CABLE TOOL RIGS

 

 

BUCYRUS ERIE 60L(Ref#11265Ra)

 

 

trailer mounted, Isuzu 6 cylinder diesel engine, lots of tooling & bits 

 

Price: $37,500

BUCYRUS ERIE 60L  (Ref#3308N) 

     

Manufactured 1958, 3 lines, Waukesha 6 cyl propane, mounted on trailer, 1800’ of Ύ” drill line, 4300’ 7/16” sandline, new tires, 46’ mast, no tools, currently drilling  Price:  $55,000

BUCYRUS ERIE 60L  (Ref#5822N) 

Perkins diesel deck engine, mounted on 1978 GMC 6500 tandem axle truck with 427 V8 engine, new tires, new paint, 2 rear manual outriggers, 2500’ of Ύ” drill line, 350’ of Ύ” pull line, 2500’ of new 3/8” sandline, tooling:  2” tubing elevators, new bowl and slips, jars, rod elevators, 7” drill bits, 7” casing elevators and tools, 3” casing elevator, casing struts  good condition 

Price:  $65,000 - Kentucky

BUCYRUS ERIE 60L (Ref#5265Na)

Manufactured 1964, diesel engine, mounted on 1969 R Model Mack with 236 Mack diesel engine, 3 line machine, casing strut, 2500’ of brand new Ύ” drill line, 2500’ of brand new ½” sandline, excellent condition, currently drilling, no tools available  Price:  $85,000   Ohio

BUCYRUS ERIE 60L  (Ref#4530N) 

Deutz 5 cyl disel engine, casing strut, 40,000# blocks, mounted on 2-1/2 ton military truck, 800’ of new 7/8” drill line cable, 1300’ of new 7/16 sandline, loads of tools 6” – 8”, rig only drilled 15 wells since new 

Price:  $70,000 - Florida

BUCYRUS ERIE 60L  (Ref#5822N) 

Perkins diesel deck engine, mounted on 1978 GMC 6500 tandem axle truck with 427 V8 engine, new tires, new paint, 2 rear manual outriggers, 2500’ of Ύ” drill line, 350’ of Ύ” pull line, 2500’ of new 3/8” sandline, tooling:  2” tubing elevators, new bowl and slips, jars, rod elevators, 7” drill bits, 7” casing elevators and tools, 3” casing elevator, casing struts  good condition  Price:  $65,000 - Kentucky

BUCYRUS ERIE 60L  (Ref#13433) 

 

trailer mounted, tons of tools, Chrysler V8 Industrial propane engine, bullreel, sandline, casing line  Price:  $45,000 – Idaho

BUCYRUS ERIE 48L  (Ref#15173) 

late 1950’s model, 6000’ drilling capacity, 7000’ service capacity, Cummins diesel deck engine, mounted on tandem axle trailer, tripod super heavy duty derrick, 300,000# casing load, some tools, stacked, needs to be cleaned and painted 

Price:  $110,000  PRICE REDUCED:  $95,000 - Pennsylvania

 

BUCYRUS ERIE 36L (Ref#15424)

Manufactured 1964, single axle trailer mounted with 250 Cummins engine, 3 line machine, rebuilt jack shaft, 54’ mast, good condition  

 

Price:  $60,000  - Canada

6” 8” & 10” tools available at extra cost

BUCYRUS ERIE 36L (Ref#5265Nb)

Trailer mounted, Waukesha gas engine, 50’ mast, 3 line machine, all tools 4” to 6”, no leveling jacks   Price:  $60,000     Ohio

BUCYRUS ERIE 29T  (Ref#780N)  trailer mounted, International gas engine, converted to 3 line machine, some tools, bits, stems, perforators, water tanks, fuel tanks - Nevada

Bucyrus Erie 24L (for parts)

Package price:  $45,000

BUCYRUS ERIE 28L  (Ref#6997) 

  

Manufactured 1960's, Bradford special mast, trailer mounted, needs sandline, Waukesha engine, rebuilt motor,   Price:  $32,500 - Pennsylvania

 BUCYRUS ERIE 28L  (Ref#13437N) 

Trailer mounted, some tools,  Price:  $70,000 - Idaho

BUCYRUS ERIE 28L  (Ref#9542) 

triple drum, powered by Waukesha engine (missing radiator), 6 line blocks, new 2,500’ drill line, new 2,500’ sandline, casing strut, trailer mounted  Price:  $35,000 - Oklahoma

