Oilfield Rigs

Below is a list of some of the used and new drilling rigs and support equipment that Sun has available for sale at various Us and International locations. Additional information is available upon request and you may view many of the rigs on our website.

Sun looks forward to hearing from you and be advised that we are continuously interested in any drilling or workover equipment that you have for sale.

DRAW WORKS: WILSON MODEL 90 DRAW WORKS. MAIN DRUM GROOVED FOR 1-1/8” DRILL LINE AND POWERED BY TWO (2) CUMMINS KTA19-G2 INDUSTRIAL ENGINES RATED AT 600 CONTINUOUS HORSE POWER EACH.

MAST: SUPERIOR STYLE DERRICK 136’-0” CLEAR HEIGHT, 18’-6” BASE, 600,000 lb. GNC, 428,000 lb. STATIC HOOK LOAD MAST WITH CROWN CLUSTER CONSISTING OF SIX (6) 42” Dia. SHEAVES AND ONE (1) 55” Dia. FAST LINE SHEAVE, ALL GROOVED FOR 1-1/8” WIRE LINE.

SUBSTRUCTURE: 12 FOOT. BOX-ON-BOX CONVENTIONAL SUBSTRUCTURE. WITH 450,000 lb ROTARY CAPACITY, 300,000 lb SET BACK CAPACITY AND 750,000 lb SIMULTANEOUS ROTARY AND SETBACK LOAD.

TRAVELING EQUIPMENT: WILSON 300 TON UNITIZED HOOK/ BLOCK COMBINATION. COMPLETE WITH FIVE (5) 36” Dia. SHEAVES SKYTOP 6BX SWIVEL.

ROTARY TABLE: SKYTOP BREWSTER MODEL RSH 27-1/2” ROTARY TABLE CHAIN DRIVEN OFF THE DRAW WORKS ROTARY COUNTERSHAFT AND COMPLETE WITH VARCO “MSPC” SOLID BODY PIN DRIVE MASTER BUSHING AND TYPE “20-HDP” PIN DRIVE KELLEY BUSHING FOR A 4-1/4” API SQUARE KELLY.

MUD PUMPS: ONE (1) NATIONAL MODEL C-350 DUPLEX MUD PUMP. POWERED BY A CATERPILLAR MODEL 3412TA DIESEL ENGINE.

ONE (1) EMSCO MODEL DA-700 DUPLEX MUD PUMP. POWERED BY A CATERPILLAR MODEL D-348 DIESEL ENGINE.

SHAKER TANK OF APPROXIMATELY 200 BBLS WITH ONE (1) DERRICK 3 CONE DESANDER, ONE (1) DERRICK 7.5 HP HORIZONTAL MUD AGITATOR AND ONE (1) DERRICK MODEL FC313 LINEAR MOTION SHALE SHAKER.

SUCTION TANK OF APPROXIMATELY 300 BBLS WITH ONE (1) 8” x 6” MISSION CENTRIFUGAL PUMP POWERED BY A 60 HP AC ELECTRIC MOTOR AND ONE (1) 6” X 5” MISSION CENTRIFUGAL PUMP POWERED BY A 60 HP AC ELECTRIC MOTOR. TWO (2) DERRICK 7.5 HP HORIZONTAL MUD AGITATORS. MUD MIXING HOPPER COMPLETE WITH VENTURI.

WATER TANK: ONE (1) 450 bbl CAPACITY WATER TANK COMPLETE WITH TWO (2) 3” x 2” SERIES 250 CENTRIFUGAL WATER PUMPS POWERED BY 20 HP AC ELECTRIC MOTORS.

ELECTRICAL SYSTEM: TWO (2) 400 Kw GENERATORS POWERED BY TWO (2) DETROIT MODEL 12V-71T AND 8V-92T DIESEL ENGINES. COMPLETE WITH SWITCHGEAR AND TRANSFORMERS.

AUXILIARY EQUIPMENT: ONE (1) RETRIEVER WIRELINE MEASURING UNIT COMPLETE WITH 15,000 Ft. OF 0.092” WIRE LINE.

