Cable Tool

SUN MACHINERY CORP.

Call: 516-536-7375 / 516-536-7317 fax

rigs@sunmachinery.com

CABLE TOOL

Alten 24-A, 32A

Bucyrus Erie, 60L, 36L, 29T, 28L, 24L, 22W, 20W

Cable tool/swab rig combo

Cyclone 44R, 43R, 42R, 36R, TH60/36, TH40, 37, 36R, 35(R), 36A

Ideco #10, T16

Keystone 50, 40, 31

Loomis 24

Speedstar 240, 72, 71, 55

Walker-Neer S46A, S-310, S32, S33, C34 WS-31

WALKER-NEER S-43 CABLE TOOL RIG (Ref#3145N) with extensive tools.

Depth capacity 8” hole, 3500’, completely rebuilt, mounted on tandem axle trailer with rebuilt screw joints, Waukesha 4-71 engine (120 hours), bull reel - 10 ľ” x 34” x 46” w/5000’ of new drill line, sand reel – 10 ľ” x 44 7/8” x 32” w/ 6500’ of good 9/16” line, telescoping 8 5/8” x 7” x 60’ double mast pole, spudding beam, disc type shock absorber

Tools:

(110) drills – 2” – 8 ľ” diameter

(15) jars

(8) drill stems

(12) reemers

60 – 80 fishing tools

(40) cable tool wrenches

(2) pallets of assorted tool, jacks, etc.

(1) totally rebuilt 4 Ľ” sand pump w/new chisel and assembly

(8) 3” – 8” bailer

(1) mud plug mixing pot

(12) new oak foundation boards w/new jack stands.

~~PRICE: $150,000~~ PRICE REDUCED: $90,000

WALKER-NEER S32 (Ref#4369N) trailer mounted, pulled by 6 x 6 Army truck with tires chains, HD winch, double pole, 2500’ of new 7/8 drill line, all tools, stems, jars, bits, etc., casing tools 4”, 5”, 7”, 8” and 10”, Waukesha gas/natural gas, working rig, good condition ~~Price~~~~: $140,000~~ Reduced Price: $45,000 - Ohio

WALKER NEER 32 SPECIAL (Ref#1923N) Manufactured 1953, 140 Waukeshaw engine, mounted on dobule axle trailer, 2 lines (drill line, sand line), double pole, friction clutches, some 4-1/2” tools included Price: $60,000

WALKER NEER S32 (Ref#14081N) trailer mounted with Detroit diesel engine, 3 line machine, tooled up for 10” Price: $65,000 - Arizona

WALKER-NEER S32 (Ref#5153) Workover rig, drilling, pull capacity 100,000#, drilling capacity 6” – 2500’, 12” – 1400’, 24” – 700’, (2) 8-5/8” x 7” x 55’ double poles, 3 drum, cathead, single axle trailer with dual wheels, 5th wheel, 2 screw jacks, 2 hydraulic jacks ~~Price:~~ ~~$20,000 – California~~ - OFF MARKET

WALKER-NEER S32 (Ref#13811Nb) Manufactured 1970’s, trailer mounted, Detroit diesel engine, 40’+ mast height Price: $60,000 - Arizona

WALKER-NEER WS31 (Ref#6443Nb) trailer mounted, Continental Red Seal gas/propane engine, rebuilt, 2 rear mechanical jacks, no ools Price: $40,000 – Arizona

WALKER-NEER WS31 (Ref#6443Nc) Ford 300 Industrial gas/propane deck engine, mounted on Ford 8000 with Cat engine, 2 rear mechanical jacks, no tools Price: $40,000 - Arizona

WALKER-NEER WS-31 (Ref#12488) weighted double pitman walking beam, ľ” line, 6 hydraulic jacks, 40” stroke, 2 part casing line or use hydraulic winch, 50’ derrick, 18 shocks, elevator to about 25’, 220 cubic in Hercules diesel deck engine, 4 speed trans., new 5V power belt, mounted on 1973 International 345 cu V8 gas engine new or rebuilt, new tires, power steering, air brakes, new 5” tools 30’ overall with button bit and mixing bar. Price: $100,000 - Michigan

WALKER NEER WS-31 (Ref#743N) propane deck engine, mounted on 1963 Chevy tandem axle truck with gas engine, fully tooled 5” up to 12”, bits, bailers, etc, operating condition Price: $29,000 - Idaho

WALKER NEER 31 (Ref#13443N) Butane deck engine, mounted on 1962 Chevy truck with gas engine, 30’ mast, winch, elevator, 2 sets of jars, wrenches, drill bit, currently drilling Price: $44,000 – New Mexico

WALKER NEER WS31 (Ref#4446N) Manufactured 1988, propane deck engine, double drum, 40” stroke, mounted on 1977 Mack truck with Mack diesel engine, 3 hydraulic leveling jacks, 600’ of ľ” cable, no tools Price: $50,000 – Oklahoma

WALKER-NEER CABLE TOOL RIGS 34 & 37 (Ref#978N)

6000’ depth capacity, 3 available - Texas

A. WALKER-NEER 34 (Ref#978Na)

3 drums, spudder, 8-5/8” x 7” x 65’ double pole, Tandem axle trailer with 5^th wheel, 237 hp Mack in line 6 cylinder diesel engine, 4 speed transmission, Controls, gauges, battery starter, fuel tank, Excellent condition, Ready for immediate use. 7/8” line on 2 drums, 5/8” line on sandline drum Price: $90,000

B. WALKER-NEER 34 (Ref#978Nb) 3 drums, spudder, 8-5/8” x 7” x 65’ double pole, Tandem axle trailer mounted with 5^th wheel, 237 hp Mack inline 6 cylinder diesel engine, 5 speed transmission, Controls, gauges, battery starter, fuel tank, Excellent condition, Ready for use, 7/8” line on 2 drums, 5/8” line on sandline drum Price: $90,000

C. WALKER-NEER 37 (Ref#978Nc) 3 drums, spudder, 8-5/8” x 7” x 65’ double pole, Tandem axle trailer mounted with 5^th wheel, 237 hp Mack in line 6 cylinder diesel engine, 4 speed transmission, Controls, gauges, battery starter, Excellent condition, Ready for use. 7/8” line on 2 drums, 5/8” line on sandline drum Price: $90,000

WALKER NEER 32 SPECIAL CABLE TOOL RIG (Ref#834N) trailer mounted, Waukesha propane deck engine, twin pole mas, good assortment of tools, running condition Price: $~~30,000~~ PRICE REDUCED: $26,500

WALKER NEER S32 (Ref#651N) Manufactured 1963, trailer mounted with 371 Detroit engine, 4 line machine, fully tooled 3” up to 26”, running now ~~Price~~~~: $70,000~~ PRICE REDUCED: $55,000 - Idaho

WALKER NEER 22 (Ref#4213N) Manufactured 1960’s, completely overhauled, propane deck engine, mounted on 1970 International with Cat engine, 3 line machine, fully tooled up 6” to 12”, bits, bailers, wrenches, drill stem, etc, 800+’ of cable, ready to go Price: $27,500 – Arizona

CARDWELL H (Ref#986N) double drum workover and cable tool rig, mounted on tandem axle trailer, 1800’ sandline with about 4,000’ of new line on a spool, new block, doghouse on trailer, 6 cylinder Hercules deck engine propane, 55’ pole with 3 settings 42’, 48’ and 55’, (3) 15 ton manual jacks, 20’ stem and jars, elevators, bails, boomers, tubing group slip, quick hitch block, (2) breakout tongs, tubing tong, rod wrenches, cable line cutter, 30’ bailer Price: $55,000

ALTEN 32A (Ref#12490) next heavier than 22W, new jack shaft, drill gear, clutches with ball throw out bearings, 4 hydraulic jacks, weighted walking beam platform for driller, 52’ derrick with 22 Walker-Neer shocks, 2 part casing line, elevator, 4 cyl Ford D172 rig engine with 4 sp transmission, new 7V power belt, mounted on 1970 6x6 multi-fuel truck, new 30’ 5” tools with button bit and mixing bar, 20’ 4” bailer (dart) Price: $80,000 - Michigan

ALTEN-LOOMIS 32 (Ref#3139N) mounted on 1979 Ford F800 (not 4x4) with 371 gas engine, 3 line machine, cathead, new clutches, bearings, rebuilt Cont Red Seal on deck, 6” and 8” tools, 8” bailer, J wrenches, jars, sockets Price: $30,000 - Ohio

ALTEN 24-A (Ref#12489) Similar to 22W, mechanically perfect, main gear has always been covered, shows little to no wear, main shaft, twin disc clutches, roller main bearing, ball throw out bearings, 52’ derrick with 20 new 20W shocks, pulleys all anti-friction, derrick tips up by hydraulic, elevator to about 25’, 162 in Continental with 4 sp transmission, new 5 v 1 piece power belt, main big pulley has added weight for fly wheel drilling effect, walking beam weighted, mounted on 1978 International truck with 537 cu V8 engine, new carb, dist, and valve job, new tires, 10 sp Road Ranger transmission, air brakes, power steering, new tools 30’ overall with button bit and mixing bar, 20’ dart dialer (4” wells), driller’s platform Price: $85,000 - Michigan

ALTEN 24 (Ref#15183) Manufactured 1964, mounted on 1980 GMC truck, 6” stems, Red Seal motor with gearshift, one owner rig Price: $49,500 – West Virginia

ALTEN 24 (Ref#15140) Manufactured 1963, Continental gas engine on deck (only 10 hours on overhaul), mounted on International truck with gas engine, 42’ derrick, bailer, bits, etc., tools, sitting for 10 years

Includes 1971 Dodge ľ ton pickup and water trailer with 600 gallon tank Price for package: $24,500 - Texas

ALTEN-LOOMIS 24 (Ref#14949) Manufactured 1971, mounted on 1979 Ford truck, rig and truck like new, lots of tools Price: $31,000 - Connecticut

ALTEN-LOOMIS 24 (Ref#6821N) Manufactured 1965, mounted on 1972 International 4 wheel drive, 3 line machine, 2 drill stems, 3 rope sockets, (2) 6” bits, (1) 8” bit, jars, fishing tools, 500’ of drill cable Price: $39,500 - Pennsylvania

ALTEN-LOOMIS (Ref#205N) 48’ derrick, Continental Red Seal gas motor on deck with gearshift, 6” and 8” stems, bits, jars, fishing tools, etc, mounted on 1976 Ford 7000 truck Price: $30,000 – New York

ALTEN CABLE TOOL RIG (Ref#2077N) Gasoline engine, On skid, Single axle trailer, With tools Price: $16,500

LOOMIS CLIPPER 24 (Ref#9607) mounted on late model International S Model truck, 3 line machine, gas deck engine, set up for 6” wells, 22’ derrick Price: $27,500 - Ohio

LOOMIS SUPER 24 (Ref#13555) Mounted on 1983 Ford 600 truck, 4 cyl engine, 40’ telescopic mast, automatic braces, bailers, stabilizers, wrenches, bits, some tools, good condition Price: $25,000 - Arizona

KEYSTONE 50 (Ref#6774N) Ford 196 cu in gas engine on deck (excellent), mounted on GMC tandem axle truck with GMC gas engine, 5 hydraulic leveling jacks, boom lifts and extends hydraulically, 3 line machine, 2 line operates mechanically, 3^rd line is hydraulic, 6” and 8” tools Price: $35,000 - Pennsylvania

KEYSTONE 50 (Ref#5976N) Manufactured 1950, Ford diesel deck engine, mounted on old Army 4x4, no engine, 3 line machine, tooled up 4” to 16”, no leveling jacks Price: $45,000

KEYSTONE 50 (Ref#2810N) Manufactured 1950’s, mounted on Fod F800 truck, 4 cyl Continental gas deck engine, 3 line machine, 4-1/2” stem, 6” and 8” bits, 500’ fairly new drill cable, 500’ sandline, good running condition Price: $40,000 - Pennsylvania

KEYSTONE 50 (Ref#3523Rb) Manufactured 1950’s, rebuilt 6 cylinder Continental gas deck engine, mounted on 1972 Mack R600 tandem axle truck with diesel engine, 2 line machine, 3 hydraulic leveling jacks, tooled up for 6”, good condition, ready to go Price: $27,500 - New York

KEYSTONE 50 (Ref#3921N) 300 Ford on deck, hydraulic jacks and wrenches, tools and many extra parts, mounted on 1981 International 1554, DT 466 4 x 4 truck, winch, no CDL required Price on Request - Pennsylvania

KEYSTONE 50 (Ref#2671N) 4 cyl Continental gas on deck, mounted on 1989 Ford F800 truck with diesel engine, 3 lines, new string tools, 3 jacks Price: $45,000

KEYSTONE 50 (Ref#7657) 2 drum, extra electric operated drum for casing, hydraulic jacks, Perkins diesel engine on deck, mounted on 1967 GM truck with gasoline engine, hydraulic jacks, wrenches, some 6" tools Price: $22,000 - Vermont

