BUCKET RIGS FOR SALE
CALWELD 175 (Ref#12678Ra)
Manufactured 1966, 45” ring gear, 4 scope 25’ kelly bar (3” inner), 100’ drill depth, 70B hoist, hydraulic dump arm, back dump/push out in derrick, crowd, 345 International gas V8 deck engine with Allison auto transmission, 4 hydraulic outriggers, mounted on 1975 International 6 x 6 with Cat 3208 diesel (5,000 miles on engine), Allison 6 speed transmission Price: $55,000
EZ-BORE 90-42 (Ref#14608R)
Manufactured 1981, 90’ triple kelly 3-1/4” inner bar, 42” ring gear, 318 Chrysler gas deck engine, mounted on 1990 Kenworth 400 Cat diesel, Eaton 13 speed transmission
Price: $95,000
EARTHDRILL 36M (Ref#12678Rb)
Manufactured 1968, 45” ring gear, 3 scope 25’ kelly bar (3” inner), 75’ drill depth, hydraulic dump arm, back dump/push out in derrick, crowd, 6 cylinder International gas deck motor with 4 speed transmission, 4 hydraulic outriggers Price: $50,000
Can be mounted on 1980’s Mack truck with Cummins engine and 13 speed transmission for additional $10,000
GUS PECH 42” BUCKET RIG (Ref#11946R)
Rig has just over 3000 hours, 4 scope x 25’ kelly bar, newer drill line and calf rail, mounted on 1967 Ford F600 Series Tula truck 6 x 6, 28,000 miles, 360 cube gas engine, Spicer 5 speed manual transmission with transfer case, 3 hydraulic jacks, hydraulic scoped outriggers and tower hoise cylinders, 300 cube Ford Industrial engine on deck, 4 speed lo hole Ford transmission. Newer drive V belts, several bearings, bushing and hydraulic hoses have been replaced.
Price: $40,000
EARTHDRILL LH45 (Ref#9272N)
Manufactured 1977,
mounted on 1993 Mack truck, Stauffer transmission, 85’ 4-1/4” Kelly, 24” core
barrel, 24” bucket, 4-1/4” inner Kelly, 10” outer Kelly, 85’ drill depth, 466
Industrial deck engine, many extra parts, excellent shape Price:
$160,000 PRICE REDUCED: $105,000
EZ-BORE 100-42 (Ref#13675N)
Manufactured 1980, new Kelly quad 25’ (100’ depth), (4” stub), rebuilt Detroit 453 Diesel deck engine, rebuilt Allison auto transmission, 42” ring gear, 2 rear outrigger jacks, 1 front jack, hyd Kelly pulldow, hyd Kelly pushout, 3 hyd swing arm cylinders, lots of new parts on rig, mounted on 1980 Mack RD68657600 truck, 285 hp Mack engine, 144” cab to axle, maxi torque X107 5 speed hi-low transmission, tires 11R22.5, very good shape budd wheels Price: $95,000
CALWELD 52 LHD HYDRAULIC DRILL RIG (Ref#2607N)
Manufactured 1985, mounted on 1985 GMC truck with Cat 3208 diesel engine, 13 speed transmission, pusher axle, extra H.D. oil cooler, rear derrick hydraulic push-out, 4 hydraulic outriggers, hydraulic crowd assembly, quad kelly 4” x 120’ digging depth, 40’ hydraulic folding hinged derrick with cable roller and 20” sheaves, 23,000# winch, 52” ID ring gear, side hydrauilic pushout arm, DT466 diesel engine, 48” heavy duty drill bucket, well maintained, ready to work Price: $175,000
CALWELD 250A (Ref#8792N)
Manufactured 1960’s, 413 Chrysler gas/propane deck engine, mounted on 1984 Osh Kosh 6x6 with 250hp Cummins diesel engine, 42” ring gear, 90’ telescoping Kelly, hydraulic swing out dump arm, 30” bucket Price: $90,000
CALWELD 150 DRILL RIG PACKAGE (Ref#12465N)
36” ring gear, mounted on truck with 350 Chevy gas engine, 66’ Kelly bar, 6 cylinder Chrysler deck engine.