COMPRESSED AIR SYSTEM: TWO (2) GARDNER-DENVER MODEL ADR AIR COMPRESSORS POWERED BY TWO (2) 30 HP ELECTRIC MOTORS.

ONE (1) GARDNER-DENVER UNITIZED BASE MOUNTED AIR COMPRESSOR DELIVERING 150 CFM AT 125 PSI AND POWERED BY A 50 HP AC ELECTRIC MOTOR.

DRILL STRING: 248 JTS - 4-1/2” OD, 16.60 lb/ft, RANGE II, GRADE G-105 DRILL PIPE.

HANDLING TOOLS: 250 TON HANDLING TOOLS FOR CONTRACTOR’S DRILL PIPE AND DRILL COLLARS.

Hoisting: Brewster N-55   Console: Rebuilt October 2005
Compound:    Brewster, Inline, 2 Engine, 2 New 24" Clutches Rebuilt October 2005
Air Compressors: (2) Quincy Model 325   Quantity        2

Power #1: Caterpillar 3408 Ser #67u9164/67u42084 - 425 Hp Rebuilt
Power #2: Caterpillar 3408 - 425 Hp Rebuilt
Torque Converters    Twin Disc Model:11524-Tc-0 With New Extra Large Oil Coolers, Rebuilt Ser #42084/39013
Parkersburg Model: 40r Ser # A5-73 Brake
Crownblock Line Size: 1 1/8, Diameter: 36"X 60", No. Of Sheaves: 6, Rebuilt April 2006 Sowa 250 Ton Traveling Block And Hook, 5 Sheaves
Bj 250 Ton Hook
Elevator Links

Drill String Elevators    250 Ton, 5”, Inspected And Rebuilt
Drill String Slips, 5”, 6-1/4 Drill Collar Slips
Mast: 131’ X 480,000# Lcm Ha27155 Mast, Serial# T-2160, Rebuilt November 2005, 4" Stand Pipe New Figure 400 "6000" Psi Unions
Substructure:    15’ Height, 46'lx 24'w
Rotary Beam Height: 11'3"
Conductor Pipe Specs: 16" Diameter, 11'2" To Top Of 8" Flow Nipple
10'sub X 5' Pony, New V-Door, 2 Cat Walks W/ Pipe Stop, Stairs And Hand Rails
Air Tanks: 2 Systems Drillers Side For Dp/Kelly Spinner, & Hoist.
Off Driller Side For Drawworks With Check Valves To Prevent Clutch Failure.
Vertical Air Tank In Power House
Water Pumps: (2) New MCM Model:3x2x2.50x20h.P
Generator House: 40.5'l X 10'w X 9'h, (2) Cat 34406b
Kw:        210kw/275kw Rebuilt
Parts House On End, Motor Controls, Transformer, Air Compressor, Receiver Tank And Day Tank
Quincy 25 Hp Screw Style Air Compressor - Rebuilt
Mud Pump #1:    Lanzhou F-1000 X 10" Stroke, 398 Cat 925 Hp @ 1200 Rpms

New As Of May 03, 2007
Features:
        1. Unitized On 1 Skid
        2. Quick Change Motor Removal With Hydraulic Belt Tensioners

        3. Wpt Power Take Off
        4. Belt Driven Pre-Charge Pump
Mud Pump #2 : Lanzhou F-1000 X 10" Stroke, 398 Cat 925 Hp @ 1200 Rpms
New As Of May 03, 2007
Features:
        1. Unitized On 1 Skid
        2. Quick Change Motor Removal With Hydraulic Belt Tensioners
        3. Wpt Power Take Off
        4. Belt Driven Pre-Charge Pump
Liner Washer Tank: Wri 200 Gallon Capacity,   (2) 1 1/2x1 1.5 H.P.
Rotary Table: Ideco Shs 23.5, Kb: 16' 4", Split Master Bushing, Rebuilt, Square Style
Swivel: Continental Emsco L.A. 300, 300 Ton, Rebuilt As Of October 2006 Kelly: Smf, Connections:        Upper 6 5/8 Regular Lh X 4 1/2 X-Hole Rh Lower
Model:        4 1/4 Square 40' Oa X 37' Wa
Characteristic:        New As Of October 2005
Kelly Spinner: Oilworks OWI 1500, New As Of October 2005
Drill Pipe Spinner: Oilworks, Model: OWI35C7, New As Of October 2005