KEYSTONE 50 (Ref#14415) 6 cyl Red Seal gas deck engine (newly rebuilt, less than 150 hours), mounted on 1985 GMC 5000 truck w/350 gas engine, 2 line machine, 56’ mast, set up for 6” – 12”, 1500’ depth capacity, 2 jacks, fully tooled, 800’ of new ľ” drill line, 800’ of new sandline, good condition Price: $37,500 – New York

KEYSTONE 40 (Ref#9517) Chrysler industrial engine, 700’ 5/8” drill line, 600’ of 3/8” sandline (near new), hydraulic leveling jacks, hydraulic tool breakout, mounted on 1985 GMC 7000 truck, tooled for 6”, lots of tools, stems and bits Price: $30,000 - Vermont

KEYSTONE 31 (Ref#5638) Manufactured 1965, cable tool, 2 lines, Ford 4 cyl gas on deck, 30’ derrick, breakout wrench, tooling, mounted on 1988 Chevy with 350 gas, good condition. Price: $25,000 - Indiana

KEYSTONE 31 (Ref#83Nb) gas on deck, mounted on International tandem truck with diesel engine, 4” hools Price: $19,000 – Florida

KEYSTONE 31 (Ref#83Nc) unmounted Price: $9,000 - Florida

STONE 31 (Ref#11145) fair condition, older Chevy truck with gas engine, 4 cyl Waukesha on deck, new carburator, 4” string of tools, bailer, 2 lines Price: $15,000 - Florida

SPEEDSTAR 240 (Ref#11121) mounted on 1978 International truck single axle truck with 549 gas engine, 4 cyl Continental gas deck engine, various size hole openers, extra drill bars, all hand tools, no fishing tools, bailers, bits, casing driver, breakout wrench, good condition, currently drilling, 350’ depth capacity Price: $11,500 - Pennsylvania

SPEEDSTAR 83 (Ref#14522) gas/propane engine, trailer mounted, 60’ mast, 3-line machine Price: $45,000 - Utah

SPEEDSTAR 72A (Ref#14621) Manufactured 1954, mounted on White truck, new mast, new clutch, excellent condition, drills elevator holes Price: $33,000 – New York

SPEEDSTAR 72 (Ref#277Na) Manufactured 1955, trailer mounted, no engine

BUCYRUS ERIE 24L (Ref#277Nb) trailer mounted

6 x 6 Army Service Truck

Package Price: $65,000 – Located Pennsylvania

SPEEDSTAR 72 (Ref#13278) Manufactured 1960, gas engine on deck, mounted on Rio truck w/gas engine, 3 line machine, 60’ mast, no jacks, good condition Price: $47,500 cable and tools available for extra money – New York

SPEEDSTAR 72 (Ref#13277) Manufactured 1949, BUDA 394 gas deck engine, mounted on International R190 with gas engine, 3 line machine, 48’ mast, no jacks, new paint, good condition, currently drilling Price: $38,500 cable and tools available for extra cost. – New York

SPEEDSTAR 72 (Ref#9349) 3 drum, auto braces, hydraulic levelers, 6 cyl Continenetal engine, mounted on International tandem axle truck, air brakes, good condition Price: $39,000 - Pennsylvania

SPEEDSTAR 72 (Ref#7464) Manufactured 1974, mechanical clutches, double band brakes, mast extensions Price: $80,000 - Wisconsin

SPEEDSTAR 72 (Ref#6371R) mounted on trailer with 5^th wheel, 6 cyl Continental gas engine Price: $29,000

SPEEDSTAR 71 (Ref#547N) mounted on 1998 IH diesel truck M-11 Cummins engine, tandem axle, Continental 4 cyl rebuilt engine, some tools, all new cables, 6” and 10” bits, newly refurbished, fresh paint Price: $67,000 Price without truck: $45,000 – Oregon

SPEEDSTAR 71 (Ref#2902N) 40’ telescoping mast, 4 cylinder Continental gas engine, fully tooled 6” to 8”, stems, adapters, fishing tools, welder, cutting torches, etc Price: $42,500 Canada

SPEEDSTAR 71 (Ref#8341N) Red Seal gas deck engine, mounted on Ford F6000, 3 line machine, 1000’ of new 5/8” drill line, new 4” tools Price: $27,500 - Florida

SPEEDSTAR 71 (Ref#6075N) manufactured 1985, Perkins diesel deck engine, mounted on Chevy single axle truck with 350 gas engine, 42’ telescoping mast, ľ” cable, 4 mechanical jacks Price: $50,000 - Pennsylvania

SPEEDSTAR 71 (ref#14399Nb) 3 line machine, trailer mounted, needs new engine and mainline POR

SPEEDSTAR 71 (Ref#3163N) propane deck engine, 3 line machine, mounted on 1057 GMC dually with gas engine, 1000’ of new 7/8” cable, 6” and 8” bit, 5” bailer, no jars or sockets, 2 rear mechanical jacks Price: $20,000

SPEEDSTAR 71 (Ref#12818N) gas deck engine, mounted on 1972 Ford F800 truck with 391 gas engine, less than 1000 hours on rebuild, 3 line machine, hydraulic breakout, 3 leveling jacks, 6” and 10” tools, misc bits, Lincoln welder, good condition, currently drilling Price: $29,500 - Montana

SPEEDSTAR 71 (Ref#10765N) 3 line machine, 4 cyl Continenetal gas deck engine, mounted on 1956 6x6 Army truck all wheel drive with gas engine, bailer, bits, subs, many extras, 300’ cable, all tools, 2 rear jacks Price: $40,000 – New York

SPEEDSTAR 71 (Ref#6225N) Manufactured 1973, 3 line machine, 4 cyl Continental deck engine, mounted on 1972 International truck with 50,000 miles, 650’ of new ľ” cable, bailing line, sandbailer, button bits, all tools Price: $22,000 - Pennsylvania

SPEEDSTAR 71 (Ref#7009Na) Manufactured 1970’s, Continental 3 cylinder gas deck engine, mounted on 1970 GMC single axle truck with gas engine, 3 line machine, 40’ telescoping mast, 1750’ drill line, bits, bailer, 7” tools, no leveling jacks Price: $28,500 Texas

SPEEDSTAR 71 (Ref#4578N) Manufactured 1970’s, mounted on 1978 Ford F700 truck, 4 cyl International gas engine, V8 gas engine in truck, 2 line machine, new drill bar, 3 hydraulic jacks, 500’ cable, recently changed bearings, recentlypainted Price: $43,500 – New York

SPEEDSTAR 71 (Ref#9349B) mounted on military truck, with gas engine Price: $30,000 - Pennsylvania

SPEEDSTAR 71 (Ref#2675N) 1943, completely rebuilt, 3 cylinder Deutz diesel deck engine, oversized bull gear shaft with custom bearings, mounted on 1976 GMC with 366 gas engine, 3 line machine, hydraulic winch, 40’ hydraulic raised mast, hydraulic breakout cylinder, drillers platform, 3 hydraulic leveling jacks, bailers, subs, pipe, all tools, complete and ready to go Price: $40,000 - Maine

SPEEDSTAR 71 (Ref#6573N) 27K propane, 3^rd line, mounted on Ford F900 with Cat diesel, bailer, rope socket, bits, subs, etc. 4 hyd jacks, currently drilling Price: $42,000 - Washington

SPEEDSTAR 71 (Ref#15512) Manufactured 1951, Ford 200 gas deck engine, mounted on 1975 Chevy C60 truck with 366 gas engine in truck, 300-400’ of 5/8” cable,, hydraulic jacks and breakout, 6” but and bit, 8” sub and bit, drill stem, rope sockets, J wrenches, working condition Price: $28,500 - Maine

SPEEDSTAR 71 (Ref#14917) 235 Chevy gas deck engine, mounted on 1946 International truck with 292 Chevy gas engine, both engines rebuilt, sandline, mainline, 1 front 2 rear jacks, good condition Price: $19,000 - Nevada

SPEEDSTAR 71 (Ref#14916) 235 Chevy gas deck engine, mounted on 1950 Chevy truck with 292 Chevy gas engine, both engines rebuilt, sandline, mainline, 1 front 2 rear jacks, good condition Price: $22,000 - Nevada

SPEEDSTAR 71 (Ref#15643) new Duetz diesel deck engine (only 1800 hours), mounted on 1977 Ford F700 truck tandem axle, with 390 gas engine, 3 line machine, 2 rear manual jacks, tools, some cable, good running condition Price: $40,000 - Pennsylvania

SPEEDSTAR 71 (Ref#13985) mounted on 2-ton Ford truck, no tools, Continental engine Price: $22,000 - Washington

SPEEDSTAR 71 (Ref#13153) Mounted on 1993 International truck, rebuilt Continenetal gas deck engine, cathead, casing reel, new jackshaft and bearings, welder, screw jacks, fully tooled, j-wrenches, bailers, jars, swivel, etc. ready to drill Price: $37,500 - Wisconsin

SPEEDSTAR 71 (Ref#12923a) Red seal 4 cyl gas deck engine, mounted on Ford truck w/6 cyl gas engine, new shafts, rebuilt sheaves, 12” bit, tools for 6 – 12” Price: $20,000 - Wisconsin

SPEEDSTAR 71 (Ref#9109) mounted on 3 axle trailer, hyd outriggers, hyd winch, water pump, new 306 Industrial engine, tooling Price: $39,500 - Wyoming

SPEEDSTAR 71 (Ref#11333) Ford gas engine on deck (rebuilt), mounted on Ford truck with V8 gas engine, 4 hydraulic leveling jacks, 2 winches, some tools Price: $17,500 - Kansas

SPEEDSTAR 71 (Ref#6037) Manufactured 1956, 3 lines, Continental gas/propane, mounted on Ford tandem axle with propane gas Price: $26,500 - Washington

SPEEDSTAR 71 (Ref#13436) mounted on 1970 GMC truck, 6” and 8” bits, tools Price: $20,000 - Idaho

SPEEDSTAR SS-61A (Ref#12486) 48’ derrick with 18 new 20W Bucyrus shocks, elevator to about 20’, 163 Continental rig engine (rebuilt) 4 speed transmission, 5V power belt (new), 28’ overall 4” tool with mixing bar and button bit, rebuilt jack shaft with new bearings, clutches and spudding gear, weighted double pitman walking beam, new shaft and bushing in spudder pulley, 3 hydraulic jacks, single or double line, casing line or extra after market hydraulic winch, mounted on 1963 single axle International V8 gas 4-wheel drive, less than 27000 miles, 4 sp trans., 2 sp rear end, new 9:00 X20 steel belted tires, power brakes Price: $90,000 - Michigan

SPEEDSTAR SPUDDER RIG (Ref#7476) Model 6205, flat head 6 cyl Chevy gas engine on deck, 2 line machine with extra set of blocks and cable, mounted on tandem 3600 Chevy (1950) truck with gas, reinforced mast, wrenches, 4” tools, 2” bailer, (2) 6” bailer, 3” bailer, no jaws, pipe rack trailer, 5^th wheel support trailer, extra support truck Price: $30,000 - Pennsylvania

SPEEDSTAR 55 (Ref#13662N) 3 line machine, new line, new jack shaft, hydraulic outriggers, hydraulic breakout wrench, Continetal gas engine on deck (rebuilt), no tools, mounted on 1994 Chevy truck with gas engine Price on Request

SPEEDSTAR 55 (Ref#5077N) Continental gas deck engine, 3 line machine, mounted on GMC, like new mainline, sandline & drill line, 3 hydraulic leveling jacks, welder/generator, tooled up for 6” Price: $35,000 - Oregon

SPEEDSTAR 55 (Ref#2643Nb) no hydraulics, gas engine on deck, cathead, new shifter case, jack shoft good, no truck, rig only Price: $12,500 - Pennsylvania

SPEEDSTAR 55 (Ref#4766N) International gas deck engine, mounted on 1970 Chevy C60 truck with gas engine, 3 line machine, new cable, 3 mechanical jacks, fully tooled for 4”, stored inside Price: $18,000

6” tooling available at extra cost

SPEEDSTAR 55 (Ref#13154) Mounted on 1974 International truck, new Continental gas deck engine (very low hours), mounted on 1974 International truck with gas engine, cathead, casing reel, new jackshaft and bearings, welder, screw jacks, fully tooled, j wrenches, ailers, bits, subs, etc., ready to drill Price: $28,500 - Wisconsin

SPEEDSTAR 55 (Ref#6045) Manufactured 1970, 6 cyl gas on deck, 5 lines, mounted on International truck with gas Price: $19,000 – New Jersey

SPEEDSTAR 55 (Ref#171N) Manufactured 1956, mounted on 1972 Chevy truck, tandem axle, 4 cyl Ford gas engine, 4 x 5 Gardner Denver mud pump, Ford engine runs pump, power swivel Price: $22,500 - Michigan

SPEEDSTAR 55 (Ref#7437) Manufactured 1955, brand new stem, 4 cyl Continenetal deck engine, mounted on 1965 GMC 6 x 6 army truck, 3 lines, new bits Price: $21,500 - Canada

SPEEDSTAR 55 (Ref#14143N) mounted on 1978 International gas truck, 4 cylinder Red Seal rig engine, currently working Price: $25,000 – Ohio

SPEEDSTAR 55 (Ref#4439Na) mounted on 1968 Chevy C60 truck, Red Seal continental deck engine, new jackshaft (needs to be installed),

