SUN MACHINERY CORP

SUN MACHINERY CORP

Telephone: (516) 536 7375 Fax: (516) 536 7317

These rigs are located at various locations through out the USA and Internationally.

COIL TUBING UNITS

COILED TUBING UNIT (Ref#10283R) 2005 Peterbuilt 378 tri axle rear C15 CAT with air shut down, Class II Hydraco coil unit, 1,000,000 BTU Hotsy boiler, diesel fired with 100 gallon fuel tank and hose reels, 2011 12 x 8 insulated trailer, Honda 3000 watt Genset, 20,000 lbs injector heads, push pull c/w lift frame and guide arch, 3” BOP, 903-HYD 600-2000, 14,000 kpa or 2,000 psi @750cfm c/w drive pulleys and belt, soap system 200 gallon water tank, 3,000 psi/14 gpm, CAT pump, hydraulic drive, control and relief valves, tubing reel- split reel capacity 800 m³ ¾” tbg and 1500 1 ¼” tbg c/w caliper brake, hydraulic drive motor, high pressure piping and hydraulic spooling cylinder (0 – 180 feet/minute), 5000# manifold, catch tanks hold up to 10m³ with de-gasser and line pipe, side spooler, power spooler, crane 13.5 MT load, max reach, cement mixer/pump

PRICE: $680,000 CANADIAN DOLLARS

2004 KENWORTH COILED TUBING UNIT (Ref#7481R) 35,000 lbs pull/snub capacity, 1-1/4” to 2” tubing size range, dual speed injector, tilting arch, capable of 2100m of 1-1/2” or 3100m of 1-1/4” of 1600m of 1-3/4”, 600 cfm Hurricane compressor, triplex pump with max output of 80L/minute and 4000 psi, truck has 110,000km, compressor has 3200 hours Price: $645,000

MARITIME HYDRAULICS COILED TUBING/COILED TUBING DRILLING UNIT (Ref#10229R)

Manufactured April 2000, Model Number 295D001

(3) piece system: Trailer mounted mast style unit, with support skid container and skidded pipe rack/cat walk.

64’ x 100,000# mast

Maritime RS100 - 100,000# injector head

Two drop in reel assemblies: (1) 4500’ of 2.875” OD coiled tubing, (1) 400’ of 2.875”

Peerless tri-axle, 54’ long Model CH-48-12S carries the mast, Cummins hydraulic power pack, reel, control console and injector head, 3 hydraulics leveling jacks.

Two axle jeep attaches to the rear of the unit

Control console hydraulically elevates for view over top of installed reel and is retracted for transport.

Support skid with 1256 gal fuel storage, 163 bbl fresh water storage, tool room, change room with Ingersoll Rand 15 hp electric 50 cfm/150 psi air compressor, generator room with 250 kw rig generator and blow out preventer accumulator system. Accumulator system has electric triplex make up pump and nitrogen backup system (no nitrogen bottles included).

Water and diesel storages tanks fitted with electrically powered centrifugal pumps

BOP system: (1) Townsend 7-1/16” 5,000 psi single ram, (1) Townsend 7-1/16” 3,000 psi single ram, (1) Rongsheng (China) 7-1/16” 5,000 annular preventer., (1) 4-1/16” 5,000 CT side door stripper.

Pipe rack/cat walk/rig floor combination skid hydraulically moves the rig floor into place behind mast trailer.

Price: $750,000

1995 MACK COILED TUBING UNIT (Ref#12548Ra)

890,000 km (535,000 miles), 859 hours on compressor, 330 cfm compressor, DA20k injector, 1200 meters or 4000 ft. pipe cabacity 1 1/4"

PRICE: $125,000

1994 WESTERN STAR COILED TUBING UNIT (Ref#12548Rb)

CAT 3406c, 1,015,000 km (620,000 miles), less than 1000 hours on compressor, 660 cfm nw compressor, DA CF15 injector, 1400 meter or 4500 ft. pipe capacity 1 1/4"

PRICE: $185,000

1994 MACH COILED TUBING UNIT (Ref#12548Rc)

616000 km (380,000 miles), 529 hours on compressor, 330 cCFM compressor, Hiab picker.

PRICE: $145,000

1996 WESTERN STAR COILED TUBING UNIT (Ref#12548Rd)

Detroit Series 60, 311000 km (185000 miles), 873 hours on compressor, 330 CFM compressor, DA manufacturing CF20 injector, 20000 lb rating.