Air Hoist: Ingersoll Rand Model: 6kul, Rebuilt By Oilworks As Of October 2005 Kelly Bushing Varco Style Model: Hds, New As Of November 2005

Tongs: Foley Type B, Heads 4 3/4-8 3/4
Mud System: Shale Tank Approx 350 Bbl Capacity, 10’ X 6’ X 55’, Remanufactured In 2005
Features:
        1. V-Bottom Design
        2. (4) 10" Dumps To Reserve Flush With Bottom
        3. Inline Design (4) Compartment With (1) Agitator In The 4th Compartment
        At 10" Equalizer
        4. Grated Flooring Over Entire Pit For Safety
        5. Hand Rails Around Perimeter And Removable
        6. 360 Degree Lighting On Rig Side Of Pits
        7. Flush Personnel Access Hatches
        8. Wash Down Hoses, Hose Racks, Work Trays, Telescoping Light Poles
        9. 30'x 6" Qc Light Weight Suction Hoses To Reserve With
        Flotation For Filling Pits With Mud Mixing Pumps
        10. Folding Stair To Help Make Rig Moves More Efficient
        11. Folding Solids Trays To Reserve Plumbed To Skimmer Pump To Keep Trays
        Clean For Desander, Desilter And Shaker
        12. Skimmer Pump Piping On Reserve Side
        13. Bypass To Circulate Reserve Is Unitized In Compartment 1 Under The Shaker
        To Circulate The Reserve "Does Not Have To Be Removed For Rig Move"
        14. 8" Butterfly Valves Between All Compartments
        15. Over Flow To Reserve
Suction Pit: Approx 250 Bbls Capacity, 8'w X 6'h X 47'l, Remanufactured In 2005
Features:
        1. Round Bottom Design
        2. (3) 10" Dumps To Reserve Flush With Bottom
        3. Inline Design, 2 Compartment, 50-60 Bbls Pre Mix With Agitator,
        Suction Compartment With 2 Agitators
        4. Grated Flooring Over Entire Pit For Safety
        5. Hand Rails Around Perimeter And Removable
        6. (2) 1.5 Gallon Sweep Tanks On Pit For Each Mud Pump At Waist Height
        So Derrick Man Does Not Have To Leave Pit
        7. Provisions For Skimmer Pump Feed For Filling Or Cleaning
        With Reserve Water
        8. 1" Air And Fresh Water Lines On Rig Side Of Pits
        9. 360 Degree Lighting On Rig Side Of Pits
        10. Inspection Slot For Mud Sampling At Hopper
        11. Control Valves Under Hatches
        12. Flush Personnel Access Hatches
        13. Wash Down Hoses, Hose Racks, Work Trays, Telescoping Light Poles
        14. 30'x 6" Qc Light Weight Suction Hoses To Reserve With
        Flotation For Filling Pits With Mud Mixing Pumps
        15. 10" Bull Dog Equalizer Boot
        16. Stairs Are Integrated And Do Not Have To Be Removed For A Rig Move "Stairs
        Are Removable To Service Mixing Pumps"
        17. Overflow To Reserve
Mud Mixing Pumps: (2) O'dril Model: 6x5x11x2.50x50 H.P., With Dodge Couplings, New As Of October 2005
Features:
        1. Designed So Pits Can Be Filled From Reserve.
        2. Designed As Back Up For Charge Pump On #1 & #2 Mud Pump
        3. Hopper On Top Of Pits "New 10-05"
        4. Designed So Either Pump Can Be Used As Mud Mixer Or Charge Pump To
        #1 And #2 Mud Pump
Shale Shaker: Swaco, Model: "A.L.S." Linear Motion, Rebuilt As Of October 2005
Solids Control
Desander: O'dril, 10' X 2 Cones 1000gpm, Power: 6x5x11x2.50x50h.P. With Dodge Couplings, New As Of October 2005
Desander: O'dril, 5" 10 Cones 800gpm, 6x5x11x2.50x50h.P. With Dodge Couplings, New As Of October 2005
Agitators: Derrick, 5 H.P. X 36" Blades, (3) In Suction Pit And (1) In Shale Pit, New As Of October 2005
Blowout Prevention And Control Equipment,
Annular Reagan 10 3/4", New Element Installed As Of September 2006
Ram Type Schaffer Double Type –E 3000psi, Type 39 Rams, (1) 4 1/2 Pipe, (1) 5 Pipe, (1) 5 1/2 Pipe, (1) Blind, Rebuilt
Closing Unit Payne 4 Station 3000 Psi, Inspected And Repaired As Of October 2005
Choke Manifold: Superior Valve, Chokes: (2) 2" 5000 Psi, Valves: (2) 2" 5000 Psi,(1) 4" 5000 Psi. Full Flow Cross, New As Of October 2005
Fresh Water Storage: Shop, Approx 500bbl Square With Crimped Walls, 7'2"W X 10'5"T X 38'l, New As Of 2005 Drill Pipe: 5" Quantity: 8-9000', 19.5#, 4 1/2 If Conn
Drill Collars (21) 6 ¼, 4 1/2 X-Hole, Bb Box, Rg Pin, Slip Recess, 10" Hb On Box, New As Of October 2005
Weight Indicator: Martin Decker Seal-Tite weight indicator, New As Of October 2005
Tongue Pull Back Gauge: AOI, 20,000 Ilb Line Pull, New As Of October 2005
Presser Gauge: AOI 5000 PSI, New As Of October 2005
Wireline Unit: Five Star, Model: .092 15,000', New As Of October 2005
7500’ 1.125” Drill Line, new spool October 2006