SPEEDSTAR 55 (Ref#4439Nb) mounted on 1978 Ford F700 truck, V4 Wisconsin deck engine, string of tools

SPEEDSTAR 55 for parts

Package Price: $30,000

BUCYRUS ERIE 60L (Ref#3308N) Manufactured 1958, 3 lines, Waukesha 6 cyl propane, mounted on trailer, 1500’ of ľ” drill line, 2000’ 7/16” sandline, ľ” block line, good gearing, good brake bands, new sheaves, new spudding beam, braces included, 4 new tires, newer axle, 46’ mast, no tools, currently drilling Price: $55,000

BUCYRUS ERIE 60L (Ref#5265Na) Manufactured 1964, diesel engine, mounted on 1969 R Model Mack with 236 Mack diesel engine, 3 line machine, casing strut, 2500’ of brand new ľ” drill line, 2500’ of brand new ˝” sandline, excellent condition, currently drilling, no tools available Price: $85,000 Ohio

BUCYRUS ERIE 60L (Ref#183Nf) 3,000’ depth capacity, 3 drum rig, mounted on White truck with Cummins engine, International Harvestor 4 cyl diesel engine, good condition ~~PRICE:~~ ~~$55,000~~ PRICE REDUCED: $45,000

BUCYRUS ERIE 60L (Ref#4530N) Deutz 5 cyl disel engine, casing strut, 40,000# blocks, mounted on 2-1/2 ton military truck, 800’ of new 7/8” drill line cable, 1300’ of new 7/16 sandline, loads of tools 6” – 8”, rig only drilled 15 wells since new Price: $70,000 - Florida

BUCYRUS ERIE 60L (Ref#5822N) Perkins diesel deck engine, mounted on 1978 GMC 6500 tandem axle truck with 427 V8 engine, new tires, new paint, 2 rear manual outriggers, 2500’ of ľ” drill line, 350’ of ľ” pull line, 2500’ of new 3/8” sandline, tooling: 2” tubing elevators, new bowl and slips, jars, rod elevators, 7” drill bits, 7” casing elevators and tools, 3” casing elevator, casing struts good condition Price: $65,000 - Kentucky

BUCYRUS ERIE 60L (Ref#13433) trailer mounted, tons of tools, Chrysler V8 Industrial propane engine, bullreel, sandline, casing line Price: $45,000 – Idaho

BUCYRUS ERIE 48L (Ref#15173) late 1950’s model, 6000’ drilling capacity, 7000’ service capacity, Cummins diesel deck engine, mounted on tandem axle trailer, tripod super heavy duty derrick, 300,000# casing load, some tools, stacked, needs to be cleaned and painted Price: ~~$110,000~~ PRICE REDUCED: $95,000 - Pennsylvania

BUCYRUS ERIE 36L (Ref#5027N) Manufactured 1950’s, skid mounted with 220 Cummins diesel engine, 3 line machine, 54’ mast, auxiliary mast, 5 ˝” – 12” tools, working daily Price: $40,000 - Ohio

BUCYRUS ERIE 36L (Ref#5265Nb) trailer mounted, Waukesha gas engine, 50’ mast, 3 line machine, all tools 4” to 6”, no leveling jacks Price: $60,000 Ohio

BUCYRUS ERIE 36L (Ref#8706Nc) trailer mounted, Waukesha gas engine, 6 line machine, 60’ mast, 1000’ of 1” drill line, no leveling jacks, no tools available Price: $50,000 Arizona

BUCYRUS ERIE 36L (Ref#863Na) Cummins diesel engine, 320 meters (1050’) drill line, 350 meters (1148’) sand line, 54’ mast, 1 stem 6” dia., rope socket, drill jar, *’, 12” and 15” bits, tool wrenches, circle jack, casing line Price: $85,000 – Costa Rica

BUCYRUS ERIE 36L (Ref#15424) Manufactured 1964, single axle trailer mounted with 250 Cummins engine, 3 line machine, rebuilt jack shaft, 54’ mast, good condition, tooling Price: $57,500 - Canada

BUCYRUS ERIE 29T (Ref#780N) trailer mounted, International gas engine, converted to 3 line machine, some tools, bits, stems, perforators, water tanks, fuel tanks - Nevada

Bucyrus Erie 24L (for parts)

Package price: $45,000

BUCYRUS ERIE 29T (Ref#13548) 4 cyl Cat deck engine, mounted on 1966 Reo 6 x 6 w/190 Cummins engine, hydraulic outriggers, catwalks, tools Off Market – New York

BUCYRUS ERIE 28L (Ref#6780N) Manufactured late 1960’s, Waukesha diesel deck engine, mounted on Mack 800 tandem axle truck with diesel engine, 3 line machine, 55’ mast, 3 sheave block, 400+’ of ľ” casing line, 4000’ of ľ” drill line, 2500’ of 7/16” sandline, 1 front & 2 rear hydraulic leveling jacks, tools available 4” up to 10”, currently drilling Price: $55,000 - Kentucky

BUCYRUS ERIE 28L (Ref#860N) 3 drums, mounted on White tandem axle truck with gasoline engine, 6 cyl John Deere disel engine on deck, 3000’ of ľ cable, spool of 2000’ of 7/8” cable, complete with all tools including 2 rope sockets, tool joint wrenches, stem, bits, bailer, rig runs good, truck is not highway worthy. Price: $35,000 - Utah

BUCYRUS ERIE 28L (Ref#13437N) trailer mounted, some tools, Price: $70,000 - Idaho

BUCYRUS ERIE 28L (Ref#8706Nb) Cat 4 cylinder diesel deck engine, mounted on 1970’s Ford with 351 gas engine, 6 line machine, 2000’ of new 7/8” drill line, 2000’ of new 9/16” bailer line, 1 front & 2 rear hydraulic leveling jacks, no tools available Price: $50,000 Arizona

BUCYRUS ERIE 28L COMBINATION ROTARY AND COMPLETION RIG (Ref#1059N) Drawworks with spudding beams, 12” Brewster rotary table, 1974 tri axlw all wheel drive with 6V53 Detroit, 180 Cummins deck engine, mechanical clutches, no pulldown, breakout tons, 4-1/2” x 38’ kelly, 7 slim hole collars 5” x 25’, 1500’ of 2-7/8” drill pipe, pipe trailer, 7-1/4 x 12” Oilwell mud pump (skid mounted) with Detroit V8 pwer, ~~Price~~~~: $175,000~~

PRICE REDUCED: $70,000

BUCYRUS ERIE 28L (Ref#4638N) trailer moutned, 135 Waukesha engine, 3 line machine, 2 mechanical jacks, Price: $48,500 - Kentucky

BUCYRUS ERIE 28L (Ref#9542) triple drum, powered by Waukesha engine (missing radiator), 6 line blocks, new 2,500’ drill line, new 2,500’ sandline, casing strut, trailer mounted Price: $35,000 - Oklahoma

BUCYRUS ERIE 28L (Ref#6997) Manufactured 1960's, Bradford special mast, trailer mounted, needs sandline, Waukesha engine, rebuilt motor, Price: $32,500 - Pennsylvania

BUCYRUS ERIE 28L (Ref#7951N) Manufactured 1960’s, trailer mounted, Ford Industrial gas engine, 3 line machine, 3 – 16” tools, drill bar, bits, stem, jars, Cameron block Price: $35,000 - Minnesota

BUCYRUS ERIE 27 (Ref#2577Na) Cummins 4BT deck engine, only 700 hours, mounted on 1979 GMC with 427 gas engine, 3 line machine, sand bucket, some tools, 1 joint of 22’ drill stem, no leveling jacks Price: $24,500 - Missouri

BUCYRUS ERIE 27T (Ref#9692) heavy duty rig, unmounted, Ford diesel deck engine, 3 line machine, some tools available, sitting several years Price: $15,000 – North Dakota

BUCYRUS ERIE 27T (Ref#12113) mounted on single axle Ford 1977 Price: $28,000 - Alabama

BUCYRUS ERIE 24L (Ref#7003N) 4 cylinder Perkins diesel deck engine, mounted on late 1960’s International tandem axle with Red Diamond gas engine, new winch line, 1800’ of new ľ” drill line, 1800’ of new ˝” sandline, 1 front & 2 rear screw jacks, tooled up for 4”, new hydraulics, new clutches, tubing power tongs, all gears good condition, currently drilling Price: $50,000 - Ohio

BUCYRUS ERIE 24L (Ref#3305N) Mounted on GMC with twin diesel screw engine, John Deere diesel on deck, 1000’ drill line, 2 rear leveling jacks, reinforced derrick (top & bottom).

Price: $40,000

tooling available at extra cost

BUCYRUS ERIE 24L (Ref#15325) 1 piece 42’ tubular constructed hydraulic derrick and leveling jacks, mounted on truck that needs to be replaced. Special design derrick to pull more than rig with 6-part line, cathead, no tools. Price with diesel engine in rig: $40,000 Price without engine: $30,000 – Minnesota

BUCYRUS ERIE 24L (Ref#3314N) trailer mounted, 4 cyl diesel engine (rebuilt), 2 line machine, 4” – 12” tools, good condition Price: $49,500 - Wisconsin

BUCYRUS ERIE 24L (Ref#7003N) Perkins 4 cyl diesel deck engine, mounted on Late 1960’s International tandem axle truck with Red Diamond gas engine, new winch line, 1800’ of new ˝” sandline, 1800’ of new ľ” drill line, 3 screw jacks, tooled for 4”, currently drilling Price: $39,500 - Ohio

BUCYRUS ERIE 24L (Ref#7055N) Manufactured 1958, trailer mounted with Cummins diesel engine, 3 line machine, 2 rear mechanical leveling jacks, no tools Price: $49,000 – Florida

BUCYRUS ERIE 24L (Ref#2460N) manufactured 1950’s, completely rebuilt 2007, new paint, trailer mounted, Geo 298 Hercules engine, 50’ derrick, casing struts and braces, 3 line machine, no cable, 1500’ depth capacity, 3000’ service capacity, excellent condition Price: $45,000 - Kentucky

BUCYRUS ERIE 24L (Ref#9183) Ford Industrial 6 cylinder engine, mounted on 1978 Ford 900 truck with gas engine, automatic transmission, hydraulic jacks front and rear, winchline, 2 lines, catheads, no tools Price: $35,500 – Ontario

BUCYRUS ERIE 24L (Ref#13806) 4 cyl propane deck engine, mounted on 10 wheeler 1975 Ford truck with gas engine, excellent condition for older rig, tools ~~Price~~~~: $35,000~~ Off Market

BUCYRUS ERIE 24W (Ref#1252Nb) gas deck engine, mounted on 1970 International w/gas engine, 3 line machine, 4 mechanical jacks Price: $29,000 – Connecticut

BUCYRUS ERIE 22W (Ref#573N) 4 cylinder Onan/Cummins diesel deck engine (low hours), 3 line machine, approximately 400’ of ľ” drill line, 3/8” sand line and 150’ no twist casing line, rope socket, 4-1/2” x 16’ drill stem, short stroke jars, button bit, breakout wrenches, drive clamps, mounted on 1954 GMC 6x6 army truck Price: $25,000 – New York

BUCYRUS ERIE 22W (Ref#2698Nc) diesel deck engine, 3 line machine, hydraulic outriggers, tools Price: $28,500

BUCYRUS ERIE 22W (Ref#5131N) Combination rotary rig, (2) deck engines (V60 Wisconsin & 6 cylinder Hercules) mounted on 1952 GMC 6x6 2 ˝ ton military truck with 302 gas engine, rebuilt 2x3 Mission mud pump, 3 line machine, set up for 6”, some tools Price: $45,000 - Michigan

BUCYRUS ERIE 22W ( Ref#8182N) rebuilt Red Seal Continental gas deck engine, mounted on 1998 International with DT466 engine, 3 line machine, 3 bailers, j wrenches, elevators, new bit, new stem, running rig, ready to go Price: $37,000 - Pennsylvania

BUCYRUS ERIE 22W (Ref#3134N) Buda gas deck engine, 3 line machine, mounted on 1976 Ford F700 (not 4x4) with gas engine, 1 stem, rope socket, 2 rear screw jacks, no tools Price: $27,500 - South Dakota

BUCYRUS ERIE 22W (Ref#9494Nb) Manufactured 1948, mounted on 1959 GMC truck with gas engine, sitting 5 years Price: $25,000 – North Dakota

BUCYRUS ERIE 22W (Ref#5129Na) mounted on 1989 Chevy truck, 3 line machine, fresh Continental power unit, 3 hydraulic leveling jacks, fresh paint, fully tooled Price: $40,000 - Indiana

BUCYRUS ERIE 22W (Ref#13987N) Ford 4 cylinder industrial gas deck engine, mounted on 1976 White with Cummins diesel engine, 3 line machine, fully tooled up for 6”, jars, sockets, bits, etc, many spare, 3 hydraulic leveling jacks, running rig Price: $35,000 - New York

BUCYRUS ERIE 22W SERIES II (Ref#83Na) mounted on 1991 Ford truck with diesel engine, 975’ of ľ” drill cable, excellent condition Price: $29,500 - Florida