PRICE: $145,000

AKER MARITIME 295 COILED TUBING RIG (Ref#4254N) Maritime hydraulics 295D001 coiled tubing rig, Lantec LW330 hydraulic drawworks w/7/8” line, powered by Cummins N14 diesel engine with electric start, radiator, Allison CLT-755 transmission, Lima 18 kw AC generator, Maritime 62’ high mast 100,000# static hook load with crown sheaves, hydraulically raised, (2) 4-stage raising rams. Maritime Hydraulics RT100S303D100 injector head with 100,000# max pulldown, 40,000# max snubbing. Maritime hydraulics 295D300 8’5”W x 9’4”L control cabin with Pason drilling system, Maritime hydraulics 295D100 tubing reel, Nov 295D100 additional tubing reel, Maritime hydraulics 295D400 power unit, Vanoil 4-1/16” stripper with side door, Vanoil 2” rotating joint, mounted on Peerless CH-48-3S 54’L tri axle trailer with 11R24.5 tires, END Drill Systems 16” rotary table,

Torus annular blowout preventor 7” x 3M,

Shopbuilt 8’W x 16’L doghouse with lockers, knowledge box, lights, skidded. Shopbuilt 8’W x 10’L parts house with parts bins, lights, mounted catwalk trailer.

Cat SR-4 205kw AC generators p/b Caterpillar 3306 diesel engine with electric start, radiator, gauges. Quincy QSF-60 air compressor p/b Baldor 50 hp electric motor. Shopbuilt electrical panels. Square D 75 ka transformer.

10’W x 6’H x 38’L 391 bbl tandem axle mud tank with 15’L mud house, top mounted walkways, safety rails, lights.

Mission 4 x 5” centrifugal pump p/bBaldor 50 hp electric motor.

Derrick single, single screen linear motion shale shaker.

Water/Fuel tanks: shop built 12’W x 8’H x 12’L 345 bbl water tank, mounted utility house skid.

Shopbuilt 16’W x 8’H x 12’L 4,150 gal fuel tank, mounted on utility house skid.

BV type LF rotary tongs

BJ CTS power tongs

9’W x 50’L tandem axle hydraulic catwalk trailer

A17 degree survey tool

OPI 700 DL Triplex piston pump, rated 700 bhp@1500 rpm, max pressure 4,000 lb., Detroit diesel pump engine 12V71T 500hp @ 2200 rpm, skidded with metal shed

Price: $1,050,000

NATIONAL MODEL 295 COILED TUBING RIG (Ref#7138R)

Rated Capacity of 1200 meters with 2 7/8 inch coiled tubing
Reel can accommodate 2 3/8 inch and 3 1/2 inch tubing
INJECTOR
National oil well RT100 100000 lb hoist 17800 lb snub force
Lifting structure
New van oil 2 7/8 side loading pack off
Pivoting and folding goose neck with hydraulic gates
Injector is completely rebuilt Stimline Services Inc
REEL
Level line with auto spooler
New van oil rotating joint
Pumping iron inside reel and 2” and 3” valves
1140 meters 2 7/8 tubing schedule 80 new condition
MUDPUMP
2004 D.P. 800 Weatherford triplex with new drive, 3412 cat powered (3412 dyno and load tested).
Selection of 5” and 5.5” liners with fluid end expendables
New 15 hp upright air compressor
High Pressure Air Equipment - 750 cfm, 2300 p.s.i. hurricane 4-stage compressor (blow coil)
New Magi Kist wash down
New pump house building
MUDTANK
New Brandt Mini Cobra flow line cleaner
New 40m3 custom mud tank with two 50hp mission magnum pumps
New electric chemical barrel
Two new mixing hoppers
BLOWOUT PREVENTION EQUIPMENT - NACE
New 7 1/16 N.E.I. annular
New 7 1/16 N.E.I. blind ram
Re-certified 7 1/16 Townsend pipe ram
Re-certified H.C.R., kill valves and hoses
Drilling spool
SAFETY TRAILER
Equipped and skidded for Bobcat
- 2 –
DRILLING RIG TRAILER
Tridem Peerless Page Trailer
Mast structure
Hydraulic drawworks
Two trailer winches
Traverse motor and gear box assembly
Six hydraulic leveling jacks with 1 meter stroke
All winch and drilling line is new
CONTROL CAB
Hydraulic cab lift system
Air over hydraulic BOP remote panel
Pressure recording panel
Pason monitoring system
Injector function controls
Remote fluid pump controls
HYDRAULIC SYSTEM
Cummins deck engine
Hydraulic gear box
Hydraulic oil storage tank with high/low pressure filtering system and high temp/low level alarms
Hydraulic cooling system
Pro start heater for deck engine (re-serviced)
New Dennison and Sauer pumps
CATWALK SKID
Hydraulic lifting floor on rollers with adjusting V-door
Hydraulic winch
Hydraulic lifting beaver tail
Storage compartments
New pro-coat floor covering system
New stabbing and inside BOP valves with certified drill collar lifting subs
COMBINATION BUILDING
New building with fuel and water storage, tool house, change shack, gen set (325 kVa), 3306 cat (dyno and load tested) and new N.E.I accumulator (4 station, 40 gal.)
DRILL COLLARS
Four new 4 ¾” with pickup subs
RIG
Rig is seven compact loads for quick and efficient move times and expense
Tanks, B.O.P.’s, buildings and rig are plumbed in and functioning
This coil tubing drilling rig is basically new and is best used with a casing pre-set rig