BUCYRUS ERIE 28L (Ref#8706Nb)

Cat 4 cylinder diesel deck engine, mounted on 1970’s Ford with 351 gas engine, 6 line machine, 2000’ of new 7/8” drill line, 2000’ of new 9/16” bailer line, 1 front & 2 rear hydraulic leveling jacks, no tools available 

Price:  $50,000   Arizona

BUCYRUS ERIE 28L COMBINATION ROTARY AND COMPLETION RIG  (Ref#1059N) 

 

Drawworks with spudding beams, 12” Brewster rotary table, 1974 tri axlw all wheel drive with 6V53 Detroit, 180 Cummins deck engine, mechanical clutches, no pulldown, breakout tons, 4-1/2” x 38’ kelly, 7 slim hole collars 5” x 25’, 1500’ of 2-7/8” drill pipe, pipe trailer

Price:  $65,000

BUCYRUS ERIE 27 (Ref#2577Na)

Cummins 4BT deck engine, only 700 hours, mounted on 1979 GMC with 427 gas engine, 3 line machine, sand bucket, some tools, 1 joint of 22’ drill stem, no leveling jacks  Price:  $24,500 - Missouri

BUCYRUS ERIE 27T  (Ref#9692) 

Heavy duty rig, un-mounted, Ford diesel deck engine, 3 line machine, some tools available, sitting several years  Price:  $15,000 – North Dakota

BUCYRUS ERIE 24L  (Ref#9183) 

Ford Industrial 6 cylinder engine, mounted on 1978 Ford 900 truck with gas engine, automatic transmission, hydraulic jacks front and rear, winchline, 2 lines, catheads, no tools  Price:  $35,500 – Ontario

 

BUCYRUS ERIE 24L  (Ref#3305N)

 

 

Mounted on GMC with twin diesel screw engine,  John Deere diesel on deck,  1000’ drill line, 2 rear leveling jacks, reinforced derrick (top & bottom).

Price:  $40,000 

tooling available at extra cost

 

BUCYRUS ERIE 24L (Ref#7003N) 

4 cylinder Perkins diesel deck engine, mounted on late 1960’s International tandem axle with Red Diamond gas engine, new winch line, 1800’ of new Ύ” drill line, 1800’ of new ½” sandline, 1 front & 2 rear screw jacks, tooled up for 4”, new hydraulics, new clutches, tubing power tongs, all gears good condition, currently drilling 

Price:  $50,000 - Ohio

BUCYRUS ERIE 24L (Ref#8351Nb)

trailer mounted with diesel engine, 3 line machine, tools available 5” up to 20”  Price:  $32,500 - Arizona

BUCYRUS ERIE 24L  (Ref#3314N) 

Trailer mounted, 4 cyl diesel engine (rebuilt), 2 line machine, 4” – 12” tools, good condition 

Price:  $45,500 - Wisconsin

BUCYRUS ERIE 24W  (Ref#1252Nb) 

Gas deck engine, mounted on 1970 International w/gas engine, 3 line machine, 4 mechanical jacks  Price:  $29,000 – Connecticut

 BUCYRUS ERIE 22W  (Ref#3922N) 

 

 

Mounted on 1987 Ford 800 truck with 429 engine in truck, with air brakes, 91,000 miles, 2-speed rear end with lock, new Duetz diesel motor in drilling rig – Dorx Motor, 1,000’ of new drilling line, 1,000’ of new sand line, 7’ x 7’ platform built on drilling rig. Miller welder with 150’ lines

Price for rig only:  $45,000 - Ohio

 

Tools available at additional cost:

New stem

New rope socket 5” stinger

Bailer 5”  drive clamps

Latch jack 5”

5” long stroke jars and 5” regular jars

Friction socket

10” bit, 8” bits, 5” bits

2 prong spear

Bumper 5”

5” wrench set

New Jack shaft

New front tire

Wireline knife

Package Price:  $44,000

 

BUCYRUS ERIE 22W SERIES II (Ref#10266Na) 

3 line machine, mounted on 1987 International truck with gas engine, new brakes in Feb 07, Perkins diesel 85 hp deck engine, 4 manual leveling jacks, 6” tools. 