BUCYRUS ERIE 22W (Ref#12487NA) series II, new Ford gas deck engine, 50’ hydraulically raised mast, mounted on 1991 International 4000 with diesel engine, drillers platform, 4 hydraulic leveling jacks Price: $90,000 - Michigan

Also available with:

Atlas Casing hammer (Ref#12487NB) $25,000

BUCYRUS ERIE 22W (Ref#2601N) 4 cylinder Waukesha gas deck engine, mounted on 1979 Ford F700 (not 4x4) with 370 gas engine, 3 line machine, running rig, auto braces, tooled up for 5” (some 4” tools avail) Price: $29,500 - West Virginia

BUCYRUS ERIE 22W (Ref#7249N) Series I, 4 cylinder Continental gas deck engine, mounted on 1967 Ford F700 single axle truck with 361 gas engine, 3 line mchine, 2 rear screw jacks, tooled up for 4”, currently drilling Price: $30,000 - Michigan

BUCYRUS ERIE 22W (Ref#12164Nd) Deutz diesel 4 cylinder deck engine, mounted on 1988 Autocar all wheel drive, 2 catheads, 900’ of new ľ” drill line, 900’ new 7/16” bail cable Price: $38,500 - Florida

BUCYRUS ERIE 22W (Ref#5998N) Manufactured 1953, Duetz 4 cylinder diesel deck engine, mounted on 1978 Chevy C65 tandem axle truck with 427 V8 gas engine, 3 line machine, new jack shaft, 800’ of new ľ” main line, 800’ new sandline, 5” 6” & 8” tools, hydraulic outriggers Price: $36,000

BUCYRUS ERIE 22W SERIES II (Ref#3078N) Manufactured 1970, mounted on 1969 Chevy C60, 6 cylinder Continental engine, PTO, 3 line machine, 3 hydraulic leveling jacks, cathead, 400’ of cable on sandline, 500’ main line, ready to drill PRICE: $27,500 Tools available at extra cost

BUCYRUS ERIE 22W (Ref#2643Na) Manufactured 1980, diesel deck engine, 3 lines, mounted on International with diesel engine, hydraulic derrick, hydraulic jacks, 20,000 miles on truck, no tooling Price: $37,500 – Pennsylvania

BUCYRUS ERIE 22W (Ref#7041Na) Deutz diesel deck engine, mounted on 1973 Brockway tandem axle truck with 318 Detroit engine, 3 line machine, ľ” drill line, ˝” casing line, 3/8” bailer line, no leveling jacks, good rubber Price: $32,500 – New York

BUCYRUS ERIE 22W (Ref#7041Nb) unmounted, gas engine Price: $16,000 – New York

BUCYRUS ERIE 22W (Ref#1790Nb) 3 line machine, Ford gas deck engine, mounted on 1980 Ford with gas engine, 1 front & 2 rear hydraulic leveling jacks, tooled up for 4” Price: $35,000 - Florida

BUCYRUS ERIE 22W SERIES I (Ref#1807Na) mounted on 1972 International truck, 3 lines, fully tooled, 400’ of cable, good running condition ~~Price~~~~: $22,500~~ OFF MARKET

BUCYRUS ERIE 22W SERIES II (Ref#1807Nb) mounted on 1979 International truck, 3 lines, fuly tooled, 400’ of cable, good running condition ~~Price~~~~: $29,000~~ – New York OFF MARKET

BUCYRUS ERIE 22W SERIES II (Ref#1524N) mounted on 1969 Chevy truck, Read Seal deck engine, set of 6” and 4” tools, rig sitting about 3 years Price: $45,000 - Missouri

BUCYRUS ERIE 22W SERIES II (Ref#2458Nb) rebuilt, 3 line machine, Ford 6 cyl diesel deck engine, mounted on 1988 GMC Topkick single axle with Cat 3208 engine, tooled up for 4” (6”-12” available), 3 hyd leveling jacks Price: $80,000 - Michigan

BUCYRUS ERIE 22W SERIES III (Ref#1807Nc) mounted on 1990 International with diesel engine, gas deck engine, 3 lines, fully tooled, 800’ of cable, 600’ of ľ” drill line, bailer, rope socket, good running condition Price: $31,000 – New York

BUCYRUS ERIE 22W SERIES I (Ref#863Nb) 60 hp diesel engine 3 cyl, Ford 4000, 114 meters (373’) drill line, 125 meters (410’) sand line, 32’ length mast, 1 stem 4-1/2” diameter, 1 rop sockets, 1 drilling jars, 6” and 8” bits, wrenches, casing line Price: $48,000 – Costa Rica

BUCYRUS ERIE 22W (Ref#2168N) Perkins diesel on deck, mounted o 1975 Chevy C65 truck with 366 gas engine, 500’ cable, needs new stem, new 2 x 3 button bit, 3 lines, 4 jacks, not used in 3 years, fishing tools,wrenches, 22” sub Price: $24,000 - Pennsylvania

BUCYRUS ERIE 22W (Ref#11614Nb) needs deck engine, 3 line machine, new cable, mounted on 1973 International 4400 single axle truck with gas engine, no tools Price: $22,000 - Ohio

BUCYRUS ERIE 22W (Ref#5087N) 3 line machine, 800’ new drill line, 800’ new sandline, Hercules gas deck engine, tooled for 4” (larger tools available), mounted on 1971 Ford truck with V8 gas, low miles, 2 rear mechanical jacks, 4” string of tools with long stem, long bailer and bit, good condition, ready to go Price: $35,000 - Michigan

BUCYRUS ERIE 22W (Ref#1421N) 3 line machine, Hercules gas deck engine, mounted on Chevy Kodiak truck with Cat 3208 engine, 5 x 2 transmission, 5 leveling jacks, currently drilling, very good condition Price: $29,500 – New York

BUCYRUS ERIE 22W (Ref#2465N) 3 cyl air cooled Lister diesel engine, mounted on 1975 Mack 6x6 truck with Cummins diesel engine, 3 line machine, 550’ sandline, 350’ drill line, 3 hyd leveling jacks, tooled up for 6”, currently drilling, ready to go Price: $46,000 – Pennsylvania

BUCYRUS ERIE 22W (Ref#5975N) Manufactured 1960, Continental gas deck engine, mounted on Army 6x6 with gas engine, 3 line machine, some tools for 6” & 8”, no leveling jacks Price: $23,500 - Pennsylvania

BUCYRUS ERIE 22W (Ref#291N) Manufactured 1960’s, International gas deck engine, mounted on International with DT466 diesel engine, 250-300 gallon water tank, toolboxes, fishing tools, wrenches, 6” & 8” tools, 3 mechanical leveling jacks Price: $49,000 - Canada

BUCYRUS ERIE 22W (Ref#4797N) Manufactured 1956, Hercules deck engine, mounted on 1978 Ford F700 truck with 370 gas engine, air brakes, 3 lines (new), 100’ casing line, 500’ drilling line, 500’ sandline, tooled for 6” Price: $19,500 – Wisconsin

BUCYRUS ERIE 22W SERIES I (Ref#248N) Manufactured 1959, mounted on 1976 White Roadboss truck, Ford 4 cyl Industrial engine, 3 line machine, brand new mainline, 600’ of cable, includes bucket of spare parts, new carbide bits 9-1/2” and 8”, 6” button bit, offset bit 5-1/2” flatfaced bit, rig in running condition Price: $35,000 – New York

BUCYRUS ERIE 20W (Ref#15045) Manufactured 1960’s, 3 line machine, new gas engine, needs to be remounted

BUCYRUS ERIE 22W (Ref#15045) Manufactured 1960’s, 3 line machine, needs some work Price for both rigs: $45,000 – North Carolina

BUCYRUS ERIE 22W (Ref#8059Na) trailer mounted, gas engine, 3 line machine, 2 rear mechanical jacks Price: $15,000 - Indiana

BUCYRUS ERIE 22W (Ref#8059Nb) 1946 Studebaker army truck, 6 cyl Hercules engine, 3 line machine, 2 rear mechanical jacks Price: $15,000 - Indiana

BUCYRUS ERIE 22W (Ref#8059Nc) unmounted, gas engine, 2 line machine (3^rd line available), Price: $13,500 – no tools - Indiana

BUCYRUS ERIE 22W (Ref#1252Nc) gas deck engine, mounted on 1987 Ford F700 truck with gas engine, 3 line machine, 4 m3chanical jacks Price: $45,000 - Connecticut

BUCYRUS ERIE 22W (Ref#14714) mounted on 1968 International truck, wrenches, leveling jacks, drill socket, 21 stem Price: $35,000 - Missouri

BUCYRUS ERIE 22W (Ref#6443Na) 6 cyl Continenetal gas/propane deck engine, 3 line machine, trailer mounted, 4 screw jacks, tooled for 8”, no tools included Price: $23,000 – Arizona

WALKER-NEER WS31 (Ref#6443Nb) trailer mounted, Continental Red Seal gas/propane engine, rebuilt, 2 rear mechanical jacks, no ools Price: $37,500 – Arizona

WALKER-NEER WS31 (Ref#6443Nc) Ford 300 Industrial gas/propane deck engine, mounted on Ford 8000 with Cat engine, 2 rear mechanical jacks, no tools Price: $35,000 - Arizona

BUCYRUS ERIE 22W (Ref#1800N) 300 Ford gas deck engine, 3 line machine, mounted on 1966 Ford single axle truck with gas engine, 2 rear screw jacks, fully tooled for 6”, bailer, bits, subs, etc. Price: $30,000 - Ohio

BUCYRUS ERIE 22W Series 2 (Ref#13998N) Mounted on 1977 International truck, new brakes 2007, Perkins diesel 85 hp engine, trailer landing gear jacks for leveling Price: $37,000 - Pennsylvania

BUCYRUS ERIE 22W (Ref#9616N) Manufactured 1960’s, mounted on 1978 tandem axle International truck with gas engine, 3 line machine, cathead, 6 cyl Continental engine on deck, Price: $29,500 - Florida

BUCYRUS ERIE 22W (Ref#1207N) diesel deck engine, mounted on International truck with diesel engine, complete package, tools, bits, etc. Price: $40,000 - Pennsylvania

BUCYRUS ERIE 22W (Ref#11345N) Manufactured 1962, mounted on International truck, powered by Hercules engine, 3 line machine, 600’ , new bailer, fully gone through, great condition Price: $55,000 tools at extra cost – New York

BUCYRUS ERIE 22W (ref#13372Nb) Ford 300 Industrial gas engine on deck, mounted on 1985 Ford 9000 truck with Cat 3208 engine, 4 hyd jacks, tooled for 6” tools Price: $27,500 – New York

BUCYRUE ERIE 22W (Ref#418N) Manufactured 1947, mounted on 1984 Ford truck, International gas engine, Ford engine in truck, 3 line machine, wrenches, misc bits Price: $18,500 - Wisconsin

BUCYRUS ERIE 22W SERIES II (Ref#10266Na) 3 line machine, mounted on 1987 International truck with gas engine, new brakes in Feb 07, Perkins diesel 85 hp deck engine, 4 manual leveling jacks, 6” tools. Price: $23,000 – Pennsylvania

BUCYRUS ERIE 22W (Ref#10771N) 6 cyl Ford Industrial gas deck engine, 3 line machine, mounted on 1978 Chevy truck, 600’ drill line, 600’ sandline, hydraulic leveling jacks, 4” and 6” tools Price: $39,500 - Michigan

BUCYRUS ERIE 22W (Ref#9348N) mounted on Series 2 Louisville Ford truck with gas engine, 6 cylinder Ford gas deck engine, 3-line machine, rig in good condition, truck is fair Price: $35,000 – West Virginia

BUCYRUS ERIE 22W (Ref#6185N) mounted on 1971 International 2600 truck, 649 gas engine in truck, 3 line machine, 4 cylinder Hercules motor runs drawworks, has braces (not automatic), 35’ derrick, stem, 6” and 8’ bits, bailer, wrenches Price: $25,000 – Pennsylvania

BUCYRUS ERIE 22W (Ref#818N) 6 cyl Continental gas deck engine, tooled for 6”, tools, bailer, drill bar, needs truck Price: $20,000 - Wisconsin

BUCYRUS ERIE 22W (Ref#9218N) Manufactured 1957, mounted on 1967 Army truck, all-wheel drive, diesel engine deck engine, diesel engine in truck, 6” drill tools, 3 line machine, recently painted Price: $52,500 – New York

BUCYRUS ERIE 22W COMBINATION CABLE TOOL/TOP HEAD (Ref#392Na) mounted on gooseneck trailer, 3 cylinder Deutz diesel engine (1000 hours since rebuild), top head rotary Sullair 750/150 air compressor, uses 3-1/2 x 10’ rods Price: $42,500 - Arizona

Also available 450/100 Gardner Denver compressor at extra cost.

