 435 Corning pump, fully automatic SPT Hammer. Cathead, 3 hydraulic jacks, Hydraulic breakout wrench, Longyear hydraulic chuck, 5000 lb & 8500 lb tool hoists, wireline fast hoist, new rebuilt transmission
Mounted on 1982 international Tandem truck: powered by DT466 international diesel engine, front bumper winch, new tires all around, truck and rig in very good condition
PRICE: $125,000
Longyear 44 (Ref#3349Nc)
Extendable bed, angle mast, mounted on single axel, truck with hydraulic leveling jack, hydraulically raised mast, injection pump, wireline unit, complete
PRICE: $125,000
Longyear Core Rig (Ref#3349Nd)
Model 38, with Cummins Diesel engine, HQ 3 ½ inch drill head with fluted kelly bowl and kelly hydraulic chuck, manual chuck main winch, wireless winch, cathead, SPT Winch Mast assembly & rig skid sled with hydraulic base PRICE: $67,500
LONGYEAR 44 (Ref#3549N)
Pulling 9 meter drill rod, 120 hp deutz air cooler diesel engine, 2 cylinder 35 hp deutz air cooler diesel engine on mud pump, NQ+HQ Automatic head , New GEMCO model crawler steel track, 45 degree angle drilling mast, hydraulic mud mixer, New 800 meter wireline, lighting systems, 16 mm special line
PRICE: $ 165,000 - will deliver to Istanbul port.
LONGYEAR HC-150 CORE RIG (Ref#48N)
Manufactured 1980’s, Capacity: 1500 – 2000’ NQ, 1000 – 1500 HQ
High Speed, hydrostatic head, HQ hydraulic chuck, 353 Detroit diesel engine, deep hole core drill, skid mounted, 25’ angle mast, 2 winches Price: $75,000
MD3 CORE RIG (Ref#357N)
Depth capacity 800 meters with NQ rod, mounted on 6m x 2.4m subbase, Deutz 913 turbo diesel engine, mast Price: $105,000
LONGYEAR 38 CORE RIG (Ref#8582Na)
Manufactured 1984, rebuilt, 24” drill stroke, 12 HH drill head, 353 GM diesel engine, drill chack, heavy duty skid mount, hydraulic push out 12’ to work, pull in to 8’6” to haul, oilfield furnace, hydraulic 420 GMC water pump, water and mud tank, mud mixer, working area 12’ wide x 16’ long, new wire line. Rebuilt items: new clutch parts, new transmission, new brake bands, hydraulics are changed out, heavier pumps and oil transfer tanks, water cooling system, wire line new hydraulic motor complete with drum, safety guard Price: $170,000
BOYLES 25A CORE RIG (Ref#8582Nb)
Completely rebuilt, capacity 3,000’ BQ rod, skid mounted drill, 12HH drill head, 4 key way, 32’ stroke, 420 FMC water pump, new wireline mounted on tower, GMC 353 diesel engine, fold out shack, 12’ folded out, 8’6” retracted. Work done: 5 gear chain new gear and bearings, new clutch and heavy pressure plate installed, new hydraulic pumps and oil tank, new valve banks, rebuilt water pump Price: $165,000
LONGYEAR HC158 DIAMOND DRILL (Ref#2236N)
1,000’ depth capacity with NQ rod, 53’ mast, dual axle trailer mounted, rebuilt Detroit 353 engine, no mud pump Price: $80,000
Sun Machinery Corp.