Price:  $23,000 – Pennsylvania

BUCYRUS ERIE 22W  (Ref#11984) 

3-line, International 4 cyl gas deck engine, mounted on 1972 GMC single axle truck w/V-8 350 hp motor, good condition, currently drilling, lots of tools 

Price:  $32,000 - Arkansas

BUCYRUS ERIE 22W (Ref#7041Na)

Deutz diesel deck engine, mounted on 1973 Brockway tandem axle truck with 318 Detroit engine, 3 line machine, Ύ” drill line, ½” casing line, 3/8” bailer line, no leveling jacks, good rubber 

Price:  $29,500 – New York

BUCYRUS ERIE 22W COMBINATION CABLE TOOL/TOP HEAD  (Ref#392Na) 

Mounted on gooseneck trailer, 3 cylinder Deutz diesel engine (1000 hours since rebuild), top head rotary Sullair 750/150 air compressor, uses 3-1/2 x 10’ rods  Price:  $42,500 - Arizona

Also available 450/100 Gardner Denver compressor at extra cost.

BUCYRUS ERIE 22W  (Ref#3727N) 

4 cyl Waukesha deck engine, mounted on 1969 Dodge cabover with 318 Chrysler gas engine, 6” and 8” drills, 5” x 17’ bailer, portable welder/gen., 200 gal water tank on wheels, good condition 

Price:  $22,500 - Pennsylvania

BUCYRUS ERIE 22W  (Ref#573N) 

4 cylinder Onan/Cummins diesel deck engine (low hours), 3 line machine, approximately 400’ of Ύ” drill line, 3/8” sand line and 150’ no twist casing line, rope socket, 4-1/2” x 16’ drill stem, short stroke jars, button bit, breakout wrenches, drive clamps, mounted on 1954 GMC 6x6 army truck  Price:  $25,000 – New York

BUCYRUS ERIE 22W (Ref#5131N) 

Combination rotary rig, (2) deck engines (V60 Wisconsin & 6 cylinder Hercules) mounted on 1952 GMC 6x6 2 ½ ton military truck with 302 gas engine, rebuilt 2x3 Mission mud pump, 3 line machine, set up for 6”, some tools   Price:  $45,000 -  Michigan

BUCYRUS ERIE 22W ( Ref#8182N)

Rebuilt Red Seal Continental gas deck engine, mounted on 1998 International with DT466 engine, 3 line machine, 3 bailers, j wrenches, elevators, new bit, new stem, running rig, ready to go  Price:  $37,000 -  Pennsylvania

 BUCYRUS ERIE 22W (Ref#3134N)

Buda gas deck engine, 3 line machine, mounted on 1976 Ford F700 (not 4x4) with gas engine, 1 stem, rope socket, 2 rear screw jacks, no tools  Price:  $27,500 - South Dakota

BUCYRUS ERIE 22W  (Ref#5129Na) 

Mounted on 1989 Chevy truck, 3 line machine, fresh Continental power unit, 3 hydraulic leveling jacks, fresh paint, fully tooled  Price:  $40,000 - Indiana

BUCYRUS ERIE 22W (Ref#13987N)

Ford 4 cylinder industrial gas deck engine, mounted on 1976 White with Cummins diesel engine, 3 line machine, fully tooled up for 6”, jars, sockets, bits, etc, many spare, 3 hydraulic leveling jacks, running rig  Price:  $35,000 -  New York

BUCYRUS ERIE 22W (Ref#2601N)

4 cylinder Waukesha gas deck engine, mounted on 1979 Ford F700 (not 4x4) with 370 gas engine, 3 line machine, running rig, auto braces, tooled up for 5” (some 4” tools avail)  Price:  $29,500 - West Virginia

BUCYRUS ERIE 22W  (Ref#2643Na) 

Manufactured 1980, diesel deck engine, 3 lines, mounted on International with diesel engine, hydraulic derrick, hydraulic jacks, 20,000 miles on truck, no tooling  Price:  $37,500 – Pennsylvania

BUCYRUS ERIE 22W SERIES III  (Ref#1807Nc) 

Mounted on 1990 International with diesel engine, gas deck engine, 3 lines, fully tooled, 800’ of cable, 600’ of Ύ” drill line, bailer, rope socket, good running condition  Price:  $29,500 – New York

BUCYRUS ERIE 22W  (Ref#1421N) 

 

 

Late model series I,  40' derrick, 3 line machine, Hercules 2300 gas deck engine, mounted on 1984 Chevy Kodiak truck with Cat 3208 engine, 5 x 2 transmission, air brakes, casing winch, 600' drill cable, 5 leveling jacks, includes tools needed to drill (rope socket, drill stem, bailer) currently drilling, very good condition 