BUCYRUS ERIE 22W (Ref#3627N) 3 line machine, International 4 cylinder gas deck engine (overhauled), mounted on 1969 International single axle truck w/345 gas engine, bailers, subs, etc., rock bits, 30’ mast, 4” – 10” tools, fishing tools, sitting one year, 2 rear manual leveling jacks Price: $35,000 – South Dakota

BUCYRUS ERIE 22W (Ref#239N) Manufactured 1960’s, mounted on 1996 GMC truck, 4 cylinder Continental deck engine, 3 line rig, platform tool box, chain bar, drive clamps, latch jack, fishing tools Price: $25,000 – New York

BUCYRUS ERIE 22W (Ref#13811Na) Mounted on 1960 Ford truck, Big Block engine, Propane runs truck and rig, hydraulic levelng jacks, standard mast, steel plates welded top to bottom, hydraulic breakout tools, 3 line machine ~~Price~~~~: $29,500 –~~ Arizona OFF MARKET

BUCYRUS ERIE 22W (Ref#594N) Manufactured 1950, mounted on 1967 Ford F700 truck with 330 gas engine, Ford 300 6 cylinder Industrial gas engine on deck, 4” and 6” tools, bits, subs, bailers, 3 line machine Price: $20,000 - Iowa

BUCYRUS ERIE 22W (Ref#3727N) 4 cyl Waukesha deck engine, mounted on 1969 Dodge cabover with 318 Chrysler gas engine, 6” and 8” drills, 5” x 17’ bailer, portable welder/gen., 200 gal water tank on wheels, good condition Price: $22,500 - Pennsylvania

BUCYRUS ERIE 22W (Ref#1212N) 1948, mounted on 1980 International truck, White deck engine, diesel engine in truck, 3 line machine, 500’ of sandline, 500’ of drill line, 100’ of sandline, 6” button bit, stem, bailer, extra tools at extra cost Price: $30,000 - Pennsylvania

BUCYRUS ERIE 22W (Ref#363N) Manufactured 1940’s, mounted on single axle Cabover Ford truck, 3208 diesel engine, rebuilt International engine has 200 hours, 10 speed Road Ranger, sandline, 4-line machine, drill line, pull line, bailing line, cathead on back, all new cable ~~Price~~~~: $35,000 –~~ New Jersey – OFF MARKET

BUCYRUS ERIE 22W (Ref#223N) Manufactured 1944, mounted on Mack truck w/Waukesha engine, auto braces, bailers, stems, jars, running condition Price: $22,500 - Ohio

BUCYRUS ERIE 22W (Ref#5740Nb) mounted on single axle International truck with gas, mechanical jacks, 3 line machine, hammers Make Offer – New York

BUCYRUS ERIE 22W (Ref#3922N) mounted on 1987 Ford 800 truck with 429 engine in truck, with air brakes, 91,000 miles, 2-speed rear end with lock, new Duetz diesel motor in drilling rig – Dorx Motor, 1,000’ of new drilling line, 1,000’ of new sand line, 7’ x 7’ platform built on drilling rig. Miller welder with 150’ lines Price for rig only: $45,000 - Ohio

Tools available at additional cost:

New stem

New rope socket 5” stinger

Bailer 5” drive clamps

Latch jack 5”

5” long stroke jars and 5” regular jars

Friction socket

10” bit, 8” bits, 5” bits

2 prong spear

Bumper 5”

5” wrench set

New Jack shaft

New front tire

Wireline knife

Package Price: $44,000

BUCYRUS ERIE 22W SERIES I (Ref#1097N) Manufactured 1958, mounted on 1992 Ford truck with 7.0 gas engine, 3 line machine, 6” string of tools, extra stem w/set of jars, combo socket fishing tools, 5” bailer, jar bumper, 3-1/2” wrenches, H Fromhel stationary deck engine, great condition, currently drilling Price: $35,000 - IN

BUCYRUS ERIE 22W SERIES II (Ref#15431) Manufactured 1970’s, mounted on 1965 International tandem axle truck, GM 671 engine, cable winch, 4 hydraulic outriggers, sand pump, turbo lift sub, open face rope socket, 1250# drill string, bits, stems Price: $40,000 - Alaska

BUCYRUS ERIE 22W SERIES II (Ref#14939) mounted on 1975 International truck, PTO driven, hyd jacks, 6 cyl Cont engine, good condition Off Market

BUCYRUS ERIE 22W SERIES II (Ref#14919) Continental Red Seal propane engine, mounted on 1979 GMC 6000 truck Price: $28,000 - Illinois

BUCYRUS ERIE 22W SERIES II (Ref#12573) Ford 317 gas deck engine, mounted on Military 6 x 6 w/Continental gas engine, 3 line machine, hydraulic jacks, bailer, button bit and winged sub, 6”, 8”, 10” and 12” bits, many extras, fully tools OFF MARKET Also available at extra cost: Holte extractor, used only twice, excellent condition

BUCYRUS ERIE 22W (Ref#193N) mounted on Ford 750 truck, Ford gas engine, diesel deck engine, hydraulic jacks, 3 line machine, 8” bits, 6” button bits, subs, bailers, has been sitting for 5 years - PA

BUCYRUS ERIE 22W (Ref#4367N) 3 line machine, cathead, new Continental gas deck engine (very low hours), mounted on 1987 GMC single axle truck with 427 gas engine, telescoping mast, automatic braces, rope socket, some bits and tools, toolbox, catwalks, 2 rear mechanical jacks, 450’ of 5/8” drill line, 450’ sandline, drills daily Price: $34,500 – Wisconsin

BUCYRUS ERIE 22W (Ref#15168) 6 cyl Ford gas deck engine, mounted on 1974 International truck with gas engine, 3 line machine, drill bars, new rope socket, (2) 6” bits, (1) 8” bit, wrenches, all tools, good condition, currently drilling Price: $29,500 - Texas

BUCYRUS ERIE 22W (Ref#12982) 3 line, diesel engine on deck, mounted on 1965 MackB61 truck with diesel engine, new jackshaft, lots of tools Price for rig only: $31,000 Price for rig and tools: $40,000

Grount machine, 1979 GMC 2-ton service truck, with Detroit engine, welder, water tank Package Price: $57,500

OFF MARKET

BUCYRUS ERIE 22W SERIES III (Ref#12425) Manufactured 1974, fully reconditioned, stored inside (one owner rig), 4 cyl Continental diesel deck engine, mounted on 1972 Ford F600 w/370 gas engine, new tires, hydraulic leveling jacks: 2 rear, 2 center, 1 front, good condition Price: $65,000 – North Carolina

BUCYRUS ERIE 22W (Ref#12428) Manufactured 1950, 3 line cable tool rig, fully reconditioned including shafts, bushings, bearings, clutches, etc. (only 6 wells since), ľ” cable, stiff legs powered by Perkins 4 cyl diesel engine on deck, mounted on 1977 GMC 6500 with gas engine, 6” tools, 8” sub, 2-1/4” and 3-1/4” button bits, bailers for 6” and 4” wells, many extras, stored inside, good condition Price: $50,000 – Rhode Island

Parts rig also available

BUCYRUS ERIE 22W (Ref#12421) 3 line rig, 5 cyl Duetz diesel deck engine, rig not mounted, new clutches, jackshaft etc., rope sockets, complete 4” and 5” tools, extra casing, good condition Price: $34,500 - OH

BUCYRUS ERIE 22W (Ref#12184) Manufactured 1970’s, completely rebuilt 2000, 4 cyl Ford Industrial gas engine on deck (rebuilt), mounted on 1963 GMC truck with gas engine, new crowd, jack shaft, etc., 3 line machine, main line, sandline, casing line, cathead with rope, basic tooling, jars, bailers, bits, etc, good condition Price: $40,000 – California

BUCYRUS ERIE 22W (Ref#11984) 3-line, International 4 cyl gas deck engine, mounted on 1972 GMC single axle truck w/V-8 350 hp motor, good condition, currently drilling, lots of tools Price: $32,000 - Arkansas

BUCYRUS ERIE 22W (Ref#10680) Manufactured 1970’s, 2 line machine, 360 gas deck engine, mounted on 1970 Dodge truck (50,000 miles), Red seal power unit, stem, bailer, cables, 3 hydraulic leveling jacks (2 rear, 1 front), excellent condition, currently drilling Price: $29,500 - NY

BUCYRUS ERIE 22W (Ref#10339) Perkins diesel deck engine, mounted on GMC single axle truck w/366 gas engine, good condition, currently working Price: $29,500 - Michigan

If new jackshaft installed and remounted on newer truck: $49,500

BUCYRUS ERIE 22W (Ref#10267) manufactured late 1950’s, White 4 cylinder gas deck engine, 3 line machine, outriggers, 36’ mast, mounted on International Paystar with Cat 3208 diesel engine, Price: $30,000 - PA

BUCYRUS ERIE 22W (Ref#9616) continental 6 cylinder gas engine, mounted on 1971 International 2-ton truck tandem axle with gas engine, tools Price: $24,500 - Florida

BUCYRUS ERIE 22W (Ref#9189) 1961, Park diesel engine, 40’ derrick, catwalks all around, mounted on 1973 2-ton Chevy Price: $30,000 - Kentucky

BUCYRUS ERIE 22W (Ref#7656) 3 drum rig, 6 cylinder Continental gas engine on deck, mounted on 1971 GMC single axle truck with gasoline engine, drill stem guard, 35' mast with mast braces, some 6" tools Price: $26,500 - Vermont

BUCYRUS ERIE 22W (Ref#7628) 3 line rig, 4 cyl Cummins diesel rig engine (low hours), 6" and 8" tools, mounted on GMC army 6x6, good condition Off Market

BUCYRUS ERIE 22W (Ref#7569) Manufactured 1966, mounted on International truck (2 axles), 3 hydraulic jacks, sandblasted and painted, good condition, ready to drill Price: $32,000 - Canada

BUCYRUS ERIE 22W (Ref#5573) Manufactured 1950’s, 3 lines, mounted on 1962 Chevy 2-ton with gas, tooling Price: $27,500 - Idaho

BUCYRUS ERIE 22W (Ref#5596) Manufactured 1958, 3 lines, 6 cyl Hercules on deck (rebuilt), 40’ derrick, Mounted on Mack B42 with gas - Pennsylvania

BUCYRUS ERIE 22W (Ref#5844) Manufactured 1940, 6 cyl gas, mounted on 1983 Ford F800 w/gas engine, tooling, bits, J-wrenches Price: $37,500 – New Mexico

WELLMASTER 1250 (Canadian made, similar to 22W) (Ref#20N) Continental inline 6 gas deck engine, mounted on 2000 GMC 6500 truck with 454 gas engine, 3 line machine, 4” tools, bits, bailers, subs, 5” and 6” tools, etc Price: $50,000 - Michigan

Also available: 600’ drill line, 600’ sandline, casig reel, 3 leveling jacks

BUCYRUS ERIE 22W (Ref#8588) – West Virginia

BUCYRUS ERIE 21W (Ref#9691) mounted on 1966 Chevy truck, Chevy 6 cylinder deck engine, V8 gas in truck, 3 line machine, some tools available, sitting several years Price: $15,500 – North Dakota

BUCYRUS ERIE 21W (Ref#1465N) 2 cyl Duetz diesel deck engine, mounted on 1988 International 1900 truck with 466 Detroit engine, Allison automatic transmission, 2 line machine, 500’ of “like new” 5/8” drill line, 500’ of sandline, 1 front 2 rear mechanical jacks, fully tooled for 4”, ready to drill Price: $29,500 - Florida

BUCYRUS ERIE 21W (Ref#5740Na) mounted on single axle Ford truck with gas engine, mechanical jacks, Price on Request – New York

BUCYRUS ERIE 21W (ref#13410) Manufactured 1948, mounted on skid, tools for 3-4” wells Price on Request - Canada

BUCYRUS ERIE 21W (Ref#13474) mounted on 1966 Chevy C10 truck with 6 cyl gas engine, good operating condition Price: $35,000 – Minnesota

BUCYRUS ERIE 20W (Ref#9044Na) Waukesha gas deck engine, 3 line machine, mounted on International with gas engine (truck is bad) 2 rear mechanical leveling jacks, tooled up for 6”, ready to go Price: $22,000 - located Wisconsin

BUCYRUS ERIE 20W (Ref#1986Nb) Manufactured 1955, Ford 4 cylinder gas deck engine, mounted on 1990 Ford F700 with 429 gas engine, 3 line machine, bullreel, casing reel, cathead, 1 front & 2 rear hydraulic leveling jacks, some tools

Price on request Michigan

BUCYRUS ERIE 20W (Ref#5679N) 3 line machine, Ford 4 cylinder industrial gas deck engine, mounted on 1989 Ford F700 (not 4x4) with diesel engine, 2 rear manual jacks, tooled up for 4”, extra bailer, extra tools, currently drilling Price: $29,500 – Florida

BUCYRUS ERIE 20W (Ref#5029N) Series II, Ford 4 cylinder industrial gas engine, mounted on 1975 International 4 wheel drive with 345 gas engine, all new jack shaft, bearings, bushings, etc, 3 line machine, no leveling jacks, no tools Price: $30,000 – Ohio

BUCYRUS ERIE 20W (Ref#4007N) Manufactured 1983, 4 cyl Ford gas on deck, 2 lines, mounted on 1983 Ford F600 truck with 370 gas engine, 500’ of 5/8” cable, 2 rear jacks, no tooling Price: $25,000