55’ Rotary Hose
Triangle Pipe Racks (6) sets, (1) 42" X 30' (3) Sets 39" X 30' (2) Sets Casing Pipe Racks 10" X 30'
Upper Dog House: 7'6"W X 20'l, Lockers, Benches, Knowledge Box, New Heater And Lighting
Lower Dog House: Lockers
Electrical: Mast/Sub/Pits/ Pumps, 360 Degree Lighting, Appleton Receptacles, 208v Transformer

Depth capacity 13,000-20,000ft, Wireline 1-3/8”, Hoisting drum size 30” x 56 ¼, Brake rim 54” x 10-3/8”, Baylor hydraulic brake model 6032, Skytop Brewster 142’ x 1,134,000# mast with National 650-6500 crown block, Substructure and doghouse, (3) gear boxes with torque converter 300-64-FH, (3) Cat D398 diesel engines N-760HP, (2) National 10-P-130 triplex mud pumps, National C275 rotary table, 500 ton, CH400 Romanian swivel, National 650-G-500 traveling block with hook load, 500 ton, (3) Mud tanks, 1765 cubic ft., 2472 cubic ft., 2472 cubic ft. (50m³, 70m³, 70m³), Mixing tank 36m³ (1271 cubic ft.), (6) Hutchinson mud agitators, (6) electric engines for mud agitators N=5hp, SWACO 8T4 desander/desilter, (3) supercharge pumps 10 x 8”, Rig instrumentation MD type E, (2) 2200# pneumatic winches

			Manufactured		Reburbished
Drawwork	National N 1320M	1980		1998
Derrick	Skytop Brewster	1980		1998
Substructure	Skytop Brewster	1980		1998
Travelling Block + Hook	National Oilwell G 500	1980		1998
Rotary Table	IDECO LR 275	1980		1998
Mud Pumps	2 pcs. National 10-P-130 Triplex	1980		1998
Engines	3 pcs. Caterpillar D 398	1980		1998
Swivel		1980		1998
Shale Shaker	SWACO Linears	1996
Desander/Desilter	SWACO 8 T 4	1997
4 Mud Tanks	Total Volume: 350 m3	1980		1998

LS30H-AC drilling rig is designed and manufactured according to the principle "advanced performance, reliable operation, convenient mobilization, economic operation and meeting HSE requirements". The performance and quality has reached or are beyond the advanced level of international similar drilling rigs.