Price:  $29,500

PRICE REDUCED: $24,500 - New York

BUCYRUS ERIE 22W  (Ref#4797N) 

Manufactured 1956, Hercules deck engine, mounted on 1978 Ford F700 truck with 370 gas engine, air brakes, 3 lines (new), 100’ casing line, 500’ drilling line, 500’ sandline, tooled for 6”  Price:  $19,500 – Wisconsin

BUCYRUS ERIE 22W  (Ref#14714) 

Mounted on 1968 International truck, wrenches, leveling jacks, drill socket, 21 stem  Price:  $35,000 - Missouri

BUCYRUS ERIE 22W  (Ref#11345N) 

Manufactured 1962, mounted on International truck, powered by Hercules engine, 3 line machine, 600’ , new bailer, fully gone through, great condition  Price:  $55,000   tools at extra cost – New York

BUCYRUS ERIE 20W  (Ref#7173N) 

3 line machine, Red Seal gas deck engine, mounted on 1981 Chevrolet single axle 350 Chevy truck with gas engine, some tools, drill bar, rope socket, subs, new bailer, wrenches, 4 hyd jacks, 36’ mast, completely rebuilt  Price:  $50,000 - Connecticut

BUCYRUS ERIE 20W (Ref#6132N) 

 

Rebuilt Ford 4 cylinder deck engine, mounted on 1987 Chevy with turbo diesel engine, 3 line machine, 300’ of 5/8” cable, (2) new bits, bailer, Hobart welder & generator, cutting torches, 2 rear mechanical jacks, tooled up for 4”, extra 500’ of brand new 5/8” cable   Price:  $32,000

PRICE REDUCED:  $29,500  - LOCATED FLORIDA

BUCYRUS ERIE 20W (Ref#8009N)

Ford 4 cylinder gas deck engine, mounted on 1974 International 1800 with 345 gas engine, 3 line machine, 4” 6” & 8” tools, 2 rear mechanical leveling jacks  Price:  $20,000 - Minnesota

BUCYRUS ERIE 20W (Ref#5724N)

Manufactured 1979, White gas deck engine, mounted on 1964 Chevy with V8 gas engine, 3 line machine, cathead, tooled up for 4” 5” & 6”, 2 rear manual jacks, stored inside  Price:  $39,500 -  Florida

 

WALKER-NEER S-43 CABLE TOOL RIG (Ref#3145N) with extensive tools.

 

 

Depth capacity 8” hole, 3500’, completely rebuilt, mounted on tandem axle trailer with rebuilt screw joints, Waukesha 4-71 engine (120 hours), bull reel - 10 Ύ” x 34” x 46” w/5000’ of new drill line, sand reel – 10 Ύ” x 44 7/8” x 32” w/ 6500’ of good 9/16” line, telescoping 8 5/8” x 7” x 60’ double mast pole, spudding beam, disc type shock absorber

Tools:

(110) drills – 2” – 8 Ύ” diameter

(15) jars

(8) drill stems

(12) reemers

60 – 80 fishing tools

(40) cable tool wrenches

(2) pallets of assorted tool, jacks, etc.

(1) totally rebuilt 4 Ό” sand pump w/new chisel and assembly

(8) 3” – 8” bailer

(1) mud plug mixing pot

(12) new oak foundation boards w/new jack stands.

PRICE: $150,000  PRICE REDUCED:  $90,000

 

WALKER-NEER S33A  (Ref#6717R) 

skid mounted, double pole, triple drum, 145 Waukesha engine, completely rebuilt 1981, air clutches, (2) catheads 

Price rig only:  $75,000

Rig with doghouse and 5” 10" 17” tools  $85,000

WALKER-NEER S32  (Ref#4369N) 

 trailer mounted, pulled by 6 x 6 Army truck with tires chains, HD winch, double pole, 2500’ of new 7/8 drill line, all tools, stems, jars, bits, etc., casing tools 4”, 5”, 7”, 8” and 10”, Waukesha gas/natural gas, working rig, good condition 

Price:  $140,000  Reduced Price:  $45,000 - Ohio

WALKER NEER S32 (Ref#651N)

Manufactured 1963, trailer mounted with 371 Detroit engine, 4 line machine, fully tooled 3” up to 26”, running now  Price:  $70,000  PRICE REDUCED:  $55,000 - Idaho