BUCYRUS ERIE 20W (Ref#6355N) Manufactured 1950’s, gas/propane deck engine, mounted on 1964 Ford F600 with gas engine, 3 line machine, catwalks, hydraulic leveling jacks, fully tooled, ready to go Price: $24,000 Arkansas

BUCYRUS ERIE 20W (Ref#135N) 4 cylinder gas deck engine, mounted on International with diesel engine, new rope socket Price on Request Virginia

BUCYRUS ERIE 20W (Ref#2946N) gas deck engine, mounted on ’55 Chevy with gas engine, 3 line machine, 6” tools, 1 front hydraulic leveling jack, 2 rear mechanical jacks Price: $22,500 Montana

BUCYRUS ERIE 20W (Ref#5724N) Manufactured 1979, White gas deck engine, mounted on 1964 Chevy with V8 gas engine, 3 line machine, cathead, tooled up for 4” 5” & 6”, 2 rear manual jacks, stored inside Price: $35,500 - Florida

BUCYRUS ERIE 20W (Ref#8009N) Ford 4 cylinder gas deck engine, mounted on 1974 International 1800 with 345 gas engine, 3 line machine, 4” 6” & 8” tools, 2 rear mechanical leveling jacks Price: $20,000 - Minnesota

BUCYRUS ERIE 20W (Ref#6429N) International 172 industrial gas deck engine, mounted on 1972 Ford F600 4x4 with 330 gas engine, 3 line machine, tooled up for 6”, no leveling jacks, stored inside, mud box, button bits Price: $22,500

BUCYRUS ERIE 20W (Ref#6132N) rebuilt Ford 4 cylinder deck engine, mounted on 1987 Chevy with turbo diesel engine, 3 line machine, 300’ of 5/8” cable, (2) new bits, bailer, Hobart welder & generator, cutting torches, 2 rear mechanical jacks, tooled up for 4”, extra 500’ of brand new 5/8” cable Price: $27,500 - Florida

BUCYRUS ERIE 20W (Ref#15042N) Manufactured 1976, mounted on Chevy C70, Ford 4 cylinder gas industrial engine, 3 line machine, some tooling, top of mast needs to be straigtened Price: $25,000 – Ohio

BUCYRUS ERIE 20W (Ref#2823Nb) Deutz diesel deck engine, mounted on 1976 Ford F750 (not 4x4) with 370 gas engine, stored inside, 3 line machine, all new lines Price: $25,000 – New York

BUCYRUS ERIE 20W (Ref#2380N) Manufactured 1972, Perkins 4 cylinder diesel deck engine, only 100 hours on rebuild, mounted on ’72 Ford F650 single axle truck with gas engine, 42’ telescoping derrick, 3 line machine, 1 front 2 rear mechanical leveling jacks, 6” tools Price: $28,000 - Montana

BUCYRUS ERIE 20W (Ref#106N) Ford Industrial gas/propane deck engine, mounted on 1969 Chevy C50 truck with 350 gas engine, 3 line machine, 6” tools, 3 manual jacks, bailer, 400’ sandline, 500’ drillline, 150’ casing line Price: $27,500 - Georgia

BUCYRUS ERIE 20W (Ref#2981Na) Rebuilt 2006, only 1529 hours since rebuild, new bushings, bearings, jackshaft, etc., Cat 4 cyl diesel deck engine, mounted on 1987 International 1900 single axle truck with diesel engine, 3 line machine, 2 rear screw jacks, 300’ of 5/8” cable, fully tooled, jars, stem, rope socket, bailer, 4” rock bit, wrenches, etc., good condition, currently drilling Price: $40,000 – Florida

BUCYRUS ERIE 20W (Ref#2981Nb) 4 cylinder Cat diesel deck engine, mounted on 1991 Internation 4900 truck with diesel engine, only 1500 hours since rebuild, 4” toos Price: $40,000 – Florida

BUCYRUS ERIE 20W (Ref#2981Nc) 4 cyl Cat diesel deck engine, mounted on 1984 Ford F700 truck with V8 gas engine, only 17 hours since rebuild 2009, 4” tools Price: $65,000 - Florida

BUCYRUS ERIE 20W (Ref#5122N) gas deck engine, mounted on Chevy truck with V8 gas engine, 3 line machine, tooled for 4”, 6” and 8”, 3 hyd leveling jacks Price: $37,500 - Michigan

BUCYRUS ERIE 20W (Ref#4829N) Manufactured 1950’s, Hercules 5 cyl on deck, mounted on 1973 Chevy 60 gas engine, 3 lines, 500’ drilling line, 300’ sandline, 100’ casing line, hydraulic outriggers, well maintained Price: $21,500 - Wisconsin

BUCYRUS ERIE 20W (Ref#10480N) gas deck engine (needs work), mounted on 1982 International with gas engine, 3 line machine, bailer, bits, etc., tooled for 4”, 2 rear mechanical leveling jacks Price: $28,500 - Kansas

BUCYRUS ERIE 20W (Ref663N) 2 available, refurbished, new bushings, crowns reworked, 3 lines

a. mounted on 1996 Ford 700 seriesw with diesel engine, truck in excellent condition, flotation tires, rig completely disassembled and rebuilt 2007, new jack shaft (twin disc), crown rebuilt and rebushed, rebushed all major components, cable replaced, land gear crank jacks, new 350 gallon wter tank, toolbox, mast has new pulleys, cable and bushings, pony motor Ford 6 cyl Industrial Price: $38,000

b. mounted on 1985 Chevy, rig completely rebuilt 2006, new jack shaft (twin disc), top crown rebuilt and rebushed, new cable, mast disassembled with new pulleys and cables, new 350 gallon water tank, new 4 cyl diesel engine, 3 crank landing gear type leveling jacks, toolbox, brand new spare 4 cyl diesel engine Price: $36,000

4” tools, bits, bailer, stems

Florida

BUCYRUS ERIE 20W (Ref#157N) 4 cyl engine on deck, mounted on 1974 Chevy 650 truck with 350 gas engine, 3 line machine, new jack shafts, new clutches, new bearings, 4” tools ~~Price~~~~: $39,500~~ – Florida OFF MARKET

BUCYRUS ERIE 20W (Ref#12653Nb) Mounted on old Chevy truck, 3 line machine, fully tooled Price: $29,500 - Montana

BUCYRUS ERIE 20W (Ref#11965N) Manufactured 1977, mounted on 1973 Chevy 2 ton truck, Ford diesel deck engine, Chevy 350 truck entine, 3 line machine, 500’ of cable, drill bar, wrenches Make Offer - Wisconsin

BUCYRUS ERIE 20W (Ref#2544N) 1972, 3 lines, Waukesha 4 cyl deck engine, 1984 GMC truck with V8 350 engine (needs brakes), 4” and 6” tools, good shape Price: $20,000 – New York

BUCYRUS ERIE 20W (Ref#7173N) 3 line machine, Red Seal gas deck engine, mounted on 1981 Chevrolet single axle 350 Chevy truck with gas engine, some tools, drill bar, rope socket, subs, new bailer, wrenches, 4 hyd jacks, 36’ mast, completely rebuilt Price: $50,000 - Connecticut

BUCYRUS ERIE 20W (Ref#4056N) combination cable and tophead, 6 cyl Ford Industrial gas deck engine, mounted on GMC 10 WHEEL 5 STAR General with all wheel drive with 6V92 Detroit engine, 32’ derrick, 3 line machine, sandline, 2” double diaphragm mud pump, 6” tools, 500’ of 5/8” cable, 3 hydraulic leveling jacks Price: $50,000 - florida

BUCYRUS ERIE 20W (Ref#12923Nb) Hercules 5 cyl gas deck engine, tooled for 4”, mounted on truck (needs replacing) Price: $20,000 - Wisconsin

BUCYRUS ERIE 20W (Ref#10362N) Manufactured 1954, 3-line machine, also includes an additional rig for parts, fishing tools, jars Price: $27,000 – North Carolina

BUCYRUS ERIE 20W (Ref#7045Na) 3 line machine, Ford gas deck engine, mounted on 1970 International single axle truck with V6 gas engine, 1 front manual jack, 500’ of 5/8 cable, all tools Price: $20,000 – New York

BUCYRUS ERIE 20W (Ref#15465) Manufactured Mid 1970’s, mounted on 1979 Ford 2-ton truck, Detroit diesel engine, fully tooled, no drill pipe, Price: $19,500 - Virginia

BUCYRUS ERIE 20W (Ref#15518) Manufactured 1970’s, mounted on 1979 International 4 cyl Continenetal engine, just overhauled, 2 x 3 stem, 5” bailer, 5” rock bit, drive clamps Price: $22,000 - Ohio

BUCYRUS ERIE 20W (Ref#15440) 3 line all new bushings, new jackshaft gear, new clutch discs, hyd jacks, mast raises hydraulically, drillng in 20minutes, mounted on Ford truck with Cat diesel engine, Allison auto transmission, new bailer rope socket, 600’ of cable and tool guide, Hercules power unit Price: $39,500 - Tennessee

BUCYRUS ERIE 20W (Ref#15350) 4 cyl Waukesha engine, mounted on 1974 International truck with gas engine, 6”, 8” and 10” tools, bailers, drive clamps, etc., ready to work Price: $29,500 - Oregon

BUCYRUS ERIE 20W (Ref#14027) gas deck engine, mounted on 1961 International truck w/gas engine, tooled for 2” work Price: 14,500 - Indiana

BUCYRUS ERIE 20W (Ref#14995) Manufactured 1960’s, mounted on 1987 Chevy truck, 4”, 5” and 6” bits, bailes, 6 x 6” perforater, some misc tools Price: $30,000 - Illinois

BUCYRUS ERIE 20W (Ref#13164) 3 line machine, hydraulic jacks, fully tooled Price on Request – New Hampshire

BUCYRUS ERIE 20W (Ref#13150) 4 cyl Hercules gas deck engine, mounted on 1987 GMC single axle truck with 366 gas engine, brand new top head, all new bushings, etc., stem and bailer, 500’ of 5/8” drill line (new) 500’ 3/8” sandline (new), 250 gal water tank, freshly steam cleaned and painted, good condition, currently drilling Price: $35,000 – West Virginia

BUCYRUS ERIE 20W (Ref#13258) mounted on 2 ton International truck w/4 cyl engine, 3 line machine, 4” tools with jars, wrenches, drive clamps, drop over drive head Price on Request - Florida

BUCYRUS ERIE 20W (Ref#11803) gasoline engine on deck, mounted on 1972 International single axle truck w/gas engine, 3 drums, tooled for 4” and 6” holes Price: $22,000 – North Carolina

BUCYRUS ERIE 20W (Ref#6428) Hercules Industrial deck engine with Rockford clutch, 3 line machine, new cable, no truck, bar rig, 500’ new dril line, 2 stems (1 new), jars, sockets, Price: $14,000 – New York

BUCYRUS ERIE 20W (Ref#9358) mounted on 1986 C60 Chevy, hyd jacks, currently working Price: $25,000 - Florida

BUCYRUS ERIE 20W (Ref#5908) Late 60’s, 4 wheel drive 1971 International truck Price: $20,000 - Florida

BUCYRUS ERIE 20W (Ref#7766) Manufactured 1960’s, new power unit, mounted on Chevy truck (not roadworthy) Price: $32,000 – North Carolina

BUCYRUS ERIE 20W (Ref#382N) Hercules gas deck engine, mounted on Ford Tilt-Cab with 390 gas, 3 line machine, 2 rear hydraulic jacks, tooled for 4”, sitting 6 years Price: $19,500 - Michigan

BUCYRUS ERIE 20W (Ref#1909Nb) Manufactured 1957, mounted on 1979 Ford F600 truck, 3 line machine, Deutz 2 cylinder air cooled diesel deck engine, 800’ sandline, 700’ of 5/8” cable, new leveling jacks, good running condition Price: $24,000 – New York

SHOP BUILT TOPHEAD DRIVE/CABLE TOOL (20W) COMBINATION RIG (Ref#2012Na) Cummins deck engine, mounted on 1986 Ford L9000 with Cummins engine, 4 x 4 Mission magnum mud pump, 185 CFM air compressr, 360’ pipe Price: $60,000

SHOP BUILT COMBINATION TOPHEAD/CABLE TOOL RIG (Ref#2012Na) Cummins deck engine, mounted on 1986 Ford L9000 with Cummins engine, Bucyrus Erie 20W, 185 CFM air compressor, 360’ pipe Price: $60,000

BUCYRUS ERIE 1W (Ref#8068N) trailer mounted, gas engine, 2 line machine, 3 hyd jacks, some tools, includes parts rig Price: $20,000 - Florida

BUCYRUS ERIE 1W (Ref#12427Nb) mounted on 1988 Chevy 1 ton truck, tooled for 4” Price: $16,000 - Indiana

BUCYRUS ERIE 1W (Ref#564N) Manufactured 1955, mounted on 1986 Ford F700 truck, rebuilt jackshaft, 300’ new cable (never used), 2”, 3” and 4” tools, bits, drill jars, needs paint Price on Request – Michigan