The rig is designed with advanced technology with reliable equipment. Some components are imported.

The performance of drilling rig satisfies the drilling requirements to the maximum limit.

The reasonable layout of the rig meets the requirements for helicopter hoisting, with assembly by an on-site crane.

Mast: 138 ft. triple 750,000 lb. cantilever. Sub: 750 hydraulic swing up, 25 ft. high x 27 ft. 6 inch wide, C/W with hydraulic BOP handler, 37.5 inch table. Mud Pumps: 2- GD PZ 10 1350 hp, 4- GE 752 1000 hp electric drive motors, 2- STD pump buildings. Mud System: 2- tank system, trip tank compartment, pill tank compartment, dual SWACO shale shaker, 2- poor boy degassers, 7.5 agitators in each compartment, 3- 5X6X 13 mission pumps C/W 50 hp electric motors, vortex shear mixer hopper, hydraulic fold down roofs over each mud tank, sand trap compartment. Draw Works: 1500 hp AC drive, 1-1/4 inch drill line, EATON 336 WCSB, hydraulic survey line unit, powered with 1500 hp electric motor. BOP: 13-5/8 shaffer, double gate, nace trim, 5000 psi, annular. Manifold: 3x3 double gut, 2- electric operated pason chokes, 5000 psi, mounted in heated oilfield skid shack, Accumulator: control tech 180 gal, 2- 25 hp electric C/W triplex pumps, nitrogen bottles, accumulator bottles. Blocks: American style 350 ton. Top Drive: varco TDS- 11 AC drive, Iron Roughneck: pragma torq-matic 90, Tongs: type H 42 inch C/W 2-3/8 x 10-3/4. Drill Collars: 6- 8 inch, 21- 6 inch. Drill Pipe: 4300 meters of 4 inch. Water Tank: 75 cubes capacity, oilfield style skid. Gen Build: 2- 3512 CAT GEN C/W 1225 KATO GEN, oilfield style skid building. SCR Build: national SCR package, air conditioned, 3508 CAT spare genset, oilfield style skid building. Tool House: fuel tank 85,000 liters capacity, oilfield style skid building, parts room, change room. Boiler Build: 125 hp boiler, water tank, fuel tank, oilfield style skid building. Push Shack: 12 x 52 skidded shack, 60 KW GEN set. Pipe Tubs: 7- forklift accessible range 3. Catwalk: pragma style, hydraulic skate function, hydraulic level rams, hydraulic pipe arms. Pipe Racks: 4- pipe racks. Doghouse: PLC controlled doghouse panel, push out drillers console, electric heated, AC units included, automatic driller, oilfield style skid building. Top Drive Build: workshop area, hydraulic pumps for wrench and spinners, oilfield style skid building. Flare Tank: 8 cube capacity, electric igniter, oilfield style skid building. Suitcase Skid: 8 inch flare line, 4 inch mud line.

Delivery 3 months after contract. Terms of sale: 50% deposit on contract (placed in escrow account), balance upon completion, both by bank transfer. Numerous similar rigs have been manufactured and are currently working. Note: All hydraulic functions are remote as well as manually controlled. In addition, 2000 hp (18,000’) rig can be manufactured for 26,450,000, delivery 12 months. The rig is manufactured in North America .

4000 meters (1350’) with 4-1/2” drill pipe, 3200 meters (10,500’) with 5” drill pipe

Power system: (2) motors for pumps 2884 hp,(2) Cat 3412 on unit 1300 hp, (2) Volvo generator in light plant 1088 hp

Mast: 125' total height, Gross nominal capacity: 500 k lbs, API static hook load capacity: 500k lbs

Substructure: Rig floor setback capacity: 13,500’ 4-1/2” drill pipe, height underrotary table beams 16’, height of substructure 20’

Rotary table 980k lbs rating load, 27-1/2” max opening, max speed range 75 – 200 rpm

Mud pumps: (2) triplex pumps with total power of 2600hp, max pressure rating 5000 psi

BOP Stack: Bag type preventor 5000 psi size 13-5/8”, ram type preventor 5000 psi size 13-5/8”