WALKER NEER 32 SPECIAL  (Ref#1923N) 

Manufactured 1953, 140 Waukeshaw engine, mounted on dobule axle trailer, 2 lines (drill line, sand line), double pole, friction clutches, some 4-1/2” tools included  Price:  $60,000

WALKER NEER S32 (Ref#14081N)

trailer mounted with Detroit diesel engine, 3 line machine, tooled up for 10”  Price:  $65,000 - Arizona

WALKER NEER WS-31  (Ref#743N) 

propane deck engine, mounted on 1963 Chevy tandem axle truck with gas engine, walking beams rebuilt, fully tooled 5” up to 12”, bits, bailers, etc, operating condition  Price:  $29,000 - Idaho

WALKER-NEER WS31  (Ref#6443Nb) 

Trailer mounted, Continental Red Seal gas/propane engine, rebuilt, 2 rear mechanical jacks, no tools 

Price:  $40,000 – Arizona

WALKER-NEER WS31  (Ref#6443Nc) 

Ford 300 Industrial gas/propane deck engine, mounted on Ford 8000 with Cat engine, 2 rear mechanical jacks, no tools  Price:  $40,000 - Arizona

WALKER-NEER WS-31  (Ref#12488) 

Weighted double pitman walking beam, Ύ” line, 6 hydraulic jacks, 40” stroke, 2 part casing line or use hydraulic winch, 50’ derrick, 18 shocks, elevator to about 25’, 220 cubic in Hercules diesel deck engine, 4 speed trans., new 5V power belt, mounted on 1973 International 345 cu V8 gas engine new or rebuilt, new tires, power steering, air brakes, new 5” tools 30’ overall with button bit and mixing bar.  Price:  $100,000 - Michigan

CYCLONE 42 (Ref#3338R)

4 cylinder Continental gas/propane deck engine, mounted on 1979 Ford F800 (not 4x4) with gas engine, telescoping mast, 3 line machine, fully tooled, ready to go  Price:  $25,000 – Pennsylvania

ALTEN 32A  (Ref#12490) 

next heavier than 22W, new jack shaft, drill gear, clutches with ball throw out bearings, 4 hydraulic jacks, weighted walking beam platform for driller, 52’ derrick with 22 Walker-Neer shocks, 2 part casing line, elevator, 4 cyl Ford D172 rig engine with 4 sp transmission, new 7V power belt, mounted on 1970 6x6 multi-fuel truck,  new 30’ 5” tools with button bit and mixing bar, 20’ 4” bailer (dart)  Price:  $80,000 - Michigan

ALTEN 24-A (Ref#12489) 

Similar to 22W, mechanically perfect, main gear has always been covered, shows little to no wear, main shaft, twin disc clutches, roller main bearing, ball throw out bearings, 52’ derrick with 20 new 20W shocks, pulleys all anti-friction, derrick tips up by hydraulic, elevator to about 25’, 162 in Continental with 4 sp transmission, new 5 v 1 piece power belt, main big pulley has added weight for fly wheel drilling effect, walking beam weighted, mounted on 1978 International truck with 537 cu V8 engine, new carb, dist, and valve job, new tires, 10 sp Road Ranger transmission, air brakes, power steering, new tools 30’ overall with button bit and mixing bar, 20’ dart dialer (4” wells), driller’s platform 

Price:  $85,000   PRICE REDUCED: $59,000 - Michigan

SPEEDSTAR 71   (Ref#2675N) 

 

1943, completely rebuilt, 3 cylinder Deutz diesel deck engine, oversized bull gear shaft with custom bearings, mounted on 1976 GMC with 366 gas engine, 3 line machine, hydraulic winch, 40’ hydraulic raised mast, hydraulic breakout cylinder, drillers platform, 3 hydraulic leveling jacks, bailers, subs, pipe, all tools, complete and ready to go 

Price:  $35,000 - Maine

KEYSTONE 50 (Ref#3523Rb) Manufactured 1950’s, rebuilt 6 cylinder Continental gas deck engine, mounted on 1972 Mack R600 tandem axle truck with diesel engine, 2 line machine, 3 hydraulic leveling jacks, tooled up for 6”, good condition, ready to go  Price:  $27,500 - New York

 

 

Sun Machinery Corp.

P.O. Box 482, Oceanside, New York 11572, USA
Tel: 516-536-7375         Fax: 516-536-7317         

E-mail:   rigs@sunmachinery.com
Contact US