IDECO #10 (Ref#9146) 3 line cable well drilling machine, 4”, 6” and 8” tooling, powered by 4 cyl Continental, excellent condition, mounted on 1973 International truck Price: $18,500 - MIssouri

IDECO T16 (Ref#14657) gas deck engine, mounted on 1971 International 1800 with gas engine, 3 line machine, bailer, mechanical clutches, 3 hyd leveling jacks, tools, 400’ of 3/4'” cable Price: $22,000 - Maine

CYCLONE 44 WORKOVER/CABLE COMBO RIG (Ref#15051N) Manufactured 1965 – Retrofit 2009, fully loaded with hydraulic and air controls, 60’ square tube hydraulic mast, V8 diesel engine, stem, bailer, rop sockets, good running condition, engine just overhauled, low hours, no pipe Price: $140,000

CYCLONE 44R (Ref#1509), Manufactured 1970 - combination mud rotary and cable rig, Ford 6 cylinder gasoline engine on deck, 5 x 6 GD duplex mud pump, 34' mast, 3 hydraulic leveling jacks, Mounted on tandem axle truck, Diamond Reo powered by Cummins 220 diesel engine, 3" x 24' kelly, 2-3/8" x 20' drill pipe, 13'H x 8'W x 34'L, handling equipment, table bushings, tools Price: $45,000 – New Jersey

CYCLONE 44 COMBINATION CABLE TOOL/KELLY (Ref#12164Na) combination rig, diesel deck engine, mounted on 1967 Mack tandem axle truck with diesel engine, 8” retractable table, 4 ˝” x 23’ Kelly, hydraulic pulldown, mechanical clutches, no mud pump, water injection, breakout tongs, 600 CFM air compressor, 300+’ of 2-7/8 IF 15’ drill pipe, 1 front 2 rear hydraulic leveling jacks, new tires, currently drilling Price: $55,000

CYCLONE 44R COMBINATION CABLE/KELLY RIG (Ref#3107N) Manufactured 1966, mounted on 1967 Mack Truck, LeRoi air compressor, Cuumins 210 deck engine, Ford engine runs cable tool, 625’ pipe, set up to drill, good condition Price: $37,500 – New York

CYCLONE 43R COMBINATION CABLE/KELLY (Ref#4485) 12” x 600’ capacity, Mounted on tandem axle Mack truck, 4 x 5 GD mud pump, 38’ mast, 6 cyl gas Ford 300 engine runs drawworks and pump, Large rotary table, hydraulic leveling jacks Price to be determined – New York

CYCLONE 43 (Ref#490N) Manufactured 1968, mounted on Army truck (needs to be remounted), 12” bit, 8” bit, 6” button bit, 3 line machine, drill stem, 2 hydraulic dylinders, rig has been sitting two years Price: $28,000

CYCLONE 42 (Ref#5089N) cable toolonly, gas deck engine, mounted on 1979 International single axle truck with gas engine, 3 line machine, 3” tools Price on Request - Michigan

CYCLONE 42 (Ref#6051N) Ford 6 cyl industrial gas deck engine, 42’ mast, mounted on International single axle truck with gas engine, 3 line machine, 1000’ of ľ” drill line, jars, fishing tools, 2 rear mechanical jacks, can be tooled up for 4” to 12”, currently drilling Price: $35,000 - New Mexico

CYCLONE 42 (Ref#14416) 4 cyl Red Seal gas deck engine, 2 line machine, 42’ mast, set up for 6”, mounted on 1972 Ford F8000 truck with Cat 1160 diesel engine, 4 jacks, bailer, handling tools, 700’ of new 5/8” drill line, 700’ of new sandline, good condition Price: $27,500 – New York

CYCLONE 42 (Ref#15276) manufactured 1940’s, mounted on 1990 Chevy gas engine, new 4 cyl International engine on deck, hammer bailer, 3^rd line, 300-500’ cable on drill line, same on bailer, new stem, jars, fishing equipment, 6 – 6-1/4” tools, currently drilling Price: $29,500 - Pennsylvania

CYCLONE 36R COMBINATION CABLE/KELLY RIG (Ref#12092) Manufactured 1970’s 453 Detroit diesel deck engine, mounted on 1977 Ford 900 tandem axle truck with 290 Cummins diesel engine, LeRoi air compressor, 3-1/8” fluted kelly, 8-1/2” retractable table, 10 gpm hydraulic water injection, stabilizer, bit, breakout wrench, good condition 200’ of 3-1/2” flush rod, tooling Price: $~~70,000~~ – Ohio OFF MARKET

CYCLONE 36R COMBINATION CABLE/KELLY RIG (Ref#104N) 4 cyl Industrial Ford deck engine, 8” retractable table, mud pit, mounted on 1978 International all wheel drive truck with DT466 engine, 415’ Mayhew Jr pipe, 3” diaphragm mud pump, 375/125 trailer mounted Sullair compressor, 1000 gal water tank on rig Price: $50,000

CYCLONE 36R (Ref#3980N) combination cable/Kelly rig, manufactured 1960’s, (2) Ford gas deck engines, mounted on 1987 Freightliner with Cat engine, 3x4 Mission mud pump, 18’ Kelly, 5 Ľ” retractable table, hydraulic pulldown, mechanical clutches, mud pit, cone desander, 200’ of 2 7/8” x 15’ drill pipe, breakout wrench, hydraulic leveling jacks, 4” & 6” cable tools Price: $40,000

CYCLONE 36R COMBINATION CABLE TOOL/KELLY (Ref#6274Nb) no mud or air, Continental gas deck engine, mounted on Chevy with gas, square kelly Price: $24,000 - Michigan

CYCLONE 36R (Ref#773N) Manufactured 1970, mounted on 6 x 6 Military truck, Detroit 6V92 diesel engine, 3 line machine, 5 speed overdrive, hydraulic pulldown, 600’ cable, grout pump, running condition POR

BUCYRUS ERIE 36R (Ref#1570N) Ford 4 cylinder industrial propane deck engine, mounted on 76 Mack with 235 Cummins engine, Leroi 100 2 stage compressor, 3-line machine, breakout wrench, 30’ mast, Hydro water injection pump, bailer, blocks, tools, etc., Miller welder, rebuilt turntable, 345’ of 15’ x 2 7/8” IF drill pipe, Price: $30,000 - Washington

CYCLONE 36 CABLE TOOL RIG (Ref#4354N) Continental gas deck engine, mounted on 1986 Ford F600 truck (not 4x4) with gas engine, 3 line machine, 2 rear screw jacks, some tools Price: $25,000

CYCLONE 36 (Ref#2455N) Manufactured 1976, gas engine on deck, mounted on International 4-wheel drive with gas engine, 3 hyd jacks, drill stem, bailer, rebuilt from bottom to top Price: $55,000 - Pennsylvania

CYCLONE 36R COMBINATION RIG (Ref#11157) 2 Ford Industrial engines (one runs rig and one runs pump), mounted on 1964 International tandem truck with 220 Cummins, 5-1/2 x 6 Gardner Denver pump, 18’ kelly, 5-1/4” retractable table, 2” swivel, 4” spudder tools, 375 gal attached swing-up mud pan, 180’ of Mayhew regular pipe Price: 47,500 - Indiana

CYCLONE 36 CABLE TOOL/AUGER COMBINATION RIG (Ref#1576N) diesel deck engine,mounted on 6 x 6 Army truck with Mack diesel engine, 2 catheads, sandline, 3 hyd leveling jacks, tools and augers included Price: $50,000

- Ohio

CYCLONE 36/TH60 (Ref#13621N) 50 SDS LeRoi compressor, 3 x 4 Mission mud pump, mounted on 1972 Dodge 800 truck with 225 hp Cummins engine, PTO, no pipe, good condition Price: $85,000

CYCLONE 36 / TH60 TOPHEAD/ROTARY COMBINATION (Ref#6695N) Manufactured 1973, 2 deck engines: Ford 4 cyl diesel, Detroit 6V71 diesel, mounted on 1990 International Paystar w/350 Cummins engine, 600/100 LeRoi air compressor, 8 gpm water injection, breakout wrench, 3 hyd leveling jacks, stabilizer, 400’ of 4-1/2” x 20’ drill pipe (2-7/8 IF conn), good condition, currently drilling Price: $60,000

INGERSOLL RAND TH60/CYCLONE 36 COMBO RIG (Ref#3110N) mounted on 1973 Ford F8000 truck, Cat diesel engine, 5 x 6 mud pump, 50 SDS air compressor, PTO, no carousel, rod rack, water injection, 300’ drill pipe, good condition, one owner machine, stored inside Price: $60,000

INGERSOLL RAND TH60/CYCLONE 36 (Ref#15015) Manufactured 1973, developmental air compressor, 3 x 4 mud pump, mounted on Paystar 5000 6x6 truck with Cat 3208T engine, air brakes, 13 speed transmission, breakout wrench, water injection, excellent condition, currently drilling, new hydrostatic, new swivel, new tophead, 3 leveling jacks, 250’ of 3-1/2” x 20’ drill pipe ~~Price~~~~: $80,000~~ OFF MARKET - Ohio

INGERSOLL RAND TH60 / CYCLONE 36 CABLE RIG COMBO (Ref#9325) Rotary/spudder, Manufactured 1969, 6 cyl compressor, Gardner Denver 5 x 6 mud pump, mounted on 1969 Dodge tandem axle truck with gasoline engine, Ford diesel on mud pump and air compressor, Ford gasoline on rig, 5” pullback cylinder, drilled to 500’ with 3” rod, 4” cable tool stem 15, 100’ rods, 15’ stabilizer, 400-500’ cable on bailer, Price: $30,000

CYCLONE TH35/50 COMBINATION TOP HEAD/CABLE TOOL (Ref#14972N) 140 cfm air compressor (brand new not installed), 240 Ford 6 cylinder engine on deck, 15 KM King swivel, 4 motor top head (all new), no mud pump, mounted on 1982 International Eagle tandem axle truck with 300 Cummins, air brakes, 2 speed aux trans funk box (not installed), 200’ of 3” rod, stabilizer, subs, breakout wrench. Truck is in excellent condition, rig needs work Price: $40,000 - Michigan

CYCLONE 36 (Ref#12485) F162 Continental gas deck engine, mounted on International truck w/6 cyl gas engine, 49’ derrick, extra hydraulic winch, 5” tools, elevator, 18 new Bucyrus shocks, new blets, 6” diameter, 600’ depth capacity, good condition Price: $75,000 - Michigan

CYCLONE 36 (Ref#14143N) Rebuilt with new clutches, brakes, bearings, bushings, shafts, hardware, shocks, hydraulic lines and valves. Red Seal 4 cylinder gas power unit, complete with cathead and hydraulic tilt bed, like new Price: $90,000 - Ohio

CYCLONE 36 (Ref#12224) Manufactured 1974, Ford 4 cylinder diesel deck engine, mounted on International truckwith gas engine, front and rear hydraulic outriggers, 800 – 1000’ depth capacity. Price: $35,000 - Kentucky

CYCLONE 36 (Ref#10655N) completely rebuilt, 4 cyl Continental gas deck engine, mounted on Ford F600 truck w/gas engine, bailer, string of tools Price: $21,000 - Ohio

CYCLONE 35R CABLE TOOL (Ref#501N) International gas deck engine, mounted on single axle International truck with gas engine, mud pump, bits, bailer, some tools Price: $19,500 - Indiana

COMBINATION TOP HEAD/CABLE TOOL RIG (Ref#10560) converted from 20W to combination cable/top head, 4 cyl Continental deck eng (rebuilt 2000), Sullair 375/125 air compressor, TDH 25,000 in/lbs., mounted on Ford F600 4 x 4 truck with 370 Cummins engine, 540’ of 3-1/2” drill rod, excellent condition, currently drilling Price: $83,000 - Washington

CYCLONE 35 (Ref#5137N) 3 line machine, 35’ telescoping derrick, 3 hydr jacks, hydraulic cathead, hydraulic 2 x 2” Monarch jetting pump, 4 cylinder gas Ford deck engine with 3 speed transmission with reverse, rig set up for solid tools or jetting, mounted on 1979 #1724 IHC truck with V8 gas engine, 5 speed transmission, 2 speed rear axle, cab fair, truck runs good, Price: $24,000 - Michigan

CYCLONE 35 (Ref#1760N) trailer mounted, Continental gas engine, tooled for 3” and 4” Price: $18,000

CYCLONE 35R (Ref#9360N) combination rig, in line 6 deck engine, mounted on 1992 GMC Topkick with 427 gas engine, 5 x 6 Gardner Denver mud pump, 185 CFM air compressor, 18’ Kelly, 4” retractable table, hydraulic pulldown, mechanical clutches, 1 front & 2 rear hydraulic leveling jacks

1994 GMC WATER TRUCK, 1000 gallon flat poly tank, Cat engine, front winch, toolboxes, no crane or welder

Package Price: $100,000

CYCLONE 35R COMBINATION CABLE TOOL/KELLY (Ref#6274Nc) 20’ fluted kelly, 1972 172 Ford gas deck engine, mounted on F8000 truck with Detroit engine, 5-1/4” retractable ktable, 3 x 4 centrifugal pump, no air, 200’ of 2-7/8 x 15 Mayhew rod, 2 rear racks Price: $45,000 – Michigan

CYCLONE 35R COMBINATION ROTARY/CABLE TOOLS (Ref#2215N) rebuilt Ford disel deck engine, 5-1/2 x 8 Gardner Denver mud pump, developmental air compressor, mounted on 1988 International tandem axle truck with Cummins engine, 7-1/2” retractable table, pulldown, mechanical clutches, extended factory derrick, 20’ Kelly, breakout wrench, Miller welder, 3 hyd leveling jacks, 300’ of 2-7/8” x 20’ drill pipe. Ready to drill Price: $57,000 - Florida

CYCLONE 35 / TH50 (Ref#4475N) Mounted on 1973 Ford 6 wheel drive, 36 HD engine, new tires, Gardner Denver 5 x 6 mud pump, air compressor, 3” x 15’ rod with Mayhew Jr threads.