PRICE: $3,150,000

NATIONAL OILWELL RT-100 COILED TUBING RIG (Ref#3387N)

Rated Capacity of 1200 meters with 2 7/8” coiled tubing

Reel can accommodate 2 3/8” and 3 ½” tubing

INJECTOR

National oil well RT-100, 100,000 lb hoist, 17,800 lb snub force

Lifting structure

New van oil 2 7/8 side loading pack off

Pivoting and folding goose neck with hydraulic gates

Injector is completely rebuilt (Stimline Services Inc.)

REEL

Level line with auto spooler

New van oil rotating joint

Pumping iron inside reel and 2” and 3” valves

1140 meters 2 7/8 tubing (sched 80) new condition

MUD PUMP

2004 D.P. 800 Weatherford triplex with new drive, 3412 cat powered (3412 dyno and load tested).

Selection of 5” and 5.5” liners with fluid end expendables

New 15 hp upright air compressor

750 cfm, 2300 p.s.i. hurricane 4-stage compressor (blow coil)

New Magikist wash down

New pumphouse building

MUDTANK

New Brandt Mini Cobra flow line cleaner

New 40m3 custom mud tank with two 50hp mission magnum pumps

New electric chemical barrel

Two new mixing hoppers

BLOWOUT PREVENTION EQUIPMENT - NACE

New 7 1/16 N.E.I. annular

New 7 1/16 N.E.I. blind ram

Re-certified 7 1/16 Townsend pipe ram

Re-certified H.C.R., kill valves and hoses

Drilling spool

SAFETY TRAILER

Equipped and skidded for Bobcat

DRILLING RIG TRAILER

Tridem Peerless PageTrailer

Mast structure

Hydraulic drawworks

Two trailer winches

Traverse motor and gear box assembly

Six hydraulic leveling jacks with 1 meter stroke

All winch and drilling line is new

CONTROL CAB

Hydraulic cab lift system

Air over hydraulic BOP remote panel

Pressure recording panel

Pason monitoring system

Injector function controls

Remote fluid pump controls

HYDRAULIC SYSTEM

Cummins deck engine

Hydraulic gear box

Hydraulic oil storage tank with high/low pressure filtering system and high temp/low level alarms

Hydraulic cooling system

Pro start heater for deck engine (re-serviced)

New Dennison and Sauer pumps

CATWALK SKID

Hydraulic lifting floor on rollers with adjusting V-door

Hydraulic winch

Hydraulic lifting beaver tail

Storage compartments

New pro-coat floor covering system

New stabbing and inside BOP valves with certified drill collar lifting subs

COMBO BUILDING

New building with fuel and water storage, tool house, change shack, gen set (325 kva), 3306 cat (dyno and load tested) and new N.E.I accumulator (4 station, 40 gal.)

DRILL COLLARS

Four new 4 ¾” with pickup subs

RIG

Rig is seven compact loads for quick and efficient move times and expense

Tanks, B.O.P.’s, buildings and rig are plumbed in and functioning

This coil tubing drilling rig is basically new and is best utilized with a preset surface casing rig.

PRICE: $5,000,000