Also includes the following extra accessories:
(1) Tower, (1) 36” ring gear, (1) 44’ Kelly bar, (1) 10’ extension, (1) yoke, (1) pulling arm, (1) winch, (2) 3’ buckets, (1) 30” bucket, (1) 18” bucket, (1) 24” bucket, (1) 3’ core bucket, (1) 2’ core bucket, (1) 1’ core bucket and extensions for 4’ – 7’ diameter holes Price: $35,000
CALWELD 150 (Ref#706Na)
Manufactured 1970’s, mounted on 1974 International tandem axle truck, 6 cylinder Chrystler gas engine, 42” ring gear, hydraulic swing out arm, hydraulic swingout arm, 24” triple kelly, 70’+ drill depth, 24”, 28” and 16” buckets with extensions, 24” auger, 1 front and 2 rear jacks, running condition Price: $30,000
CALWELD 150 (Ref#15488)
Manufactured 1970, 292 Chevy 6 cylinder gas engine on deck, mechanical side dumping arm, mounted on single axle 1970 Chevy with 366 Chevy engine, 14’ wheelbase for difficult to access areas, 2 hydraulic outriggers, 42” diameter, 69’ – 72’ drill depth, complete with 24”, 30” and 36” buckets Price: $47,500
CALWELD 150 BUCKET RIG (Ref#13476N)
42” ring gear, 2 piece kelly, 40’ length, 6 cylinder Chevy gas deck engine, mounted on Chevy truck Price: $21,500
GUS PECH SUPER GEORGE BORING RIG (Ref#12866N)
Manufactured 1977, new 3208 Cat deck engine with only 1200 hours, mounted on 1977 Chevy tandem axle with gas engine, 51” ring gear, extended mast with kickout arm on tower, 30’ Kelly with hydraulic pulldown, 4 hydraulic leveling jacks, fully tooled Price: $170,000
GUS PECH H48 SUPER GEORGE (Ref#1473Na)
Manufactured 1986, 48” ring gear, 100’ drill depth, Cat 3208 on deck, hydraulic pushout, 1986 Ford 8000 truck, Cat 3208, Eaton Fuller 10 speed transmission,
main winch, aux winch, 1 front jack, 2 rear jacks, 35’ derrick Price:
$140,000 PRICE REDUCED: $100,000
GUS PECH H48 SUPER GEORGE (Ref#1473Nb)
Manufactured 1978, 350 Cat engine with Eaton Fuller transmission, mounted on 1993 Ford L9000, 264,840 miles, 3208 Cat deck engine, 2 rear outriggers withjacks, 1 front jack, 100’ 4-part kelly, 48” rotary open, excellent condition Price: $120,000
GUS PECH SUPER GEORGE H48 (Ref#5348N)
Mounted on 1979 Ford F800 4x4 truck with 390 gas engine, 3 hyd leveling jacks, Industrial Ford gas deck engine, telescoping kelly, hydraulic winch, extra equipment with rig, 40,000 miles, very good condition, ready to drill Price: $100,000
GUS PECH G48 (Ref#40N)
Manufactured 1976, 391 Ford Industrial on deck, mounted on C65 Chevy with 366 gas engine, hydraulic, 100’ kelly, 48” turntable, pulldowns (last used 5 years ago), 45” dirt bucket, 33” dirt bucket, 36” tile slitter, good condition Price: $100,000
GUS PECH BORING MACHINE (Ref#1251N)
Mounted on 1996 International truck, new paint, 36” ring gear, 24” bucket and bell, complete, ready to go Price: $38,000
GUS PECH (Ref#8399N)
Manufactured 1973, gas deck engine, mounted on 1978 GMC with gas engine
Available as package with 1984 Ford pipe truck, diesel engine Package Price: $32,000
GUS PECH SUPER 32 BUCKET RIG (ref#2881) mounted on 1974 Dodge truck, runs daily Price: $25,000
LIMITED ACCESS DRILL RIG (Ref#7578N)
Cleveland trencher undercarriage, 32” ring gear, 33’ depth capacity, 6 cyl Chrysler Industrial gas engine, hydraulic outriggers, 18”, 24” and 30” buckets, 18” core barrel, (1) 10’ stem, good condition Price: $45,000
Sun Machinery Corp.