1981 Ford Tulsa 8’ flatbed, 1200 gallon flat tank, 200 amp arc welder

Price for both~~: $55,000~~ REDUCED TO: $35,000

CYCLONE 36 PACKAGE (Ref#15535)

1974 Cylcone 36 mounted on 1974 Ford truck, 172 Ford Industrial engine, hydraulic boom, 6” tools

1964 Cyclone 36 mounted on 1970 International truck, 172 Ford Industrial engine, hydraulic boom, 6” tools

1974 Cylcone 36 for pars

Package Price: $58,500 – New York

TH50 CYCLONE/INGERSOLL RAND (Ref#15436) Manufactured 1972, 5x6 Failing mud pump, 2-stage IR 580/360 aircompressor, high torque 4 motor topdrive, mounted on Chevy 9500 tandem axle truck with 671 Detroit engine, PTO, 3 leveling jacks, handling tools, new shaleshaker, 400’ pipe (200’ of heavy wall, 200’ of reg pipe), bits, subs, excellent condition Price: $100,000 - Canada

CYCLONE 36 (Ref#8150) Manufactured 1963, spudding rig powered b 2.3 liter Ford engine, 4 speed transmission (new), mounted on 1973 Chevy C60 with fairly new Ford 2.3 1. engine and transmission, bailer, welder, combo sockets, extras, owner retired Price: $18,000 – New York

CYCLONE 36A (Ref#10498) combination auger/cable tool, 4 cyl Ford Industrial deck engine, mounted on 1992 International 2900 with 466 International diesel engine, 38’ hydraulic mast, 2 rear jacks, 2 front jacks, 100’ of augers, tooled for 4”, Price: $50,000 - Michigan

SANDERSON CYCLONE 36 COMBINATION ROTARY/CABLE (Ref#10679) kelly drive / cable tool, Manufactured 1971, PTO, mounted on 1963 all-wheel drive Mack truck with Ford power unit, 450/250 LeRoi compressor, 200’ of 2-7/8” x 15’ drill pipe, bits, no tools, good condition, current working Price: $30,000 – New York

CYCLONE 35 (Ref#5092N) Ford Industrial gas deck engine, mounted on 1962 Chevy truck with gas engine, 1” and 2” rods, 2 rear mechanical jacks, tooled for 2” and 4”, 3 line machine Price on Request

CYCLONE 35R (Ref#2400N) 4 cyl Ford gas deck engine, mounted on 1988 Ford F800 single axle truck, pull behind compressor, rebuilt 5-1/4” retractable tble, Bean wter injection, 10’ stabilizer, 3 hydraulic leveling jacks, new jackshaft, clutches, gears, etc, some tools, 240’ of 2-7/8” x 20’ Mayhew Jr pipe, currently drilling, good condition Price: $55,000 - Florida

CYCLONE 35 (Ref#12689) mounted on 1978 Ford truck, GR pump hoist, telescoping derrick, all hydraulic, 1000 gal stainless steel water tank, gas engine, excellent condition, tools Price: $50,000 - Oregon

CYCLONE 35R (Ref#8083) Manufactured 1972, 3 line machine, 2 x 2 diaphragm pump, 4-1/2 x 5 mud pump, 125/100 LeRoi compressor for developmental air, PTO will not carry compressor, 36” breakout wrench, single axle Chevy-C-70 truck propane/gas Price: $55,000 - Florida

CYCLONE 35R (Ref#9877) combination cable/rotary, Manufactured 1970, 2 x 3 centrifugal mud pump, mounted on 1985 GMC truck with diesel engine, 4 cylinder Ford Industrial engine on deck, 230’ drill pipe, retractable table, excellent condition Price: $40,000 - Indiana

CYCLONE 35R COMBINATION ROTARY/SPUDDER RIG (Ref#12427Na) Manufactured 1964, mounted on 1992 International 4900 tandem axle truck with DT466 engine, (2) Ford 4 cylinder Industrial gas deck engines, DT466 engine in truck, 5 x 6 Gardner Denver mud pump, 28’ mast, 4-1/2” retractable table, mud pit, 2 line machine, 235’ 2-7/8” x 15’ pipe Price: $50,000

CYCLONE 35 (Ref#421N) mounted on 1966 International truck (need to replace truck), gas 4 cyl International engine, hammer Price: $14,500 - Michigan

CYCLONE 35 (Ref#14612) mounted on 1968 Chevy w/4” tools Price on Request - Ohio

CYCLONE 30 (Ref#5532N) 2 available, skid mounted units with 4 cylinder Ford industrial engine converted to propane, crown sheaves, sandreel and bullreel, bits, subs, bailers, etc Price: $30,000 each - Illinois

CYCLONE 30 ELEVATOR RIG (Ref#15171) 172 hp Ford Ind gas engine, detachable wheels, all covers and cables, bailer, many tools, good condition, currently drilling Price: $35,000 - Kentucky

CYCLONE 28 (Ref#7918N) Gas deck engine, mounted on 75 Dodge with gas engine, tooled up for 6”, 1 front & 2 rear hydraulic leveling jacks Price: $18,000 – Wisconsin

SANDERSON CYCLONE CABLE TOOL (Ref#10968N) 2 line, Red Seal 4 cyl propane engine on deck, mounted on 1967 International tandem axle truck with gas engine, 1 bad tire, cathead, 3” bailer, approx 30’ mast, various tools Price: $27,500

CYCLONE COMBINATION RIG (Ref#10460) cable tool/table drive, dual 600/200 air compressor (PTO driven), 70 hp Ford diesel on deck, 8” table, 2 hydraulic systems, truck is in poor condition Price: $18,000 – New York

CYCLONE COMBINATION ROTARY/SPUDDER RIG (Ref#9491N) mounted on 1979 C70 Chevy truck with V8 gas engine, 4 cyl Ford Industrial deck engine, 600/150 piston air compressor, 5 x 6 mud pump, 150’ drill rod, some tools Price: $27,000 - Ohio

CYCLONE 5 CABLE TOOL RIG (Ref#12863) Manufactured Late 1960’s, Early 1970’s, 4 cyl Ford gas deck engine, mounted on 1985 Chevy K30 single axle 4 wheel drive w/350 gas engine, toolbox, pipe rack, 275 gal steel water tank Price: $18,500 – New York

CYCLONE 5 CABLE TOOL RIG (Ref#6274Nd) mounted on 1979 Ford pickup with gas engine, 2 line machine, needs deck engine, no tools, no leveling jacks Make Offer - Michigan

SHOP BUILT CABLE TOOL/SWAB RIG (Ref#10188) triple drum, friction clutch, cathead (sandline holds 2400’ of 5/8” line), mounted on tandem axle Chevy truck with 427 gasoline engine, 8-5/8” x 45’ single pole, new tires, power steering, wireline unit, good usable rig for shallow oil/gas lease, drills, workover, swab capabilities, no tools Price: $70,000 - Oklahoma

FORT WORTH SPUDDER RIG (Ref#9159N) late 1930’s rig, gas engine on deck, mounted on trailer, bailing tools, bit wrenches, main line, bailing line, operating condition Price: $15,000 - Texas

SHOP BUILT COMBINATION CABLE/MUD ROTARY RIG (Ref#2458Na) Isuzu diesel deck engine, mounted on 1998 GMC Topdick with Cat diesel engine, Wheatley 4 x 5 mudpump, LeRoi developmental air compressor, mud mixer, walking beam, stabilizer, hammer, bits, subs, etc., 4 hyd leveling jacks, 200’ of 2-3/8” x 10’ N rods, some tools Price: $95,000

ONE LOT OF CABLE TOOLS (Ref#1864N)

STEMS

3 Ľ x 4 Ľ pin and box 6 in x 14

3 ľ pin 5 box 5 in x 20 ft good

3 ľ pin 5 box 5 in x 20 ft

3 ľ pin, 5 box 5 in x 22 ft

3 ľ pin, 4 Ľ box 5 in x 26 ft

2 ˝ x 3 ˝ pin and box 5 in x 22 ft

2 ˝ x 3 ˝ pin and box 4 ˝ x 10 ft weld around box

2 ľ x 3 ľ pin and box 4 ˝ x 10 ft

2 in x 20 ft bit end with socket

2 ˝ x 16 ft with rope socket, 5ft 3 in bit, and wrenches

WRENCHES

5 in square

4 ˝ square

4 in square

BITS 4x5

12 in body x 6 ft x 2

8 in body x 5 ˝ ft x 2

8 in body x 5 ft x 2

8 in body x 6 ft

BITS 3 Ľ x 4 Ľ

8 in x 5 ft

10 in x 5 ˝ ft

6 ˝ in x 5 ft x3

BITS 2 ľ X 3 ľ

12 in x 4 ft

5 in x 4 ˝ ft x 2

5 in x 5 ft

5 in x 5 ˝ ft x 2

5 in x 6 ft

6 in x 6 ˝ ft

8 in x 4 ft

BITS 2 ˝ x 3 ˝

5 in x 3 ˝ ft

5 in x 4 ˝ ft x 2

6 in x 3 ft x 4

6 in x 3 ˝

7 in x 3 ˝

8 in x 5 ft

BITS 1 ˝ X 2 ˝

3 ˝ in x 3 ft x 2

3 ˝ in x 4 ft x 2

JARS

5 ˝ od drilling 3 ľ jt

5 ˝ od fishing 48 in stroke 3 ľ jt

3 ˝ od drilling 2 ˝ jt

SAND PUMPS

5 ˝ in x 10 ft Rod type

3 ˝ in x 28 ft wire type

SCOWS

10 in x 24 ft 3 ľ pin

11 in x 14 ft 3 ľ pin

14 in x 12 ft NO PIN

14 in x 20 ft 2 ľ pin

BAILERS

3 ˝ in x 20 ft dart valve

4 ˝ in x 17 ft dart valve

4 ˝ in x 23 ft dart valve

5 in x 20 ft dart valve

6 5/8 in x 14 ft dart valve x 3

6 5/8 in x 13 ft flat bottom

7 in x 20 ft dart valve

7 in x 24 ft dart valve

7 in x 36 ft dart valve

9 in x 16 ft dart valve

9 in x 25 ft dart valve

10 in x 13 ft flat bottom x 2

10 in x 12 ft dart valve

10 in x 15 ft flat bottom

12 in x 13 ft flat bottom

14 in x 12 ft dart valve

14 in x 14 ft dart valve

14 in x 14 ft flat bottom

LINER DRIVERS

for inside 10 in. casing 2 ľ pin

for inside 12 in casing 3 in pin

BUMPER BARS

4 in. round shank

3 in. round shank

LATCH JACKS

8 in od 2 ľ pin

6 ˝ in od 2 ľ pin

5 in od 2 ľ pin Homemade

5 ˝ in od 3 in pin x 2

WIRE SPEARS

Single leg 3 ľ pin

Single leg 2 ˝ pin

2 leg 2 ˝ pin

FISHING SOCKETS

Slip socket body 2 ˝ pin

Friction socket 3 ľ pin

PIPE SWEDGES

11 ˝ in od 3 ˝ pin

7 in od 3 ˝ pin

8 ˝ in od 3 ˝ pin

DRIVE CLAMPS, PLATES, AND HEADS

4 in square regular pattern

4 in square heavy pattern

4 in square extra heavy pattern

drive head 6 in

drive head 8 in

drive plate 15 Ľ diameter x 2 in

drive plate 21 in x 3 in

drive plate 20 ˝ in x 2 in

drive plate 17 ˝ in x 2 in

drive shoes 6 in x 3

MILLS KNIFE PERFORATOR

8 in with extra backs

16 in

SUBS

3 ˝ pin x 3 in box

3 ľ pin x 3 ˝ box

3 ľ pin x 3 in box

3 in pin x 2 ˝ box

MISCELLANEOUS

circle jacks x 3

swab or surge tool with 12 in and 16 in plates and rubbers 2 ľ pin

bit ram 250 lb.

24 in sheave DRH Johnson block 30 ton @ 4:1 rating 1 3/8 line

Drilling drum divider for 22-W

Pitman for 28-L

Tool guide for 60-L

TOTAL LOT PRICE: $25,000

Tel: 516-536-7375 Fax: 516-536-7317 rigs@sunmachinery.com